Message	Event Log	Event ID	Event Source	Event Type
The operation completed successfully.\r\n	System	0	Kernel	Success
The returned data is valid.\r\n	System	0	PDH	Success
Starting Microsoft DNS Server (NT4.0 ServicePack6 October 1999).\r\n	DNS Server	0	DNS	Information
Unable to create the symbolic link from %2 -> %3.\r\n	System	1	Digiboard	Warning
FTP Server could not initialize its security.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	1	MSFTPSVC	Error
Not enough memory was available to allocate internal storage needed for the device %1.\r\n	System	1	i8042prt	Error
User %1 was granted access.%n\r\nFully-Qualified-User-Name = %2%n\r\nNAS-IP-Address = %3%n\r\nNAS-Identifier = %4%n\r\nClient-Friendly-Name = %5%n\r\nClient-IP-Address = %6%n\r\nNAS-Port-Type = %7%n\r\nNAS-Port = %8%n\r\nPolicy-Name = %9%n\r\nAuthenticati	Application	1	IAS	Information
Not enough memory was available to allocate internal storage needed for the device %1.\r\n	System	1	inport	Error
A retry was successful on %1.\r\n	System	1	Various	Information
Incorrect function.\r\n	System	1	Kernel	Error
IIS Logging for %1 has been shutdown because a disk full error has been encountered.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	1	IIS	Error
Static Store Error: %1\r\n	System	1	U2DS static store	Error
Not implemented\r\n	Application	1	COM+	Error
Not enough memory was available to allocate internal storage needed for the device %1.\r\n	System	1	mouclass	Error
System Events\r\n	System	1	MacPrint	Information
Not enough memory was available to allocate internal storage needed for the device %1.\r\n	System	1	parvdm	Error
The return data value is valid and different from the last sample.\r\n	System	1	PDH	Success
CI Service\r\n	Application	1	Ci	Information
An internal consistency check failed.\r\n	System	1	SmartCard	Error
Not used\r\nUnable to bind to a adapter when in routing configuration.\r\n	System	1	AppleTalk	Error
dmio: Device %2,%3: Received spurious close\r\n	System	1	disk	Warning
Starting Microsoft DNS Server (Windows2000 RC2 August 1999).\r\n	DNS Server	1	DNS	Information
%1: ACPI Name Space Object %2 reports an _ADR (%3) that is already in use.\r\nSuch conflicts are not legal. Please contact your system vendor for\r\ntechnical assistance.\r\n	System	1	acpi	Error
Denali successfully installed.\r\n	System	1	ASP	Information
Insufficient buffer size, unable to proceed.\r\n	System	1	ati	Error
Certificate Services configuration information is corrupted.\r\n	Application	1	Certificate Server	Error
Out of memory initializing %1.  %2.\r\n	Application	1	Certificate Server	Error
Unable to add registry key and/or value to HARDWARE\\DEVICEMAP\\%2.\r\n	System	2	Digiboard	Warning
Database Page Cache\r\n	System	2	EDB500	Information
Not enough memory was available to allocate the ring buffer that holds incoming data for %1.\r\n	System	2	i8042prt	Error
User %1 was denied access.%n\r\nFully-Qualified-User-Name = %2%n\r\nNAS-IP-Address = %3%n\r\nNAS-Identifier = %4%n\r\nCalled-Station-Identifier = %5%n\r\nCalling-Station-Identifier = %6%n\r\nClient-Friendly-Name = %7%n\r\nClient-IP-Address = %8%n\r\nNAS-P	Application	2	IAS	Warning
Not enough memory was available to allocate the ring buffer that holds incoming data for %1.\r\n	System	2	inport	Error
The driver could not allocate something necessary for the request for %1.\r\n	System	2	Various	Error
The system cannot find the file specified.\r\n	System	2	Kernel	Error
IIS Logging was unable to create the directory %1.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	2	IIS	Error
Microsoft LDAP Static Store DLL Load Failed\r\n	System	2	U2DS static store	Error
Ran out of memory\r\n	Application	2	COM+	Error
Not enough memory was available to allocate the ring buffer that holds incoming data for %1.\r\n	System	2	mouclass	Error
Administrative Events\r\n	System	2	MacPrint	Information
Unable to get device object pointer for port object.\r\n	System	2	parvdm	Error
The action was cancelled by an SCardCancel request.\r\n	System	2	SmartCard	Error
Not used\r\nUnable to bind the ARAP adapter\r\n	System	2	AppleTalk	Error
dmio: Failed to log the detach of the DRL volume %2\r\n	System	2	disk	Warning
The DNS server has started.\r\n	DNS Server	2	DNS	Information
%1: ACPI Name Space Object %2 reports an _HID (%3) that is already in use.\r\nSuch conflicts are not legal. Please contact your system vendor for\r\ntechnical assistance.\r\n	System	2	acpi	Error
Denali successfully removed.\r\n	System	2	ASP	Information
Unable to map required address ranges for graphics card.\r\n	System	2	ati	Error
Could not decrypt request\r\n	Application	2	Certificate Server	Warning
Administrative\r\n	System	2	MacPrint	Information
Transmit buffer on port %2 isn't drained!  (%3)\r\n	System	3	Digiboard	Warning
Logging/Recovery\r\n	System	3	EDB500	Information
FTP Server could not initialize the socket library.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	3	MSFTPSVC	Error
The hardware locations for %1 could not be translated to something the memory management system understands.\r\n	System	3	i8042prt	Error
Access request for user %1 was discarded.%n\r\nFully-Qualified-User-Name = %2%n\r\nNAS-IP-Address = %3%n\r\nNAS-Identifier = %4%n\r\nCalled-Station-Identifier = %5%n\r\nCalling-Station-Identifier = %6%n\r\nClient-Friendly-Name = %7%n\r\nClient-IP-Address	Application	3	IAS	Error
The hardware locations for %1 could not be translated to something the memory management system understands.\r\n	System	3	inport	Error
Driver or device is incorrectly configured for %1.\r\n	System	3	Various	Error
The system cannot find the path specified.\r\n	System	3	Kernel	Error
IIS Logging was unable to create the file %1.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	3	IIS	Error
Microsoft LDAP Static Store DLL Loaded\r\n	System	3	U2DS static store	Information
One or more arguments are invalid\r\n	Application	3	COM+	Error
Some firmware configuration information was incomplete, so defaults were used.\r\n	System	3	mouclass	Information
Usage Events\r\n	System	3	MacPrint	Information
The supplied handle was invalid.\r\n	System	3	SmartCard	Error
Unable to create the symbolic link for %1.\r\n	System	3	parvdm	Warning
Not used\r\nUnable to retrieve ARAP adapter info\r\n	System	3	AppleTalk	Error
dmio: DRL volume %2 is detached\r\n	System	3	disk	Warning
The DNS server has shutdown.\r\n	DNS Server	3	DNS	Information
%1: ACPI Bios claims that the machine has suffered a fatal error and needs to\r\nbe shutdown as quickly as possible. Please contact your system vendor for\r\ntechnical assistance.	System	3	acpi	Error
Service started.\r\n	System	3	ASP	Information
Unable to obtain configuration information for graphics card.\r\n	System	3	ati	Error
The Issuing Certificate could not be found.  The Certificate Services may need to be reinstalled.\r\n	Application	3	Certificate Server	Error
Request failed.\r\n	Application	3	Certificate Server	Warning
Performance\r\n	System	4	EDB500	Information
Not enough memory was available to allocate internal storage needed for the device %1.\r\n	System	4	Digiboard	Warning
FTP Server was unable to initialize due to a shortage of available memory.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect	System	4	MSFTPSVC	Error
The hardware resources for %1 are already in use by another device.\r\n	System	4	i8042prt	Error
The hardware resources for %1 are already in use by another device.\r\n	System	4	inport	Error
Driver detected an internal error in its data structures for %1.\r\n	System	4	Various	Error
The system cannot open the file.\r\n	System	4	Kernel	Error
IIS Logging for %1 was resumed.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	4	IIS	Information
No such interface supported\r\n	Application	4	COM+	Error
User configuration data is overriding firmware configuration data.\r\n	System	4	mouclass	Information
Not used\r\nConfiguration Events\r\n	System	4	MacPrint	Information
One or more of the supplied parameters could not be properly interpreted.\r\n	System	4	SmartCard	Error
The PCMCIA tuple information for the PCCARD in socket %2 could not be parsed.\r\n	System	4	pcmcia	Error
Unable to initialize interrupt object for %1.\r\n	System	4	parvdm	Warning
Unable to register name for node on adapter "%2". \r\nEither the name is already in use on the network or is longer \r\nthan 32 characters long.\r\nChange the name of the adapter to a valid one. \r\nUnbind and rebind Appletalk protocol on the ad	System	4	AppleTalk	Warning
dmio: %2 error on %3 %4 of volume %5 offset %6 length %7\r\n	System	4	disk	Warning
Service stopped.\r\n	System	4	ASP	Information
LFB Aperture conflict, disabling aperture.\r\n	System	4	ati	Warning
Certificate Services could not find required Active Directory information.\r\n	Application	4	Certificate Server	Error
Could not get subject name for a new certificate.\r\n	Application	4	Certificate Server	Warning
Not used\r\nConfiguration\r\n	System	4	MacPrint	Information
Database Repair\r\n	System	5	EDB500	Information
The I/O ports for adapter %2 could not be translated to something the memory management system could understand.\r\n	System	5	Digiboard	Error
FTP Server could not locate the FTP/TCP service.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	5	MSFTPSVC	Error
Some firmware configuration information was incomplete, so defaults were used.\r\n	System	5	i8042prt	Information
Digest authentication: stalled authentication for user "%1", realm "%2".\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	5	IISMAP	Error
Some firmware configuration information was incomplete, so defaults were used.\r\n	System	5	inport	Information
A parity error was detected on %1.\r\n	System	5	Various	Error
Access is denied.\r\n	System	5	Kernel	Error
IIS ODBC Logging failed to connect to data source %1. Error text is [%2].\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	5	IIS	Error
Invalid pointer\r\n	Application	5	COM+	Error
Unable to create the device map entry for %1.\r\n	System	5	mouclass	Warning
Registry startup information is missing or invalid.\r\n	System	5	SmartCard	Error
The hardware addresses for %1 are already in use by another device.\r\n	System	5	parport	Error
Interrupt conflict detected for %1.\r\n	System	5	parvdm	Warning
A name was successfully registered for this node via AppleTalk protocol on adapter "%2".\r\n	System	5	AppleTalk	Information
dmio: %2 %3 detached from volume %4\r\n	System	5	disk	Warning
Error: %1.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	5	ASP	Error
The ATIOEM registry entry was found but was not used to configure the adapter.\r\nThe registry entry is either obsolete or invalid.\r\n	System	5	ati	Information
Some firmware configuration information was incomplete, so defaults were used.\r\n	System	5	busmouse	Information
The Certificate Services Policy contains no valid Certificate Templates. \r\n	Application	5	Certificate Server	Warning
Certificate Services could not find required registry information.  The Certificate Services may need to be reinstalled.\r\n	Application	5	Certificate Server	Error
TrueImage Print Processor\r\n	System	5	MacPrint	Information
Resource Failure Simulation\r\n	System	6	EDB500	Information
FTP Server could not create the main connection socket.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	6	MSFTPSVC	Error
User configuration data is overriding firmware configuration data.\r\n	System	6	i8042prt	Information
User configuration data is overriding firmware configuration data.\r\n	System	6	inport	Information
The device, %1, had a seek error.\r\n	System	6	Various	Error
The handle is invalid.\r\n	System	6	Kernel	Error
IIS ODBC Logging failed to log data to data source %1.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	6	IIS	Error
Invalid handle\r\n	Application	6	COM+	Error
Unable to delete the device map entry for %1.\r\n	System	6	mouclass	Warning
Not enough memory available to complete this command.\r\n	System	6	SmartCard	Error
The adapter name specified was greater than the maximum length of 32 characters allowed for adapter "%2".\r\nThe adapter has been initialized with a default port name.\r\nIf you change the adapter name, unbind and rebind Appletalk protocol on th	System	6	AppleTalk	Error
dmio: Overlapping mirror %2 %3 detached from volume %4\r\n	System	6	disk	Warning
Error: %1, %2.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	6	ASP	Error
User configuration data is overriding firmware configuration data.\r\n	System	6	busmouse	Information
The Certificate Services Policy has changed.\r\n	Application	6	Certificate Server	Information
Certificate Services issued a certificate for request %1 for %2.\r\n	Application	6	Certificate Server	Information
Error loading map file %1, error %2.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	6	IISMAP	Error
FTP Server could not create the main connection thread.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	7	MSFTPSVC	Error
Unable to create the device map entry for %1.\r\n	System	7	i8042prt	Warning
Unable to create the device map entry for %1.\r\n	System	7	inport	Warning
The device, %1, has a bad block.\r\n	System	7	Various	Error
The storage control blocks were destroyed.\r\n	System	7	Kernel	Error
IIS ODBC Logging resumed logging to data source %1.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	7	IIS	Information
Operation aborted\r\n	Application	7	COM+	Error
Could not locate the device object for one or more pointer port devices.\r\n	System	7	mouclass	Error
An internal consistency timer has expired.\r\n	System	7	SmartCard	Error
Invalid network range specified for adapter "%2".\r\nAppletalk was not initialized on the adapter.\r\nVerify the values for the Network Range limits for the adapter for AppleTalk Routing are valid using the Routing and Remote Access UI.\r\nIf va	System	7	AppleTalk	Error
dmio: Kernel log full: %2 %3 detached\r\n	System	7	disk	Warning
Error: %1, %2, %3.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	7	ASP	Error
Unable to create the device map entry for %1.\r\n	System	7	busmouse	Warning
The Enrollee (%1) has no DNS name registered in the Active Directory. The certificate cannot be generated.\r\n	Application	7	Certificate Server	Warning
Certificate Services denied request %1 because %2.  The request was for %3.\r\n	Application	7	Certificate Server	Warning
Logon failed for user %1 : %2.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	7	IISMAP	Error
%1 (%2) The database engine %3.%4.%5 started.\r\n	System	8	EDB500	Information
FTP Server could not create a client worker thread for user at host %1.  The connection to this user is terminated.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at:	System	8	MSFTPSVC	Error
Unable to delete the device map entry for %1.\r\n	System	8	i8042prt	Warning
Unable to delete the device map entry for %1.\r\n	System	8	inport	Warning
An overrun occurred on %1.\r\n	System	8	Various	Error
Not enough storage is available to process this command.\r\n	System	8	Kernel	Error
Unspecified error\r\n	Application	8	COM+	Error
Could not connect to port device %1.\r\n	System	8	mouclass	Error
The data buffer to receive returned data is too small for the returned data.\r\n	System	8	SmartCard	Error
The network ranges specified for one or more adapters overlap with those of the\r\nadapter "%2".\r\nAppletalk was not initialized on the adapter.\r\nVerify the values for the Network Range limits for the adapters for AppleTalk Routing are valid	System	8	AppleTalk	Error
dmio: Kernel log update failed: %2 %3 detached\r\n	System	8	disk	Warning
Error: %1, %2, %3, %4.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	8	ASP	Error
Unable to delete the device map entry for %1.\r\n	System	8	busmouse	Warning
The Enrollee (%1) has no E-Mail name registered in the Active Directory.  The E-Mail name will not be included in the certificate.\r\n	Application	8	Certificate Server	Warning
Certificate Services left request %1 pending in the queue for %2.\r\n	Application	8	Certificate Server	Information
Digest authentication: invalid authentication for user "%1", realm "%2".\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	8	IISMAP	Error
%1 (%2) The database engine stopped.\r\n	System	9	EDB500	Information
Registry key %2 could not be opened.  Check current configuration.\r\n	System	9	Digiboard	Error
A call to a system service failed unexpectedly.  The data is the error.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	9	MSFTPSVC	Error
Could not connect the interrupt for %1.\r\n	System	9	i8042prt	Error
Could not connect the interrupt for %1.\r\n	System	9	inport	Error
The device, %1, did not respond within the timeout period.\r\n	System	9	Various	Error
The storage control block address is invalid.\r\n	System	9	Kernel	Error
General access denied error\r\n	Application	9	COM+	Error
Could not enable interrupts on connected port device %1.\r\n	System	9	mouclass	Error
The specified reader name is not recognized.\r\n	System	9	SmartCard	Error
PRAM values for the network range were not within the\r\nnetwork range specified and are being ignored for adapter "%2".\r\n	System	9	AppleTalk	Warning
dmio: detaching RAID-5 %2\r\n	System	9	disk	Warning
Warning: %1.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	9	ASP	Warning
The Enrollee was not able to successfully authenticate to the Certificate Service.  Please check your security settings.\r\n	Application	9	Certificate Server	Error
The Certificate Services did not start: Unable to load an external policy module.\r\n	Application	9	Certificate Server	Error
Digest authentication: unrecognized user "%1", realm "%2".\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	9	IISMAP	Error
%1 (%2) The database engine is starting a full backup.\r\n	System	10	EDB500	Information
Unable to find registry value %2.\r\n	System	10	Digiboard	Error
User %1 at host %2 has timed-out after %3 seconds of inactivity.\r\n	System	10	MSFTPSVC	Warning
The address, %1, of client, %2, could not be resolved. The data is the error code generated by Winsock.\r\n	Application	10	IAS	Error
The ISR has detected an internal state error in the driver for %1.\r\n	System	10	inport	Error
The driver detected an unexpected sequence by the device, %1.\r\n	System	10	Various	Error
The environment is incorrect.\r\n	System	10	Kernel	Error
Memory Allocation Failed\r\n	System	10	U2DS static store	Error
The data necessary to complete this operation is not yet available.\r\n	Application	10	COM+	Error
Could not disable interrupts on connected port device %1.\r\n	System	10	mouclass	Error
The user-specified timeout value has expired.\r\n	System	10	SmartCard	Error
Default zone specified was invalid for adapter "%2".\r\nVerify the value for the Default Zone for the adapter for AppleTalk Routing is valid using the Routing and Remote Access UI.\r\n	System	10	AppleTalk	Error
dmio: object %2 detached from RAID-5 %3 at column %4 offset %5\r\n	System	10	disk	Warning
Warning: %1, %2.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	10	ASP	Warning
The request was for certificate template (%1) that is not supported by the Certificate Services policy.\r\n	Application	10	Certificate Server	Error
Certificate Services were unable to build a new certificate or certificate chain: %1.\r\n	Application	10	Certificate Server	Error
%1 (%2) The database engine is starting an incremental backup.\r\n	System	11	EDB500	Information
Anonymous logon request received from %1 at host %2.\r\n	System	11	MSFTPSVC	Information
The ring buffer that stores incoming keyboard data has overflowed (buffer size is configurable via the registry).\r\n	System	11	i8042prt	Information
The address, %1, of client, %2, is not a valid IP address.\r\n	Application	11	IAS	Error
The driver detected a controller error on %1.\r\n	System	11	Various	Error
An attempt was made to load a program with an incorrect format.\r\n	System	11	Kernel	Error
Memory Allocation Failed.  Additional Info: %1\r\n	System	11	U2DS static store	Error
The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the registry).\r\n	System	11	mouclass	Information
The smart card cannot be accessed because of other connections outstanding.\r\n	System	11	SmartCard	Error
No default zone was specified for adapter "%2".\r\nVerify the value for the Default Zone for the adapter for AppleTalk Routing is valid using the Routing and Remote Access UI.\r\n	System	11	AppleTalk	Error
dmio: RAID-5 %2 entering degraded mode operation\r\n	System	11	disk	Warning
Warning: %1, %2, %3.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	11	ASP	Warning
The request does not contain a certificate template extension or the %1 request attribute.\r\n	Application	11	Certificate Server	Error
Certificate Services did not start: Unable to open the certificate store for %%1.  %2.\r\n	Application	11	Certificate Server	Error
The Certification Authority was unable to publish the certificate for %1 to the Directory Service.  %2 (%3)\r\n	Application	11	Certificate Server	Error
%1 (%2) The database engine has completed the backup successfully.\r\n	System	12	EDB500	Information
User logon request received from %1 at host %2.\r\n	System	12	MSFTPSVC	Information
The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the registry).\r\n	System	12	i8042prt	Information
An internal error occurred while processing a request. The data is the error code.\r\n	Application	12	IAS	Error
The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the registry).\r\n	System	12	inport	Information
The driver detected an internal driver error on %1.\r\n	System	12	Various	Error
The access code is invalid.\r\n	System	12	Kernel	Error
The driver for device %1 encountered an internal driver error.\r\n	System	12	mouclass	Error
The operation requires a Smart Card, but no Smart Card is currently in the device.\r\n	System	12	SmartCard	Error
The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the registry).\r\n	System	12	Srv	Error
Desired zone invalid or not specified.\r\nThe value was ignored and processing was continued.\r\n	System	12	AppleTalk	Error
dmio: Double failure condition detected on RAID-5 %2\r\n	System	12	disk	Warning
Warning: %1, %2, %3, %4.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	12	ASP	Warning
The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the registry).\r\n	System	12	busmouse	Information
The Active Directory containing the Certification Authority no longer exists.\r\n	Application	12	Certificate Server	Error
Certificate Services did not start: Unable to find the CA certificate in the certificate store for %1.  %2.\r\n	Application	12	Certificate Server	Error
The driver could not create the required device object.\r\n	System	13	mouclass	Error
%1 (%2) The database engine has stopped the backup with error %3.\r\n	System	13	EDB500	Information
User %1 failed to log on, could not access the home directory %2.\r\n	System	13	MSFTPSVC	Warning
The Start I/O procedure has detected an internal error in the driver for %1.\r\n	System	13	i8042prt	Error
A request was received from the invalid client IP Address %1.\r\n	Application	13	IAS	Error
The Start I/O procedure has detected an internal error in the driver for %1.\r\n	System	13	inport	Error
The driver was configured with an incorrect interrupt for %1.\r\n	System	13	Various	Error
The data is invalid.\r\n	System	13	Kernel	Error
The specified smart card name is not recognized.\r\n	System	13	SmartCard	Error
An invalid zone name specified in the zone list for adapter "%2".\r\nThe error was ignored and processing was continued.\r\n	System	13	AppleTalk	Error
dmio: Failure in RAID-5 logging operation\r\n	System	13	disk	Warning
The Start I/O procedure has detected an internal error in the driver for %1.\r\n	System	13	busmouse	Error
Certificate Services did not start: Unable to extract key provider information from the CA certificate for %1.  %2.\r\n	Application	13	Certificate Server	Error
The Certification Authority was unable to publish the CRL to the Directory Service.  Publishing will be retried at a later time. %1 (%2)\r\nMicrosoft Corporation	Application	13	Certificate Server	Error
%1 (%2) The database engine is restoring from backup directory %3.\r\n	System	14	EDB500	Information
User %1 denied access to the current directory %2 due to a security change.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	14	MSFTPSVC	Warning
The Initiate I/O procedure has detected an internal state error in the driver for %1.\r\n	System	14	i8042prt	Error
A request was received with an authenticator that is not valid from client %1.\r\n	Application	14	IAS	Error
The Initiate I/O procedure has detected an internal state error in the driver for %1.\r\n	System	14	inport	Error
The driver was configured with an invalid I/O base address for %1.\r\n	System	14	Various	Error
Not enough storage is available to complete this operation.\r\n	System	14	Kernel	Error
The driver could not obtain resources required to create a propper WaitWake IRP.\r\n	System	14	mouclass	Error
The system could not dispose of the media in the requested manner.\r\n	System	14	SmartCard	Error
The default/desired zone name specified is not in the zone list for adapter "%2".\r\nAppletalk was not initialized on the adapter.\r\n	System	14	AppleTalk	Error
dmio: log object %2 detached from RAID-5 %3\r\n	System	14	disk	Warning
The Initiate I/O procedure has detected an internal state error in the driver for %1.\r\n	System	14	busmouse	Error
Certificate Services did not start: Unable to set up a cryptographic context for the CA certificate for %1.  %2.\r\n	Application	14	Certificate Server	Error
A new certificate requested by %2 was issued for%1%3%1\r\nCertificate Type: %4%1\r\nSerial Number: %5%1\r\nCertification Authority: %6 on Server %7%1\r\n	Application	14	Certificate Server	Information
%1 (%2) The database engine has stopped restoring.\r\n	System	15	EDB500	Information
The server was unable to load ODBC32.DLL for sql logging due to the following error: %1 The data is the error code.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.co	System	15	MSFTPSVC	Error
The keyboard reset failed.\r\n	System	15	i8042prt	Error
A malformed request was received from client %1. The data is the packet.\r\n	Application	15	IAS	Error
The device, %1, is not ready for access yet.\r\n	System	15	Various	Error
The system cannot find the drive specified.\r\n	System	15	Kernel	Error
The requested protocols are incompatible with the protocol currently in use with the smart card.\r\n	System	15	SmartCard	Error
No adapter is configured to be the default adapter.\r\nAppletalk was not initialized on any adapter.\r\nServices over AppleTalk e.g. Print Server, File Server etc. will not be \r\nfunctional unless a default adapter is specified.\r\n	System	15	AppleTalk	Error
dmio: check_ilocks: stranded ilock on %2 start %3 len %4\r\n	System	15	disk	Warning
Certificate Services did not start: Version does not match certif.dll.\r\n	Application	15	Certificate Server	Error
The Certification Authority was unable to publish a certificate to the file %1.	Application	15	Certificate Server	Error
%1 (%2) The database is running recovery steps.\r\n	System	16	EDB500	Information
DigiBoard adapter %2 was unable to initialize properly.\r\n	System	16	Digiboard	Error
The mouse reset failed.\r\n	System	16	i8042prt	Error
A packet with type %1, which is not valid, was received on port %2 from client %3.\r\n	Application	16	IAS	Error
The mouse reset failed.\r\n	System	16	inport	Error
The request is incorrectly formatted for %1.\r\n	System	16	Various	Error
The directory cannot be removed.\r\n	System	16	Kernel	Error
The reader or smart card is not ready to accept commands.\r\n	System	16	SmartCard	Error
Not used\r\nAn invalid adapter is configured to be the default adapter "%2". \r\nLocaltalk adapters cannot be a default adapter in a routing configuration.\r\nAppletalk could not be started on the adapter.\r\n	System	16	AppleTalk	Error
dmio: check_ilocks: overlapping ilocks: %2 for %3, %4 for %5\r\n	System	16	disk	Warning
The mouse reset failed.\r\n	System	16	busmouse	Error
Certificate Services did not start: Unable to initialize OLE: %1.\r\n	Application	16	Certificate Server	Error
PRINTF MSG: %1 %2 %3 %4 %5\r\n	System	16	Wins	Information
%1 (%2) Database engine error %3 occurred.\r\n	System	17	EDB500	Error
The device sent an incorrect response(s) following a keyboard reset.\r\n	System	17	i8042prt	Warning
A signature attribute is required in Access-Requests from client %1.\r\n	Application	17	IAS	Error
The wrong version of the driver has been loaded.\r\n	System	17	Various	Error
The system cannot move the file to a different disk drive.\r\n	System	17	Kernel	Error
One or more of the supplied parameters values could not be properly interpreted.\r\n	System	17	SmartCard	Error
Unable to acquire a node on adapter "%2".\r\nAppletalk could not be started on the adapter.\r\n	System	17	AppleTalk	Error
dmio: Illegal vminor encountered\r\n	System	17	disk	Warning
Certificate Services did not start: Unable to initialize the database connection for %1.  %2.\r\n	Application	17	Certificate Server	Error
%1 (%2) Asynchronous overlapped read page error %3 occurred. Please restore the databases from a previous backup.\r\n	System	18	EDB500	Error
The device sent an incorrect response(s) following a mouse reset.\r\n	System	18	i8042prt	Warning
An Access-Request was received from client %1 with a signature attribute that is not valid.\r\n	Application	18	IAS	Error
The device sent an incorrect response(s) following a mouse reset.\r\n	System	18	inport	Warning
The driver beneath this one has failed in some way for %1.\r\n	System	18	Various	Error
There are no more files.\r\n	System	18	Kernel	Error
The action was cancelled by the system, presumably to log off or shut down.\r\n	System	18	SmartCard	Error
A seeding adapter had no network range specified for adapter "%2".\r\nAppletalk could not be started on the adapter.\r\n	System	18	AppleTalk	Error
dmio: %2 %3 block %4: Uncorrectable %5 error\r\n	System	18	disk	Warning
The device sent an incorrect response(s) following a mouse reset.\r\n	System	18	busmouse	Warning
Certificate Services did not start: The signature algorithm is unrecognized in the registry value HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\CertSvc\\Configuration\\%1\\SignatureAlgorithm.  %2.\r\n	Application	18	Certificate Server	Error
%1 (%2) Synchronous overlapped write page issue error %3 occurred.\r\n	System	19	EDB500	Error
Unable to access device name %2.  Check current configuration.\r\n	System	19	Digiboard	Error
Could not set the keyboard typematic rate and delay.\r\n	System	19	i8042prt	Error
An Access-Request from client %1 contained an Extensible Authentication Protocol (EAP) message but no signature.\r\n	Application	19	IAS	Error
The device, %1, has been reset.\r\n	System	19	Various	Error
The media is write protected.\r\n	System	19	Kernel	Error
An internal communications error has been detected.\r\n	System	19	SmartCard	Error
A seeding adapter had no zone list specified on adapter "%2".\r\nAppletalk could not be started on the adapter.\r\n	System	19	AppleTalk	Error
dmio: %2 %3 block %4:\r\n        Uncorrectable %5 error on %6 %7 block %8\r\n	System	19	disk	Warning
Certificate Services did not start: The Subject Name Template string in the registry value HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\CertSvc\\Configuration\\%1\\SubjectTemplate is invalid.  An example of a valid string is:\r\nCommonName\r\n	Application	19	Certificate Server	Error
%1 (%2) Synchronous overlapped write page error %3 occurred.\r\n	System	20	EDB500	Error
Could not set the keyboard indicator lights.\r\n	System	20	i8042prt	Error
An attribute in the response exceeds the maximum RADIUS attribute length. The data is the attribute ID.\r\n	Application	20	IAS	Error
A transport driver received a frame which violated the protocol.\r\n	System	20	Various	Error
The system cannot find the device specified.\r\n	System	20	Kernel	Error
Unable to connect to DB server with connect string: %1.  Validate login and verify database is running with TCP/IP support.\r\n	System	20	U2DS static store	Error
Printer Driver %1 for %2 %3 was added or updated. Files:- %4.\r\n	System	20	Print	Warning
An internal error has been detected, but the source is unknown.\r\n	System	20	SmartCard	Error
Not used\r\nA seeding adapter had too many zones specified on adapter "%2". The limit on zones is 255.\r\n	System	20	AppleTalk	Error
The memory range for adapter %2 could not be translated to something the memory management system could understand.\r\n	System	20	Digiboard	Error
dmio: Cannot open disk %2: kernel error %3\r\n	System	20	disk	Information
Certificate Services did not start: The Certificate Date Validity Period string in the registry value HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\CertSvc\\Configuration\\%1\\ValidityPeriod is invalid.  Valid strings are "Seconds", "Minutes",	Application	20	Certificate Server	Error
%1 (%2) Synchronous overlapped patch file write page error %3 occurred.\r\n	System	21	EDB500	Error
Could not tell the hardware to send keyboard scan codes in the set expected by the driver.\r\n	System	21	i8042prt	Error
The response exceeds the maximum RADIUS packet length.\r\n	Application	21	IAS	Error
A conflict has been detected between two drivers which claimed two overlapping\r\nmemory regions.\r\nDriver %2, with device <%3>, claimed a memory range with starting address\r\nin data address 0x28 and 0x2c, and length in data address 0x30.\r\n	System	21	Various	Error
The device is not ready.\r\n	System	21	Kernel	Error
LDAP Administrative Max Connections to database exceeded 100 times for %1\r\n	System	21	U2DS static store	Warning
An ATR obtained from the registry is not a valid ATR string.\r\n	System	21	SmartCard	Error
Not used\r\nEither the default zone was null or the zone list was empty on a LocalTalk\r\nadapter &quot;%2&quot;.\r\n	System	21	AppleTalk	Error
Port %2(%3) was unable to initialize properly.\r\n	System	21	Digiboard	Error
dmio: Disk %2: Unexpected status on close: %3\r\n	System	21	disk	Information
Certificate Services could not process request %1 due to an error: %2.  The request was for %3.\r\n	Application	21	Certificate Server	Error
%1 (%2) Asynchronous read page time error %3 occurred. Please restore the databases from a previous backup.\r\n	System	22	EDB500	Error
Could not set the mouse sample rate.\r\n	System	22	i8042prt	Error
The Internet Authentication Service (IAS) could not send a response due to a network error. The data is the error code generated by Winsock.\r\n	Application	22	IAS	Error
Could not set the mouse sample rate.\r\n	System	22	inport	Error
A conflict has been detected between two drivers which claimed two overlapping\r\nIo port regions.\r\nDriver %2, with device <%3>, claimed an IO port range with starting address\r\nin data address 0x28 and 0x2c, and length in data address 0x30.\r\n	System	22	Various	Error
The device does not recognize the command.\r\n	System	22	Kernel	Error
An attempt was made to end a non-existent transaction.\r\n	System	22	SmartCard	Error
Not used\r\nThere was more than one zone specified in the zone list for a LocalTalk adapter &quot;%2&quot;.\r\n	System	22	AppleTalk	Error
IoCreateDevice failed on port %2.\r\n	System	22	Digiboard	Error
dmio: read error on object %2 of mirror %3 in volume %4 (start %5, length %6) corrected\r\n	System	22	disk	Information
Could not set the mouse sample rate.\r\n	System	22	busmouse	Error
Certificate Services could not process request %1 due to an error: %2.  The request was for %3.  Additional information: %4\r\n	Application	22	Certificate Server	Error
%1 (%2) Direct read found corrupted page error %3. Please restore the databases from a previous backup.\r\n	System	23	EDB500	Error
Could not set the mouse resolution.\r\n	System	23	i8042prt	Error
Could not set the mouse resolution.\r\n	System	23	inport	Error
A conflict has been detected between two drivers which claimed equivalent DMA\r\nchannels.\r\nDriver %2, with device <%3>, claimed the DMA Channel in data address 0x28, with\r\noptinal port in data address 0x2c.\r\n	System	23	Various	Error
Data error (cyclic redundancy check).\r\n	System	23	Kernel	Error
The specified reader is not currently available for use.\r\n	System	23	SmartCard	Error
Not used\r\nUnable to open the AppleTalk key in the registry.\r\n	System	23	AppleTalk	Error
The memory window for adapter %2 failed to open.\r\n	System	23	Digiboard	Error
dmio: Reassigning bad block number %2 on disk %3\r\n	System	23	disk	Information
Could not set the mouse resolution.\r\n	System	23	busmouse	Error
Certificate Services could not process request %1 due to an error: %2.  The request was for %3.  The certificate would contain an encoded length that is potentially incompatible with older enrollment software.  Submit a new request using different length	Application	23	Certificate Server	Error
%1 (%2) Buffer I/O thread termination error %3 occurred.\r\n	System	24	EDB500	Error
Could not enable transmissions from the mouse.\r\n	System	24	i8042prt	Error
Could not enable transmissions from the mouse.\r\n	System	24	inport	Error
A conflict has been detected between two drivers which claimed equivalent IRQs.\r\nDriver %2, with device <%3>, claimed an interrupt with Level in data address\r\n0x28, vector in data address 0x2c and Affinity in data address 0x30.\r\n	System	24	Various	Error
The program issued a command but the command length is incorrect.\r\n	System	24	Kernel	Error
The operation has been aborted to allow the server application to exit.\r\n	System	24	SmartCard	Error
Not used\r\nStarted with no bindings. The protocol must be bound to at least one adapter.\r\n	System	24	AppleTalk	Error
The Miniport driver %2 version is incorrect.  Please make certain that all Digi Intelligent Async products have been updated to the same driver version.\r\n	System	24	Digiboard	Error
dmio: Reassign bad block(s) on disk %2 succeeded\r\n	System	24	disk	Information
Could not enable transmissions from the mouse.\r\n	System	24	busmouse	Error
Certificate Services did not start: Unable to get certificate server CSP information from registry for %1.  %2.\r\n	Application	24	Certificate Server	Error
%1 (%2) Unable to write to the log. Error %3.\r\n	System	25	EDB500	Error
Unable to create the symbolic link for %1.\r\n	System	25	i8042prt	Warning
Unable to create the symbolic link for %1.\r\n	System	25	inport	Warning
The driver has detected a device with old or out-of-date firmware.  The\r\ndevice will not be used.\r\n	System	25	Various	Error
The drive cannot locate a specific area or track on the disk.\r\n	System	25	Kernel	Error
The PCI Receive buffer was too small.\r\n	System	25	SmartCard	Error
Certificate Services revoked the certificate for request %1 for %2.\r\n	Application	25	Certificate Server	Information
Not used\r\nUnable to start the router on adapter &quot;%2&quot; because a node could not be acquired.\r\n	System	25	AppleTalk	Error
dmio: Fail to reassign bad block(s) on disk %2: error 0x%3\r\n	System	25	disk	Warning
Unable to create the symbolic link for %1.\r\n	System	25	busmouse	Warning
%1 (%2) Unable to write to the log header. Error %3.\r\n	System	26	EDB500	Error
Exceeded the allowable number of retries (configurable via the registry) on device %1.\r\n	System	26	i8042prt	Error
The Inport bus mouse does not exist or was not detected.\r\n	System	26	inport	Warning
The driver has detected that device %1 has old or out-of-date firmware.\r\nReduced performance may result.\r\n	System	26	Various	Warning
The specified disk or diskette cannot be accessed.\r\n	System	26	Kernel	Error
The reader driver does not meet minimal requirements for support.\r\n	System	26	SmartCard	Error
Certificate Services for %1 was started.\r\n	Application	26	Certificate Server	Information
Not used\r\nUnable to start ZIP/RTMP processes on adapter "%2".\r\n	System	26	AppleTalk	Error
dmio: Found a bad block on disk %2 at block number %3\r\n	System	26	disk	Information
The bus mouse does not exist or was not detected.\r\n	System	26	busmouse	Warning
%1 (%2) Unable to read the log. Error %3.\r\n	System	27	EDB500	Error
The operation on %1 timed out (time out is configurable via the registry).\r\n	System	27	i8042prt	Error
The device could not allocate one or more required resources due to conflicts\r\nwith other devices. The device DMA setting of '%2' could not be\r\nsatisified due to a conflict with Driver '%3'.\r\n	System	27	Various	Error
The drive cannot find the sector requested.\r\n	System	27	Kernel	Error
The reader driver did not produce a unique reader name.\r\n	System	27	SmartCard	Error
Not used\r\nUnable to release a node acquired on adapter "%2".\r\n	System	27	AppleTalk	Error
dmio: Corrected a read error during RAID5 initialization on %2\r\n	System	27	disk	Information
Not enough memory was available to allocate internal storage needed for the device %1.\r\n	System	27	busmouse	Error
Certificate Services did not start: Hierarchical setup is incomplete.  Use the request file in %1.req to obtain a certificate for this Certificate Server, place it in %1.crt, and run the Certificate Server Hierarchy Configuration tool to complete the inst	Application	27	Certificate Server	Error
%1 (%2) Log version stamp does not match database engine version stamp.\r\n	System	28	EDB500	Error
Could not successfully write the Controller Command Byte for the i8042.\r\n	System	28	i8042prt	Information
The device could not allocate one or more required resources due to conflicts\r\nwith other devices. The device interrupt setting of '%2' could not be\r\nsatisified due to a conflict with Driver '%3'.\r\n	System	28	Various	Error
The printer is out of paper.\r\n	System	28	Kernel	Error
Certificate Services did not start: The Certificate Revocation List Period string is invalid in the registry value HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\CertSvc\\Configuration\\%1\\CRLPeriod.  Valid strings are "Seconds", "Minutes", "Ho	Application	28	Certificate Server	Error
The smart card does not meet minimal requirements for support.\r\n	System	28	SmartCard	Error
An invalid AARP packet was received on adapter &quot;%2&quot;.\r\n	System	28	AppleTalk	Error
dmio: Failed to recover a read error during RAID5 initialization on %2: error %3\r\n	System	28	disk	Warning
Not enough memory was available to allocate the ring buffer that holds incoming data for %1.\r\n	System	28	busmouse	Error
%1 (%2) Unable to read the log header. Error %3.\r\n	System	29	EDB500	Error
An unexpected ACKNOWLEDGE was received from the device.\r\n	System	29	i8042prt	Information
The device could not allocate one or more required resources due to conflicts\r\nwith other devices. The device memory setting of '%2' could not be\r\nsatisified due to a conflict with Driver '%3'.\r\n	System	29	Various	Error
The system cannot write to the specified device.\r\n	System	29	Kernel	Error
The Smart card resource manager is not running.\r\n	System	29	SmartCard	Error
Certificate Services issued a new Certificate Revocation List for %1.\r\n	Application	29	Certificate Server	Information
An AARP packet could not be sent on adapter &quot;%2&quot;.\r\n	System	29	AppleTalk	Error
dmio: %2 read error at block %3: status 0x%4\r\n	System	29	disk	Information
The hardware locations for %1 could not be translated to something the memory management system understands.\r\n	System	29	busmouse	Error
%1 (%2) Unable to create the log. The drive may be read-only or out of disk space. Error %3.\r\n	System	30	EDB500	Error
An unexpected RESEND was received from the device.\r\n	System	30	i8042prt	Warning
The device could not allocate one or more required resources due to conflicts\r\nwith other devices. The device port setting of '%2' could not be\r\nsatisified due to a conflict with Driver '%3'.\r\n	System	30	Various	Error
The system cannot read from the specified device.\r\n	System	30	Kernel	Error
SQL Error: %1\r\n	System	30	U2DS static store	Warning
Certificate Services did not start: Not enough memory or other system resources.\r\n	Application	30	Certificate Server	Error
The Smart card resource manager has shut down.\r\n	System	30	SmartCard	Error
The Zone Information Socket could not be opened on a new node being\r\nacquired, and the acquired node is being released on adapter &quot;%2&quot;.\r\n	System	30	AppleTalk	Error
dmio: %2 write error at block %3: status 0x%4\r\n	System	30	disk	Information
The hardware resources for %1 are already in use by another device.\r\n	System	30	busmouse	Error
%1 (%2) Unable to write to section 0 while flushing the log. Error %3.\r\n	System	31	EDB500	Error
No mouse port ("PS/2 compatible") mouse device was detected on the i8042 auxiliary port (not a problem unless this type of mouse really is connected).\r\n	System	31	i8042prt	Information
The file %2 on device %1 contains a bad disk block.\r\n	System	31	Various	Error
A device attached to the system is not functioning.\r\n	System	31	Kernel	Error
Certificate Services did not start: The chain of Certification Authority certificates is not properly configured.\r\n	Application	31	Certificate Server	Error
An unexpected card error has occurred.\r\n	System	31	SmartCard	Error
Releasing a node acquired on the adapter &quot;%2&quot; because the connected network\r\nis not seeded by any router on the net\r\n	System	31	AppleTalk	Warning
dmio: %2 write error at block %3 due to disk removal\r\n	System	31	disk	Information
Could not connect the interrupt for %1.\r\n	System	31	busmouse	Error
%1 (%2) Unable to write to section 1 while flushing the log. Error %3.\r\n	System	32	EDB500	Error
The keyboard device does not exist or was not detected.\r\n	System	32	i8042prt	Warning
The driver detected that the device %1 has its write cache enabled. Data corruption\r\nmay occur.\r\n	System	32	Various	Warning
The process cannot access the file because it is being used by another process.\r\n	System	32	Kernel	Error
Certificate Services did not start: Could not schedule automatic Certificate Revocation List publication for %1.  %2.\r\n	Application	32	Certificate Server	Error
No Primary Provider can be found for the smart card.\r\n	System	32	SmartCard	Error
The node ID obtained during Appletalk initialization on adapter &quot;%2&quot; was assigned to another device.\r\nCurrent node ID was released and a new node ID was acquired from the seed router in the seeded range.\r\n	System	32	AppleTalk	Warning
dmio: %2 read error at block %3 due to disk removal\r\n	System	32	disk	Information
The ISR has detected an internal state error in the driver for %1.\r\n	System	32	busmouse	Error
%1 (%2) Unable to write to section 2 while flushing the log. Error %3.\r\n	System	33	EDB500	Error
The keyboard and mouse devices do not exist or were not detected.\r\n	System	33	i8042prt	Warning
Data was recovered using error correction code on device %1.\r\n	System	33	Various	Warning
The process cannot access the file because another process has locked a portion of the file.\r\n	System	33	Kernel	Error
Certificate Services did not start: Could not create the Certificate Server service thread for %1.  %2.\r\n	Application	33	Certificate Server	Error
The requested order of object creation is not supported.\r\n	System	33	SmartCard	Error
The Address Mapping Table for adapter &quot;%2&quot; was not updated because the incoming\r\npacket contained an invalid source address\r\n	System	33	AppleTalk	Error
dmio: %2 is disabled by PnP\r\n	System	33	disk	Information
%1 (%2) Unable to write to section 3 while flushing the log. Error %3.\r\n	System	34	EDB500	Error
An error occurred while trying to determine the number of mouse buttons.\r\n	System	34	i8042prt	Error
The driver disabled the write cache on device %1.\r\n	System	34	Various	Warning
The wrong diskette is in the drive.\r\nInsert %2 (Volume Serial Number: %3)\r\ninto drive %1.\r\n	System	34	Kernel	Error
Certificate Services did not start: Could not initialize RPC for %1.  %2.\r\n	Application	34	Certificate Server	Error
This smart card does not support the requested feature.\r\n	System	34	SmartCard	Error
Not used\r\nUnable to send a ZIP packet on adapter &quot;%2&quot;.\r\n	System	34	AppleTalk	Warning
dmio: %2 is re-online by PnP\r\n	System	34	disk	Information
%1 (%2) Error %3 occurred while opening a newly created log file.\r\n	System	35	EDB500	Error
An unexpected RESET was detected from the mouse device.\r\n	System	35	i8042prt	Information
Certificate Services did not start: Could not initialize OLE for %1.  %2.\r\n	Application	35	Certificate Server	Error
The identified directory does not exist in the smart card.\r\n	System	35	SmartCard	Error
Not used\r\nUnable to close a socket opened for a ZIP request on adapter "%2".\r\n	System	35	AppleTalk	Warning
dmio: Disk %2 block %3 (mountpoint %4): Uncorrectable read error\r\n	System	35	disk	Warning
%1 (%2) Unable to read page %4 of database %3. Error %5.\r\n	System	36	EDB500	Error
An unexpected RESET was detected from the mouse device.  The wheel has been deactivated.\r\n	System	36	i8042prt	Warning
A user hit their quota threshold on volume %2.\r\n	System	36	Various	Information
Too many files opened for sharing.\r\n	System	36	Kernel	Error
Certificate Services did not start: Could not convert the Unicode authority name to look up the Certification Authority certificate for %1.  %2.\r\n	Application	36	Certificate Server	Error
The identified file does not exist in the smart card.\r\n	System	36	SmartCard	Error
Unable to open RTMP/NBP/EP sockets on a node created on adapter &quot;%2&quot;.\r\nAppletalk could not be started on the adapter.\r\n	System	36	AppleTalk	Error
dmio: %2 %3 block %4 (mountpoint %5): Uncorrectable read error\r\n	System	36	disk	Warning
%1 (%2) Unable to read header of database %3. Error %4.\r\n	System	37	EDB500	Error
A bogus RESET was detected from the mouse device.\r\n	System	37	i8042prt	Warning
A user hit their quota limit on volume %2.\r\n	System	37	Various	Information
Certificate Services did not start: Could not decode the Certification Authority certificate for %1.  %2.\r\n	Application	37	Certificate Server	Error
The supplied path does not represent a smart card directory.\r\n	System	37	SmartCard	Error
Not used\r\nUnable to close sockets on a node on adapter "%2" and so the\r\nnode may not be released properly\r\n	System	37	AppleTalk	Error
dmio: Disk %2 block %3 (mountpoint %4): Uncorrectable write error\r\n	System	37	disk	Warning
%1 (%2) The database %3 created at %4 was not recovered. The recovered database was created at %5.\r\n	System	38	EDB500	Error
A wheel mouse was detected after a device reset. The wheel has been reactivated.\r\n	System	38	i8042prt	Warning
The system has started rebuilding the user disk quota information on\r\ndevice %1 with label "%2".\r\n	System	38	Various	Information
Reached the end of the file.\r\n	System	38	Kernel	Error
The supplied path does not represent a smart card file.\r\n	System	38	SmartCard	Error
Certificate Services for %1 was stopped.\r\n	Application	38	Certificate Server	Information
Unable to create the device &quot;%2&quot;.  \r\nAppleTalk protocol could not be started.\r\nThe error is in the data.\r\n	System	38	AppleTalk	Error
dmio: %2 %3 block %4 (mountpoint %5): Uncorrectable write error\r\n	System	38	disk	Warning
%1 (%2) The database %3 created at %4 was not recovered.\r\n	System	39	EDB500	Error
A protocol error has occured. Resetting the mouse to known state.\r\n	System	39	i8042prt	Warning
The system has successfully rebuilt the user disk quota information on\r\ndevice %1 with label "%2".\r\n	System	39	Various	Information
The disk is full.\r\n	System	39	Kernel	Error
Certificate Services did not start: The Certification Authority DCOM class for %1 could not be registered.  %2.  Use the services administration tool to change the Certification Authority logon context.\r\n	Application	39	Certificate Server	Error
Access is denied to this file.\r\n	System	39	SmartCard	Error
Unable to register with the NDIS wrapper.\r\nAppletalk could not be started on the adapter.\r\n	System	39	AppleTalk	Error
%1 (%2) The database engine found a bad page.\r\n	System	40	EDB500	Error
The system has encounted an error rebuilding the user disk quota\r\ninformation on device %1 with label "%2".\r\n	System	40	Various	Warning
Certificate Services did not start: Could not initialize DCOM class factories for %1.  %2.\r\n	Application	40	Certificate Server	Error
An attempt was made to write more data than would fit in the target object.\r\n	System	40	SmartCard	Error
Unable to deregister with the NDIS wrapper.\r\nAppletalk protocol may be in an unstable state on the adapter.\r\n	System	40	AppleTalk	Error
%1 (%2) The database engine lost one page of bad data.\r\n	System	41	EDB500	Error
The file system structure on the disk is corrupt and unusable.\r\nPlease run the chkdsk utility on the device %1 with label "%2".\r\n	System	41	Various	Error
Failed to backout group membership for Rdn: %1\r\n	System	41	U2DS static store	Error
Certificate Services did not start: Could not initialize DCOM Security Context for %1.  %2.\r\n	Application	41	Certificate Server	Error
There was an error trying to set the smart card file object pointer.\r\n	System	41	SmartCard	Error
Unable to open the adapter (bind to the mac) &quot;%2&quot;.\r\nAppletalk could not be started on the adapter.\r\n	System	41	AppleTalk	Error
%1 (%2) The database engine repaired one page link.\r\n	System	42	EDB500	Error
The user disk quota information is unusable.\r\nTo ensure accuracy, the file system quota information on the device %1 with label "%2" will\r\nbe rebuilt.\r\n	System	42	Various	Error
Succeeded backing out group membership for Rdn: %1\r\n	System	42	U2DS static store	Information
Certificate Services did not start: Could not build CA certificate chain for %1.  %2.\r\n	Application	42	Certificate Server	Error
The supplied PIN is incorrect.\r\n	System	42	SmartCard	Error
Unable to close the adapter &quot;%2&quot;.\r\nAppletalk protocol may be in an unstable state on the adapter.\r\n	System	42	AppleTalk	Warning
%1 (%2) The database engine lost one or more bad columns of data in one record.\r\n	System	43	EDB500	Error
The system sleep operation failed\r\n	System	43	Various	Error
The "%1" Policy Module "%2" method caused an exception at address %4.  The exception code is %3.\r\n	Application	43	Certificate Server	Error
An unrecognized error code was returned from a layered component.\r\n	System	43	SmartCard	Error
AppleTalk is not bound to the adapter &quot;%2&quot;. \r\nRequest for the adapter was ignored.\r\n	System	43	AppleTalk	Error
%1 (%2) The database engine lost one table called %3.\r\n	System	44	EDB500	Error
The system could not get file retrieval pointers for the dump file.\r\n	System	44	Various	Error
The "%1" Policy Module "%2" method returned an error.  The returned status code is %3.  %4\r\n	Application	44	Certificate Server	Error
The requested certificate does not exist.\r\n	System	44	SmartCard	Error
Unable to get the station address for adapter &quot;%2&quot;.\r\nThe error was ignored and processing was continued.\r\n	System	44	AppleTalk	Warning
%1 (%2) The database disk is full.\r\n	System	45	EDB500	Error
The system could not sucessfully load the crash dump driver.\r\n	System	45	Various	Error
The requested certificate could not be obtained.\r\n	System	45	SmartCard	Error
Unable to set the lookahead size for adapter &quot;%2&quot;.\r\nAppletalk could not be started on the adapter.\r\n	System	45	AppleTalk	Warning
The "%1" Exit Module "%2" method caused an exception at address %4.  The exception code is %3.\r\n	Application	45	Certificate Server	Error
%1 (%2) The database signature does not match the log signature for database %3.\r\n	System	46	EDB500	Error
Crash dump initialization failed!\r\n	System	46	Various	Error
Cannot find a smart card reader.\r\n	System	46	SmartCard	Error
Unable to set the packet filter for adapter &quot;%2&quot;.\r\nAppletalk could not be started on the adapter.\r\n	System	46	AppleTalk	Warning
The "%1" Exit Module "%2" method returned an error.  The returned status code is %3.  %4\r\n	Application	46	Certificate Server	Error
%1 (%2) The database engine could not find the file or directory called %3.\r\n	System	47	EDB500	Error
A valid crash dump was found in the paging file while trying to configure\r\na direct dump. Direct dump is disabled! This occurs when the direct dump\r\noption is set in the registry but a stop error occured before configuration\r\ncompleted\r\n	System	47	Various	Error
A communications error with the smart card has been detected.  Retry the operation.\r\n	System	47	SmartCard	Error
Certificate Services could not sucessfully complete integration setup with Internet Information Server. Web setup was not completed; CRLs and enrollment pages may not be available. %1.\r\n	Application	47	Certificate Server	Information
Unable to allocate resources from the NDIS wrapper.\r\nSystem may be low on resources.\r\n	System	47	AppleTalk	Error
%1 (%2) The database engine could not access the file called %3.\r\n	System	48	EDB500	Error
Direct dump configuration failed. Validate the filename and make sure the target device\r\nis not a Fault Tolerant set member, remote, or floppy device. The failure may\r\nbe because there is not enough room on the dump device to create the dump file.\r\n	System	48	Various	Error
Unable to allocate resources from the NDIS wrapper.\r\nAppletalk could not be started on the adapter.\r\nSystem may be low on resources.\r\n	System	48	AppleTalk	Error
Revocation status for a certificate in the CA certificate chain for %1 could not be verified because a server is currently unavailable.  %2.\r\n	Application	48	Certificate Server	Warning
%1 (%2) The database engine is rejecting update operations due to low free disk space on the log disk.\r\n	System	49	EDB500	Error
Configuring the Page file for crash dump failed. Make sure there is a page\r\nfile on the boot partition and that is large enough to contain all physical\r\nmemory.\r\n	System	49	Various	Error
Not used\r\nAn AARP packet was not completely available in the lookahead data from NDIS\r\non adapter &quot;%2&quot;.\r\n	System	49	AppleTalk	Warning
A certificate in the CA certificate chain for %1 could not be verified because no information is available describing how to check the revocation status.  %2.\r\n	Application	49	Certificate Server	Warning
%1 (%2) The database engine log disk is full. Free up some disk space and restart database engine.\r\n	System	50	EDB500	Error
The file system structure on the disk is corrupt and unusable.\r\nPlease run the chkdsk utility on the volume %2.\r\n	System	50	Various	Error
The network request is not supported.\r\n	System	50	Kernel	Error
Packet received on adapter &quot;%2&quot; contained errors and is not being accepted.\r\n	System	50	AppleTalk	Warning
Certificate Services did not start: Unable to acquire a cryptographic context for %1.  %2.\r\n	Application	50	Certificate Server	Error
%1 (%2) Database %3 and its patch file do not match.\r\n	System	51	EDB500	Error
The remote computer is not available.\r\n	System	51	Kernel	Error
Unable to allocate resources.\r\n	System	51	AppleTalk	Error
Certificate Services did not start: A certificate in the CA certificate chain for %1 has been revoked.  %2.\r\n	Application	51	Certificate Server	Error
%1 (%2) The starting log 0x%3 is too high. It should start from 0x%4.\r\n	System	52	EDB500	Error
A duplicate name exists on the network.\r\n	System	52	Kernel	Error
Certificate Services issued a certificate for request %1 for %2.  Additional information: %3\r\n	Application	52	Certificate Server	Information
Appletalk protocol stack was unable to allocate memory. \r\nSystem may be low on memory.\r\n	System	52	AppleTalk	Error
%1 (%2) The ending log 0x%3 is too low. It should end with 0x%4.\r\n	System	53	EDB500	Error
The network path was not found.\r\n	System	53	Kernel	Error
Not used\r\nA fatal internal error was detected in the AppleTalk stack.\r\n	System	53	AppleTalk	Error
Certificate Services denied request %1 because %2.  The request was for %3.  Additional information: %4\r\n	Application	53	Certificate Server	Warning
%1 (%2) The restore log file 0x%3 is damaged.\r\n	System	54	EDB500	Error
The network is busy.\r\n	System	54	Kernel	Error
Certificate Services left request %1 pending in the queue for %2.  Additional information: %3\r\n	Application	54	Certificate Server	Information
Unable to start packet reception on the adapter &quot;%2&quot;.\r\nAppletalk could not be started on the adapter.\r\n	System	54	AppleTalk	Warning
The Windows Time Service was not able to find a Domain Controller. A time and date update was not possible.\r\n	System	54	w32time	Warning
%1 (%2) The time stamp for restore log file 0x%3 does not match previous log.\r\n	System	55	EDB500	Error
The specified network resource or device is no longer available.\r\n	System	55	Kernel	Error
Not used\r\nPacket received contained errors and is not being accepted.\r\n	System	55	AppleTalk	Warning
Certificate Services unrevoked the certificate for request %1 for %2.\r\n	Application	55	Certificate Server	Information
%1 (%2) The restore log file 0x%3 is missing.\r\n	System	56	EDB500	Error
The network BIOS command limit has been reached.\r\n	System	56	Kernel	Error
Network Number conflicts with an existing router.\r\nThe error was ignored and processing was continued.\r\n	System	56	AppleTalk	Warning
Certificate Services denied request %1.  The request was for %2.\r\n	Application	56	Certificate Server	Information
%1 (%2) The existing log file 0x%3 is damaged. Log files 0x%4 to 0x%5 have been deleted.\r\n	System	57	EDB500	Error
A network adapter hardware error occurred.\r\n	System	57	Kernel	Error
Not used\r\nA uniprocessor driver was loaded a multiprocessor system. The driver could not load.\r\n	System	57	AppleTalk	Error
Certificate Services denied request %1.  The request was for %2.  Additional information: %3\r\n	Application	57	Certificate Server	Information
The specified server cannot perform the requested operation.\r\n	System	58	Kernel	Error
%1 (%2) The existing log file 0x%3 is not in a valid sequence. Log files 0x%4 to 0x%5 have been deleted.\r\n	System	58	EDB500	Error
Certificate Services did not start: A certificate in the CA certificate chain for %1 has expired.  %2.\r\n	Application	58	Certificate Server	Error
An unexpected network error occurred.\r\n	System	59	Kernel	Error
%1 (%2) Database %3 needs a full backup before incremental backup.\r\n	System	59	EDB500	Error
The remote adapter is not compatible.\r\n	System	60	Kernel	Error
%1 (%2) The backup database %3 must be a multiple of 4 KB.\r\n	System	60	EDB500	Error
Unable to Add Partition: %1\r\n	System	60	U2DS static store	Error
The printer queue is full.\r\n	System	61	Kernel	Error
%1 (%2) Unable to write a shadowed header for file %3.\r\n	System	61	EDB500	Error
Maximum number of partitions exceeded.\r\n	System	61	U2DS static store	Error
Space to store the file waiting to be printed is not available on the server.\r\n	System	62	Kernel	Error
%1 (%2) The log file %3 is corrupt.\r\n	System	62	EDB500	Error
Only one writeable database is allowed on a given value partition.  Remove write capability from %1.\r\n	System	62	U2DS static store	Error
Your file waiting to be printed was deleted.\r\n	System	63	Kernel	Error
%1 (%2) Background clean up skipped pages. Database may benefit from defragmentation.\r\n	System	63	EDB500	Error
You have exceeded the maximum of %1 subscribers for a given value partition.\r\n	System	63	U2DS static store	Error
%1 (%2) File system error %4 during IO on database %3. Please restore the databases from a previous backup.\r\n	System	64	EDB500	Error
The specified network name is no longer available.\r\n	System	64	Kernel	Error
%1 (%2) IO size mismatch on database %3. IO size %4 expected while returned size is %5.\r\n	System	65	EDB500	Error
Network access is denied.\r\n	System	65	Kernel	Error
%1 (%2) File system error %4 during IO on log file %3.\r\n	System	66	EDB500	Error
The network resource type is not correct.\r\n	System	66	Kernel	Error
%1 (%2) IO size mismatch on log file %3. IO size %4 expected while returned size is %5.\r\n	System	67	EDB500	Error
The network name cannot be found.\r\n	System	67	Kernel	Error
%1 (%2) Must install language support for language id 0x%3.\r\n	System	68	EDB500	Error
The name limit for the local computer network adapter card was exceeded.\r\n	System	68	Kernel	Error
%1 (%2) Redoing log file %3.\r\n	System	69	EDB500	Error
The network BIOS session limit was exceeded.\r\n	System	69	Kernel	Error
The remote server has been paused or is in the process of being started.\r\n	System	70	Kernel	Error
Failed to modify subref object.  If namespace partition root objects appear inconsistent, run modify operation again.\r\n	System	70	U2DS static store	Warning
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.\r\n	System	71	Kernel	Error
The specified printer or disk device has been paused.\r\n	System	72	Kernel	Error
The file exists.\r\n	System	80	Kernel	Error
The Code Page for the Database could not be determined.  %1\r\n	System	80	U2DS static store	Error
The database code page is not valid for this NT installation CodePage=%1\r\n	System	81	U2DS static store	Error
The directory or file cannot be created.\r\n	System	82	Kernel	Error
Fail on INT 24.\r\n	System	83	Kernel	Error
Storage to process this request is not available.\r\n	System	84	Kernel	Error
The local device name is already in use.\r\n	System	85	Kernel	Error
The specified network password is not correct.\r\n	System	86	Kernel	Error
The parameter is incorrect.\r\n	System	87	Kernel	Error
A write fault occurred on the network.\r\n	System	88	Kernel	Error
The system cannot start another process at this time.\r\n	System	89	Kernel	Error
%1 (%2) The database engine %3.%4.%5.%6 started.\r\n	Application	100	ESENT	Information
Cannot create another system semaphore.\r\n	System	100	Kernel	Error
Partitioning wizard unable to load setupstr.dll.  Please verify that setupstr.dll is present and registered.\r\n	System	100	U2DS static store	Error
The exclusive semaphore is owned by another process.\r\n	System	101	Kernel	Error
The reader cannot communicate with the smart card, due to ATR configuration conflicts.\r\n	System	101	SmartCard	Warning
The assignment of application %1 from policy %2 failed.  The error was %%%3.\r\n	Application	101	Application Management	Error
Partitioning wizard unable to setup tables, stored procedures, indices, and data on target db (%1).  Verify target db is valid, stable, and empty.\r\n	System	101	U2DS static store	Error
IISADMIN service recreated an account %1.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	Application	101	IIS	Warning
The semaphore is set and cannot be closed.\r\n	System	102	Kernel	Error
The smart card is not responding to a reset.\r\n	System	102	SmartCard	Warning
The install of application %1 from policy %2 failed.  The error was %%%3.\r\n	Application	102	Application Management	Error
Partitioning wizard unable to load dscomobj.dll.  Please verify that %1 exists or refresh your install.\r\n	System	102	U2DS static store	Error
IISADMIN service found that account %1 is disabled. Some IIS functions can fail because of that reason.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentred	Application	102	IIS	Error
The semaphore cannot be set again.\r\n	System	103	Kernel	Error
Power has been removed from the smart card, so that further communication is not possible.\r\n	System	103	SmartCard	Warning
The removal of the assignment of application %1 from policy %2 failed.  The error was %%%3.\r\n	Application	103	Application Management	Error
Partitioning wizard: %1 appears to be invalid or out of date.  Please refresh your install.\r\n	System	103	U2DS static store	Error
IISADMIN service was unable to update the activation identity for all IIS COM+ applications. Some IIS applications may fail to function. %nFor additional information specific to this message please visit the Microsoft Online Support site located at: http	Application	103	IIS	Error
Cannot request exclusive semaphores at interrupt time.\r\n	System	104	Kernel	Error
The smart card has been reset, so any shared state information is invalid.\r\n	System	104	SmartCard	Warning
The removal of application %1 from policy %2 failed.  The error was %%%3.\r\n	Application	104	Application Management	Error
Partitioning wizard has lost database integrity.  Partition may be invalid.\r\n	System	104	U2DS static store	Error
The previous ownership of this semaphore has ended.\r\n	System	105	Kernel	Error
Partitioning setup failed to delete some objects from the source partition.  This should not affect functionality.\r\n	System	105	U2DS static store	Warning
The smart card has been removed, so that further communication is not possible.\r\n	System	105	SmartCard	Warning
The reinstall of application %1 from policy %2 failed.  The error was %%%3.\r\n	Application	105	Application Management	Error
Insert the diskette for drive %1.\r\n	System	106	Kernel	Error
Attempted to partition a non-existent container %1.  Please create the container before trying to partition it.\r\n	System	106	U2DS static store	Warning
Access was denied because of a security violation.\r\n	System	106	SmartCard	Warning
Application %1 from policy %2 was configured to upgrade application %3 from policy %4.  The removal\r\nof application %3 from policy %4 failed with error %%%5.  The upgrade will be aborted.\r\n	Application	106	Application Management	Error
The program stopped because an alternate diskette was not inserted.\r\n	System	107	Kernel	Error
Attempted to partition a non-empty container %1.  Please target an empty container.\r\n	System	107	U2DS static store	Warning
The card cannot be accessed because the wrong PIN was presented.\r\n	System	107	SmartCard	Warning
The execution of the setup program for application %1 from policy %2 failed.  The setup\r\npath was %3 and the error was %%%4.\r\n	Application	107	Application Management	Error
The disk is in use or locked by\r\nanother process.\r\n	System	108	Kernel	Error
Attempted to partition a partitioned container %1.  Please target an non-partitioned container.\r\n	System	108	U2DS static store	Warning
The card cannot be accessed because the maximum number of PIN entry attempts has been reached.\r\n	System	108	SmartCard	Warning
Failed to apply changes to software installation settings.  %1  The error was %%%2.\r\n	Application	108	Application Management	Error
The pipe has been ended.\r\n	System	109	Kernel	Error
The end of the smart card file has been reached.\r\n	System	109	SmartCard	Warning
The system cannot open the\r\ndevice or file specified.\r\n	System	110	Kernel	Error
The action was cancelled by the user.\r\n	System	110	SmartCard	Warning
Partitioning setup failed and the DSOGRID table could not be restored to its previous state.  System unstable, consult documentation.\r\n	System	110	U2DS static store	Error
The file name is too long.\r\n	System	111	Kernel	Error
The DNS server could not create a thread.  System may be out of resources.\r\nYou might close applications not in use, restart the DNS server or\r\nreboot your computer.  For the specific error code, see the Record Data page.\r\n	DNS Server	111	DNS	Error
Partitioning setup failed and the SUBREFS table could not be restored to its previous state.  System unstable, consult documentation.\r\n	System	111	U2DS static store	Error
There is not enough space on the disk.\r\n	System	112	Kernel	Error
The DNS server could not initialize a recursion thread.  The system may be\r\nout of resources.  You might close applications not in use, restart\r\nthe DNS server or reboot your computer.  For the specific error code, see\r\nthe Record Data page.\r\n	DNS Server	112	DNS	Error
No more internal file identifiers available.\r\n	System	113	Kernel	Error
The target internal file identifier is incorrect.\r\n	System	114	Kernel	Error
The IOCTL call made by the application program is not correct.\r\n	System	117	Kernel	Error
The verify-on-write switch parameter value is not correct.\r\n	System	118	Kernel	Error
The system does not support the command requested.\r\n	System	119	Kernel	Error
This function is only valid in Windows NT mode.\r\n	System	120	Kernel	Error
Deleted a partitioned container but was unable to remove partition info from the DSOGRID table.  System unstable, consult documentation.\r\n	System	120	U2DS static store	Error
The semaphore timeout period has expired.\r\n	System	121	Kernel	Error
Deleted a partitioned container but was unable to remove partition info from the DSOGRID table.  System unstable, consult documentation.\r\n	System	121	U2DS static store	Error
The data area passed to a system call is too small.\r\n	System	122	Kernel	Error
Add Db Server admin call made with an invalid value partition id for container %1.  Most likely cause is attempt to configure more value partition db's than were specified in initial partitioning configuration.\r\n	System	122	U2DS static store	Error
The filename, directory name, or volume label syntax is incorrect.\r\n	System	123	Kernel	Error
Query failed attempting to determine the value partition count for container %1.  Verify parameters being passed to the AddDbServer interface and target database state, and check event log for SQL errors."\r\n	System	123	U2DS static store	Error
The system call level is not correct.\r\n	System	124	Kernel	Error
Could not find value partition count for container %1.  Verify parameters being passed to the AddDbServer interface and admin interface call sequence."\r\n	System	124	U2DS static store	Error
The disk has no volume label.\r\n	System	125	Kernel	Error
The specified module could not be found.\r\n	System	126	Kernel	Error
The specified procedure could not be found.\r\n	System	127	Kernel	Error
There are no child processes to wait for.\r\n	System	128	Kernel	Error
The %1 application cannot be run in Win32 mode.\r\n	System	129	Kernel	Error
The DNS server could not initialize WINS lookup.  The system may be out\r\nof resources.  You might close applications not in use, restart the\r\nDNS server or reboot your computer.  For the specific error code, see the\r\nRecord Data page.\r\n	DNS Server	130	DNS	Error
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.\r\n	System	130	Kernel	Error
Consecutive DB connect failures exceed threshold with connect string %1.  Putting DB in recovery mode.\r\n	System	130	U2DS static store	Warning
The DNS server failed to initialize WINSR reverse lookup, through NetBIOS\r\nadapter status lookup.  The server will continue to run but will not\r\nattempt to perform WINS reverse lookups.  This may be due to an incorrect\r\nconfiguration.\r\nIf WINSR lo	DNS Server	131	DNS	Error
An attempt was made to move the file pointer before the beginning of the file.\r\n	System	131	Kernel	Error
DB recovery timeout overridden on connect string %1.  Verify system integrity.\r\n	System	131	U2DS static store	Warning
The file pointer cannot be set on the specified device or file.\r\n	System	132	Kernel	Error
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.\r\n	System	133	Kernel	Error
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.\r\n	System	134	Kernel	Error
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.\r\n	System	135	Kernel	Error
The system tried to delete the JOIN of a drive that is not joined.\r\n	System	136	Kernel	Error
The system tried to delete the substitution of a drive that is not substituted.\r\n	System	137	Kernel	Error
The system tried to join a drive to a directory on a joined drive.\r\n	System	138	Kernel	Error
The system tried to substitute a drive to a directory on a substituted drive.\r\n	System	139	Kernel	Error
The DNS server could not initialize the remote procedure call (RPC) service.\r\nIf it is not running, start the RPC service or reboot the computer.  For\r\nspecific error code, see the Record Data page.\r\n	DNS Server	140	DNS	Error
The system tried to join a drive to a directory on a substituted drive.\r\n	System	140	Kernel	Error
The system tried to SUBST a drive to a directory on a joined drive.\r\n	System	141	Kernel	Error
The system cannot perform a JOIN or SUBST at this time.\r\n	System	142	Kernel	Error
The system cannot join or substitute a drive to or for a directory on the same drive.\r\n	System	143	Kernel	Error
The directory is not a subdirectory of the root directory.\r\n	System	144	Kernel	Error
The directory is not empty.\r\n	System	145	Kernel	Error
The path specified is being used in a substitute.\r\n	System	146	Kernel	Error
Not enough resources are available to process this command.\r\n	System	147	Kernel	Error
The path specified cannot be used at this time.\r\n	System	148	Kernel	Error
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.\r\n	System	149	Kernel	Error
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.\r\n	System	150	Kernel	Error
Missing timestamp stored procedure indicates that the master database for this server may not have been updated with the mcis2upd.sql script.  Please run this script from your Site Server 3.0 Update for MCIS 2.0 installation site.\r\n	System	150	U2DS static store	Warning
A network error occurred accessing software installation data in the active directory.  The error was %%%1.\r\n	Application	150	Application Management	Error
The number of specified semaphore events for DosMuxSemWait is not correct.\r\n	System	151	Kernel	Error
Out of sync stored procedure indicates that a database for this server may not have been updated with the current mcis2upd.sql script.  Please run this script from your Site Server 3.0 Update for MCIS 2.0 installation site.\r\n	System	151	U2DS static store	Error
DosMuxSemWait did not execute; too many semaphores are already set.\r\n	System	152	Kernel	Error
The DosMuxSemWait list is not correct.\r\n	System	153	Kernel	Error
The volume label you entered exceeds the label character\r\nlimit of the target file system.\r\n	System	154	Kernel	Error
Cannot create another thread.\r\n	System	155	Kernel	Error
The recipient process has refused the signal.\r\n	System	156	Kernel	Error
The segment is already discarded and cannot be locked.\r\n	System	157	Kernel	Error
The segment is already unlocked.\r\n	System	158	Kernel	Error
The address for the thread ID is not correct.\r\n	System	159	Kernel	Error
The argument string passed to DosExecPgm is not correct.\r\n	System	160	Kernel	Error
The specified path is invalid.\r\n	System	161	Kernel	Error
A signal is already pending.\r\n	System	162	Kernel	Error
No more threads can be created in the system.\r\n	System	164	Kernel	Error
Unable to lock a region of a file.\r\n	System	167	Kernel	Error
The requested resource is in use.\r\n	System	170	Kernel	Error
A lock request was not outstanding for the supplied cancel region.\r\n	System	173	Kernel	Error
The file system does not support atomic changes to the lock type.\r\n	System	174	Kernel	Error
The system detected a segment number that was not correct.\r\n	System	180	Kernel	Error
The operating system cannot run %1.\r\n	System	182	Kernel	Error
Cannot create a file when that file already exists.\r\n	System	183	Kernel	Error
The flag passed is not correct.\r\n	System	186	Kernel	Error
The specified system semaphore name was not found.\r\n	System	187	Kernel	Error
The operating system cannot run %1.\r\n	System	188	Kernel	Error
The operating system cannot run %1.\r\n	System	189	Kernel	Error
The operating system cannot run %1.\r\n	System	190	Kernel	Error
Cannot run %1 in Win32 mode.\r\n	System	191	Kernel	Error
The operating system cannot run %1.\r\n	System	192	Kernel	Error
%1 is not a valid Win32 application.\r\n	System	193	Kernel	Error
The operating system cannot run %1.\r\n	System	194	Kernel	Error
The operating system cannot run %1.\r\n	System	195	Kernel	Error
The operating system cannot run this application program.\r\n	System	196	Kernel	Error
The operating system is not presently configured to run this application.\r\n	System	197	Kernel	Error
The operating system cannot run %1.\r\n	System	198	Kernel	Error
The operating system cannot run this application program.\r\n	System	199	Kernel	Error
The code segment cannot be greater than or equal to 64K.\r\n	System	200	Kernel	Error
The operating system cannot run %1.\r\n	System	201	Kernel	Error
Application %1 from policy %2 is an upgrade of application %3 from policy %4 and\r\nwill force application %3 to be removed.\r\n	Application	201	Application Management	Warning
The operating system cannot run %1.\r\n	System	202	Kernel	Error
Application %1 from policy %2 is an upgrade of application %3 from policy %4 and\r\nwill cause the assignment of application %3 to be removed.\r\n	Application	202	Application Management	Warning
The system could not find the environment\r\noption that was entered.\r\n	System	203	Kernel	Error
No process in the command subtree has a\r\nsignal handler.\r\n	System	205	Kernel	Error
The filename or extension is too long.\r\n	System	206	Kernel	Error
Listen failed: %1\r\n	System	206	NetDDE	Error
The ring 2 stack is in use.\r\n	System	207	Kernel	Error
The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.\r\n	System	208	Kernel	Error
The signal being posted is not correct.\r\n	System	209	Kernel	Error
The signal handler cannot be set.\r\n	System	210	Kernel	Error
The segment is locked and cannot be reallocated.\r\n	System	212	Kernel	Error
Replication of license information failed because the License Logging Service on server %1 could not be contacted.\r\n	Application	213	LicenseService	Warning
Too many dynamic-link modules are attached to this program or dynamic-link module.\r\n	System	214	Kernel	Error
Cannot nest calls to LoadModule.\r\n	System	215	Kernel	Error
The image file %1 is valid, but is for a machine type other than the current machine.\r\n	System	216	Kernel	Error
The pipe state is invalid.\r\n	System	230	Kernel	Error
All pipe instances are busy.\r\n	System	231	Kernel	Error
The pipe is being closed.\r\n	System	232	Kernel	Error
No process is on the other end of the pipe.\r\n	System	233	Kernel	Error
More data is available.\r\n	System	234	Kernel	Error
The session was canceled.\r\n	System	240	Kernel	Error
The specified extended attribute name was invalid.\r\n	System	254	Kernel	Error
The extended attributes are inconsistent.\r\n	System	255	Kernel	Error
The wait operation timed out.\r\n	System	258	Kernel	Error
No more data is available.\r\n	System	259	Kernel	Error
The end of the list has been reached.%0\r\n	System	259	Quartz	Success
The copy functions cannot be used.\r\n	System	266	Kernel	Error
The directory name is invalid.\r\n	System	267	Kernel	Error
The extended attributes did not fit in the buffer.\r\n	System	275	Kernel	Error
The extended attribute file on the mounted file system is corrupt.\r\n	System	276	Kernel	Error
The extended attribute table file is full.\r\n	System	277	Kernel	Error
The specified extended attribute handle is invalid.\r\n	System	278	Kernel	Error
The mounted file system does not support extended attributes.\r\n	System	282	Kernel	Error
Attempt to release mutex not owned by caller.\r\n	System	288	Kernel	Error
Too many posts were made to a semaphore.\r\n	System	298	Kernel	Error
Only part of a ReadProcessMemory or WriteProcessMemory request was completed.\r\n	System	299	Kernel	Error
%1 (%2) The database engine is initiating recovery steps.\r\n	Application	300	ESENT	Information
The oplock request is denied.\r\n	System	300	Kernel	Error
%1 (%2) The database engine is replaying log file %3.\r\n	Application	301	ESENT	Information
An invalid oplock acknowledgment was received by the system.\r\n	System	301	Kernel	Error
The assignment of application %1 from policy %2 succeeded.\r\n	Application	301	Application Management	Success
%1 (%2) The database engine has successfully completed recovery steps.\r\n	Application	302	ESENT	Information
The install of application %1 from policy %2 succeeded.\r\n	Application	302	Application Management	Success
The removal of the assignment of application %1 from policy %2 succeeded.\r\n	Application	303	Application Management	Success
The removal of application %1 from policy %2 succeeded.\r\n	Application	304	Application Management	Success
The reinstall of application %1 from policy %2 succeeded.\r\n	Application	305	Application Management	Success
Application %1 from policy %2 successfully upgraded application %3 from policy %4.\r\n	Application	306	Application Management	Success
The launch of the setup command for application %1 from policy %2 succeeded.\r\n	Application	307	Application Management	Success
Changes to software installation settings were applied successfully.\r\n	Application	308	Application Management	Success
The system cannot find message text for message number 0x%1 in the message file for %2.\r\n	System	317	Kernel	Error
The evaluation period for this product has expired and could no longer be started.\r\n	System	396	LDAPSVC	Error
Site Server LDAP Service could not establish Secure Sockets Layer (SSL) channel.  Verify that a proper certificate is installed correctly.  The data area, shown below, contains the return error code.\r\n	System	397	LDAPSVC	Error
Cannot allocate %1 because there is not enough memory available.\r\n	System	398	LDAPSVC	Error
Cannot allocate %1 because the preallocated limit has been reached.\r\n	System	399	LDAPSVC	Error
Site Server LDAP Service rejected the connection attempt because there are too many users connected.\r\n	System	400	LDAPSVC	Error
Site Server LDAP Service cannot initialize the socket library. Check the TCP/IP configuration.\r\n	System	401	LDAPSVC	Error
The DNS server could not create a Transmission Control Protocol (TCP) socket.\r\nRestart the DNS server or reboot the computer.  For the specific error code, see\r\nthe Record Data page.\r\n	DNS Server	403	DNS	Error
The DNS server could not bind a Transmission Control Protocol (TCP) socket\r\nto address %1.  Restart the DNS server or reboot the computer.  For specific\r\nerror code, see the Record Data page.  An IP address of 0.0.0.0 can indicate\r\na valid "any addr	DNS Server	404	DNS	Error
The DNS server could not listen on Transmission Control Protocol (TCP)\r\nsocket for address %1.  Restart the DNS server or reboot your computer.\r\nFor the specific error code, see the Record Data page.  An IP address of 0.0.0.0\r\ncan indicate a valid "	DNS Server	405	DNS	Error
%1 (%2) Direct read found corrupted page %3 with error %4. Please restore the databases from a previous backup.\r\n	Application	406	ESENT	Error
The DNS server could not create a User Datagram Protocol (UDP) socket.\r\nRestart the DNS server or reboot your computer.  For the specific error code,\r\nsee the Record Data page.\r\n	DNS Server	406	DNS	Error
The DNS server could not bind a User Datagram Protocol (UDP) socket to %1.\r\nRestart the DNS server or reboot your computer.  For the specific error code,\r\nsee the Record Data page.\r\n	DNS Server	407	DNS	Error
The DNS server could not open socket for address %1.\r\n%nVerify that this is a valid IP address for the server computer.  If it is NOT valid\r\nuse the Interfaces dialog under Server Properties in the DNS Manager to remove\r\nit from the list of IP inter	DNS Server	408	DNS	Error
The DNS server list of restricted interfaces does not contain a valid IP address\r\nfor the server computer.\r\nThe DNS server will use all IP interfaces on the machine.\r\n%nUse the DNS manager server properties, interfaces dialog, to verify and reset\r\	DNS Server	409	DNS	Error
The DNS server did not bind to all IP addresses available on this server.\r\n%nPlease use the DnsManger server properties interfaces tab to edit the list of\r\nIP addresses on which DNS is running.  Add any missing IP addresses to the\r\nlist.  After addi	DNS Server	411	DNS	Error
The DNS server machine currently has no DNS domain name.  Its DNS name is a single\r\nlabel hostname with no domain (example:  "host" rather than "host.mycompany.com").\r\n%n\r\n%nYou might have forgotten to configure a primary DNS domain for the server c	DNS Server	414	DNS	Warning
Attempt to access invalid address.\r\n	System	487	Kernel	Error
Invalid ProgID.\r\n%nFor additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp.\r\n	System	499	ASP	Warning
The DNS server has detected that the zone %1 has invalid or corrupted\r\nregistry data.  To correct the problem, you can delete the applicable zone\r\nsubkey, located under DNS server parameters in the Windows 2000 registry.\r\nYou can then recreate the z	DNS Server	500	DNS	Error
Windows NT is starting up.\r\n	Security	512	Security	Information
An invalid media type was specified.%0\r\n	System	512	Quartz	Warning
Windows NT is shutting down.\r\nAll logon sessions will be terminated by this shutdown.\r\n	Security	513	Security	Information
An invalid media subtype was specified.%0\r\n	System	513	Quartz	Warning
An authentication package has been loaded by the Local Security Authority.\r\nThis authentication package will be used to authenticate logon attempts.\r\n%n\r\nAuthentication Package Name:%t%1\r\n	Security	514	Security	Information
This object can only be created as an aggregated object.%0\r\n	System	514	Quartz	Warning
A trusted logon process has registered with the Local Security Authority.\r\nThis logon process will be trusted to submit logon requests.\r\n%n\r\n%n\r\nLogon Process Name:%t%1\r\n	Security	515	Security	Information
The enumerator has become invalid.%0\r\n	System	515	Quartz	Warning
Internal resources allocated for the queuing of audit messages have been exhausted,\r\nleading to the loss of some audits.\r\n%n\r\n%tNumber of audit messages discarded:%t%1\r\n	Security	516	Security	Information
At least one of the pins involved in the operation is already connected.%0\r\n	System	516	Quartz	Warning
The audit log was cleared\r\n%n\r\n%tPrimary User Name:%t%1%n\r\n%tPrimary Domain:%t%2%n\r\n%tPrimary Logon ID:%t%3%n\r\n%tClient User Name:%t%4%n\r\n%tClient Domain:%t%5%n\r\n%tClient Logon ID:%t%6%n\r\n	Security	517	Security	Information
This operation cannot be performed because the filter is active.%0\r\n	System	517	Quartz	Warning
An notification package has been loaded by the Security Account Manager.\r\nThis package will be notified of any account or password changes.\r\n%n\r\nNotification Package Name:%t%1\r\n	Security	518	Security	Information
One of the specified pins supports no media types.%0\r\n	System	518	Quartz	Warning
There is no common media type between these pins.%0\r\n	System	519	Quartz	Warning
Two pins of the same direction cannot be connected together.%0\r\n	System	520	Quartz	Warning
The operation cannot be performed because the pins are not connected.%0\r\n	System	521	Quartz	Warning
No sample buffer allocator is available.%0\r\n	System	522	Quartz	Warning
A run-time error occurred.%0\r\n	System	523	Quartz	Warning
No buffer space has been set.%0\r\n	System	524	Quartz	Warning
The buffer is not big enough.%0\r\n	System	525	Quartz	Warning
An invalid alignment was specified.%0\r\n	System	526	Quartz	Warning
Cannot change allocated memory while the filter is active.%0\r\n	System	527	Quartz	Warning
Successful Logon:%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon ID:%t%t%3%n\r\n%tLogon Type:%t%4%n\r\n%tLogon Process:%t%5%n\r\n%tAuthentication Package:%t%6%n\r\n%tWorkstation Name:%t%7\r\n	Security	528	Security	Information
One or more buffers are still active.%0\r\n	System	528	Quartz	Warning
Logon Failure:%n\r\n%tReason:%t%tUnknown user name or bad password%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	529	Security	Information
Cannot allocate a sample when the allocator is not active.%0\r\n	System	529	Quartz	Warning
Logon Failure:%n\r\n%tReason:%t%tAccount logon time restriction violation%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	530	Security	Information
Cannot allocate memory because no size has been set.%0\r\n	System	530	Quartz	Warning
Logon Failure:%n\r\n%tReason:%t%tAccount currently disabled%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	531	Security	Warning
Cannot lock for synchronization because no clock has been defined.%0\r\n	System	531	Quartz	Warning
SMTP service has been started, Version: %1.%2.%3.%4.%5.%6.%7.	System	531	smtpsvc	Information
Logon Failure:%n\r\n%tReason:%t%tThe specified user account has expired%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	532	Security	Warning
Quality messages could not be sent because no quality sink has been defined.%0\r\n	System	532	Quartz	Warning
Logon Failure:%n\r\n%tReason:%t%tUser not allowed to logon at this computer%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	533	Security	Information
A required interface has not been implemented.%0\r\n	System	533	Quartz	Warning
Arithmetic result exceeded 32 bits.\r\n	System	534	Kernel	Error
Logon Failure:%n\r\n%tReason:%tThe user has not been granted the requested%n\r\n%t%tlogon type at this machine%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstatio	Security	534	Security	Warning
An object or name was not found.%0\r\n	System	534	Quartz	Warning
There is a process on other end of the pipe.\r\n	System	535	Kernel	Error
Logon Failure:%n\r\n%tReason:%t%tThe specified account's password has expired%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	535	Security	Information
No combination of intermediate filters could be found to make the connection.%0\r\n	System	535	Quartz	Warning
Waiting for a process to open the other end of the pipe.\r\n	System	536	Kernel	Error
Logon Failure:%n\r\n%tReason:%t%tThe NetLogon component is not active%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	536	Security	Error
No combination of filters could be found to render the stream.%0\r\n	System	536	Quartz	Warning
Could not change formats dynamically.%0\r\n	System	537	Quartz	Warning
Logon Failure:%n\r\n%tReason:%t%tAn unexpected error occurred during logon%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	537	Security	Error
No color key has been set.%0\r\n	System	538	Quartz	Warning
User Logoff:%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon ID:%t%t%3%n\r\n%tLogon Type:%t%4%n\r\n	Security	538	Security	Information
Current pin connection is not using the IOverlay transport.%0\r\n	System	539	Quartz	Warning
Logon Failure:%n\r\n%tReason:%t%tAccount locked out%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%2%n\r\n%tLogon Type:%t%3%n\r\n%tLogon Process:%t%4%n\r\n%tAuthentication Package:%t%5%n\r\n%tWorkstation Name:%t%6\r\n	Security	539	Security	Warning
Current pin connection is not using the IMemInputPin transport.%0\r\n	System	540	Quartz	Warning
Successful Network Logon:%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon ID:%t%t%3%n\r\n%tLogon Type:%t%4%n\r\n%tLogon Process:%t%5%n\r\n%tAuthentication Package:%t%6%n\r\n%tWorkstation Name:%t%7\r\n	Security	540	Security	Information
Setting a color key would conflict with the palette already set.%0\r\n	System	541	Quartz	Warning
IKE security association established.%n\r\nMode: %n%1%n\r\nPeer Identity: %n%2%n\r\nFilter: %n%3%n\r\nParameters: %n%4%n\r\n	Security	541	Security	Information
Setting a palette would conflict with the color key already set.%0\r\n	System	542	Quartz	Warning
IKE security association ended.%n\r\nMode: Data Protection (Quick mode)\r\nFilter: %n%1%n\r\nInbound SPI: %n%2%n\r\nOutbound SPI: %n%3%n\r\n	Security	542	Security	Information
The IP Security policy for ISAKMP/Oakley specified an encryption algorithm that is invalid due to export cryptography restrictions.  All 3DES encryption used by ISAKMP/Oakley is weakened to standard DES encyption.  Generally, this is benign.  ISAKMP/Oakle	Application	542	Oakley	Information
No matching color key is available.%0\r\n	System	543	Quartz	Warning
IKE security association ended.%n\r\nMode: Key Exchange (Main mode)%n\r\nFilter: %n%1%n\r\n	Security	543	Security	Information
No palette is available.%0\r\n	System	544	Quartz	Warning
IKE security association establishment failed because peer could not authenticate.\r\nThe certificate trust could not be established.%n\r\nPeer Identity: %n%1%n\r\nFilter: %n%2%n\r\n	Security	544	Security	Warning
Display does not use a palette.%0\r\n	System	545	Quartz	Warning
IKE peer authentication failed.%n\r\nPeer Identity: %n%1%n\r\nFilter: %n%2%n\r\n	Security	545	Security	Warning
Too many colors for the current display settings.%0\r\n	System	546	Quartz	Warning
IKE security association establishment failed because peer\r\nsent invalid proposal.%n\r\nMode: %n%1%n\r\nFilter: %n%2%n\r\nAttribute: %n%3%n\r\nExpected value: %n%4%n\r\nReceived value: %n%5%n\r\n	Security	546	Security	Information
The state changed while waiting to process the sample.%0\r\n	System	547	Quartz	Warning
IKE security association negotiation failed.%n\r\nMode: %n%1%n\r\nFilter: %n%2%n\r\nFailure Point: %n%3%n\r\nFailure Reason: %n%4%n\r\n	Security	547	Security	Information
The operation could not be performed because the filter is not stopped.%0\r\n	System	548	Quartz	Warning
The operation could not be performed because the filter is not paused.%0\r\n	System	549	Quartz	Warning
The operation could not be performed because the filter is not running.%0\r\n	System	550	Quartz	Warning
The operation could not be performed because the filter is in the wrong state.%0\r\n	System	551	Quartz	Warning
The sample start time is after the sample end time.%0\r\n	System	552	Quartz	Warning
The supplied rectangle is invalid.%0\r\n	System	553	Quartz	Warning
This pin cannot use the supplied media type.%0\r\n	System	554	Quartz	Warning
This sample cannot be rendered.%0\r\n	System	555	Quartz	Warning
This sample cannot be rendered because the end of the stream has been reached.%0\r\n	System	556	Quartz	Warning
An attempt to add a filter with a duplicate name succeeded with a modified name.%0\r\n	System	557	Quartz	Success
An attempt to add a filter with a duplicate name failed.%0\r\n	System	557	Quartz	Warning
A time-out has expired.%0\r\n	System	558	Quartz	Warning
The file format is invalid.%0\r\n	System	559	Quartz	Warning
The list has already been exhausted.%0\r\n	System	560	Quartz	Warning
Object Open:%n\r\n%tObject Server:%t%1%n\r\n%tObject Type:%t%2%n\r\n%tObject Name:%t%3%n\r\n%tNew Handle ID:%t%4%n\r\n%tOperation ID:%t{%5,%6}%n\r\n%tProcess ID:%t%7%n\r\n%tPrimary User Name:%t%8%n\r\n%tPrimary Domain:%t%9%n\r\n%tPrimary Logon ID:%t%10%n\	Security	560	Security	Information
The filter graph is circular.%0\r\n	System	561	Quartz	Warning
Handle Allocated:%n\r\n%tHandle ID:%t%1%n\r\n%tOperation ID:%t{%2,%3}%n\r\n%tProcess ID:%t%4%n\r\n	Security	561	Security	Information
SMTP service instance %1 has been started.	System	561	smtpsvc	Information
Updates are not allowed in this state.%0\r\n	System	562	Quartz	Warning
Handle Closed:%n\r\n%tObject Server:%t%1%n\r\n%tHandle ID:%t%2%n\r\n%tProcess ID:%t%3%n\r\n	Security	562	Security	Information
An attempt was made to queue a command for a time in the past.%0\r\n	System	563	Quartz	Warning
Object Open for Delete:%n\r\n%tObject Server:%t%1%n\r\n%tObject Type:%t%2%n\r\n%tObject Name:%t%3%n\r\n%tNew Handle ID:%t%4%n\r\n%tOperation ID:%t{%5,%6}%n\r\n%tProcess ID:%t%7%n\r\n%tPrimary User Name:%t%8%n\r\n%tPrimary Domain:%t%9%n\r\n%tPrimary Logon	Security	563	Security	Information
The queued command has already been canceled.%0\r\n	System	564	Quartz	Warning
Object Deleted:%n\r\n%tObject Server:%t%1%n\r\n%tHandle ID:%t%2%n\r\n%tProcess ID:%t%3%n\r\n	Security	564	Security	Information
Cannot render the file because it is corrupt.%0\r\n	System	565	Quartz	Warning
Object Open:%n\r\n%tObject Server:%t%1%n\r\n%tObject Type:%t%2%n\r\n%tObject Name:%t%3%n\r\n%tNew Handle ID:%t%4%n\r\n%tOperation ID:%t{%5,%6}%n\r\n%tProcess ID:%t%7%n\r\n%tPrimary User Name:%t%8%n\r\n%tPrimary Domain:%t%9%n\r\n%tPrimary Logon ID:%t%10%n\	Security	565	Security	Information
An overlay advise link already exists.%0\r\n	System	566	Quartz	Warning
The state transition has not completed.%0\r\n	System	567	Quartz	Success
No full-screen modes are available.%0\r\n	System	568	Quartz	Warning
This Advise cannot be canceled because it was not successfully set.%0\r\n	System	569	Quartz	Warning
A full-screen mode is not available.%0\r\n	System	570	Quartz	Warning
Cannot call IVideoWindow methods while in full-screen mode.%0\r\n	System	571	Quartz	Warning
The media type of this file is not recognized.%0\r\n	System	572	Quartz	Warning
Special privileges assigned to new logon:%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon ID:%t%t%3%n\r\n%tAssigned:%t%t%4\r\n	Security	576	Security	Information
The source filter for this file could not be loaded.%0\r\n	System	577	Quartz	Warning
Privileged Service Called:%n\r\n%tServer:%t%t%1%n\r\n%tService:%t%t%2%n\r\n%tPrimary User Name:%t%3%n\r\n%tPrimary Domain:%t%4%n\r\n%tPrimary Logon ID:%t%5%n\r\n%tClient User Name:%t%6%n\r\n%tClient Domain:%t%7%n\r\n%tClient Logon ID:%t%8%n\r\n%tPrivilege	Security	577	Security	Information
Some of the streams in this movie are in an unsupported format.%0\r\n	System	578	Quartz	Success
Privileged object operation:%n\r\n%tObject Server:%t%1%n\r\n%tObject Handle:%t%2%n\r\n%tProcess ID:%t%3%n\r\n%tPrimary User Name:%t%4%n\r\n%tPrimary Domain:%t%5%n\r\n%tPrimary Logon ID:%t%6%n\r\n%tClient User Name:%t%7%n\r\n%tClient Domain:%t%8%n\r\n%tCli	Security	578	Security	Information
A file appeared to be incomplete.%0\r\n	System	579	Quartz	Warning
The version number of the file is invalid.%0\r\n	System	580	Quartz	Warning
The file contained some property settings that were not used.%0\r\n	System	581	Quartz	Success
Some connections have failed and have been deferred.%0\r\n	System	582	Quartz	Success
This file is corrupt: it contains an invalid class identifier.%0\r\n	System	583	Quartz	Warning
This file is corrupt: it contains an invalid media type.%0\r\n	System	584	Quartz	Warning
No time stamp has been set for this sample.%0\r\n	System	585	Quartz	Warning
The resource specified is no longer needed.%0\r\n	System	592	Quartz	Success
A new process has been created:%n\r\n%tNew Process ID:%t%1%n\r\n%tImage File Name:%t%2%n\r\n%tCreator Process ID:%t%3%n\r\n%tUser Name:%t%4%n\r\n%tDomain:%t%t%5%n\r\n%tLogon ID:%t%t%6%n\r\n	Security	592	Security	Information
A process has exited:%n\r\n%tProcess ID:%t%1%n\r\n%tUser Name:%t%2%n\r\n%tDomain:%t%t%3%n\r\n%tLogon ID:%t%t%4%n\r\n	Security	593	Security	Information
No media time stamp has been set for this sample.%0\r\n	System	593	Quartz	Warning
A handle to an object has been duplicated:%n\r\n%tSource Handle ID:%t%1%n\r\n%tSource Process ID:%t%2%n\r\n%tTarget Handle ID:%t%3%n\r\n%tTarget Process ID:%t%4%n\r\n	Security	594	Security	Information
No media time format has been selected.%0\r\n	System	594	Quartz	Warning
Indirect access to an object has been obtained:%n\r\n%tObject Type:%t%1%n\r\n%tObject Name:%t%2%n\r\n%tProcess ID:%t%3%n\r\n%tPrimary User Name:%t%4%n\r\n%tPrimary Domain:%t%5%n\r\n%tPrimary Logon ID:%t%6%n\r\n%tClient User Name:%t%7%n\r\n%tClient Domain:	Security	595	Security	Information
Cannot change balance because audio device is mono only.%0\r\n	System	595	Quartz	Warning
A connection could not be made with the media type in the persistent graph,%0\r\nbut has been made with a negotiated media type.%0\r\n	System	596	Quartz	Success
Cannot play back the video stream: no suitable decompressor could be found.%0\r\n	System	597	Quartz	Warning
Cannot play back the audio stream: no audio hardware is available, or the hardware is not responding.%0\r\n	System	598	Quartz	Warning
Cannot play back the video stream: no suitable decompressor could be found.%0\r\n	System	599	Quartz	Success
Cannot play back the audio stream: no audio hardware is available.%0\r\n	System	600	Quartz	Success
Cannot play back the video stream: format 'RPZA' is not supported.%0\r\n	System	601	Quartz	Warning
Cannot play back the video stream: format 'RPZA' is not supported.%0\r\n	System	602	Quartz	Success
ActiveMovie cannot play MPEG movies on this processor.%0\r\n	System	603	Quartz	Warning
Cannot play back the audio stream: the audio format is not supported.%0\r\n	System	604	Quartz	Warning
Cannot play back the video stream: the video format is not supported.%0\r\n	System	605	Quartz	Warning
ActiveMovie cannot play this video stream because it falls outside the constrained standard.%0\r\n	System	606	Quartz	Warning
Cannot perform the requested function on an object that is not in the filter graph.%0\r\n	System	607	Quartz	Warning
The value returned had to be estimated.  It's accuracy can not be guaranteed.%0\r\n	System	608	Quartz	Success
User Right Assigned:%n\r\n%tUser Right:%t%1%n\r\n%tAssigned To:%t%2%n\r\n%tAssigned By:%n\r\n%tUser Name:%t%3%n\r\n%tDomain:%t%t%4%n\r\n%tLogon ID:%t%t%5%n\r\n	Security	608	Security	Information
%1 (%2) The database engine is initiating index cleanup of database '%3' as a result of an NT version upgrade from %4.%5.%6 SP%7 to %8.%9.%10 SP%11.\r\n	Application	609	ESENT	Information
User Right Removed:%n\r\n%tUser Right:%t%1%n\r\n%tRemoved From:%t%2%n\r\n%tRemoved By:%n\r\n%tUser Name:%t%3%n\r\n%tDomain:%t%t%4%n\r\n%tLogon ID:%t%t%5%n\r\n	Security	609	Security	Information
Cannot get or set time related information on an object that is using a time format of TIME_FORMAT_NONE.%0\r\n	System	609	Quartz	Warning
New Trusted Domain:%n\r\n%tDomain Name:%t%1%n\r\n%tDomain ID:%t%2%n\r\n%tEstablished By:%n\r\n%tUser Name:%t%3%n\r\n%tDomain:%t%t%4%n\r\n%tLogon ID:%t%t%5%n\r\n	Security	610	Security	Information
The connection cannot be made because the stream is read only and the filter alters the data.%0\r\n	System	610	Quartz	Warning
This success code is reserved for internal purposes within ActiveMovie.%0\r\n	System	611	Quartz	Success
Removing Trusted Domain:%n\r\n%tDomain Name:%t%1%n\r\n%tDomain ID:%t%2%n\r\n%tRemoved By:%n\r\n%tUser Name:%t%3%n\r\n%tDomain:%t%t%4%n\r\n%tLogon ID:%t%t%5%n\r\n	Security	611	Security	Information
%1 (%2) The database engine has successfully completed index cleanup on database '%3'.\r\n	Application	612	ESENT	Information
Audit Policy Change:%n\r\nNew Policy:%n\r\n%tSuccess%tFailure%n\r\n%t    %3%t    %4%tLogon/Logoff%n\r\n%t    %5%t    %6%tObject Access%n\r\n%t    %7%t    %8%tPrivilege Use%n\r\n%t    %13%t    %14%tAccount Management%n\r\n%t    %11%t    %12%tPolicy Change%	Security	612	Security	Information
The buffer is not full enough.%0\r\n	System	612	Quartz	Warning
IPSec policy agent started: %t%1%n\r\nPolicy Source: %t%2%n\r\n%3%n\r\n	Security	613	Security	Information
Cannot play back the file.  The format is not supported.%0\r\n	System	613	Quartz	Warning
IPSec policy agent disabled: %t%1%n\r\n%2%n\r\n	Security	614	Security	Information
Pins cannot connect due to not supporting the same transport.%0\r\n	System	614	Quartz	Warning
The stream has been turned off.%0\r\n	System	615	Quartz	Success
IPSec policy agent changed: %t%1%n\r\nPolicySource: %t%2%n\r\n%3%n\r\n	Security	615	Security	Information
The graph can't be cued because of lack of or corrupt data.%0\r\n	System	616	Quartz	Success
IPSec policy agent encountered a potentially serious failure.%n\r\n%1%n\r\n	Security	616	Security	Warning
The Video CD can't be read correctly by the device or is the data is corrupt.%0\r\n	System	617	Quartz	Warning
The stop time for the sample was not set.%0\r\n	System	624	Quartz	Success
User Account Created:%n\r\n%tNew Account Name:%t%1%n\r\n%tNew Domain:%t%2%n\r\n%tNew Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges%t%t%7%n\r\n	Security	624	Security	Information
User Account Type Change:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tNew Type:%t%4%n\r\n%tCaller User Name:%t%5%n\r\n%tCaller Domain:%t%6%n\r\n%tCaller Logon ID:%t%7%n\r\n	Security	625	Security	Information
There is not enough Video Memory at this display resolution and number of colors. Reducing resolution might help.%0\r\n	System	625	Quartz	Warning
User Account Enabled:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n	Security	626	Security	Information
The VideoPort connection negotiation process has failed.%0\r\n	System	626	Quartz	Warning
Change Password Attempt:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	627	Security	Warning
Either DirectDraw has not been installed or the Video Card capabilities are not suitable. Make sure the display is not in 16 color mode.%0\r\n	System	627	Quartz	Warning
User Account password set:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n	Security	628	Security	Information
No VideoPort hardware is available, or the hardware is not responding.%0\r\n	System	628	Quartz	Warning
User Account Disabled:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n	Security	629	Security	Information
No Capture hardware is available, or the hardware is not responding.%0\r\n	System	629	Quartz	Warning
User Account Deleted:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	630	Security	Information
This User Operation is inhibited by DVD Content at this time.%0\r\n	System	630	Quartz	Warning
Security Enabled Global Group Created:%n\r\n%tNew Account Name:%t%1%n\r\n%tNew Domain:%t%2%n\r\n%tNew Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	631	Security	Information
This Operation is not permitted in the current domain.%0\r\n	System	631	Quartz	Warning
Security Enabled Global Group Member Added:%n\r\n%tMember Name:%t%1%n\r\n%tMember ID:%t%2%n\r\n%tTarget Account Name:%t%3%n\r\n%tTarget Domain:%t%4%n\r\n%tTarget Account ID:%t%5%n\r\n%tCaller User Name:%t%6%n\r\n%tCaller Domain:%t%7%n\r\n%tCaller Logon ID	Security	632	Security	Information
Requested Button is not available.%0\r\n	System	632	Quartz	Warning
Security Enabled Global Group Member Removed:%n\r\n%tMember Name:%t%1%n\r\n%tMember ID:%t%2%n\r\n%tTarget Account Name:%t%3%n\r\n%tTarget Domain:%t%4%n\r\n%tTarget Account ID:%t%5%n\r\n%tCaller User Name:%t%6%n\r\n%tCaller Domain:%t%7%n\r\n%tCaller Logon	Security	633	Security	Information
DVD-Video playback graph has not been built yet.%0\r\n	System	633	Quartz	Warning
Security Enabled Global Group Deleted:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	634	Security	Information
DVD-Video playback graph building failed.%0\r\n	System	634	Quartz	Warning
Security Disabled Local Group Created:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	635	Security	Information
DVD-Video playback graph could not be built due to insufficient decoders.%0\r\n	System	635	Quartz	Warning
Security Enabled Local Group Member Added:%n\r\n%tMember Name:%t%1%n\r\n%tMember ID:%t%2%n\r\n%tTarget Account Name:%t%3%n\r\n%tTarget Domain:%t%4%n\r\n%tTarget Account ID:%t%5%n\r\n%tCaller User Name:%t%6%n\r\n%tCaller Domain:%t%7%n\r\n%tCaller Logon ID:	Security	636	Security	Information
Version number of DirectDraw not suitable. Make sure to install dx5 or higher version.%0\r\n	System	636	Quartz	Warning
Security Enabled Local Group Member Removed:%n\r\n%tMember Name:%t%1%n\r\n%tMember ID:%t%2%n\r\n%tTarget Account Name:%t%3%n\r\n%tTarget Domain:%t%4%n\r\n%tTarget Account ID:%t%5%n\r\n%tCaller User Name:%t%6%n\r\n%tCaller Domain:%t%7%n\r\n%tCaller Logon I	Security	637	Security	Information
Copy protection cannot be enabled. Please make sure any other copy protected content is not being shown now.%0\r\n	System	637	Quartz	Warning
There was no preview pin available, so the capture pin output is being split to provide both capture and preview.%0\r\n	System	638	Quartz	Success
Security Enabled Local Group Deleted:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	638	Security	Warning
Security Enabled Local Group Changed:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	639	Security	Information
This object cannot be used anymore as its time has expired.%0\r\n	System	639	Quartz	Warning
General Account Database Change:%n\r\n%tType of change:%t%1%n\r\n%tObject Type:%t%2%n\r\n%tObject Name:%t%3%n\r\n%tObject ID:%t%4%n\r\n%tCaller User Name:%t%5%n\r\n%tCaller Domain:%t%6%n\r\n%tCaller Logon ID:%t%7%n\r\n	Security	640	Security	Information
Security Enabled Global Group Changed:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Domain:%t%2%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n%tPrivileges:%t%7%n\r\n	Security	641	Security	Information
User Account Changed:%n\r\n%t%1%n\r\n%tTarget Account Name:%t%2%n\r\n%tTarget Domain:%t%3%n\r\n%tTarget Account ID:%t%4%n\r\n%tCaller User Name:%t%5%n\r\n%tCaller Domain:%t%6%n\r\n%tCaller Logon ID:%t%7%n\r\n%tPrivileges:%t%8%n\r\n	Security	642	Security	Warning
Domain Policy Changed:%n\r\n%tDomain:%t%t%1%n\r\n%tDomain ID:%t%2%n\r\n%tCaller User Name:%t%3%n\r\n%tCaller Domain:%t%4%n\r\n%tCaller Logon ID:%t%5%n\r\n%tPrivileges:%t%6%n\r\n	Security	643	Security	Warning
User Account Locked Out:%n\r\n%tTarget Account Name:%t%1%n\r\n%tTarget Account ID:%t%3%n\r\n%tCaller Machine Name:%t%2%n\r\n%tCaller User Name:%t%4%n\r\n%tCaller Domain:%t%5%n\r\n%tCaller Logon ID:%t%6%n\r\n	Security	644	Security	Information
Authentication Ticket Granted:%n\r\n%tUser Name:%t%t%1%n\r\n%tSupplied Realm Name:%t%2%n\r\n%tUser ID:%t%3%n\r\n%tService Name:%t%t%4%n\r\n%tService ID:%t%t%5%n\r\n%tTicket Options:%t%t%6%n\r\n%tTicket Encryption Type:%t%7%n\r\n%tPre-Authentication Type:%	Security	672	Security	Information
Service Ticket Granted:%n\r\n%tUser Name:%t%t%1%n\r\n%tUser Domain:%t%t%2%n\r\n%tService Name:%t%t%3%n\r\n%tService ID:%t%t%4%n\r\n%tTicket Options:%t%t%5%n\r\n%tTicket Encryption Type:%t%6%n\r\n%tClient Address:%t%t%7%n\r\n	Security	673	Security	Information
Ticket Granted Renewed:%n\r\n%tUser Name:%t%1%n\r\n%tUser Domain:%t%2%n\r\n%tService Name:%t%3%n\r\n%tService ID:%t%4%n\r\n%tTicket Options:%t%5%n\r\n%tTicket Encryption Type:%t%6%n\r\n%tClient Address:%t%7%n\r\n	Security	674	Security	Information
Pre-authentication failed:%n\r\n%tUser Name:%t%t%1%n\r\n%tUser ID:%t%t%2%n\r\n%tService Name:%t%t%3%n\r\n%tPre-Authentication Type:%t%4%n\r\n%tFailure Code:%t%t%5%n\r\n%tClient Address:%t%t%6%n\r\n	Security	675	Security	Error
Authentication Ticket Request Failed:%n\r\n%tUser Name:%t%1%n\r\n%tSupplied Realm Name:%t%2%n\r\n%tService Name:%t%3%n\r\n%tTicket Options:%t%4%n\r\n%tFailure Code:%t%5%n\r\n%tClient Address:%t%6%n\r\n	Security	676	Security	Error
Service Ticket Request Failed:%n\r\n%tUser Name:%t%1%n\r\n%tUser Domain:%t%2%n\r\n%tService Name:%t%3%n\r\n%tTicket Options:%t%4%n\r\n%tFailure Code:%t%5%n\r\n%tClient Address:%t%6%n\r\n	Security	677	Security	Error
Account Mapped for Logon by: %1%n\r\nClient Name:%n\r\n%t%2%n\r\n%tMapped Name:%m\r\n%t%3%n\r\n	Security	678	Security	Information
The name:%n\r\n%t%2%n\r\ncould not be mapped for logon by:\r\n%t%1%n\r\n	Security	679	Security	Error
Account Used for Logon by: %1%n\r\nAccount Name:%n\r\n%t%2%n\r\nWorkstation: %n\r\n%t%3%n\r\n	Security	680	Security	Information
The logon to account: %2%n\r\nby: %1%n\r\nfrom workstation: %3%n\r\nfailed. The error code was: %4%n\r\n	Security	681	Security	Information
Session reconnected to winstation:%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon ID:%t%t%3%n\r\n%tSession Name:%t%4%n\r\n%tClient Name:%t%5%n\r\n%tClient Address:%t%6\r\n	Security	682	Security	Information
Session disconnected from winstation:%n\r\n%tUser Name:%t%1%n\r\n%tDomain:%t%t%2%n\r\n%tLogon ID:%t%t%3%n\r\n%tSession Name:%t%4%n\r\n%tClient Name:%t%5%n\r\n%tClient Address:%t%6\r\n	Security	683	Security	Information
The DNS server did not detect any zones of either primary or secondary type.\r\nIt will run as a caching-only server but will not be authoritative for any\r\nzones.  For more information, see the online Help.\r\n	DNS Server	708	DNS	Information
Access to the extended attribute was denied.\r\n	System	994	Kernel	Error
The I/O operation has been aborted because of either a thread exit or an application request.\r\n	System	995	Kernel	Error
Overlapped I/O event is not in a signaled state.\r\n	System	996	Kernel	Error
Overlapped I/O operation is in progress.\r\n	System	997	Kernel	Error
Invalid access to memory location.\r\n	System	998	Kernel	Error
Error performing inpage operation.\r\n	System	999	Kernel	Error
Error opening registry for Parameter information; defaults used for all parameters.\r\nReturn code from RegOpenKeyEx is %1.\r\n	Application	1000	EvntAgnt	Warning
The operation completed successfully.\r\n	Application	1000	IAS	Success
The profile for user %1 was loaded successfully.\r\n	Application	1000	Winlogon	Information
Performance counters for the %1!s! service were loaded successfully.\r\nThe Record Data contains the new index values assigned\r\nto this service.\r\n	Application	1000	LoadPerf	Information
The DHCP service received the unknown option %1, with a length of %2. \r\nThe raw option data is given below.\r\n	System	1000	DHCP	Error
Security configuration is not backed up.\r\n%1\r\n	Application	1000	SceCli	Error
An exception occurred while performing Windows 3.1 migration.  Some data\r\nmay not have been migrated.\r\n	Application	1000	Windows 3.1 Migration	Information
To view existing log sessions and alert scans on %1, you must have read access to the\r\nHKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\SysmonLog\\Log Queries\r\nregistry subkey and its subkeys on that system. Administrators can use Regedt32.exe	System	1000	SysMon	Error
The MS Telnet Service has started successfully.\r\n	Application	1000	TlntSvr	Information
The MS Telnet Service has started successfully.\r\n	Application	1000	TlntSvr	Information
Windows cannot set the timer. %s Return value  (%d).	Application	1000	Userenv	Error
Failed to set the user's home directory %1.\r\n	Application	1000	Winlogon	Error
Error opening registry for EventLogFiles information. Extension agent cannot run.\r\nReturn code from RegOpenKeyEx is %1.\r\n	Application	1001	EvntAgnt	Error
An internal error occurred. Check the event log for additional information on what might have caused this error.\r\n	Application	1001	IAS	Error
The profile for user %1 was unloaded successfully.\r\n	Application	1001	Winlogon	Information
Recursion too deep; the stack overflowed.\r\n	System	1001	Kernel	Error
The SNMP Service has started successfully.\r\n	System	1001	SNMP	Information
Performance counters for the %1!s! service were removed successfully.\r\nThe Record Data contains the new values of the system Last Counter and \r\nLast Help registry entries.\r\n	Application	1001	LoadPerf	Information
The DHCP service failed to register with Service Controller. \r\nThe following error occurred: %n%1.\r\n	System	1001	DHCP	Error
Security policy cannot be propagated.\r\n%1\r\n	Application	1001	SceCli	Error
The entire contents of %1 was migrated into the Windows NT registry.\r\n	Application	1001	Windows 3.1 Migration	Information
To complete this task, you must have full control access to the\r\nHKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\SysmonLog\\Log Queries\r\nregistry subkey on %1. In general, administrators have this access by default.\r\nAdministrators can gran	System	1001	SysMon	Error
No Event Logs were specified for event scanning.\r\nExtension agent is terminating.\r\n	Application	1002	EvntAgnt	Error
The service does not have sufficient access rights to process the request.\r\n	Application	1002	IAS	Error
The profile for user %1 is mandatory.\r\n	Application	1002	Winlogon	Information
The window cannot act on the sent message.\r\n	System	1002	Kernel	Error
The DHCP service failed to initialize its global parameters. \r\nThe following error occurred: %n%1\r\n	System	1002	DHCP	Error
Default group policy object cannot be created.\r\n%1\r\n	Application	1002	SceCli	Error
The entire contents of the %1 section of %2 was migrated into the\r\nWindows NT registry.\r\n	Application	1002	Windows 3.1 Migration	Information
The Performance Logs and Alerts service has not been installed on %1. The service will\r\nbe installed the first time that an Administrator opens\r\nPerformance Logs and Alerts to view log sessions and alert scans.\r\n	System	1002	SysMon	Error
The shell stopped unexpectedly and %1 was restarted.\r\n	Application	1002	Winlogon	Information
Initialization of automatic certificate enrollment has failed.  There is possible corruption\r\nof system DLL's required for auto-enrollment.  (%1) %2\r\n	Application	1003	Winlogon	Error
TraceFileName parameter not located in registry;\r\nDefault trace file used is %1.\r\n	Application	1003	EvntAgnt	Warning
The request was malformed.\r\n	Application	1003	IAS	Error
The mandatory profile %1 was not found, error = %2.\r\n	Application	1003	Winlogon	Warning
Cannot complete this function.\r\n	System	1003	Kernel	Error
The SNMP Service has stopped successfully.\r\n	System	1003	SNMP	Information
Your computer was not able to renew its address from the network (from the\r\nDHCP Server) for the Network Card with network address %1.  The following\r\nerror occured: %n%2.\r\nYour computer will continue to try and obtain an address on its own from\r\n	System	1003	DHCP	Warning
The DHCP service failed to initialize its registry parameters. \r\nThe following error occurred: %n%1\r\n	System	1003	DHCP	Error
Policy change from LSA/SAM can't be saved in the policy storage.\r\n%1\r\n	Application	1003	SceCli	Error
The value of the %1 variable in the %2 section of %3 was migrated into\r\nthe Windows NT registry.\r\n	Application	1003	Windows 3.1 Migration	Information
Unable to access computer bootup state on %1. The trace logs node will not be opened. System message is:  \r\n	System	1003	SysMon	Error
TrimFlag parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1004	EvntAgnt	Warning
The service could not access the Active Directory Global Catalog.\r\n	Application	1004	IAS	Error
The user %1 does not have access to the mandatory profile located at %2.\r\n	Application	1004	Winlogon	Warning
Invalid flags.\r\n	System	1004	Kernel	Error
The SNMP Service configuration has been updated successfully.\r\n	System	1004	SNMP	Information
Verification of an automatically enrolled certificate has failed. (%1) %2\r\n	Application	1004	Winlogon	Error
Policy change from LSA/SAM on DC can't be replicated to other DCs.\r\n%1\r\n	Application	1004	SceCli	Error
The entire contents of the %1 Program Manager group was migrated into the\r\nWindows NT registry.\r\n	Application	1004	Windows 3.1 Migration	Information
The DHCP service failed to initialize the database. \r\nThe following error occurred: %n%1\r\n	System	1004	DHCP	Error
The DHCP/BINL service on the local machine, belonging to the Windows\r\nAdministrative domain %2, has determined that it is authorized to start.\r\nIt is servicing clients now.\r\n	System	1004	DHCP	Error
Modifications are not allowed for default logs and alerts.\r\nYou can start or stop the session from the context menu\r\nStart or Stop items or from the associated toolbar buttons.\r\n	System	1004	SysMon	Error
TrimMessage parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1005	EvntAgnt	Warning
The user's account domain is not accessible.\r\n	Application	1005	IAS	Error
The user %1 does not have read permissions on the keys in the profile %2.\r\n	Application	1005	Winlogon	Warning
The volume does not contain a recognized file system.\r\nPlease make sure that all required file system drivers are loaded and that the volume is not corrupted.\r\n	System	1005	Kernel	Error
Unknown or unavailable cert type, %3, requested for automatic certificate enrollment.\r\nThis enrollment will not be performed. (%1) %2\r\n	Application	1005	Winlogon	Error
The contents of the Windows 3.X Program Manager group file %1 was not\r\nmigrated into the Windows NT registry, as a group of that name, %2,\r\nalready existed.\r\n	Application	1005	Windows 3.1 Migration	Information
The DHCP service failed to initialize Winsock startup. \r\nThe following error occurred: %n%1\r\n	System	1005	DHCP	Error
At least one provider is no longer active in the system.\r\nWould you like to remove all inactive providers from the %1 settings?%r\r\nInactive providers:\r\n	System	1005	SysMon	Warning
MaxTrapSize parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1006	EvntAgnt	Warning
The server is unavailable.\r\n	Application	1006	IAS	Information
The default profile was used for user %1.\r\n	Application	1006	Winlogon	Information
The volume for a file has been externally altered so that the opened file is no longer valid.\r\n	System	1006	Kernel	Error
Unable to migrate all or part of the %1 file into the Windows NT registry.\r\n	Application	1006	Windows 3.1 Migration	Warning
The DHCP service failed to start as a RPC server. \r\nThe following error occurred : %n%1\r\n	System	1006	DHCP	Error
Unable to access registered trace providers on %1. The %2 properties will not be opened. System message is:\r\n	System	1006	SysMon	Error
\r\nThe automatically enrolled certificate of type %1 is being renewed for the following reason(s):\r\n%2\r\n	Application	1006	Winlogon	Information
ThresholdEnabled parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1007	EvntAgnt	Warning
The specified domain does not exist.\r\n	Application	1007	IAS	Error
Failed to load the profile %1 for user %2.\r\n	Application	1007	Winlogon	Error
The requested operation cannot be performed in full-screen mode.\r\n	System	1007	Kernel	Error
Unable to migrate all or part of the %1 section of %2 into the Windows\r\nNT registry.\r\n	Application	1007	Windows 3.1 Migration	Warning
The DHCP service failed to initialize Winsock data. \r\nThe following error occurred: %n%1\r\n	System	1007	DHCP	Error
The boot mode for %1 is a fail-safe mode. Trace providers\r\nare available only in normal mode. The trace logs node\r\nwill not be opened.\r\n	System	1007	SysMon	Error
The automatically enrolled certificate of type %1 is being re-enrolled for the following reason(s):\r\n%2\r\n	Application	1007	Winlogon	Information
Threshold parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1008	EvntAgnt	Warning
The specified user does not exist.\r\n	Application	1008	IAS	Error
Failed to unload the profile for user %1.\r\n	Application	1008	Winlogon	Error
An attempt was made to reference a token that does not exist.\r\n	System	1008	Kernel	Error
The Open Procedure for service "%1!s!" in DLL "%2!s!" failed. \r\nPerformance data for this service will not be available. Status code \r\nreturned is data DWORD 0.\r\n	Application	1008	Perflib	Error
The enterprise root certificate store could not be updated.\r\n(%1) %2.\r\n	Application	1008	Winlogon	Error
Unable to migrate the value of the %1 variable in the %2 section of %3\r\ninto the Windows NT registry.\r\n	Application	1008	Windows 3.1 Migration	Warning
The DHCP service is shutting down due to the following error: %n%1\r\n	System	1008	DHCP	Error
The settings do not contain any complete HTML System Monitor objects.\r\n	System	1008	SysMon	Error
ThresholdCount parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1009	EvntAgnt	Warning
Failed to copy the profile for user %1 back to %2.\r\n	Application	1009	Winlogon	Error
The configuration registry database is corrupt.\r\n	System	1009	Kernel	Error
The NT Smartcard authentication certificate store could not be updated.\r\n(%1) %2.\r\n	Application	1009	Winlogon	Error
Unable to migrate the contents of the %1 Program Manager group into\r\nthe Windows NT registry.\r\n	Application	1009	Windows 3.1 Migration	Warning
The DHCP service encountered the following error while cleaning \r\nup the pending client records: %n%1\r\n	System	1009	DHCP	Error
The %1 log or alert has not started.\r\nRefresh the log or alert list to view current status,\r\nor see the application event log for any errors. \r\n	System	1009	SysMon	Warning
The DHCP service encountered the following error while cleaning \r\nup the database: %n%1\r\n	System	1010	DHCP	Error
ThresholdCount parameter is an invalid value in the registry;\r\nDefault value used is %1.\r\n	Application	1010	EvntAgnt	Warning
There was an authentication failure because of an unknown user name or a bad password.\r\n	Application	1010	IAS	Error
Failed to set the user's home directory %1.\r\n	Application	1010	Winlogon	Error
The configuration registry key is invalid.\r\n	System	1010	Kernel	Error
A registry entry is corrupt.%0\r\n	System	1010	Quartz	Warning
Unable to load the contents of the Windows 3.1 Program Manager group file %1.\r\nError Code was %2.  Group not migrated to the Windows NT registry.\r\n	Application	1010	Windows 3.1 Migration	Warning
The DHCP service encountered the following error while cleaning \r\nup the database: %n%1\r\n	System	1010	DHCP	Error
The %1 log or alert has not stopped.\r\nRefresh the list to update current status,\r\nor view the application event log for any errors. \r\n	System	1010	SysMon	Error
Automatic enrollment against the certification authority %4 for a certificate of type %3 has\r\nfailed.  (%1) %2.   Another certification authority will be tried.\r\n	Application	1010	Winlogon	Warning
ThresholdTime parameter not located in registry;\r\nDefault value used is %1.\r\n	Application	1011	EvntAgnt	Warning
A user could not change their password because the new password did not meet the requirements for this network.\r\n	Application	1011	IAS	Error
The profile for user %1 is already loaded due to a previous unload failure. The profile will appear in the state in was during the last logon session.\r\n	Application	1011	Winlogon	Warning
The configuration registry key could not be opened.\r\n	System	1011	Kernel	Error
Unable to read the value of %1 from the %2 file.  Group not migrated to\r\nthe Windows NT registry.\r\n	Application	1011	Windows 3.1 Migration	Warning
The DHCP service issued a NACK (negative acknowledgement message)\r\nto the client, %2, for the address, %1.\r\n	System	1011	DHCP	Error
The certificate returned from an auto-enrollment is incorrect.  Subsequent auto-enrollment cycles\r\nwill ignore reasons for failure.  Please contact your system administrator.  The reasons for failure are\r\nlisted below:\r\n%2\r\n	Application	1011	Winlogon	Warning
ThresholdTime parameter is an invalid value in the registry;\r\nDefault value used is %1.\r\n	Application	1012	EvntAgnt	Warning
The specified authentication type is not supported on this system.\r\n	Application	1012	IAS	Error
Failed to load the profile %1 for user %2. See below for error code.\r\n	Application	1012	Winlogon	Error
The configuration registry key could not be read.\r\n	System	1012	Kernel	Error
The automatic certificate enrollment subsystem could not access local resources needed for enrollment.  \r\nEnrollment will not been performed. (%1) %2\r\n	Application	1012	Winlogon	Error
Unable to convert the contents of the Windows 3.1 Program Manager group\r\nfile %1.  into the Windows NT format.  Error Code was %2.  Group not\r\nmigrated to the Windows NT registry.\r\n	Application	1012	Windows 3.1 Migration	Warning
The DHCP client, %2, declined the address %1.\r\n	System	1012	DHCP	Error
TraceFileName parameter is of the wrong type in the registry;\r\nDefault trace file used is %1.\r\n	Application	1013	EvntAgnt	Warning
The central profile %1 for user %2 is not available. See error code below.\r\n	Application	1013	Winlogon	Warning
The configuration registry key could not be written.\r\n	System	1013	Kernel	Error
The automatic certificate enrollment subsystem could not access network resources needed for enrollment.  \r\nEnrollment will  been performed. (%1) %2\r\n	Application	1013	Winlogon	Error
The DHCP Client, %2, released the address %1.\r\n	System	1013	DHCP	Error
Error (%1) encountered while writing to accounting file. MSIDLPM will stop writing to the accounting file, due to the error, and will restart after the next policy cache timeout.	System	1013	RSVP	Error
Contents of %1 migrated to the Windows NT registry.	Application	1013	Windows 3.1 Migration	Warning
The JET Database call returned the following error : %1.\r\n\r\nAdditional Debug Information: %2.\r\n	System	1014	DhcpServer	Error
TraceLevel parameter is of the wrong type in the registry;\r\nDefault trace level used is %1.\r\n	Application	1014	EvntAgnt	Warning
Failed to copy the user default profile to a local copy for user %1.\r\n	Application	1014	Winlogon	Error
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.\r\n	System	1014	Kernel	Error
A security failure is preventing automatic certificate enrollment.  \r\nEnrollment will  been performed. (%1) %2\r\n	Application	1014	Winlogon	Error
Unable to migrate all or part of %1 to the Windows NT registry.\r\n	Application	1014	Windows 3.1 Migration	Warning
The JET Database call returned the following error : %1.\r\n\r\nAdditional Debug Information: %2.\r\n	System	1014	DHCP	Error
TraceLevel parameter not located in registry;\r\nDefault trace level used is %1.\r\n	Application	1015	EvntAgnt	Warning
Failed to save the system default profile to a local profile for user %1.\r\n	Application	1015	Winlogon	Error
The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.\r\n	System	1015	Kernel	Error
Did not migrate the contents of the %1 Program Manager group into\r\nthe Windows NT registry.  It is incompatible with Windows NT.\r\n	Application	1015	Windows 3.1 Migration	Warning
The JET Database call returned the following warning : %1.\r\n\r\nAdditional Debug Information: %2.\r\n	System	1015	DHCP	Error
The DHCP service encountered the following error when \r\nbacking up the database: %n%1\r\n	System	1016	DHCP	Error
Error reading Parameter key information from the registry.\r\nReturn code from RegEnumValue is %1. Index value is %2.\r\nExtension agent terminating.\r\n	Application	1016	EvntAgnt	Error
Failed to set the proper security in user's copy of the default profile for user %1. The profile can not be loaded.\r\n	Application	1016	Winlogon	Error
An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.\r\n	System	1016	Kernel	Error
The DHCP service encountered the following error when \r\nbacking up the database: %n%1\r\n	System	1016	DHCP	Error
Error reading EventLogFiles key information from the registry.\r\nReturn code from RegEnumValue is %1. Index value is %2.\r\nExtension agent terminating.\r\n	Application	1017	EvntAgnt	Error
The user %1 was given a copy of the default profile but loading the profile failed.\r\n	Application	1017	Winlogon	Error
The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.\r\n	System	1017	Kernel	Error
The DHCP service encountered the following error when \r\nbacking up the registry configuration: %n%1\r\n	System	1017	DHCP	Error
No BaseEnterpriseOID parameter found in registry.\r\nExtension agent terminating.\r\n	Application	1018	EvntAgnt	Error
The central profile %1 for user %2 is not updated. No central profile updates are allowed from this computer.\r\n	Application	1018	Winlogon	Information
Illegal operation attempted on a registry key that has been marked for deletion.\r\n	System	1018	Kernel	Error
The DHCP service failed to restore the database. \r\nThe following error occurred: %n%1\r\n	System	1018	DHCP	Error
No SupportedView parameter found in registry.\r\nExtension agent terminating.\r\n	Application	1019	EvntAgnt	Error
Failed to load the local cached profile for user %1.\r\n	Application	1019	Winlogon	Warning
System could not allocate the required space in a registry log.\r\n	System	1019	Kernel	Error
The DHCP service failed to restore the DHCP registry configuration. \r\nThe following error occurred: %n%1\r\n	System	1019	DHCP	Error
Error processing registry parameters.\r\nExtension agent terminating.\r\n	Application	1020	EvntAgnt	Error
The current configuration only supports local user accounts.\r\n	Application	1020	IAS	Error
The central profile %1 was copied over the user's cached profile.\r\n	Application	1020	Winlogon	Information
Cannot create a symbolic link in a registry key that already has subkeys or values.\r\n	System	1020	Kernel	Error
Scope, %1, is %2 percent full with only %3 IP addresses remaining.\r\n	System	1020	DHCP	Error
Unable to convert BaseEnterpriseOID from string to ASN.1 OID.\r\nExtension agent terminating.\r\n	Application	1021	EvntAgnt	Error
The user must change their password.\r\n	Application	1021	IAS	Information
The user's cached profile was copied over the central profile %1.\r\n	Application	1021	Winlogon	Information
Cannot create a stable subkey under a volatile parent key.\r\n	System	1021	Kernel	Error
The DHCP service could not load the JET database library successfully.\r\n	System	1021	DHCP	Error
Unable to convert EnterpriseOID from string to ASN.1 OID.\r\nTrap cannot be sent.\r\n	Application	1022	EvntAgnt	Error
The log on failed because the account is currently disabled. The person with administrative rights for the computer must enable the account.\r\n	Application	1022	IAS	Error
Failed to copy the central profile %1 over the user's cached profile.\r\n	Application	1022	Winlogon	Warning
A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.\r\n	System	1022	Kernel	Error
The DHCP service could not use the database. If this service\r\nwas started for the first time after the upgrade from NT 3.51 \r\nor earlier, you need to run the utility, upg351db.exe, on the \r\nDHCP database to convert it to the new JET database format.	System	1022	DHCP	Error
Unable to convert SupportedView from string to ASN.1 OID.\r\nExtension agent terminating.\r\n	Application	1023	EvntAgnt	Error
The user's account has expired. The person with administrative rights for the computer must re-establish the account.\r\n	Application	1023	IAS	Error
Failed to copy the user's cached profile over the central profile %1.\r\n	Application	1023	Winlogon	Warning
The DHCP service will now terminate because the existing database\r\nneeds conversion to Windows 2000 format.  The conversion via the \r\njetconv process, has initiated.  Do not reboot or stop the jetconv\r\nprocess.  \r\n\r\nThe conversion may take up to	System	1023	DHCP	Error
Unable to locate ParameterMessageFile for %1. RegOpenKeyEx returned %2.\r\n	Application	1024	EvntAgnt	Error
The user's account is currently locked out and may not be logged on to. Only the person with administrative rights for the computer can unlock a user account.\r\n	Application	1024	IAS	Error
The DHCP service has initialized and is ready\r\n	System	1024	DHCP	Information
Unable to load PrimaryModule %1. LoadLibraryEx returned %2.\r\n	Application	1025	EvntAgnt	Error
The log on failed because of an account logon time restriction violation.\r\n	Application	1025	IAS	Error
The DHCP service was unable to read the BOOTP file table from \r\nthe registry.  The DHCP service will be unable to respond to \r\nBOOTP requests that specify the boot file name.\r\n	System	1025	DHCP	Error
Unable to set Threshold key in registry. Processing will continue.\r\nReturn code from RegSetValueEx is %1.\r\n	Application	1026	EvntAgnt	Warning
The log on failed because of a user account restriction.\r\n	Application	1026	IAS	Error
The DHCP service was unable to read the global BOOTP file name \r\nfrom the registry.\r\n	System	1026	DHCP	Error
The audit log file cannot be appended.\r\n	System	1027	DHCP	Error
The DHCP service failed to initialize the audit log. \r\nThe following error occurred: %n%1\r\n	System	1028	DHCP	Error
The DHCP service was unable to ping for a new IP address. \r\nThe address was leased to the client.\r\n	System	1029	DHCP	Error
The user's information did not match a Remote Access Policy.\r\n	Application	1030	IAS	Error
The audit log file could not be backed up.  The following error\r\noccurred: %n%1\r\n	System	1030	DHCP	Error
The installed server callout .dll file has caused an exception.\r\nThe exception was: %n%1.  The server has ignored this exception. \r\nAll further exceptions will be ignored.\r\n	System	1031	DHCP	Error
The installed server callout .dll file has caused an exception.\r\nThe exception was: %n%1.  The server has ignored this exception \r\nand the .dll file could not be loaded.\r\n	System	1032	DHCP	Error
The DHCP service has successfully loaded one or more callout DLLs.\r\n	System	1033	DHCP	Information
The DHCP service has failed to load one or more callout DLLs.  \r\nThe following error occured: %n%1\r\n	System	1034	DHCP	Error
\r\nThe DHCP service was unable to create or lookup the DHCP Users\r\nlocal group on this computer.  The error code is in the data.\r\n	System	1035	DHCP	Error
\r\nThe DHCP server was unable to create or lookup the DHCP Administrators \r\nlocal group on this computer.  The error code is in the data.\r\n	System	1036	DHCP	Error
\r\nThe DHCP service has started to clean up the database.\r\n	System	1037	DHCP	Information
\r\nThe DHCP service has cleaned up the database for unicast \r\nIP addresses -- %1 leases have been recovered and %2 records \r\nhave been removed from the database.\r\n	System	1038	DHCP	Information
\r\nThe DHCP service has cleaned up the database for multicast \r\nIP addresses -- %1 leases have expired (been marked for deletion)\r\nand %2 records have been removed from the database.\r\n	System	1039	DHCP	Information
The user has exceeded the dial-in lockout count.\r\n	Application	1040	IAS	Error
The DHCP service successfully restored the database.\r\n	System	1040	DHCP	Information
The user is not allowed dial-in access to the network.\r\n	Application	1041	IAS	Error
The user attempted to use an unauthorized authentication method.\r\n	Application	1042	IAS	Error
The DHCP/BINL service on the local machine has determined that it is\r\nauthorized to start.  It is servicing clients now.\r\n	System	1043	DHCP	Error
The user tried to connect from an unauthorized calling station.\r\n	Application	1043	IAS	Error
The DHCP/BINL service on the local machine has determined that it is\r\nauthorized to start.  It is servicing clients now.\r\n	System	1043	DHCP	Error
The user tried to dial-in outside of permitted hours.\r\n	Application	1044	IAS	Error
The DHCP/BINL service on the local machine, belonging to the Windows\r\nAdministrative domain %2, has determined that it is authorized to start.\r\nIt is servicing clients now.\r\n	System	1044	DHCP	Error
The user tried to connect using an unauthorized phone number.\r\n	Application	1045	IAS	Error
The DHCP/BINL service on the local machine has determined that it is\r\nnot authorized to start.  It has stopped servicing clients.  The\r\nfollowing are some possible reasons for this: \r\n%n%tThis machine belongs to a workgroup and has encountered anoth	System	1045	DHCP	Error
The DHCP/BINL service on the local machine has determined that it is\r\nnot authorized to start.  It has stopped servicing clients.  The\r\nfollowing are some possible reasons for this: \r\n%n%tThis machine belongs to a workgroup and has encountered anoth	System	1045	DHCP	Error
The user tried to connect using an unauthorized dial-in media.\r\n	Application	1046	IAS	Error
The DHCP/BINL service on the local machine, belonging to the Windows\r\nAdministrative domain %2, has determined that it is not authorized\r\nto start.  It has stopped servicing clients.  The following are\r\nsome possible reasons for this:\r\n%n%tThis ma	System	1046	DHCP	Error
The DHCP/BINL service on the local machine, belonging to the Windows\r\nAdministrative domain %2, has determined that it is not authorized\r\nto start.  It has stopped servicing clients.  The following are\r\nsome possible reasons for this:\r\n%n%tThis ma	System	1046	DHCP	Error
A constraint defined in the Remote Access Policy failed. \r\n	Application	1047	IAS	Error
The DHCP/BINL service on the local machine has determined that it is\r\nauthorized to start.  It is servicing clients now.\r\n%nThe DHCP/BINL service has determined that the machine was recently \r\nupgraded.  If the machine is intended to belong to a dir	System	1047	DHCP	Error
The DHCP/BINL service on the local machine has determined that it is\r\nauthorized to start.  It is servicing clients now.\r\n%nThe DHCP/BINL service has determined that the machine was recently \r\nupgraded.  If the machine is intended to belong to a dir	System	1047	DHCP	Error
The DHCP/BINL Service on the local machine, belonging to Windows Domain\r\n%2, has determined that it is authorized to start.  \r\n\r\nIt is servicing clients now.\r\n\r\nIt has determined that the computer was recently upgraded.  It has also \r\ndetermin	System	1048	DHCP	Error
The DHCP/BINL Service on the local machine, belonging to Windows Domain\r\n%2, has determined that it is authorized to start.  \r\n\r\nIt is servicing clients now.\r\n\r\nIt has determined that the computer was recently upgraded.  It has also \r\ndetermin	System	1048	DHCP	Error
The DHCP/BINL service on the local machine encountered an error while\r\ntrying to find the domain of the local machine.  The error was: %3.\r\n	System	1049	DHCP	Error
The DHCP/BINL service on the local machine encountered an error while\r\ntrying to find the domain of the local machine.  The error was: %3.\r\n	System	1049	DHCP	Error
The service was unable to write the authentication or accounting record. Make sure the drive is not full and is connected to the server.\r\n	Application	1050	IAS	Error
The DHCP/BINL service on the local machine encountered a network error.\r\nThe error was: %3.\r\n	System	1050	DHCP	Error
The DHCP/BINL service on the local machine encountered a network error.\r\nThe error was: %3.\r\n	System	1050	DHCP	Error
The DHCP/BINL service has determined that it is not authorized to\r\nservice clients on this network for the Windows domain: %2.\r\n	System	1051	DHCP	Error
A stop control has been sent to a service that other running services are dependent on.\r\n	System	1051	Kernel	Error
The DHCP/BINL service has determined that it is not authorized to\r\nservice clients on this network for the Windows domain: %2.\r\n	System	1051	DHCP	Error
The DHCP/BINL service on this workgroup server has encountered another\r\nserver with IP Address, %1, belonging to the domain %2.\r\n	System	1052	DHCP	Error
The requested control is not valid for this service.\r\n	System	1052	Kernel	Error
The DHCP/BINL service on this workgroup server has encountered another\r\nserver with IP Address, %1, belonging to the domain %2.\r\n	System	1052	DHCP	Error
The DHCP/BINL service on this Small Business Server\r\nhas encountered another server on this network with \r\nIP Address, %1, belonging to the domain: %2.\r\n	System	1053	DHCP	Error
The service did not respond to the start or control request in a timely fashion.\r\n	System	1053	Kernel	Error
The DHCP/BINL service on this Small Business Server\r\nhas encountered another server on this network with \r\nIP Address, %1, belonging to the domain: %2.\r\n	System	1053	DHCP	Error
The DHCP/BINL service on this computer is shutting down. \r\nSee the previous event log messages for reasons.\r\n	System	1054	DHCP	Information
A thread could not be created for the service.\r\n	System	1054	Kernel	Error
The DHCP/BINL service on this computer is shutting down. \r\nSee the previous event log messages for reasons.\r\n	System	1054	DHCP	Information
The service database is locked.\r\n	System	1055	Kernel	Error
An instance of the service is already running.\r\n	System	1056	Kernel	Error
The account name is invalid or does not exist, or the password is invalid for the account name specified.\r\n	System	1057	Kernel	Error
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.\r\n	System	1058	Kernel	Error
Circular service dependency was specified.\r\n	System	1059	Kernel	Error
The authentication request was dropped because the session timed out.\r\n	Application	1060	IAS	Warning
The specified service does not exist as an installed service.\r\n	System	1060	Kernel	Error
The authentication request was dropped because it contained an unexpected packet.\r\n	Application	1061	IAS	Error
The service cannot accept control messages at this time.\r\n	System	1061	Kernel	Error
The service has not been started.\r\n	System	1062	Kernel	Error
The service process could not connect to the service controller.\r\n	System	1063	Kernel	Error
An exception occurred in the service when handling the control request.\r\n	System	1064	Kernel	Error
The database specified does not exist.\r\n	System	1065	Kernel	Error
The service has returned a service-specific error code.\r\n	System	1066	Kernel	Error
The process terminated unexpectedly.\r\n	System	1067	Kernel	Error
The dependency service or group failed to start.\r\n	System	1068	Kernel	Error
The service did not start due to a logon failure.\r\n	System	1069	Kernel	Error
After starting, the service hung in a start-pending state.\r\n	System	1070	Kernel	Error
The specified service database lock is invalid.\r\n	System	1071	Kernel	Error
The specified service has been marked for deletion.\r\n	System	1072	Kernel	Error
The specified service already exists.\r\n	System	1073	Kernel	Error
The system is currently running with the last-known-good configuration.\r\n	System	1074	Kernel	Error
The dependency service does not exist or has been marked for deletion.\r\n	System	1075	Kernel	Error
The current boot has already been accepted for use as the last-known-good control set.\r\n	System	1076	Kernel	Error
No attempts to start the service have been made since the last boot.\r\n	System	1077	Kernel	Error
The name is already in use as either a service name or a service display name.\r\n	System	1078	Kernel	Error
The account specified for this service is different from the account specified for other services running in the same process.\r\n	System	1079	Kernel	Error
Failure actions can only be set for Win32 services, not for drivers.\r\n	System	1080	Kernel	Error
This service runs in the same process as the service control manager.\r\nTherefore, the service control manager cannot take action if this service's process terminates unexpectedly.\r\n	System	1081	Kernel	Error
No recovery program has been configured for this service.\r\n	System	1082	Kernel	Error
The executable program that this service is configured to run in does not implement the service.\r\n	System	1083	Kernel	Error
The physical end of the tape has been reached.\r\n	System	1100	Kernel	Error
The SNMP Service is ignoring the manager %1 because its name could not be resolved.\r\n	System	1100	SNMP	Warning
Welcome back to the %1 domain.  While you were offline, your settings were stored in a local account. Do you want to move them to your %1 account?%0\r\n	Application	1100	Winlogon	Information
A tape access reached a filemark.\r\n	System	1101	Kernel	Error
Your settings cannot be moved because of an error.  (Error code %1!u!)%0\r\n	Application	1101	Winlogon	Error
The SNMP Service has encountered a fatal error.	System	1101	SNMP	Error
The beginning of the tape or a partition was encountered.\r\n	System	1102	Kernel	Error
%1 (this computer)%0\r\n	Application	1102	Winlogon	Information
The SNMP Service is ignoring trap destination %1 because it is invalid.	System	1102	SNMP	Warning
A tape access reached the end of a set of files.\r\n	System	1103	Kernel	Error
The system could not validate %1. Check your account name, and type your password again. Letters in passwords must be typed using the correct case. Make sure that Caps Lock is not accidentially on.%0\r\n	Application	1103	Winlogon	Error
The SNMP Service is not designed for this operating system.	System	1103	SNMP	Error
No more data is on the tape.\r\n	System	1104	Kernel	Error
The system could not validate %1 on %2. Check your account name, and type your password again. Letters in passwords must be typed using the correct case. Make sure that Caps Lock is not accidentially on.%0\r\n	Application	1104	Winlogon	Error
The SNMP Service registry key %1 is missing or misconfigured.	System	1104	SNMP	Error
Tape could not be partitioned.\r\n	System	1105	Kernel	Error
The SNMP Service is ignoring extension agent key %1 because it is missing or misconfigured.\r\n	System	1105	SNMP	Warning
The user account you just entered does not have the authority to move settings. Please try another account, such as Administrator.%0\r\n	Application	1105	Winlogon	Error
When accessing a new tape of a multivolume partition, the current block size is incorrect.\r\n	System	1106	Kernel	Error
The SNMP Service is ignoring extension agent dll %1 because it is missing or misconfigured.\r\n	System	1106	SNMP	Warning
Tape partition information could not be found when loading a tape.\r\n	System	1107	Kernel	Error
The SNMP Service has reset the registry parameter sysObjectID to a default value.\r\nThis is caused either by an invalid type or by an invalid string format of the registry value.\r\n	System	1107	SNMP	Warning
Unable to lock the media eject mechanism.\r\n	System	1108	Kernel	Error
Unable to unload the media.\r\n	System	1109	Kernel	Error
The media in the drive may have changed.\r\n	System	1110	Kernel	Error
The I/O bus was reset.\r\n	System	1111	Kernel	Error
Unable to complete the current operation on the %1 log or alert. System message is:. \r\n	System	1111	SysMon	Error
No media in drive.\r\n	System	1112	Kernel	Error
The specified program or command file does not exist. \r\n	System	1112	SysMon	Error
No mapping for the Unicode character exists in the target multi-byte code page.\r\n	System	1113	Kernel	Error
Unique name required.  A log or alert with name '%s' already exists.	System	1113	SysMon	Error
A dynamic link library (DLL) initialization routine failed.\r\n	System	1114	Kernel	Error
A system shutdown is in progress.\r\n	System	1115	Kernel	Error
Unable to abort the system shutdown because no shutdown was in progress.\r\n	System	1116	Kernel	Error
The request could not be performed because of an I/O device error.\r\n	System	1117	Kernel	Error
No serial device was successfully initialized. The serial driver will unload.\r\n	System	1118	Kernel	Error
Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.\r\n	System	1119	Kernel	Error
A serial I/O operation was completed by another write to the serial port.\r\n(The IOCTL_SERIAL_XOFF_COUNTER reached zero.)\r\n	System	1120	Kernel	Error
A serial I/O operation completed because the timeout period expired.\r\n(The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)\r\n	System	1121	Kernel	Error
No ID address mark was found on the floppy disk.\r\n	System	1122	Kernel	Error
Mismatch between the floppy disk sector ID field and the floppy disk controller track address.\r\n	System	1123	Kernel	Error
The floppy disk controller reported an error that is not recognized by the floppy disk driver.\r\n	System	1124	Kernel	Error
The floppy disk controller returned inconsistent results in its registers.\r\n	System	1125	Kernel	Error
While accessing the hard disk, a recalibrate operation failed, even after retries.\r\n	System	1126	Kernel	Error
Unable to establish connection with global catalog\r\n	System	1126	NTDS	Error
While accessing the hard disk, a disk operation failed even after retries.\r\n	System	1127	Kernel	Error
While accessing the hard disk, a disk controller reset was needed, but even that failed.\r\n	System	1128	Kernel	Error
Physical end of tape encountered.\r\n	System	1129	Kernel	Error
Not enough server storage is available to process this command.\r\n	System	1130	Kernel	Error
A potential deadlock condition has been detected.\r\n	System	1131	Kernel	Error
The base address or the file offset specified does not have the proper alignment.\r\n	System	1132	Kernel	Error
An attempt to change the system power state was vetoed by another application or driver.\r\n	System	1140	Kernel	Error
The system BIOS failed an attempt to change the system power state.\r\n	System	1141	Kernel	Error
An attempt was made to create more links on a file than the file system supports.\r\n	System	1142	Kernel	Error
The specified program requires a newer version of Windows.\r\n	System	1150	Kernel	Error
The specified program is not a Windows or MS-DOS program.\r\n	System	1151	Kernel	Error
Cannot start more than one instance of the specified program.\r\n	System	1152	Kernel	Error
The specified program was written for an earlier version of Windows.\r\n	System	1153	Kernel	Error
One of the library files needed to run this application is damaged.\r\n	System	1154	Kernel	Error
No application is associated with the specified file for this operation.\r\n	System	1155	Kernel	Error
An error occurred in sending the command to the application.\r\n	System	1156	Kernel	Error
One of the library files needed to run this application cannot be found.\r\n	System	1157	Kernel	Error
The current process has used all of its system allowance of handles for Window Manager objects.\r\n	System	1158	Kernel	Error
The message can be used only with synchronous operations.\r\n	System	1159	Kernel	Error
The indicated source element has no media.\r\n	System	1160	Kernel	Error
The indicated destination element already contains media.\r\n	System	1161	Kernel	Error
The indicated element does not exist.\r\n	System	1162	Kernel	Error
The indicated element is part of a magazine that is not present.\r\n	System	1163	Kernel	Error
The indicated device requires reinitialization due to hardware errors.\r\n	System	1164	Kernel	Error
The device has indicated that cleaning is required before further operations are attempted.\r\n	System	1165	Kernel	Error
The device has indicated that its door is open.\r\n	System	1166	Kernel	Error
The device is not connected.\r\n	System	1167	Kernel	Error
Element not found.\r\n	System	1168	Kernel	Error
Error %1(%2) has occurred (Internal ID %3).  Please contact Microsoft Product Support Services for assistance.\r\n	System	1168	NTDS	Error
The specified property ID is not supported for the specified property set.%0\r\n	System	1168	Quartz	Warning
There was no match for the specified key in the index.\r\n	System	1169	Kernel	Error
The property set specified does not exist on the object.\r\n	System	1170	Kernel	Error
The Specified property set is not supported.%0\r\n	System	1170	Quartz	Warning
The point passed to GetMouseMovePoints is not in the buffer.\r\n	System	1171	Kernel	Error
The tracking (workstation) service is not running.\r\n	System	1172	Kernel	Error
The Volume ID could not be found.\r\n	System	1173	Kernel	Error
The specified Very Large Memory (64-bit) operation is invalid.\r\n	System	1174	Kernel	Error
Unable to remove the file to be replaced.\r\n	System	1175	Kernel	Error
Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.\r\n	System	1176	Kernel	Error
Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.\r\n	System	1177	Kernel	Error
The volume change journal is being deleted.\r\n	System	1178	Kernel	Error
The volume change journal service is not active.\r\n	System	1179	Kernel	Error
A file was found, but it may not be the correct file.\r\n	System	1180	Kernel	Error
The journal entry has been deleted from the journal.\r\n	System	1181	Kernel	Error
A thread in the directory is waiting in a remote procedure call (RPC) to\r\ndirectory %1 performing a(n) %3 operation.  The directory has attempted to\r\ncancel the call and recover thread id %2.  If this condition persists, stop\r\nand restart that Windo	System	1188	NTDS	Error
The specified device name is invalid.\r\n	System	1200	Kernel	Error
Security configuration cannot be backed up to security templates directory.\r\nInstead, it is backed up to %1.\r\n	Application	1200	SceCli	Warning
The certificate does not fulfill the intended usage requirements specified by the certificate template:\r\nCertificate: %1\r\nCertificate Template: %2\r\n\r\n	Application	1200	Winlogon	Warning
The device is not currently connected but it is a remembered connection.\r\n	System	1201	Kernel	Error
Default domain policy object cannot be created.\r\n%1\r\n	Application	1201	SceCli	Warning
The certificate does not fulfill the key usage requirements specified by the certificate template:\r\nCertificate: %1\r\nCertificate Template: %2\r\n\r\n	Application	1201	Winlogon	Warning
An attempt was made to remember a device that had previously been remembered.\r\n	System	1202	Kernel	Error
Security policies are propagated with warning.\r\n%1\r\n	Application	1202	SceCli	Warning
The certificate does not fulfill the basic constraints requirements specified by the certificate template:\r\nCertificate: %1\r\nCertificate Template: %2\r\n\r\n	Application	1202	Winlogon	Warning
No network provider accepted the given network path.\r\n	System	1203	Kernel	Error
Machine is assumed as a non-domain controller. Policy changes are saved in local database.\r\n%1\r\n	Application	1203	SceCli	Warning
The certificate does not contain the template name specified by the certificate template:\\n\r\nCertificate: %1\\n\r\nCertificate Template: %2\r\n\r\n	Application	1203	Winlogon	Warning
The specified network provider name is invalid.\r\n	System	1204	Kernel	Error
The certificate does not contain the any of the principal names specified for this user:\r\nPrincipal Name(s): %1\r\n\r\n	Application	1204	Winlogon	Warning
Unable to open the network connection profile.\r\n	System	1205	Kernel	Error
The subject name of this certificate does not contain the e-mail name for this user:\r\nUser e-mail name(s): %1\r\n\r\n	Application	1205	Winlogon	Warning
The network connection profile is corrupted.\r\n	System	1206	Kernel	Error
The alternate subject name of this certificate does not contain the e-mail name for this user:\r\nUser e-mail name(s): %1\r\n\r\n	Application	1206	Winlogon	Warning
Cannot enumerate a noncontainer.\r\n	System	1207	Kernel	Error
This certificate does not contain the e-mail name for this user:\r\nUser e-mail name(s): %1\r\n\r\n	Application	1207	Winlogon	Warning
An extended error has occurred.\r\n	System	1208	Kernel	Error
The certificate does not contain the DNS name of the machine:\r\nDNS Name(s): %1\r\n\r\n	Application	1208	Winlogon	Warning
The format of the specified group name is invalid.\r\n	System	1209	Kernel	Error
This certificate does not contain the Directory Name of the user or machine:\r\nDirectory Name(s): %1\r\n\r\n	Application	1209	Winlogon	Warning
The format of the specified computer name is invalid.\r\n	System	1210	Kernel	Error
This certificate does not contain the Active Directory object identifier of the user or machine.\r\n\r\n	Application	1210	Winlogon	Warning
The format of the specified event name is invalid.\r\n	System	1211	Kernel	Error
This certificate contains an Active Directory object identifier, but should not.\r\n\r\n	Application	1211	Winlogon	Warning
The format of the specified domain name is invalid.\r\n	System	1212	Kernel	Error
The certificate is no longer trusted for the following reason (%1) %2.\r\n\r\n	Application	1212	Winlogon	Warning
The format of the specified service name is invalid.\r\n	System	1213	Kernel	Error
The certificate's issuer is no longer allowed by the autoenrollment object.\r\n\r\n	Application	1213	Winlogon	Warning
The format of the specified network name is invalid.\r\n	System	1214	Kernel	Error
The certificate will expire soon.\r\n\r\n	Application	1214	Winlogon	Warning
The format of the specified share name is invalid.\r\n	System	1215	Kernel	Error
Subject Name:%1\r\n\r\n	Application	1215	Winlogon	Information
The format of the specified password is invalid.\r\n	System	1216	Kernel	Error
Alternate Subject Name:%1\r\n\r\n	Application	1216	Winlogon	Information
The format of the specified message name is invalid.\r\n	System	1217	Kernel	Error
The format of the specified message destination is invalid.\r\n	System	1218	Kernel	Error
The credentials supplied conflict with an existing set of credentials.\r\n	System	1219	Kernel	Error
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.\r\n	System	1220	Kernel	Error
LDAP over SSL will be unavailable at this time because the server was unable to obtain a certificate.\r\n	System	1220	NTDS	Information
The workgroup or domain name is already in use by another computer on the network.\r\n	System	1221	Kernel	Error
The network is not present or not started.\r\n	System	1222	Kernel	Error
The operation was canceled by the user.\r\n	System	1223	Kernel	Error
The requested operation cannot be performed on a file with a user-mapped section open.\r\n	System	1224	Kernel	Error
The remote system refused the network connection.\r\n	System	1225	Kernel	Error
The network connection was gracefully closed.\r\n	System	1226	Kernel	Error
The network transport endpoint already has an address associated with it.\r\n	System	1227	Kernel	Error
An address has not yet been associated with the network endpoint.\r\n	System	1228	Kernel	Error
An operation was attempted on a nonexistent network connection.\r\n	System	1229	Kernel	Error
An invalid operation was attempted on an active network connection.\r\n	System	1230	Kernel	Error
The network location cannot be reached. For information about network troubleshooting, see Windows Help.\r\n	System	1231	Kernel	Error
The network location cannot be reached. For information about network troubleshooting, see Windows Help.\r\n	System	1232	Kernel	Error
The network location cannot be reached. For information about network troubleshooting, see Windows Help.\r\n	System	1233	Kernel	Error
No service is operating at the destination network endpoint on the remote system.\r\n	System	1234	Kernel	Error
The request was aborted.\r\n	System	1235	Kernel	Error
The network connection was aborted by the local system.\r\n	System	1236	Kernel	Error
The operation could not be completed. A retry should be performed.\r\n	System	1237	Kernel	Error
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.\r\n	System	1238	Kernel	Error
Attempting to log in during an unauthorized time of day for this account.\r\n	System	1239	Kernel	Error
The account is not authorized to log in from this station.\r\n	System	1240	Kernel	Error
The network address could not be used for the operation requested.\r\n	System	1241	Kernel	Error
The service is already registered.\r\n	System	1242	Kernel	Error
The specified service does not exist.\r\n	System	1243	Kernel	Error
The operation being requested was not performed because the user has not been authenticated.\r\n	System	1244	Kernel	Error
The operation being requested was not performed because the user has not logged on to the network.\r\nThe specified service does not exist.\r\n	System	1245	Kernel	Error
Continue with work in progress.\r\n	System	1246	Kernel	Error
An attempt was made to perform an initialization operation when initialization has already been completed.\r\n	System	1247	Kernel	Error
No more local devices.\r\n	System	1248	Kernel	Error
The specified site does not exist.\r\n	System	1249	Kernel	Error
A domain controller with the specified name already exists.\r\n	System	1250	Kernel	Error
This operation is supported only when you are connected to the server.\r\n	System	1251	Kernel	Error
The group policy framework should call the extension even if there are no changes.\r\n	System	1252	Kernel	Error
The specified user does not have a valid profile.\r\n	System	1253	Kernel	Error
This operation is not supported on a Microsoft Small Business Server\r\n	System	1254	Kernel	Error
The attempt to establish a replication link with parameters%n\r\n%n\r\nPartition: %1%n\r\nSource DSA DN: %4%n\r\nSource DSA Address: %2%n\r\nInter-site Transport (if any): %5%n\r\n%n\r\nfailed with the following status:%n\r\n%n\r\n%3\r\n%n\r\nThe record d	System	1265	NTDS	Warning
Not all privileges referenced are assigned to the caller.\r\n	Security	1300	Security	Error
Some mapping between account names and security IDs was not done.\r\n	Security	1301	Security	Error
No system quota limits are specifically set for this account.\r\n	Security	1302	Security	Error
No encryption key is available. A well-known encryption key was returned.\r\n	Security	1303	Security	Error
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.\r\n	Security	1304	Security	Error
The revision level is unknown.\r\n	Security	1305	Security	Error
Indicates two revision levels are incompatible.\r\n	Security	1306	Security	Error
This security ID may not be assigned as the owner of this object.\r\n	Security	1307	Security	Error
This security ID may not be assigned as the primary group of an object.\r\n	Security	1308	Security	Error
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.\r\n	Security	1309	Security	Error
The group may not be disabled.\r\n	Security	1310	Security	Error
There are currently no logon servers available to service the logon request.\r\n	Security	1311	Security	Error
A specified logon session does not exist. It may already have been terminated.\r\n	Security	1312	Security	Error
A specified privilege does not exist.\r\n	Security	1313	Security	Error
A required privilege is not held by the client.\r\n	Security	1314	Security	Error
The name provided is not a properly formed account name.\r\n	Security	1315	Security	Error
The specified user already exists.\r\n	Security	1316	Security	Error
The specified user does not exist.\r\n	Security	1317	Security	Error
The specified group already exists.\r\n	Security	1318	Security	Error
The specified group does not exist.\r\n	Security	1319	Security	Error
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.\r\n	Security	1320	Security	Error
The specified user account is not a member of the specified group account.\r\n	Security	1321	Security	Error
The last remaining administration account cannot be disabled or deleted.\r\n	Security	1322	Security	Error
Unable to update the password. The value provided as the current password is incorrect.\r\n	Security	1323	Security	Error
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.\r\n	Security	1324	Security	Error
Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain.\r\n	Security	1325	Security	Error
Logon failure: unknown user name or bad password.\r\n	Security	1326	Security	Error
Logon failure: user account restriction.\r\n	Security	1327	Security	Error
Logon failure: account logon time restriction violation.\r\n	Security	1328	Security	Error
Logon failure: user not allowed to log on to this computer.\r\n	Security	1329	Security	Error
Logon failure: the specified account password has expired.\r\n	Security	1330	Security	Error
Logon failure: account currently disabled.\r\n	Security	1331	Security	Error
No mapping between account names and security IDs was done.\r\n	Security	1332	Security	Error
Too many local user identifiers (LUIDs) were requested at one time.\r\n	Security	1333	Security	Error
No more local user identifiers (LUIDs) are available.\r\n	Security	1334	Security	Error
The subauthority part of a security ID is invalid for this particular use.\r\n	Security	1335	Security	Error
The access control list (ACL) structure is invalid.\r\n	Security	1336	Security	Error
The security ID structure is invalid.\r\n	Security	1337	Security	Error
The security descriptor structure is invalid.\r\n	Security	1338	Security	Error
The inherited access control list (ACL) or access control entry (ACE) could not be built.\r\n	Security	1340	Security	Error
The server is currently disabled.\r\n	Security	1341	Security	Error
The server is currently enabled.\r\n	Security	1342	Security	Error
The value provided was an invalid value for an identifier authority.\r\n	Security	1343	Security	Error
No more memory is available for security information updates.\r\n	Security	1344	Security	Error
The specified attributes are invalid, or incompatible with the attributes for the group as a whole.\r\n	Security	1345	Security	Error
Either a required impersonation level was not provided, or the provided impersonation level is invalid.\r\n	Security	1346	Security	Error
Cannot open an anonymous level security token.\r\n	Security	1347	Security	Error
The validation information class requested was invalid.\r\n	Security	1348	Security	Error
The type of the token is inappropriate for its attempted use.\r\n	Security	1349	Security	Error
Unable to perform a security operation on an object that has no associated security.\r\n	Security	1350	Security	Error
Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.\r\n	Security	1351	Security	Error
The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.\r\n	Security	1352	Security	Error
The domain was in the wrong state to perform the security operation.\r\n	Security	1353	Security	Error
This operation is only allowed for the Primary Domain Controller of the domain.\r\n	Security	1354	Security	Error
The specified domain either does not exist or could not be contacted.\r\n	Security	1355	Security	Error
The specified domain already exists.\r\n	Security	1356	Security	Error
An attempt was made to exceed the limit on the number of domains per server.\r\n	Security	1357	Security	Error
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.\r\n	Security	1358	Security	Error
An internal error occurred.\r\n	Security	1359	Security	Error
Generic access types were contained in an access mask which should already be mapped to nongeneric types.\r\n	Security	1360	Security	Error
A security descriptor is not in the right format (absolute or self-relative).\r\n	Security	1361	Security	Error
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.\r\n	Security	1362	Security	Error
Cannot start a new logon session with an ID that is already in use.\r\n	Security	1363	Security	Error
A specified authentication package is unknown.\r\n	Security	1364	Security	Error
The logon session is not in a state that is consistent with the requested operation.\r\n	Security	1365	Security	Error
The logon session ID is already in use.\r\n	Security	1366	Security	Error
A logon request contained an invalid logon type value.\r\n	Security	1367	Security	Error
Unable to impersonate using a named pipe until data has been read from that pipe.\r\n	Security	1368	Security	Error
The transaction state of a registry subtree is incompatible with the requested operation.\r\n	Security	1369	Security	Error
An internal security database corruption has been encountered.\r\n	Security	1370	Security	Error
Cannot perform this operation on built-in accounts.\r\n	Security	1371	Security	Error
Cannot perform this operation on this built-in special group.\r\n	Security	1372	Security	Error
Cannot perform this operation on this built-in special user.\r\n	Security	1373	Security	Error
The user cannot be removed from a group because the group is currently the user's primary group.\r\n	Security	1374	Security	Error
The token is already in use as a primary token.\r\n	Security	1375	Security	Error
The specified local group does not exist.\r\n	Security	1376	Security	Error
The specified account name is not a member of the local group.\r\n	Security	1377	Security	Error
The specified account name is already a member of the local group.\r\n	Security	1378	Security	Error
The specified local group already exists.\r\n	Security	1379	Security	Error
Logon failure: the user has not been granted the requested logon type at this computer.\r\n	Security	1380	Security	Error
The maximum number of secrets that may be stored in a single system has been exceeded.\r\n	Security	1381	Security	Error
The length of a secret exceeds the maximum length allowed.\r\n	Security	1382	Security	Error
The local security authority database contains an internal inconsistency.\r\n	Security	1383	Security	Error
During a logon attempt, the user's security context accumulated too many security IDs.\r\n	Security	1384	Security	Error
Logon failure: the user has not been granted the requested logon type at this computer.\r\n	Security	1385	Security	Error
A cross-encrypted password is necessary to change a user password.\r\n	Security	1386	Security	Error
A member could not be added to or removed from the local group because the member does not exist.\r\n	Security	1387	Security	Error
A new member could not be added to a local group because the member has the wrong account type.\r\n	Security	1388	Security	Error
Too many security IDs have been specified.\r\n	Security	1389	Security	Error
A cross-encrypted password is necessary to change this user password.\r\n	Security	1390	Security	Error
Indicates an ACL contains no inheritable components.\r\n	Security	1391	Security	Error
The file or directory is corrupted and unreadable.\r\n	Security	1392	Security	Error
The disk structure is corrupted and unreadable.\r\n	Security	1393	Security	Error
There is no user session key for the specified logon session.\r\n	Security	1394	Security	Error
The service being accessed is licensed for a particular number of connections.\r\nNo more connections can be made to the service at this time because there are already as many connections as the service can accept.\r\n	Security	1395	Security	Error
Logon Failure: The target account name is incorrect.\r\n	Security	1396	Security	Error
Mutual Authentication failed. The server's password is out of date at the domain controller.\r\n	Security	1397	Security	Error
There is a time difference between the client and server.\r\n	Security	1398	Security	Error
Invalid window handle.\r\n	System	1400	Kernel	Error
Invalid menu handle.\r\n	System	1401	Kernel	Error
Invalid cursor handle.\r\n	System	1402	Kernel	Error
Invalid accelerator table handle.\r\n	System	1403	Kernel	Error
Invalid hook handle.\r\n	System	1404	Kernel	Error
Invalid handle to a multiple-window position structure.\r\n	System	1405	Kernel	Error
Cannot create a top-level child window.\r\n	System	1406	Kernel	Error
Cannot find window class.\r\n	System	1407	Kernel	Error
Invalid window; it belongs to other thread.\r\n	System	1408	Kernel	Error
Hot key is already registered.\r\n	System	1409	Kernel	Error
Class already exists.\r\n	System	1410	Kernel	Error
Class does not exist.\r\n	System	1411	Kernel	Error
Class still has open windows.\r\n	System	1412	Kernel	Error
Invalid index.\r\n	System	1413	Kernel	Error
Invalid icon handle.\r\n	System	1414	Kernel	Error
Using private DIALOG window words.\r\n	System	1415	Kernel	Error
The list box identifier was not found.\r\n	System	1416	Kernel	Error
No wildcards were found.\r\n	System	1417	Kernel	Error
Thread does not have a clipboard open.\r\n	System	1418	Kernel	Error
Hot key is not registered.\r\n	System	1419	Kernel	Error
This DC is both a Global Catalog and the Infrastructure Update master.  These two roles are incompatible.  If another machine exists in the domain, it should be made the Infrastructure Update master.  The machine %1 is a good candidate for this role.  If	System	1419	NTDS	Error
The window is not a valid dialog window.\r\n	System	1420	Kernel	Error
Control ID not found.\r\n	System	1421	Kernel	Error
Invalid message for a combo box because it does not have an edit control.\r\n	System	1422	Kernel	Error
The window is not a combo box.\r\n	System	1423	Kernel	Error
Height must be less than 256.\r\n	System	1424	Kernel	Error
Invalid device context (DC) handle.\r\n	System	1425	Kernel	Error
Invalid hook procedure type.\r\n	System	1426	Kernel	Error
Invalid hook procedure.\r\n	System	1427	Kernel	Error
Cannot set nonlocal hook without a module handle.\r\n	System	1428	Kernel	Error
This hook procedure can only be set globally.\r\n	System	1429	Kernel	Error
The journal hook procedure is already installed.\r\n	System	1430	Kernel	Error
The hook procedure is not installed.\r\n	System	1431	Kernel	Error
Invalid message for single-selection list box.\r\n	System	1432	Kernel	Error
LB_SETCOUNT sent to non-lazy list box.\r\n	System	1433	Kernel	Error
This list box does not support tab stops.\r\n	System	1434	Kernel	Error
Cannot destroy object created by another thread.\r\n	System	1435	Kernel	Error
Child windows cannot have menus.\r\n	System	1436	Kernel	Error
The window does not have a system menu.\r\n	System	1437	Kernel	Error
Invalid message box style.\r\n	System	1438	Kernel	Error
Invalid system-wide (SPI_*) parameter.\r\n	System	1439	Kernel	Error
Screen already locked.\r\n	System	1440	Kernel	Error
All handles to windows in a multiple-window position structure must have the same parent.\r\n	System	1441	Kernel	Error
The window is not a child window.\r\n	System	1442	Kernel	Error
Invalid GW_* command.\r\n	System	1443	Kernel	Error
Invalid thread identifier.\r\n	System	1444	Kernel	Error
Cannot process a message from a window that is not a multiple document interface (MDI) window.\r\n	System	1445	Kernel	Error
Popup menu already active.\r\n	System	1446	Kernel	Error
The window does not have scroll bars.\r\n	System	1447	Kernel	Error
Scroll bar range cannot be greater than 0x7FFF.\r\n	System	1448	Kernel	Error
Cannot show or remove the window in the way specified.\r\n	System	1449	Kernel	Error
Insufficient system resources exist to complete the requested service.\r\n	System	1450	Kernel	Error
Insufficient system resources exist to complete the requested service.\r\n	System	1451	Kernel	Error
Insufficient system resources exist to complete the requested service.\r\n	System	1452	Kernel	Error
Insufficient quota to complete the requested service.\r\n	System	1453	Kernel	Error
Insufficient quota to complete the requested service.\r\n	System	1454	Kernel	Error
The paging file is too small for this operation to complete.\r\n	System	1455	Kernel	Error
A menu item was not found.\r\n	System	1456	Kernel	Error
Invalid keyboard layout handle.\r\n	System	1457	Kernel	Error
Hook type not allowed.\r\n	System	1458	Kernel	Error
This operation requires an interactive window station.\r\n	System	1459	Kernel	Error
This operation returned because the timeout period expired.\r\n	System	1460	Kernel	Error
Invalid monitor handle.\r\n	System	1461	Kernel	Error
The attempt to remove an older version of the Directory Service performance\r\ncounters failed with the following error:%n\r\n%n\r\n%1\r\n%n\r\nThe record data is the status code.\r\n	System	1475	NTDS	Warning
The attempt to register the Directory Service performance counters failed with\r\nthe following error:%n\r\n%n\r\n%1\r\n%n\r\nThe record data is the status code.  This operation will be retried in %2\r\nminutes.\r\n	System	1476	NTDS	Warning
The event log file is corrupted.\r\n	System	1500	EventLog	Error
The SNMP Service encountered an error while accessing the registry key %1.\r\n	System	1500	SNMP	Error
Security configuration is backed up to %1.\r\n	Application	1500	SceCli	Success
No event log file could be opened, so the event logging service did not start.\r\n	System	1501	EventLog	Error
The SNMP Service encountered an error while setting up the incoming transports.\\n\r\nThe %1 transport has been dropped out.\r\n	System	1501	SNMP	Error
The event log file is full.\r\n	System	1502	EventLog	Error
The SNMP Service encountered an error while registering for registry notifications.\\n\r\nChanges in the service's configuration will not be considered.\r\n	System	1502	SNMP	Error
The event log file has changed between read operations.\r\n	System	1503	EventLog	Error
Unable to disable disk write cache on %1. Data might be lost during system failures.\r\n	System	1539	NTDS	Warning
Domain operation mode has been changed to Native Mode. The change cannot be reversed. \r\n	System	1573	NTDS	Information
The Windows Installer service could not be accessed.  Contact your support personnel to verify that the Windows Installer service is properly registered.\r\n	Application	1601	MSI	Error
User cancelled installation.\r\n	Application	1602	MSI	Error
Fatal error during installation.\r\n	Application	1603	MSI	Error
Installation suspended, incomplete.\r\n	Application	1604	MSI	Error
This action is only valid for products that are currently installed.\r\n	Application	1605	MSI	Error
Feature ID not registered.\r\n	Application	1606	MSI	Error
Component ID not registered.\r\n	Application	1607	MSI	Error
Unknown property.\r\n	Application	1608	MSI	Error
Handle is in an invalid state.\r\n	Application	1609	MSI	Error
The configuration data for this product is corrupt.  Contact your support personnel.\r\n	Application	1610	MSI	Error
Component qualifier not present.\r\n	Application	1611	MSI	Error
The installation source for this product is not available.  Verify that the source exists and that you can access it.\r\n	Application	1612	MSI	Error
This installation package cannot be installed by the Windows Installer service.  You must install a Windows service pack that contains a newer version of the Windows Installer service.\r\n	Application	1613	MSI	Error
Product is uninstalled.\r\n	Application	1614	MSI	Error
SQL query syntax invalid or unsupported.\r\n	Application	1615	MSI	Error
Record field does not exist.\r\n	Application	1616	MSI	Error
The device has been removed.\r\n	Application	1617	MSI	Error
Another installation is already in progress.  Complete that installation before proceeding with this install.\r\n	Application	1618	MSI	Error
This installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.\r\n	Application	1619	MSI	Error
This installation package could not be opened.  Contact the application vendor to verify that this is a valid Windows Installer package.\r\n	Application	1620	MSI	Error
There was an error starting the Windows Installer service user interface.  Contact your support personnel.\r\n	Application	1621	MSI	Error
Error opening installation log file. Verify that the specified log file location exists and that you can write to it.\r\n	Application	1622	MSI	Error
The language of this installation package is not supported by your system.\r\n	Application	1623	MSI	Error
Error applying transforms.  Verify that the specified transform paths are valid.\r\n	Application	1624	MSI	Error
This installation is forbidden by system policy.  Contact your system administrator.\r\n	Application	1625	MSI	Error
Function could not be executed.\r\n	Application	1626	MSI	Error
Function failed during execution.\r\n	Application	1627	MSI	Error
Invalid or unknown table specified.\r\n	Application	1628	MSI	Error
Data supplied is of wrong type.\r\n	Application	1629	MSI	Error
Data of this type is not supported.\r\n	Application	1630	MSI	Error
The Windows Installer service failed to start.  Contact your support personnel.\r\n	Application	1631	MSI	Error
The temp folder is either full or inaccessible.  Verify that the temp folder exists and that you can write to it.\r\n	Application	1632	MSI	Error
This installation package is not supported by this processor type. Contact your product vendor.\r\n	Application	1633	MSI	Error
Component not used on this computer.\r\n	Application	1634	MSI	Error
This patch package could not be opened.  Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.\r\n	Application	1635	MSI	Error
This patch package could not be opened.  Contact the application vendor to verify that this is a valid Windows Installer patch package.\r\n	Application	1636	MSI	Error
This patch package cannot be processed by the Windows Installer service.  You must install a Windows service pack that contains a newer version of the Windows Installer service.\r\n	Application	1637	MSI	Error
Another version of this product is already installed.  Installation of this version cannot continue.  To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.\r\n	Application	1638	MSI	Error
Invalid command line argument.  Consult the Windows Installer SDK for detailed command line help.\r\n	Application	1639	MSI	Error
Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.\r\n	Application	1640	MSI	Error
The requested operation completed successfully.  The system will be restarted so the changes can take effect.\r\n	Application	1641	MSI	Error
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer an	Application	1642	MSI	Error
The string binding is invalid.\r\n	System	1700	RPC	Error
A replica domain controller is promoted. No need to create domain policy object.\r\n	Application	1700	SceCli	Information
The binding handle is not the correct type.\r\n	System	1701	RPC	Error
%1 is registered to create default domain group policy objects.\r\n	Application	1701	SceCli	Information
The binding handle is invalid.\r\n	System	1702	RPC	Error
Account policy in GPO %1,if any, is ignored because account policy on domain controllers\r\ncan only be configured through domain level group policy objects.\r\n	Application	1702	SceCli	Information
The RPC protocol sequence is not supported.\r\n	System	1703	RPC	Error
No change has been made to the group policy objects since last propagation.\r\n	Application	1703	SceCli	Information
The RPC protocol sequence is invalid.\r\n	System	1704	RPC	Error
Security policy in the Group policy objects are applied successfully.\r\n	Application	1704	SceCli	Information
The string universal unique identifier (UUID) is invalid.\r\n	System	1705	RPC	Error
Process group policy objects.\r\n	Application	1705	SceCli	Information
The endpoint format is invalid.\r\n	System	1706	RPC	Error
The network address is invalid.\r\n	System	1707	RPC	Error
No endpoint was found.\r\n	System	1708	RPC	Error
The timeout value is invalid.\r\n	System	1709	RPC	Error
The object universal unique identifier (UUID) was not found.\r\n	System	1710	RPC	Error
The object universal unique identifier (UUID) has already been registered.\r\n	System	1711	RPC	Error
The type universal unique identifier (UUID) has already been registered.\r\n	System	1712	RPC	Error
The RPC server is already listening.\r\n	System	1713	RPC	Error
No protocol sequences have been registered.\r\n	System	1714	RPC	Error
The RPC server is not listening.\r\n	System	1715	RPC	Error
The manager type is unknown.\r\n	System	1716	RPC	Error
The interface is unknown.\r\n	System	1717	RPC	Error
There are no bindings.\r\n	System	1718	RPC	Error
There are no protocol sequences.\r\n	System	1719	RPC	Error
The endpoint cannot be created.\r\n	System	1720	RPC	Error
Not enough resources are available to complete this operation.\r\n	System	1721	RPC	Error
The RPC server is unavailable.\r\n	System	1722	RPC	Error
The RPC server is too busy to complete this operation.\r\n	System	1723	RPC	Error
The network options are invalid.\r\n	System	1724	RPC	Error
There are no remote procedure calls active on this thread.\r\n	System	1725	RPC	Error
The remote procedure call failed.\r\n	System	1726	RPC	Error
The remote procedure call failed and did not execute.\r\n	System	1727	RPC	Error
A remote procedure call (RPC) protocol error occurred.\r\n	System	1728	RPC	Error
The transfer syntax is not supported by the RPC server.\r\n	System	1730	RPC	Error
The universal unique identifier (UUID) type is not supported.\r\n	System	1732	RPC	Error
The tag is invalid.\r\n	System	1733	RPC	Error
The array bounds are invalid.\r\n	System	1734	RPC	Error
The binding does not contain an entry name.\r\n	System	1735	RPC	Error
The name syntax is invalid.\r\n	System	1736	RPC	Error
The name syntax is not supported.\r\n	System	1737	RPC	Error
No network address is available to use to construct a universal unique identifier (UUID).\r\n	System	1739	RPC	Error
The endpoint is a duplicate.\r\n	System	1740	RPC	Error
The authentication type is unknown.\r\n	System	1741	RPC	Error
The maximum number of calls is too small.\r\n	System	1742	RPC	Error
The string is too long.\r\n	System	1743	RPC	Error
The RPC protocol sequence was not found.\r\n	System	1744	RPC	Error
The procedure number is out of range.\r\n	System	1745	RPC	Error
The binding does not contain any authentication information.\r\n	System	1746	RPC	Error
The authentication service is unknown.\r\n	System	1747	RPC	Error
The authentication level is unknown.\r\n	System	1748	RPC	Error
The security context is invalid.\r\n	System	1749	RPC	Error
The authorization service is unknown.\r\n	System	1750	RPC	Error
The entry is invalid.\r\n	System	1751	RPC	Error
The server endpoint cannot perform the operation.\r\n	System	1752	RPC	Error
There are no more endpoints available from the endpoint mapper.\r\n	System	1753	RPC	Error
No interfaces have been exported.\r\n	System	1754	RPC	Error
The entry name is incomplete.\r\n	System	1755	RPC	Error
The version option is invalid.\r\n	System	1756	RPC	Error
There are no more members.\r\n	System	1757	RPC	Error
There is nothing to unexport.\r\n	System	1758	RPC	Error
The interface was not found.\r\n	System	1759	RPC	Error
The entry already exists.\r\n	System	1760	RPC	Error
The entry is not found.\r\n	System	1761	RPC	Error
The name service is unavailable.\r\n	System	1762	RPC	Error
The network address family is invalid.\r\n	System	1763	RPC	Error
The requested operation is not supported.\r\n	System	1764	RPC	Error
No security context is available to allow impersonation.\r\n	System	1765	RPC	Error
An internal error occurred in a remote procedure call (RPC).\r\n	System	1766	RPC	Error
The RPC server attempted an integer division by zero.\r\n	System	1767	RPC	Error
An addressing error occurred in the RPC server.\r\n	System	1768	RPC	Error
A floating-point operation at the RPC server caused a division by zero.\r\n	System	1769	RPC	Error
A floating-point underflow occurred at the RPC server.\r\n	System	1770	RPC	Error
A floating-point overflow occurred at the RPC server.\r\n	System	1771	RPC	Error
The list of RPC servers available for the binding of auto handles has been exhausted.\r\n	System	1772	RPC	Error
Unable to open the character translation table file.\r\n	System	1773	RPC	Error
The file containing the character translation table has fewer than 512 bytes.\r\n	System	1774	RPC	Error
A null context handle was passed from the client to the host during a remote procedure call.\r\n	System	1775	RPC	Error
The context handle changed during a remote procedure call.\r\n	System	1777	RPC	Error
The binding handles passed to a remote procedure call do not match.\r\n	System	1778	RPC	Error
The stub is unable to get the remote procedure call handle.\r\n	System	1779	RPC	Error
A null reference pointer was passed to the stub.\r\n	System	1780	RPC	Error
The enumeration value is out of range.\r\n	System	1781	RPC	Error
The byte count is too small.\r\n	System	1782	RPC	Error
The stub received bad data.\r\n	System	1783	RPC	Error
The supplied user buffer is not valid for the requested operation.\r\n	System	1784	RPC	Error
The disk media is not recognized. It may not be formatted.\r\n	System	1785	RPC	Error
The workstation does not have a trust secret.\r\n	System	1786	RPC	Error
The security database on the server does not have a computer account for this workstation trust relationship.\r\n	System	1787	RPC	Error
The trust relationship between the primary domain and the trusted domain failed.\r\n	System	1788	RPC	Error
The trust relationship between this workstation and the primary domain failed.\r\n	System	1789	RPC	Error
The network logon failed.\r\n	System	1790	RPC	Error
A remote procedure call is already in progress for this thread.\r\n	System	1791	RPC	Error
An attempt was made to logon, but the network logon service was not started.\r\n	System	1792	RPC	Error
The user's account has expired.\r\n	System	1793	RPC	Error
The redirector is in use and cannot be unloaded.\r\n	System	1794	RPC	Error
The specified printer driver is already installed.\r\n	System	1795	RPC	Error
The specified port is unknown.\r\n	System	1796	RPC	Error
The printer driver is unknown.\r\n	System	1797	RPC	Error
The print processor is unknown.\r\n	System	1798	RPC	Error
The specified separator file is invalid.\r\n	System	1799	RPC	Error
The specified priority is invalid.\r\n	System	1800	RPC	Error
The printer name is invalid.\r\n	System	1801	RPC	Error
The printer already exists.\r\n	System	1802	RPC	Error
The printer command is invalid.\r\n	System	1803	RPC	Error
The specified datatype is invalid.\r\n	System	1804	RPC	Error
The environment specified is invalid.\r\n	System	1805	RPC	Error
There are no more bindings.\r\n	System	1806	RPC	Error
The account used is an interdomain trust account. Use your global user account or local user account to access this server.\r\n	System	1807	RPC	Error
The account used is a computer account. Use your global user account or local user account to access this server.\r\n	System	1808	RPC	Error
The account used is a server trust account. Use your global user account or local user account to access this server.\r\n	System	1809	RPC	Error
The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.\r\n	System	1810	RPC	Error
The server is in use and cannot be unloaded.\r\n	System	1811	RPC	Error
The specified image file did not contain a resource section.\r\n	System	1812	RPC	Error
The specified resource type cannot be found in the image file.\r\n	System	1813	RPC	Error
The specified resource name cannot be found in the image file.\r\n	System	1814	RPC	Error
The specified resource language ID cannot be found in the image file.\r\n	System	1815	RPC	Error
Not enough quota is available to process this command.\r\n	System	1816	RPC	Error
No interfaces have been registered.\r\n	System	1817	RPC	Error
The remote procedure call was cancelled.\r\n	System	1818	RPC	Error
The binding handle does not contain all required information.\r\n	System	1819	RPC	Error
A communications failure occurred during a remote procedure call.\r\n	System	1820	RPC	Error
The requested authentication level is not supported.\r\n	System	1821	RPC	Error
No principal name registered.\r\n	System	1822	RPC	Error
The error specified is not a valid Windows RPC error code.\r\n	System	1823	RPC	Error
A UUID that is valid only on this computer has been allocated.\r\n	System	1824	RPC	Error
A security package specific error occurred.\r\n	System	1825	RPC	Error
Thread is not canceled.\r\n	System	1826	RPC	Error
Invalid operation on the encoding/decoding handle.\r\n	System	1827	RPC	Error
Incompatible version of the serializing package.\r\n	System	1828	RPC	Error
Incompatible version of the RPC stub.\r\n	System	1829	RPC	Error
The RPC pipe object is invalid or corrupted.\r\n	System	1830	RPC	Error
An invalid operation was attempted on an RPC pipe object.\r\n	System	1831	RPC	Error
Unsupported RPC pipe version.\r\n	System	1832	RPC	Error
The group member was not found.\r\n	System	1898	RPC	Error
The endpoint mapper database entry could not be created.\r\n	System	1899	RPC	Error
The object universal unique identifier (UUID) is the nil UUID.\r\n	System	1900	RPC	Error
An extensible counter has opened the Event Log for PERFCTRS.DLL\r\n	Application	1900	Perfctrs	Information
An extensible counter has opened the Event Log for RASCTRS.DLL\r\n	Application	1900	Rasctrs	Information
An extensible counter has opened the Event Log for SFMCTRS.DLL\r\n	Application	1900	sfmctrs	Information
An extensible counter has opened the Event Log for ATKCTRS.DLL\r\n	Application	1900	Atkctrs	Information
The specified time is invalid.\r\n	System	1901	RPC	Error
The specified form name is invalid.\r\n	System	1902	RPC	Error
The specified form size is invalid.\r\n	System	1903	RPC	Error
The specified printer handle is already being waited on\r\n	System	1904	RPC	Error
The specified printer has been deleted.\r\n	System	1905	RPC	Error
The state of the printer is invalid.\r\n	System	1906	RPC	Error
The user's password must be changed before logging on the first time.\r\n	System	1907	RPC	Error
Could not find the domain controller for this domain.\r\n	System	1908	RPC	Error
The referenced account is currently locked out and may not be logged on to.\r\n	System	1909	RPC	Error
The object exporter specified was not found.\r\n	System	1910	RPC	Error
The object specified was not found.\r\n	System	1911	RPC	Error
The object resolver set specified was not found.\r\n	System	1912	RPC	Error
Some data remains to be sent in the request buffer.\r\n	System	1913	RPC	Error
Invalid asynchronous remote procedure call handle.\r\n	System	1914	RPC	Error
Invalid asynchronous RPC call handle for this operation.\r\n	System	1915	RPC	Error
The RPC pipe object has already been closed.\r\n	System	1916	RPC	Error
The RPC call completed before all pipes were processed.\r\n	System	1917	RPC	Error
No more data is available from the RPC pipe.\r\n	System	1918	RPC	Error
No site name is available for this machine.\r\n	System	1919	RPC	Error
The file can not be accessed by the system.\r\n	System	1920	RPC	Error
The name of the file cannot be resolved by the system.\r\n	System	1921	RPC	Error
The entry is not of the expected type.\r\n	System	1922	RPC	Error
Not all object UUIDs could be exported to the specified entry.\r\n	System	1923	RPC	Error
Interface could not be exported to the specified entry.\r\n	System	1924	RPC	Error
The specified profile entry could not be added.\r\n	System	1925	RPC	Error
The specified profile element could not be added.\r\n	System	1926	RPC	Error
The specified profile element could not be removed.\r\n	System	1927	RPC	Error
The group element could not be added.\r\n	System	1928	RPC	Error
The group element could not be removed.\r\n	System	1929	RPC	Error
An extensible counter has closed the Event Log for PERFCTRS.DLL\r\n	Application	1999	Perfctrs	Information
An extensible counter has closed the Event Log for RASCTRS.DLL\r\n	Application	1999	Rasctrs	Information
An extensible counter has closed the Event Log for SFMCTRS.DLL\r\n	Application	1999	sfmctrs	Information
An extensible counter has closed the Event Log for ATKCTRS.DLL\r\n	Application	1999	Atkctrs	Information
Error creating the stop extension agent event.\r\nReturn code from CreateEvent is %1.\r\n	Application	2000	EvntAgnt	Error
Unable to initialize the service. Win32 error code returned is in the data.\r\n	System	2000	SysMon	Error
The pixel format is invalid.\r\n	System	2000	OpenGL	Error
No object list was found in the installation file. Adding an object \r\nlist to the installation file will \r\nimprove performance of the system when measuring performance counters.\r\n	Application	2000	LoadPerf	Warning
The server's call to a system service failed unexpectedly.\r\n	System	2000	Srv	Error
Unable to open driver containing SFM file server performance data.\r\n  To view the MacFile counters from Perfmon.exe, make sure the MacFile service has been started.\r\n	Application	2000	sfmctrs	Error
Not used\r\nThe AppleTalk Print Monitor has started.\r\n	System	2000	MacPrint	Information
Unable to connect to specified machine or machine is off line.\r\n	System	2000	PDH	Warning
OpenTDIPerformanceData routine entered.\r\n	Application	2000	Perfctrs	Information
Unable to open device driver containing RAS performance data.\r\n	Application	2000	Rasctrs	Error
Unable to open driver containing Appletalk performance data.\r\n  To view the AppleTalk counters from Perfmon.exe, make sure the Appletalk driver has been started.\r\n	Application	2000	Atkctrs	Error
Not used\r\nThe MacPrint Service has started.\r\n	System	2000	MacPrint	Information
Error creating the stop log processing routine termination event.\r\nReturn code from CreateEvent is %1.\r\n	Application	2001	EvntAgnt	Error
Unable to register the Service Control Handler function. Win32 error code returned\r\nis in the data.\r\n	System	2001	SysMon	Error
The specified driver is invalid.\r\n	System	2001	OpenGL	Error
The server was unable to perform an operation due to a shortage of available resources.\r\n	System	2001	Srv	Error
Unable to perform ioctl to device driver containing SFM performance data.\r\n  To view the MacFile counters from Perfmon.exe, make sure the MacFile service has been started.\r\n	Application	2001	sfmctrs	Error
An attempt was made to send a print job to an AppleTalk printer while\r\nthe AppleTalk Protocol device was stopped.  \r\n	System	2001	MacPrint	Warning
Unable to open TDI device for RW access. Returning IO Status Block in Data.\r\n	Application	2001	Perfctrs	Error
The specified instance is not present.\r\n	System	2001	PDH	Warning
Unable to perform ioctl to device driver containing RAS performance data.\r\n	Application	2001	Rasctrs	Error
Not used\r\nThe MacPrint Service has stopped.\r\n	System	2001	MacPrint	Information
Unable to perform ioctl to device driver containing Appletalk performance data.\r\n  To view the Appletalk counters from Perfmon.exe, make sure the Appletalk driver has been started.\r\n	Application	2001	Atkctrs	Error
Error creating the log event notification event.\r\nReturn code from CreateEvent is %1.\r\n	Application	2002	EvntAgnt	Error
Unable to create the configuration event. Win32 error code returned is in the data.\r\n	System	2002	SysMon	Error
The window style or class attribute is invalid for this operation.\r\n	System	2002	OpenGL	Error
Unable to allocate a system resource required for the MacPrint Service.\r\n	System	2002	MacPrint	Error
The server could not create its device.  The server could not be started.\r\n	System	2002	Srv	Error
Unable open &quot;Performance&quot; key of SFM driver in registy. Status code is returned in data.\r\n	Application	2002	sfmctrs	Error
Not used\r\nThe printer returned the following status message when an attempt was made\r\nto print a job: %1\r\n	System	2002	MacPrint	Warning
Opened TDI device for RW access.\r\n	Application	2002	Perfctrs	Error
There is more data to return than would fit in the supplied buffer. Allocate\r\na larger buffer and call the function again.\r\n	System	2002	PDH	Warning
Unable open &quot;Performance&quot; key of RAS driver in registy. Status code is returned in data.\r\n	Application	2002	Rasctrs	Error
Unable open &quot;Performance&quot; key of Appletalk driver in registry. Status code is returned in data.\r\n	Application	2002	Atkctrs	Error
Error creating the registry key change notify event.\r\nReturn code from CreateEvent is %1.\r\nInitialization will continue, but registry changes will not be updated until SNMP is stopped and restarted.\r\n	Application	2003	EvntAgnt	Warning
Unable to open the Performance Logs and Alerts configuration.\r\nThis configuration is initialized when you use the Performance\r\nLogs and Alerts Management Console snapin to create a Log or\r\nAlert session.\r\n	System	2003	SysMon	Error
The requested metafile operation is not supported.\r\n	System	2003	OpenGL	Error
The MacPrint service could not register with the Windows 2000 Service Controller.\r\nMacPrint service will be stopped.\r\n	System	2003	MacPrint	Error
The server could not create a process.  The server could not be started.\r\n	System	2003	Srv	Error
Unable to read the &quot;First Counter&quot; value under the MacSrv\\Performance Key. Status codes returned in data.\r\n	Application	2003	sfmctrs	Error
Not used\r\nThe printer %1 cannot be found on the AppleTalk network.  The print job has\r\nbeen deleted.\r\n	System	2003	MacPrint	Warning
Unable to allocate memory for TDI Information block. Close one or more applications and retry.\r\n	Application	2003	Perfctrs	Error
The data item has been added to the query, but has not been validated nor \r\naccessed. No other status information on this data item is available.\r\n	System	2003	PDH	Warning
Unable to read the &quot;First Counter&quot; value under the Remote Access\\Performance Key. Status codes retuened in data.\r\n	Application	2003	Rasctrs	Error
Unable to read the &quot;First Counter&quot; value under the AppleTalk\\Performance Key. Status codes returned in data.\r\n	Application	2003	Atkctrs	Error
RegNotifyChangeKeyValue failed with a return code of %1.\r\nInitialization will continue, but registry changes will not be updated until SNMP is stopped and restarted.\r\n	Application	2004	EvntAgnt	Information
The requested transformation operation is not supported.\r\n	System	2004	OpenGL	Error
The MacPrint Service does not have access to the Registry.\r\nUse the Registry Editor to ensure that the MacPrint account has full\r\naccess to the MacPrint service key and all its subkeys.\r\n	System	2004	MacPrint	Error
The server could not create a startup thread.  The server could not be started.\r\n	System	2004	Srv	Error
Unable to read the &quot;First Help&quot; value under the MacSrv\\Performance Key. Status codes returned in data.\r\n	Application	2004	sfmctrs	Error
Not used\r\nThere was a communication problem with the printer %1. The print job has\r\nbeen deleted.\r\n	System	2004	MacPrint	Warning
Error requesting data from Device IO Control. Returning IO Status Block.\r\n	Application	2004	Perfctrs	Error
The service was unable to open the log file: %1 for log %2 and will be stopped.\r\nCheck the log folder for existence, spelling and permissions or reenter\r\nthe log file name using the configuration program.\r\nThis log will not be started.\r\nThe error	System	2004	SysMon	Warning
The selected operation should be retried.\r\n	System	2004	PDH	Warning
Unable to read the &quot;First Help&quot; value under the Remote Access\\Performance Key. Status codes retuened in data.\r\n	Application	2004	Rasctrs	Error
Unable to read the &quot;First Help&quot; value under the AppleTalk\\Performance Key. Status codes returned in data.\r\n	Application	2004	Atkctrs	Error
Error creating the log processing routine service thread.\r\nReturn code from CreateThread is %1.\r\n	Application	2005	EvntAgnt	Error
The requested clipping operation is not supported.\r\n	System	2005	OpenGL	Error
The MacPrint Service was unable to access its Registry key (SYSTEM\\CurrentControlSet\\Services\\MacPrint\\Parameters).\r\nMacPrint service was started without using registry parameters.\r\n	System	2005	MacPrint	Error
The server received an unexpected disconnection from a client.\r\n	System	2005	Srv	Error
Unable to intialize Windows Sockets for AppleTalk protocol. Ensure that AppleTalk is correctly configured.\r\n	System	2005	MacPrint	Error
Unable to read data from the TDI device.\r\n	Application	2005	Perfctrs	Error
Unable to read the configuration of the %1 log or alert.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2005	SysMon	Warning
No data to return.\r\n	System	2005	PDH	Warning
Unable to create port information table. Status codes returned in data.\r\n	Application	2005	Rasctrs	Error
Error closing the stop agent event handle %1.\r\nReturn code from CloseHandle is %2.\r\n	Application	2006	EvntAgnt	Warning
Unable to allocate memory.  Use the System icon in Control Panel\r\nto increase the size of the Windows 2000 virtual memory specified in the \r\nPerformance options.\r\n	System	2006	MacPrint	Error
The server received an incorrectly formatted request from %2.\r\n	System	2006	Srv	Error
An error was reported while attempting to initialize the monitor with the \r\nlist of port information from the registry. \r\nThe information is located in the key \r\nSYSTEM\\CurrentControlSet\\Control\\Print\\Monitors\\AppleTalk Printing Devices\r\nThe	System	2006	MacPrint	Error
Data received from Device IO Control. Returning IO Status Block.\r\n	Application	2006	Perfctrs	Error
Unable to read the %1 value of the %2 log or alert configuration.\r\nThe default value will be used.\r\nThe error code returned is in the data.\r\n	System	2006	SysMon	Warning
A counter with a negative denominator value was detected.\r\n	System	2006	PDH	Warning
Unable to allocate enough memory.  Status codes returned in data.\r\n	Application	2006	Rasctrs	Error
Error closing the stop log processing routine event handle %1.\r\nReturn code from CloseHandle is %2.\r\n	Application	2007	EvntAgnt	Warning
Unable to create or open the file %1.\r\n	System	2007	MacPrint	Error
The server could not open the named pipe file system.  Remote named pipes are disabled.\r\n	System	2007	Srv	Error
Unable to allocate memory for TDI Statistics block. Close one or more applications and retry.\r\n	Application	2007	Perfctrs	Error
Unable to read the %1 value of the %2 log or alert configuration.\r\nAn error occurred while trying to allocate memory for the default value.\r\nThe error code returned is in the data.\r\n	System	2007	SysMon	Warning
A counter with a negative timebase value was detected.\r\n	System	2007	PDH	Warning
Unable to obtain Ras Statistics\r\n	Application	2007	Rasctrs	Error
Error closing the registry key changed event handle %1.\r\nReturn code from CloseHandle is %2.\r\n	Application	2008	EvntAgnt	Warning
Unable to read the %1 value of the %2 log or alert configuration.\r\nNo default value provided.\r\nThe error code returned is in the data.\r\n	System	2008	SysMon	Warning
A counter with a negative value was detected.\r\n	System	2008	PDH	Warning
RasPortEnum failed.\r\n	Application	2008	Rasctrs	Error
MacPrint is using the log file %1.\r\n	System	2008	MacPrint	Information
Error closing the registry Parameter key handle %1.\r\nReturn code from RegCloseKey is %2.\r\n	Application	2009	EvntAgnt	Warning
The Windows 2000 Print System is not responding.\r\nMacPrint Service is stopping.\r\n	System	2009	MacPrint	Error
The server could not expand a table because the table reached the maximum size.\r\n	System	2009	Srv	Error
Log Type for the %1 log or alert configuration has invalid value.\r\nThis log or alert will not be started.\r\nThe invalid value is in the data.\r\n	System	2009	SysMon	Warning
The user cancelled the dialog box.\r\n	System	2009	PDH	Warning
Error closing the stop log processing routine thread handle %1.\r\nReturn code from CloseHandle is %2.\r\n	Application	2010	EvntAgnt	Warning
The specified color management module is invalid.\r\n	System	2010	Image Color Mgmt	Error
The server could not start the scavenger thread.  The server could not be started.\r\n	System	2010	Srv	Error
An error occurred while trying to allocate memory for or read the command\r\nfilename to be executed by the %1 log or alert. The log or alert will continue, but no\r\ncommand file will be executed.\r\n	System	2010	SysMon	Warning
The printer %1 is now available to the AppleTalk network.\r\n	System	2010	MacPrint	Information
Error waiting for extension agent shutdown request event %1.\r\nReturn code from WaitForSingleObject is %2.\r\nExtension agent did not initialize.\r\n	Application	2011	EvntAgnt	Error
The specified color profile is invalid.\r\n	System	2011	Image Color Mgmt	Error
The server's configuration parameter &quot;irpstacksize&quot; is too small for the server to use a local device.  Please increase the value of this parameter.\r\n	System	2011	Srv	Error
The printer %1 has been removed from the AppleTalk network.\r\n	System	2011	MacPrint	Information
Unable to read the Last Modified value of the %1 log or alert configuration.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2011	SysMon	Warning
Error setting the extension agent shutdown event %1.\r\nReturn code from SetEvent is %2.\r\n	Application	2012	EvntAgnt	Error
The specified tag was not found.\r\n	System	2012	Image Color Mgmt	Error
The server has encountered a network error.\r\n	System	2012	Srv	Error
Not used\r\nThe Windows 2000 Print System has rejected a print job from a Macintosh\r\nworkstation.\r\n	System	2012	MacPrint	Warning
Unable to allocate a data block for the %1 log or alert configuration.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2012	SysMon	Warning
Error setting the log processing routine shutdown event %1.\r\nReturn code from SetEvent is %2.\r\n	Application	2013	EvntAgnt	Error
A required tag is not present.\r\n	System	2013	Image Color Mgmt	Error
The %2 disk is at or near capacity.  You may need to delete some files.\r\n	System	2013	Srv	Error
Not used\r\nAn error occurred sending a print job to the Windows 2000 Print System.\r\nThe print job has been canceled.\r\n	System	2013	MacPrint	Warning
Unable to start the thread for the %1 log or alert configuration.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2013	SysMon	Warning
Error terminating the log processing routine %1.\r\nReturn code from TerminateThread is %2.\r\n	Application	2014	EvntAgnt	Error
The specified tag is already present.\r\n	System	2014	Image Color Mgmt	Error
Not used\r\nAn error occurred on the AppleTalk network, which made a Windows 2000\r\nprinter no longer available to Macintosh users. Try stopping and \r\nrestarting the Appletalk service.\r\n	System	2014	MacPrint	Error
Unable to start the trace session for the %1 trace log configuration.\r\nOnly one instance of each trace provider can be enabled at any given time.\r\n	System	2014	SysMon	Warning
Error waiting for the log processing routine thread %1 to terminate.\r\nReturn code from WaitForSingleObject is %2.\r\n	Application	2015	EvntAgnt	Warning
The specified color profile is not associated with any device.\r\n	System	2015	Image Color Mgmt	Error
Not used\r\nAn error occurred on the AppleTalk network, which caused a Macintosh print\r\njob to be canceled. Unbind and rebind AppleTalk Protocol on the concerned\r\nadapter.\r\n	System	2015	MacPrint	Warning
Unable to enable any trace providers for the %1 trace log configuration.\r\nThis log will not be started.\r\n	System	2015	SysMon	Warning
The log processing routine thread %1 failed to terminate within 30 seconds.\r\nThread will be terminated.\r\n	Application	2016	EvntAgnt	Warning
Unable to enable trace provider %1 for the %2 trace log configuration.\r\nOnly one instance of each trace provider can be enabled at any given time.\r\nThe error code returned is in the data.\r\n	System	2016	SysMon	Warning
The specified color profile was not found.\r\n	System	2016	Image Color Mgmt	Error
The server was unable to allocate virtual memory.\r\n	System	2016	Srv	Error
Not used\r\nThe print job was canceled because it was not generated using the\r\nstandard LaserWriter driver. The print job must conform  to the\r\nAdobe's Document Structuring Conventions Version 2.0, available\r\nwhen the LaserWriter driver is used.\r\n	System	2016	MacPrint	Warning
Unable to load file name in EventMessageFile for %1. LoadLibraryEx returned %2.\r\nTrap will not be sent.\r\n	Application	2016	EvntAgnt	Warning
Unable to start the trace session for the %1 trace log configuration.\r\nAnother trace session for this provider is currently enabled.\r\nOnly one instance of each trace provider can be enabled at any given time.\r\n	System	2017	SysMon	Warning
The specified color space is invalid.\r\n	System	2017	Image Color Mgmt	Error
A Macintosh workstation has submitted a job using a version of the\r\nLaserWriter driver that is not supported. This workstation should\r\nbe upgraded to Apple system software version 7.5.1 or above.\r\n	System	2017	MacPrint	Warning
The server was unable to allocate from the system nonpaged pool because the server reached the configured limit for nonpaged pool allocations.\r\n	System	2017	Srv	Error
An unknown value %2 was returned while waiting for log processing routine thread %1 termination.\r\nThread state is unknown.\r\n	Application	2017	EvntAgnt	Warning
SNMP Event Log Extension Agent is starting.\r\n	Application	2018	EvntAgnt	Information
The server was unable to allocate from the system paged pool because the server reached the configured limit for paged pool allocations.\r\n	System	2018	Srv	Error
Unable to create the exit event for the %1 log or alert configuration.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2018	SysMon	Warning
Image Color Management is not enabled.\r\n	System	2018	Image Color Mgmt	Error
A Macintosh workstation submitted a job with Adobe Document Structuring\r\nConvention (newer than v2.0) comments that could not be processed.  \r\nThe job from %1 was canceled.\r\n	System	2018	MacPrint	Warning
The server was unable to allocate from the system nonpaged pool because the pool was empty.\r\n	System	2019	Srv	Error
SNMP Event Log Extension Agent did not initialize correctly.\r\n	Application	2019	EvntAgnt	Error
Unable to start the thread for the %1 log or alert configuration.\r\nThe maximum number of active logs and alerts has been reached.\r\nRestart the log or alert when fewer logs and alerts are active.\r\n	System	2019	SysMon	Warning
There was an error while deleting the color transform.\r\n	System	2019	Image Color Mgmt	Error
An internal error occurred while MacPrint service was trying to log an event. \r\nThe error returned was: %1\r\n	System	2019	MacPrint	Warning
SNMP Event Log Extension Agent has terminated.\r\n	Application	2020	EvntAgnt	Information
The server was unable to allocate from the system paged pool because the pool was empty.\r\n	System	2020	Srv	Error
Unable to read the list of counters from the %1 log or alert configuration.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2020	SysMon	Warning
The specified color transform is invalid.\r\n	System	2020	Image Color Mgmt	Error
status: Spooling to print server "%1" ...\r\n	System	2020	MacPrint	Information
Unable to read the list of trace providers to log for the %1 trace log configuration.\r\nThis log will not be started.\r\nThe error code returned is in the data.\r\n	System	2021	SysMon	Warning
The specified transform does not match the bitmap's color space.\r\n	System	2021	Image Color Mgmt	Error
The server was unable to allocate a work item %2 times in the last %3 seconds.\r\n	System	2021	Srv	Warning
An unexpected error was encountered.  \r\nThe errorcode is in the data.\r\n	System	2021	MacPrint	Information
Unable to allocate the memory for the counter list of the %1 log or alert configuration. \r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2022	SysMon	Warning
The specified named color index is not present in the profile.\r\n	System	2022	Image Color Mgmt	Error
The server was unable to find a free connection %2 times in the last %3 seconds.\r\n	System	2022	Srv	Warning
The server was unable to find a free raw work item %2 times in the last %3 seconds.\r\n	System	2023	Srv	Warning
Log %1 has been started or restarted and is logging data to file %2.\r\n	System	2023	SysMon	Information
The server was unable to allocate resources for blocking I/O %2 times in the last %3 seconds.\r\n	System	2024	Srv	Warning
Log %1, logging data to file %2, has been stopped.\r\n	System	2024	SysMon	Information
An error occurred while trying to update the log file with the current data\r\nfor the %1 log session.  This log session will be stopped.\r\nThe Pdh error returned is : %2.\r\n	System	2026	SysMon	Warning
An error occurred while trying to reset the current state of the %1 log or alert to Stopped.\r\nThe service will continue, but the configuration of that log or alert might\r\nbe incorrect.\r\n	System	2027	SysMon	Warning
An error occurred while trying to reset the current manual start state\r\nof the %1 log or alert to match its current stopped state.  The service\r\nwill continue, but the configuration of that log or alert might be incorrect.\r\n	System	2028	SysMon	Warning
The service was unable to add the counter '%1' to the %2 log or alert.  This log or alert\r\nwill continue, but data for that counter will not be collected.\r\nThe error returned is: %3.\r\n	System	2029	SysMon	Warning
The service was unable to add any counters to the %1 log or alert.  \r\nThis log or alert will not be started.\r\n	System	2030	SysMon	Warning
The service was unable to parse the alert info for the %2 alert so this counter\r\nwill not be monitored.\r\nThe path string in error is: %1\r\n	System	2031	SysMon	Warning
Counter: %1 has tripped its alert threshold. The counter value of %2 is %3 the limit\r\nvalue of %4.\r\n	System	2032	SysMon	Information
An error occurred while trying to reset the current manual stop state\r\nof the %1 log or alert to match the its current stopped state.  The service\r\nwill continue, but the configuration of that log or alert might be incorrect.\r\n	System	2033	SysMon	Warning
Unable to create the reconfigure event for the %1 log or alert configuration.\r\nThis log or alert will not be started.\r\nThe error code returned is in the data.\r\n	System	2034	SysMon	Warning
An error occurred while trying to collect data for the %1 alert scan.\r\nThe service will continue, but that alert scan will be stopped.\r\nThe error returned is: %2.\r\n	System	2035	SysMon	Warning
The addition of counter '%1' to the %2 log or alert generated a warning.\r\nData for that counter might not be collected.\r\nThe error returned is: %3.\r\n	System	2036	SysMon	Warning
Unable to create the %1 folder for the %2 log configuration.\r\nThis log will not be started.\r\nThe error returned is: %3.\r\n	System	2037	SysMon	Warning
Alert %1 has been started or restarted.\r\n	System	2038	SysMon	Information
Unable to execute command '%1' for the %2 alert.  \r\nThe alert will continue as scheduled.\r\nThe error code returned is in the data.\r\n	System	2039	SysMon	Warning
Unable to execute command '%1' for the %2 log.  \r\nThe log will continue as scheduled.\r\nThe error returned is: %3.\r\n	System	2040	SysMon	Warning
The service was unable to open the command or program file: %1. The %2 log or alert will\r\ncontinue as scheduled.  Check the file for existence, spelling and permissions or reenter\r\nthe file name using the configuration program.\r\nThe error returned i	System	2041	SysMon	Warning
Unable to allocate memory while starting the %1 log. \r\nThis log will not be started.\r\nThe error code returned is in the data.\r\n	System	2042	SysMon	Warning
The service was unable to send a message for alert %1 to machine %2. The alert will\r\ncontinue as scheduled.\r\nThe error returned is: %3.\r\n	System	2043	SysMon	Warning
Unable to read the configuration of the %1 log, started in response to the %2 alert trigger.  The alert will\r\ncontinue as scheduled.\r\n	System	2044	SysMon	Warning
Unable to start the %1 log in response to the %2 alert trigger.  The alert will\r\ncontinue as scheduled.\r\nThe error code returned is in the data.\r\n	System	2045	SysMon	Warning
Unable to create the %1 log file. The log will not be started.\r\nError returned is: %2.\r\n	System	2046	SysMon	Warning
The service was unable to add the counter '%1' to the %2 log or alert.\r\nThis log or alert will continue, but data for that counter will not be collected.\r\nTo collect data from a remote computer, the Performance Logs and Alerts service\r\nmust run unde	System	2047	SysMon	Warning
Creation of the %1 log or alert is not complete. This log will not be started.	System	2048	SysMon	Warning
Starting service.\r\n	System	2049	SysMon	Information
Handler registered.\r\n	System	2050	SysMon	Information
Clear run states.\r\n	System	2051	SysMon	Information
Default folder loaded.\r\n	System	2052	SysMon	Information
Event source registered.\r\n	System	2053	SysMon	Information
Config event created.\r\n	System	2054	SysMon	Information
Service control dispatcher started.\r\n	System	2055	SysMon	Information
The open operation on log file: %1 for log %2 generated a warning. The log will continue. The warning returned is: %3.	System	2056	SysMon	Warning
TDIOpenPerformanceData routine completed successfully.\r\n	Application	2099	Perfctrs	Information
TDICollectPerformanceData routine entered.\r\n	Application	2100	Perfctrs	Information
A Null TDI device handle was encountered in the Collect routine. The TDI file was probably not opened in the Open routine.\r\n	Application	2101	Perfctrs	Warning
The workstation driver is not installed.\r\n	System	2102	System	Error
A request for data from a foreign computer was received by the TDI Collection routine. This request was ignored and no data was returned.\r\n	Application	2102	Perfctrs	Information
The server could not be located.\r\n	System	2103	System	Error
A request for a counter object not provided by the TDI Collection routine was received.\r\n	Application	2103	Perfctrs	Information
An internal error occurred.  The network cannot access a shared memory segment.\r\n	System	2104	System	Error
The request for data from the TDI Device IO Control failed. Returning the IO Status Block.\r\n	Application	2104	Perfctrs	Error
A network resource shortage occurred .\r\n	System	2105	System	Error
Successful data request from the TDI device.\r\n	Application	2105	Perfctrs	Information
This operation is not supported on workstations.\r\n	System	2106	System	Error
The buffer passed to CollectTDIPerformanceData was too small to receive the data. No data was returned. The message data shows the available and the required buffer size.\r\n	Application	2106	Perfctrs	Error
The device is not connected.\r\n	System	2107	System	Error
The buffer passed was large enough for the counter data. The counters will now be loaded.\r\n	Application	2107	Perfctrs	Error
The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.\r\n	System	2108	Winnet32	Error
The Server service is not started.\r\n	System	2114	System	Error
The queue is empty.\r\n	System	2115	System	Error
The device or directory does not exist.\r\n	System	2116	System	Error
The operation is invalid on a redirected resource.\r\n	System	2117	System	Error
The name has already been shared.\r\n	System	2118	System	Error
The server is currently out of the requested resource.\r\n	System	2119	System	Error
Requested addition of items exceeds the maximum allowed.\r\n	System	2121	System	Error
The Peer service supports only two simultaneous users.\r\n	System	2122	System	Error
The API return buffer is too small.\r\n	System	2123	System	Error
A remote API error occurred.\r\n	System	2127	System	Error
An error occurred when opening or reading the configuration file.\r\n	System	2131	System	Error
A general network error occurred.\r\n	System	2136	System	Error
The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service.\r\n	System	2137	System	Error
The Workstation service has not been started.\r\n	System	2138	System	Error
The requested information is not available.\r\n	System	2139	System	Error
An internal Windows 2000 error occurred.\r\n	System	2140	System	Error
The server is not configured for transactions.\r\n	System	2141	System	Error
The requested API is not supported on the remote server.\r\n	System	2142	System	Error
The event name is invalid.\r\n	System	2143	System	Error
The computer name already exists on the network. Change it and restart the computer.\r\n	System	2144	System	Error
The specified component could not be found in the configuration information.\r\n	System	2146	System	Error
The specified parameter could not be found in the configuration information.\r\n	System	2147	System	Error
A line in the configuration file is too long.\r\n	System	2149	System	Error
The printer does not exist.\r\n	System	2150	System	Error
The print job does not exist.\r\n	System	2151	System	Error
The printer destination cannot be found.\r\n	System	2152	System	Error
The printer destination already exists.\r\n	System	2153	System	Error
The printer queue already exists.\r\n	System	2154	System	Error
No more printers can be added.\r\n	System	2155	System	Error
No more print jobs can be added.\r\n	System	2156	System	Error
No more printer destinations can be added.\r\n	System	2157	System	Error
This printer destination is idle and cannot accept control operations.\r\n	System	2158	System	Error
This printer destination request contains an invalid control function.\r\n	System	2159	System	Error
The print processor is not responding.\r\n	System	2160	System	Error
The spooler is not running.\r\n	System	2161	System	Error
This operation cannot be performed on the print destination in its current state.\r\n	System	2162	System	Error
This operation cannot be performed on the printer queue in its current state.\r\n	System	2163	System	Error
This operation cannot be performed on the print job in its current state.\r\n	System	2164	System	Error
A spooler memory allocation failure occurred.\r\n	System	2165	System	Error
The device driver does not exist.\r\n	System	2166	System	Error
The data type is not supported by the print processor.\r\n	System	2167	System	Error
The print processor is not installed.\r\n	System	2168	System	Error
The service database is locked.\r\n	System	2180	System	Error
The service table is full.\r\n	System	2181	System	Error
The requested service has already been started.\r\n	System	2182	System	Error
The service does not respond to control actions.\r\n	System	2183	System	Error
The service has not been started.\r\n	System	2184	System	Error
The service name is invalid.\r\n	System	2185	System	Error
The service is not responding to the control function.\r\n	System	2186	System	Error
The service control is busy.\r\n	System	2187	System	Error
The configuration file contains an invalid service program name.\r\n	System	2188	System	Error
The service could not be controlled in its present state.\r\n	System	2189	System	Error
The service ended abnormally.\r\n	System	2190	System	Error
The requested pause or stop is not valid for this service.\r\n	System	2191	System	Error
The service control dispatcher could not find the service name in the dispatch table.\r\n	System	2192	System	Information
The service control dispatcher pipe read failed.\r\n	System	2193	System	Error
A thread for the new service could not be created.\r\n	System	2194	System	Error
CollectTDIPerformanceData routine successfully completed.\r\n	Application	2199	Perfctrs	Information
This workstation is already logged on to the local-area network.\r\n	System	2200	System	Error
CloseTDIPerformanceData routine entered.\r\n	Application	2200	Perfctrs	Information
The workstation is not logged on to the local-area network.\r\n	System	2201	System	Error
Provider Information data block released successfully\r\n	Application	2201	Perfctrs	Information
The specified username is invalid.\r\n	System	2202	Winnet32	Error
The user name or group name parameter is invalid.\r\n	System	2202	System	Error
Provider Stats data block released successfully\r\n	Application	2202	Perfctrs	Information
No SPX Devices are currently open or the NWLink SPX/SPXII service has\r\nnot been started. SPX performance data cannot be collected.\r\n	Application	2203	Perfctrs	Warning
The password parameter is invalid.\r\n	System	2203	System	Error
The logon processor did not add the message alias.\r\n	System	2204	System	Error
The logon processor did not add the message alias.\r\n	System	2205	System	Error
The logoff processor did not delete the message alias.\r\n	System	2206	System	Information
The logoff processor did not delete the message alias.\r\n	System	2207	System	Information
Network logons are paused.\r\n	System	2209	System	Error
A centralized logon-server conflict occurred.\r\n	System	2210	System	Error
The server is configured without a valid user path.\r\n	System	2211	System	Error
An error occurred while loading or running the logon script.\r\n	System	2212	System	Error
The logon server was not specified.  Your computer will be logged on as STANDALONE.\r\n	System	2214	System	Error
The logon server could not be found.\r\n	System	2215	System	Error
There is already a logon domain for this computer.\r\n	System	2216	System	Error
The logon server could not validate the logon.\r\n	System	2217	System	Error
The security database could not be found.\r\n	System	2219	System	Error
The group name could not be found.\r\n	System	2220	System	Error
The user name could not be found.\r\n	System	2221	System	Error
The resource name could not be found.\r\n	System	2222	System	Error
The group already exists.\r\n	System	2223	System	Error
The account already exists.\r\n	System	2224	System	Error
The resource permission list already exists.\r\n	System	2225	System	Error
This operation is only allowed on the primary domain controller of the domain.\r\n	System	2226	System	Error
The security database has not been started.\r\n	System	2227	System	Error
There are too many names in the user accounts database.\r\n	System	2228	System	Error
A disk I/O failure occurred.\r\n	System	2229	System	Error
The limit of 64 entries per resource was exceeded.\r\n	System	2230	System	Error
Deleting a user with a session is not allowed.\r\n	System	2231	System	Error
The parent directory could not be located.\r\n	System	2232	System	Error
Unable to add to the security database session cache segment.\r\n	System	2233	System	Information
This operation is not allowed on this special group.\r\n	System	2234	System	Information
This user is not cached in user accounts database session cache.\r\n	System	2235	System	Error
The user already belongs to this group.\r\n	System	2236	System	Information
The user does not belong to this group.\r\n	System	2237	System	Error
This user account is undefined.\r\n	System	2238	System	Error
This user account has expired.\r\n	System	2239	System	Error
The user is not allowed to log on from this workstation.\r\n	System	2240	System	Error
The user is not allowed to log on at this time.\r\n	System	2241	System	Error
The password of this user has expired.\r\n	System	2242	System	Error
The password of this user cannot change.\r\n	System	2243	System	Error
This password cannot be used now.\r\n	System	2244	System	Error
The password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements.\r\n	System	2245	System	Error
The password of this user is too recent to change.\r\n	System	2246	System	Error
The security database is corrupted.\r\n	System	2247	System	Error
No updates are necessary to this replicant network/local security database.\r\n	System	2248	System	Information
This replicant database is outdated; synchronization is required.\r\n	System	2249	System	Error
This network connection does not exist.\r\n	System	2250	Winnet32	Error
The network connection could not be found.\r\n	System	2250	System	Error
This asg type is invalid.\r\n	System	2251	System	Error
This device is currently being shared.\r\n	System	2252	System	Error
The computer name could not be added as a message alias.  The name may already exist on the network.\r\n	System	2270	System	Error
The Messenger service is already started.\r\n	System	2271	System	Error
The Messenger service failed to start.\r\n	System	2272	System	Error
The message alias could not be found on the network.\r\n	System	2273	System	Information
This message alias has already been forwarded.\r\n	System	2274	System	Information
This message alias has been added but is still forwarded.\r\n	System	2275	System	Error
This message alias already exists locally.\r\n	System	2276	System	Error
The maximum number of added message aliases has been exceeded.\r\n	System	2277	System	Error
The computer name could not be deleted.\r\n	System	2278	System	Information
Messages cannot be forwarded back to the same workstation.\r\n	System	2279	System	Information
An error occurred in the domain message processor.\r\n	System	2280	System	Error
The message was sent, but the recipient has paused the Messenger service.\r\n	System	2281	System	Error
The message was sent but not received.\r\n	System	2282	System	Error
The message alias is currently in use. Try again later.\r\n	System	2283	System	Error
The Messenger service has not been started.\r\n	System	2284	System	Error
The name is not on the local computer.\r\n	System	2285	System	Error
The forwarded message alias could not be found on the network.\r\n	System	2286	System	Error
The message alias table on the remote station is full.\r\n	System	2287	System	Error
Messages for this alias are not currently being forwarded.\r\n	System	2288	System	Information
The broadcast message was truncated.\r\n	System	2289	System	Error
This is an invalid device name.\r\n	System	2294	System	Error
A write fault occurred.\r\n	System	2295	System	Error
A duplicate message alias exists on the network.\r\n	System	2297	System	Error
This message alias will be deleted later.\r\n	System	2298	System	Error
The message alias was not successfully deleted from all networks.\r\n	System	2299	System	Error
TDI counters are requesting Event Log access to close.\r\n	Application	2299	Perfctrs	Information
This operation is not supported on computers with multiple networks.\r\n	System	2300	System	Information
This shared resource does not exist.\r\n	System	2310	System	Error
This device is not shared.\r\n	System	2311	System	Error
A session does not exist with that computer name.\r\n	System	2312	System	Error
There is not an open file with that identification number.\r\n	System	2314	System	Error
A failure occurred when executing a remote administration command.\r\n	System	2315	System	Error
A failure occurred when opening a remote temporary file.\r\n	System	2316	System	Error
The data returned from a remote administration command has been truncated to 64K.\r\n	System	2317	System	Information
This device cannot be shared as both a spooled and a non-spooled resource.\r\n	System	2318	System	Error
The information in the list of servers may be incorrect.\r\n	System	2319	System	Error
The computer is not active in this domain.\r\n	System	2320	System	Error
The share must be removed from the Distributed File System before it can be deleted.\r\n	System	2321	System	Error
The operation is invalid for this device.\r\n	System	2331	System	Error
This device cannot be shared.\r\n	System	2332	System	Error
This device was not open.\r\n	System	2333	System	Information
This device name list is invalid.\r\n	System	2334	System	Error
The queue priority is invalid.\r\n	System	2335	System	Error
There are no shared communication devices.\r\n	System	2337	System	Error
The queue you specified does not exist.\r\n	System	2338	System	Error
This list of devices is invalid.\r\n	System	2340	System	Error
The requested device is invalid.\r\n	System	2341	System	Error
This device is already in use by the spooler.\r\n	System	2342	System	Error
This device is already in use as a communication device.\r\n	System	2343	System	Error
This computer name is invalid.\r\n	System	2351	System	Error
The string and prefix specified are too long.\r\n	System	2354	System	Error
This path component is invalid.\r\n	System	2356	System	Error
Could not determine the type of input.\r\n	System	2357	System	Error
The buffer for types is not big enough.\r\n	System	2362	System	Error
Profile files cannot exceed 64K.\r\n	System	2370	System	Error
The start offset is out of range.\r\n	System	2371	System	Error
The system cannot delete current connections to network resources.\r\n	System	2372	System	Error
The system was unable to parse the command line in this file.\r\n	System	2373	System	Error
An error occurred while loading the profile file.\r\n	System	2374	System	Error
Errors occurred while saving the profile file.  The profile was partially saved.\r\n	System	2375	System	Error
Log file %1 is full.\r\n	System	2377	System	Error
This log file has changed between reads.\r\n	System	2378	System	Error
Log file %1 is corrupt.\r\n	System	2379	System	Error
The source path cannot be a directory.\r\n	System	2380	System	Error
The source path is illegal.\r\n	System	2381	System	Error
The destination path is illegal.\r\n	System	2382	System	Error
The source and destination paths are on different servers.\r\n	System	2383	System	Error
The Run server you requested is paused.\r\n	System	2385	System	Error
An error occurred when communicating with a Run server.\r\n	System	2389	System	Error
An error occurred when starting a background process.\r\n	System	2391	System	Error
The shared resource you are connected to could not be found.\r\n	System	2392	System	Error
The LAN adapter number is invalid.\r\n	System	2400	System	Error
This network connection has files open or requests pending.\r\n	System	2401	Winnet32	Error
There are open files on the connection.\r\n	System	2401	System	Error
Active connections still exist.\r\n	System	2402	Winnet32	Error
Active connections still exist.\r\n	System	2402	System	Error
This share name or password is invalid.\r\n	System	2403	System	Error
The device is in use by an active process and cannot be disconnected.\r\n	System	2404	Winnet32	Error
The device is being accessed by an active process.\r\n	System	2404	System	Error
The drive letter is in use locally.\r\n	System	2405	System	Error
The specified client is already registered for the specified event.\r\n	System	2430	System	Error
The alert table is full.\r\n	System	2431	System	Error
An invalid or nonexistent alert name was raised.\r\n	System	2432	System	Error
The alert recipient is invalid.\r\n	System	2433	System	Error
A user's session with this server has been deleted\r\nbecause the user's logon hours are no longer valid.\r\n	System	2434	System	Error
The log file does not contain the requested record number.\r\n	System	2440	System	Error
The user accounts database is not configured correctly.\r\n	System	2450	System	Error
This operation is not permitted when the Netlogon service is running.\r\n	System	2451	System	Error
This operation is not allowed on the last administrative account.\r\n	System	2452	System	Error
Could not find domain controller for this domain.\r\n	System	2453	NetLogon	Error
Could not set logon information for this user.\r\n	System	2454	NetLogon	Error
The Netlogon service has not been started.\r\n	System	2455	NetLogon	Error
Unable to add to the user accounts database.\r\n	System	2456	System	Error
This server's clock is not synchronized with the primary domain controller's clock.\r\n	System	2457	System	Error
A password mismatch has been detected.\r\n	System	2458	System	Error
The server identification does not specify a valid server.\r\n	System	2460	System	Error
The session identification does not specify a valid session.\r\n	System	2461	System	Error
The connection identification does not specify a valid connection.\r\n	System	2462	System	Error
There is no space for another entry in the table of available servers.\r\n	System	2463	System	Error
The server has reached the maximum number of sessions it supports.\r\n	System	2464	System	Error
The server has reached the maximum number of connections it supports.\r\n	System	2465	System	Error
The server cannot open more files because it has reached its maximum number.\r\n	System	2466	System	Error
There are no alternate servers registered on this server.\r\n	System	2467	System	Error
Try down-level (remote admin protocol) version of API instead.\r\n	System	2470	System	Information
The UPS driver could not be accessed by the UPS service.\r\n	System	2480	UPS	Error
The UPS service is not configured correctly.\r\n	System	2481	UPS	Error
The UPS service could not access the specified Comm Port.\r\n	System	2482	UPS	Error
The UPS indicated a line fail or low battery situation. Service not started.\r\n	System	2483	UPS	Error
The UPS service failed to perform a system shut down.\r\n	System	2484	UPS	Error
The program below returned an <NOBR>MS-DOS</NOBR> error code:\r\n	System	2500	System	Information
The server's Registry key %1 was not present.  The server could not start.\r\n	System	2501	Srv	Error
The program below needs more memory:\r\n	System	2501	System	Error
The server's Registry key %1 was not present and could not be created.  The server could not start.\r\n	System	2502	Srv	Error
The program below called an unsupported <NOBR>MS-DOS</NOBR> function:\r\n	System	2502	System	Information
The server did not bind to any transports.  The server could not start.\r\n	System	2503	Srv	Error
The workstation failed to boot.\r\n	System	2503	System	Information
The server could not bind to the transport %1.\r\n	System	2504	Srv	Warning
The file below is corrupt.\r\n	System	2504	System	Information
The server could not bind to the transport %1 because another computer on the network has the same name.  The server could not start.\r\n	System	2505	Srv	Error
No loader is specified in the boot-block definition file.\r\n	System	2505	System	Information
The value named %1 in the server's Registry key %2 was invalid.  The value was ignored, and processing continued.\r\n	System	2506	Srv	Warning
NetBIOS returned an error: The NCB and SMB are dumped above.\r\n	System	2506	NetBIOS	Error
The security descriptor stored in the Registry for the share %1 was invalid.  The share was not automatically recreated.\r\n	System	2507	Srv	Warning
A disk I/O error occurred.\r\n	System	2507	System	Error
The server service was unable to load the server driver.\r\n	System	2508	Srv	Warning
Image parameter substitution failed.\r\n	System	2508	System	Information
The server service was unable to unload the server driver.\r\n	System	2509	Srv	Warning
Too many image parameters cross disk sector boundaries.\r\n	System	2509	System	Information
The server service was unable to map error code %1.\r\n	System	2510	Srv	Warning
The image was not generated from an <NOBR>MS-DOS</NOBR> diskette formatted with /S.\r\n	System	2510	System	Information
The server service was unable to recreate the share %1 because the directory %2 no longer exists.\r\n	System	2511	Srv	Warning
Remote boot will be restarted later.\r\n	System	2511	System	Information
The server service was unable to change the domain name from %1 to %2.\r\n	System	2512	Srv	Warning
The call to the Remoteboot server failed.\r\n	System	2512	System	Information
Cannot connect to the Remoteboot server.\r\n	System	2513	System	Information
Cannot open image file on the Remoteboot server.\r\n	System	2514	System	Information
Connecting to the Remoteboot server...\r\n	System	2515	System	Information
Connecting to the Remoteboot server...\r\n	System	2516	System	Information
Remote boot service was stopped; check the error log for the cause of the problem.\r\n	System	2517	System	Information
Remote boot startup failed; check the error log for the cause of the problem.\r\n	System	2518	System	Error
A second connection to a Remoteboot resource is not allowed.\r\n	System	2519	System	Error
The browser service was configured with MaintainServerList=No.\r\n	System	2550	Browser	Error
Service failed to start since none of the network adapters started with this service.\r\n	Application	2610	Replicator	Error
Service failed to start due to bad startup information in the registry.\r\n	Application	2611	Replicator	Error
Service failed to start because its database is absent or corrupt.\r\n	Application	2612	Replicator	Error
Service failed to start because RPLFILES share is absent.\r\n	Application	2613	Replicator	Error
Service failed to start because RPLUSER group is absent.\r\n	Application	2614	Replicator	Error
Cannot enumerate service records.\r\n	Application	2615	Replicator	Error
Workstation record information has been corrupted.\r\n	Application	2616	Replicator	Error
Workstation record was not found.\r\n	Application	2617	Replicator	Error
Workstation name is in use by some other workstation.\r\n	Application	2618	Replicator	Error
Profile record information has been corrupted.\r\n	Application	2619	Replicator	Error
Profile record was not found.\r\n	Application	2620	Replicator	Error
Profile name is in use by some other profile.\r\n	Application	2621	Replicator	Error
There are workstations using this profile.\r\n	Application	2622	Replicator	Error
Configuration record information has been corrupted.\r\n	Application	2623	Replicator	Error
Configuration record was not found.\r\n	Application	2624	Replicator	Error
Adapter id record information has been corrupted.\r\n	Application	2625	Replicator	Error
An internal service error has occurred.\r\n	Application	2626	Replicator	Error
Vendor id record information has been corrupted.\r\n	Application	2627	Replicator	Error
Boot block record information has been corrupted.\r\n	Application	2628	Replicator	Error
The user account for this workstation record is missing.\r\n	Application	2629	Replicator	Error
The RPLUSER local group could not be found.\r\n	Application	2630	Replicator	Error
Boot block record was not found.\r\n	Application	2631	Replicator	Error
Chosen profile is incompatible with this workstation.\r\n	Application	2632	Replicator	Error
Chosen network adapter id is in use by some other workstation.\r\n	Application	2633	Replicator	Error
There are profiles using this configuration.\r\n	Application	2634	Replicator	Error
There are workstations, profiles or configurations using this boot block.\r\n	Application	2635	Replicator	Error
Service failed to backup Remoteboot database.\r\n	Application	2636	Replicator	Error
Adapter record was not found.\r\n	Application	2637	Replicator	Error
Vendor record was not found.\r\n	Application	2638	Replicator	Error
Vendor name is in use by some other vendor record.\r\n	Application	2639	Replicator	Error
(boot name, vendor id) is in use by some other boot block record.\r\n	Application	2640	Replicator	Error
Configuration name is in use by some other configuration.\r\n	Application	2641	Replicator	Error
The internal database maintained by the Dfs service is corrupt\r\n	System	2660	Dfs	Error
One of the records in the internal Dfs database is corrupt\r\n	System	2661	Dfs	Error
There is no volume whose entry path matches the input Entry Path\r\n	System	2662	Dfs	Error
A volume with the given name already exists\r\n	System	2663	Dfs	Error
The server share specified is already shared in the Dfs\r\n	System	2664	Dfs	Error
The indicated server share does not support the indicated Dfs volume\r\n	System	2665	Dfs	Error
The operation is not valid on a non-leaf volume\r\n	System	2666	Dfs	Error
The operation is not valid on a leaf volume\r\n	System	2667	Dfs	Error
The operation is ambiguous because the volume has multiple servers\r\n	System	2668	Dfs	Error
Unable to create a junction point\r\n	System	2669	Dfs	Error
The server is not Dfs Aware\r\n	System	2670	Dfs	Error
The specified rename target path is invalid\r\n	System	2671	Dfs	Error
The specified Dfs volume is offline\r\n	System	2672	Dfs	Error
The specified server is not a server for this volume\r\n	System	2673	Dfs	Error
A cycle in the Dfs name was detected\r\n	System	2674	Dfs	Error
The operation is not supported on a server-based Dfs\r\n	System	2675	Dfs	Error
This volume is already supported by the specified server-share\r\n	System	2676	Dfs	Error
Can't remove the last server-share supporting this volume\r\n	System	2677	Dfs	Error
The operation is not supported for an Inter-Dfs volume\r\n	System	2678	Dfs	Error
The internal state of the Dfs Service has become inconsistent\r\n	System	2679	Dfs	Error
The Dfs Service has been installed on the specified server\r\n	System	2680	Dfs	Information
The Dfs data being reconciled is identical\r\n	System	2681	Dfs	Error
The Dfs root volume cannot be deleted - Uninstall Dfs if required\r\n	System	2682	Dfs	Error
A child or parent directory of the share is already in a Dfs\r\n	System	2683	Dfs	Error
Dfs internal error\r\n	System	2690	Dfs	Error
This machine is already joined to a domain.\r\n	System	2691	Dfs	Error
This machine is not currently joined to a domain.\r\n	System	2692	Dfs	Error
This machine is a domain controller and cannot be unjoined from a domain.\r\n	System	2693	Dfs	Error
The destination domain controller does not support creating machine accounts in OUs.\r\n	System	2694	Dfs	Error
The specified workgroup name is invalid\r\n	System	2695	Dfs	Error
The specified computer name is incompatible with the default language used on the domain controller.\r\n	System	2696	System	Error
The specified computer account could not be found.\r\n	System	2697	System	Error
This is the last error in NERR range.\r\n	System	2999	System	Error
Error positioning to end of log file -- handle is invalid.\r\nHandle specified is %1.\r\n	Application	3000	EvntAgnt	Error
The specified print monitor is unknown.\r\n	System	3000	Win32 Spooler	Error
Drive %1 is nearly full. %2 bytes are available.\r\nPlease warn users and delete unneeded files.\r\n	System	3000	Alerter	Error
The specified object is not found on the system.\r\n	System	3000	PDH	Error
OpenNbtPerformanceData routine entered\r\n	Application	3000	Perfctrs	Information
OpenATKPerformanceData routine entered.\r\n	Application	3000	Atkctrs	Information
The specified printer driver is currently in use.\r\n	System	3001	Win32 Spooler	Error
The redirector was unable to allocate memory.\r\n	System	3001	Rdr	Error
%1 errors were logged in the last %2 minutes.\r\nPlease review the server's error log.\r\n	System	3001	System	Error
Unable to open NBT device.\r\n	Application	3001	Perfctrs	Error
The specified counter could not be found.\r\n	System	3001	PDH	Error
Unable to open ATK device for R access. Returning IO Status Block in Data.\r\n	Application	3001	Atkctrs	Error
Log file not positioned at end.\r\n	Application	3001	EvntAgnt	Warning
Error positioning to end of log file -- log buffer allocation failed.\r\nHandle specified is %1.\r\n	Application	3002	EvntAgnt	Error
The spool file was not found.\r\n	System	3002	Win32 Spooler	Error
The redirector could not create its device.  The redirector could not be started.\r\n	System	3002	Rdr	Error
%1 network errors occurred in the last %2 minutes.\r\nPlease review the server's error log.  The server and/or\r\nnetwork hardware may need service.\r\n	System	3002	System	Error
The returned data is not valid.\r\n	System	3002	PDH	Error
Opened ATK device for R access.\r\n	Application	3002	Atkctrs	Error
Error positioning to end of log file -- can't get oldest log record.\r\nHandle specified is %1. Return code from GetOldestEventLogRecord is %2.\r\n	Application	3003	EvntAgnt	Error
A StartDocPrinter call was not issued.\r\n	System	3003	Win32 Spooler	Error
The redirector could not create a system thread.\r\n	System	3003	Rdr	Error
There were %1 bad password attempts in the last %2 minutes.\r\nPlease review the server's audit trail.\r\n	System	3003	Alerter	Error
A PDH function could not allocate enough temporary memory to complete the\r\noperation. Close some applications or extend the pagefile and retry the \r\nfunction.\r\n	System	3003	PDH	Error
Error requesting data from Device IO Control. Returning IO Status Block.\r\n	Application	3003	Atkctrs	Error
Error positioning to end of log file -- can't get number of log records.\r\nHandle specified is %1. Return code from GetNumberOfEventLogRecords is %2.\r\n	Application	3004	EvntAgnt	Error
An AddJob call was not issued.\r\n	System	3004	Win32 Spooler	Error
The redirector could not set the priority for a system thread.\r\n	System	3004	Rdr	Error
There were %1 access-denied errors in the last %2 minutes.\r\nPlease review the server's audit trail.\r\n	System	3004	Alerter	Error
The handle is not a valid PDH object.\r\n	System	3004	PDH	Error
Unable to read data from the ATK device.\r\n	Application	3004	Atkctrs	Error
Error positioning to end of log file -- seek to end of log failed.\r\nHandle specified is %1. Return code from ReadEventLog is %2.\r\n	Application	3005	EvntAgnt	Error
The specified print processor has already been installed.\r\n	System	3005	Win32 Spooler	Error
The redirector received an incorrectly formatted response from %2.\r\n	System	3005	Rdr	Error
A required argument is missing or incorrect.\r\n	System	3005	PDH	Error
Data received from Device IO Control. Returning IO Status Block.\r\n	Application	3005	Atkctrs	Error
The specified print monitor has already been installed.\r\n	System	3006	Win32 Spooler	Error
The redirector received an SMB that was too short.\r\n	System	3006	Rdr	Error
The error log is full.  No errors will be logged until\r\nthe file is cleared or the limit is raised.\r\n	System	3006	Alerter	Error
Unable to find the specified function.\r\n	System	3006	PDH	Error
Error reading log event record.\r\nHandle specified is %1. Return code from ReadEventLog is %2.\r\n	Application	3006	EvntAgnt	Warning
The specified print monitor does not have the required functions.\r\n	System	3007	Win32 Spooler	Error
The redirector received an incorrect response from %2 to a lock request.\r\n	System	3007	Rdr	Error
The error log is 80%% full.\r\n	System	3007	Alerter	Error
No counter was specified.\r\n	System	3007	PDH	Error
Error opening event log file %1. Log will not be processed.\r\nReturn code from OpenEventLog is %2.\r\n	Application	3007	EvntAgnt	Warning
The specified print monitor is currently in use.\r\n	System	3008	Win32 Spooler	Error
The audit log is full.  No audit entries will be logged\r\nuntil the file is cleared or the limit is raised.\r\n	System	3008	Alerter	Error
Unable to parse the counter path. Check the format and syntax of the \r\nspecified path.\r\n	System	3008	PDH	Error
Error pulsing event for log processing routine shutdown event %1.\r\nReturn code from PulseEvent is %2.\r\n	Application	3008	EvntAgnt	Warning
Insufficient memory available to allocate the wait event array.\r\n	Application	3009	EvntAgnt	Error
The requested operation is not allowed when there are jobs queued to the printer.\r\n	System	3009	Win32 Spooler	Error
Installing the performance counter strings for %1!s! failed. The\r\nError code is DWORD 0 of the Record Data.\r\n	Application	3009	LoadPerf	Error
The redirector failed to unlock part of a file on server %2.\r\n	System	3009	Rdr	Error
The audit log is 80%% full.\r\n	System	3009	Alerter	Error
The buffer passed by the caller is invalid.\r\n	System	3009	PDH	Error
Insufficient memory available to reallocate the log event array.\r\n	Application	3010	EvntAgnt	Error
The requested operation is successful. Changes will not be effective until the system is rebooted.\r\n	System	3010	Win32 Spooler	Error
An error occurred closing file %1.\r\nPlease check the file to make sure it is not corrupted.\r\n	System	3010	System	Error
The requested data is larger than the buffer supplied. Unable to return the\r\nrequested data.\r\n	System	3010	PDH	Error
Insufficient memory available to allocate dynamic variable.\r\n	Application	3011	EvntAgnt	Error
The requested operation is successful. Changes will not be effective until the service is restarted.\r\n	System	3011	Win32 Spooler	Error
The redirector failed to write data to server %2 after the file was closed.\r\n	System	3011	Rdr	Error
The administrator has closed %1.\r\n	System	3011	System	Error
Unable to connect to the requested machine.\r\n	System	3011	PDH	Error
Insufficient memory available to reallocate the log name array.\r\n	Application	3012	EvntAgnt	Error
No printers were found.\r\n	System	3012	Win32 Spooler	Error
An unexpected network error has occurred on the virtual circuit to %2.\r\n	System	3012	Rdr	Error
There were %1 access-denied errors in the last %2 minutes.\r\n	System	3012	Alerter	Error
The specified counter path could not be interpreted.\r\n	System	3012	PDH	Error
Insufficient memory available to reallocate the PrimaryModule handle array.\r\n	Application	3013	EvntAgnt	Error
The redirector has timed out a request to %2.\r\n	System	3013	Rdr	Error
The instance name could not be read from the specified counter path.\r\n	System	3013	PDH	Error
Insufficient memory available to reallocate the insertion strings for secondary parameters.\r\nFurther secondary substitution has been terminated. Message will be formatted with strings as is.\r\n	Application	3014	EvntAgnt	Error
The redirector received an invalid oplock level from %2.\r\n	System	3014	Rdr	Error
The data is not valid.\r\n	System	3014	PDH	Error
Performance threshold values have been reached.\r\nTrap processing is being quiesed. Further traps will not be sent without operator intervention.\r\n	Application	3015	EvntAgnt	Information
The redirector dereferenced a connection through zero.\r\n	System	3015	Rdr	Error
The dialog box data block was missing or invalid.\r\n	System	3015	PDH	Error
Performance threshold values have been restored by operator intervention.\r\nTrap processing has been resumed.\r\n	Application	3016	EvntAgnt	Information
The redirector dereferenced a server through zero.\r\n	System	3016	Rdr	Error
Unable to read the counter and/or explain text from the specified machine.\r\n	System	3016	PDH	Error
Performance threshold values have been set by operator intervention.\r\nCurrent settings indicate performance thresholds have been reached.\r\nTrap processing is being quiesed. Further traps will not be sent without operator intervention.\r\n	Application	3017	EvntAgnt	Information
The redirector dereferenced the allocated SMB count through zero.\r\n	System	3017	Rdr	Error
The redirector accessed a share-level server that indicates it encrypts passwords.\r\nThis combination is not supported.\r\n	System	3018	Rdr	Error
The redirector failed to determine the connection type.\r\n	System	3019	Rdr	Error
A power failure was detected at %1.  The server has been paused.\r\n	System	3020	Alerter	Error
The redirector failed to allocate a multiplex table entry.  This indicates that\r\nthe MAXCMDS parameter to the redirector is insufficient for the users needs.\r\n	System	3021	Rdr	Error
Power has been restored at %1.  The server is no longer paused.\r\n	System	3021	System	Information
The redirector failed to allocate a buffer for an oplock break.\r\n	System	3022	Rdr	Error
The UPS service is starting shut down at %1 due to low battery.\r\n	System	3022	System	Information
The redirector failed to map the requested file disposition (for NtCreateFile).\r\n	System	3023	Rdr	Error
There is a problem with a configuration of user specified\r\nshut down command file.  The UPS service started anyway.\r\n	System	3023	System	Information
The redirector is allocating additional resources for input/output request packet contexts.  This is\r\nprobably caused by a resource leak in the redirector.\r\n	System	3024	Rdr	Warning
A write-behind operation has failed to the remote server %2.  The data contains the amount requested to write and the amount actually written.\r\n	System	3025	Rdr	Error
A defective sector on drive %1 has been replaced (hotfixed).\r\nNo data was lost.  You should run CHKDSK soon to restore full\r\nperformance and replenish the volume's spare sector pool.\r\n\r\nThe hotfix occurred while processing a remote request.\r\n	System	3025	Alerter	Error
The redirector was unable to create a worker thread because it has already created the maximum number of configured work threads.\r\n	System	3026	Rdr	Error
A disk error occurred on the HPFS volume in drive %1.\r\nThe error occurred while processing a remote request.\r\n	System	3026	Alerter	Error
The redirector was unable to initialize variables from the Registry.\r\n	System	3027	Rdr	Error
The user accounts database (NET.ACC) is corrupted.  The local security\r\nsystem is replacing the corrupted NET.ACC with the backup\r\nmade on %1 at %2.\r\nAny updates made to the database after this time are lost.\r\n\r\n	System	3027	Alerter	Error
The time zone bias calculated between %2 and the current workstation is too\r\nlarge.  The data specifies the number of 100ns units between the workstation\r\nand server.  Make sure that the time of day on the workstation and server are\r\ncorrect.\r\n	System	3028	Rdr	Warning
The user accounts database (NET.ACC) is missing. The local\r\nsecurity system is restoring the backup database\r\nmade on %1 at %2.\r\nAny updates made to the database after this time are lost.\r\n\r\n	System	3028	Alerter	Error
The redirector has failed to connect to the server %2 on the primary transport.  The data contains the error.\r\n	System	3029	Rdr	Error
Local security could not be started because the user accounts database\r\n(NET.ACC) was missing or corrupted, and no usable backup\r\ndatabase was present.\r\n\r\nTHE SYSTEM IS NOT SECURE.\r\n\r\n	System	3029	Alerter	Error
The redirector was unable to update the file attributes on a file located on server %2.\r\nThe data contains the name of the file.\r\n	System	3030	Rdr	Error
The server cannot export directory %1, to client %2.\r\nIt is exported from another server.\r\n	System	3030	Alerter	Error
The redirector was unable to delete the file specified on server %2 when it was closed by the application.\r\nThe data contains the name of the file.\r\n	System	3031	Rdr	Error
The replication server could not update directory %2 from the source\r\non %3 due to error %1.\r\n	System	3031	Alerter	Error
The redirector was unable to register the domain %2 on to transport %3 for the following reason: %4. Transport has been taken offline.\r\n	System	3032	Rdr	Error
Master %1 did not send an update notice for directory %2 at the expected\r\ntime.\r\n	System	3032	Alerter	Error
The redirector was unable to register the address for transport %3 for the following reason: %4. Transport has been taken offline.\r\n	System	3033	Rdr	Error
User %1 has exceeded account limitation %2 on server %3.\r\n	System	3033	Alerter	Error
The redirector was unable to initialize security context or query context attributes.\r\n	System	3034	Rdr	Error
The primary domain controller for domain %1 failed.\r\n	System	3034	System	Information
The redirector was unable to build SMB header.\r\n	System	3035	Rdr	Error
Failed to authenticate with %2, a Windows NT Domain Controller for\r\ndomain %1.\r\n	System	3035	Alerter	Error
The redirector detected a security signature mismatch. The connection has been disconnected.\r\n	System	3036	Rdr	Error
The replicator attempted to log on at %2 as %1 and failed.\r\n	System	3036	Alerter	Error
@I *LOGON HOURS %0\r\n	System	3037	System	Information
Replicator could not access %2\r\non %3 due to system error %1.\r\n	System	3038	Alerter	Error
Replicator limit for files in a directory has been exceeded.\r\n	System	3039	Alerter	Error
Replicator limit for tree depth has been exceeded.\r\n	System	3040	Alerter	Error
The replicator cannot update directory %1. It has tree integrity\r\nand is the current directory for some process.\r\n	System	3041	Alerter	Error
Network error %1 occurred.\r\n	System	3042	Alerter	Error
System error %1 occurred.\r\n	System	3045	Alerter	Error
Cannot log on. User is currently logged on and argument TRYUSER\r\nis set to NO.\r\n	System	3046	Alerter	Error
IMPORT path %1 cannot be found.\r\n	System	3047	Alerter	Error
EXPORT path %1 cannot be found.\r\n	System	3048	Alerter	Error
Replicated data has changed in directory %1.\r\n	System	3049	System	Error
Replicator failed to update signal file in directory %2 due to\r\n%1 system error.\r\n	System	3050	System	Error
The Registry or the information you just typed includes an illegal\r\nvalue for "%1".\r\n	System	3051	System	Error
The required parameter was not provided on the command\r\nline or in the configuration file.\r\n	System	3052	System	Error
LAN Manager does not recognize "%1" as a valid option.\r\n	System	3053	System	Error
A request for resource could not be satisfied.\r\n	System	3054	System	Error
A problem exists with the system configuration.\r\n	System	3055	System	Error
A system error has occurred.\r\n	System	3056	System	Error
An internal consistency error has occurred.\r\n	System	3057	System	Error
The configuration file or the command line has an ambiguous option.\r\n	System	3058	System	Error
The configuration file or the command line has a duplicate parameter.\r\n	System	3059	System	Error
The service did not respond to control and was stopped with\r\nthe DosKillProc function.\r\n	System	3060	System	Error
An error occurred when attempting to run the service program.\r\n	System	3061	System	Error
The sub-service failed to start.\r\n	System	3062	System	Error
There is a conflict in the value or use of these options: %1.\r\n	System	3063	System	Error
There is a problem with the file.\r\n	System	3064	System	Error
disk space\r\n	System	3071	System	Information
Security Failure. %0\r\n	System	3074	System	Error
Bad or missing LAN Manager root directory.\r\n	System	3075	System	Error
The network software is not installed.\r\n	System	3076	System	Error
The server is not started.\r\n	System	3077	System	Error
The server cannot access the user accounts database (NET.ACC).\r\n	System	3078	System	Error
Incompatible files are installed in the LANMAN tree.\r\n	System	3079	System	Error
The LANMAN directory is invalid.\r\n	System	3080	System	Error
The domain specified could not be used.\r\n	System	3081	System	Error
The computer name is being used as a message alias on another computer.\r\n	System	3082	System	Error
The announcement of the server name failed.\r\n	System	3083	System	Error
The user accounts database is not configured correctly.\r\n	System	3084	System	Error
The server is not running with user-level security.\r\n	System	3085	System	Error
The workstation is not configured properly.\r\n	System	3087	System	Error
View your error log for details.\r\n	System	3088	System	Error
Unable to write to this file.\r\n	System	3089	System	Error
ADDPAK file is corrupted.  Delete LANMAN\\NETPROG\\ADDPAK.SER\r\nand reapply all ADDPAKs.\r\n	System	3090	System	Error
The LM386 server cannot be started because CACHE.EXE is not running.\r\n	System	3091	System	Error
There is no account for this computer in the security database.\r\n	System	3092	System	Error
This computer is not a member of the group SERVERS.\r\n	System	3093	System	Information
The group SERVERS is not present in the local security database.\r\n	System	3094	System	Error
This Windows NT computer is configured as a member of a workgroup, not as\r\na member of a domain. The Netlogon service does not need to run in this\r\nconfiguration.\r\n	System	3095	System	Error
The Windows NT domain controller for this domain could not be located.\r\n	System	3096	System	Error
This computer is configured to be the primary domain controller of its domain.\r\nHowever, the computer %1 is currently claiming to be the primary domain controller\r\nof the domain.\r\n	System	3097	System	Error
The service failed to authenticate with the primary domain controller.\r\n	System	3098	System	Error
There is a problem with the security database creation date or serial number.\r\n	System	3099	System	Error
OpenNbtPerformanceData routine completed successfully\r\n	Application	3099	Perfctrs	Information
OpenAtkPerformanceData routine completed successfully.\r\n	Application	3099	Atkctrs	Information
The operation failed because a network software error occurred.\r\n	System	3100	System	Error
CollectNbtPerformanceData routine entered.\r\n	Application	3100	Perfctrs	Information
CollecAtkPerformanceData routine entered.\r\n	Application	3100	Atkctrs	Information
The system ran out of a resource controlled by the %1 option.\r\n	System	3101	System	Error
Unable to read IO control information from NBT device.\r\n	Application	3101	Perfctrs	Error
A Null ATK device handle was encountered in the Collect routine. The ATK file was probably not opened in the Open routine.\r\n	Application	3101	Atkctrs	Warning
The service failed to obtain a long-term lock on the\r\nsegment for network control blocks (NCBs). The error code is the data.\r\n	System	3102	System	Error
NBT device IO Control information read successfully.\r\n	Application	3102	Perfctrs	Information
A request for data from a foreign computer was received by the ATK Collection routine. This request was ignored and no data was returned.\r\n	Application	3102	Atkctrs	Information
The service failed to release the long-term lock on the\r\nsegment for network control blocks (NCBs). The error code is the data.\r\n	System	3103	System	Error
The data buffer passed to the collection routine was too small to receive the data from the NBT device. No data was returned to the caller. The bytes available and the bytes required are in the message data.\r\n	Application	3103	Perfctrs	Error
A request for a counter object not provided by the ATK Collection routine was received.\r\n	Application	3103	Atkctrs	Information
There was an error stopping service %1.\r\nThe error code from NetServiceControl is the data.\r\n	System	3104	System	Information
getmsg error in CollectNbtPerformanceData\r\n	Application	3104	Perfctrs	Error
The request for data from the ATK Device IO Control failed. Returning the IO Status Block.\r\n	Application	3104	Atkctrs	Error
Initialization failed because of a system execution failure on\r\npath %1. The system error code is the data.\r\n	System	3105	System	Information
NBT endpoint info error in CollectNbtPerformanceData\r\n	Application	3105	Perfctrs	Error
Successful data request from the ATK device.\r\n	Application	3105	Atkctrs	Information
An unexpected network control block (NCB) was received. The NCB is the data.\r\n	System	3106	System	Information
Loading an NBT Connection\r\n	Application	3106	Perfctrs	Information
The buffer passed to CollectATKPerformanceData was too small to receive the data. No data was returned. The message data shows the available and the required buffer size.\r\n	Application	3106	Atkctrs	Error
The network is not started.\r\n	System	3107	System	Information
The buffer passed was large enough for the counter data. The counters will now be loaded.\r\n	Application	3107	Atkctrs	Error
A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed.\r\nThe data shown is in this format:\r\nDWORD  approx CS:IP of call to ioctl or fsctl\r\nWORD   error code\r\nWORD   ioctl or fsctl number\r\n	System	3108	System	Information
Unable to create or open system semaphore %1.\r\nThe error code is the data.\r\n	System	3109	System	Information
Initialization failed because of an open/create error on the\r\nfile %1. The system error code is the data.\r\n	System	3110	System	Information
An unexpected NetBIOS error occurred.\r\nThe error code is the data.\r\n	System	3111	System	Information
An illegal server message block (SMB) was received.\r\nThe SMB is the data.\r\n	System	3112	System	Information
Initialization failed because the requested service %1\r\ncould not be started.\r\n	System	3113	System	Error
Some entries in the error log were lost because of a buffer\r\noverflow.\r\n	System	3114	System	Error
Initialization parameters controlling resource usage other\r\nthan net buffers are sized so that too much memory is needed.\r\n	System	3120	System	Error
The server cannot increase the size of a memory segment.\r\n	System	3121	System	Error
Initialization failed because account file %1 is either incorrect\r\nor not present.\r\n	System	3122	System	Information
Initialization failed because network %1 was not started.\r\n	System	3123	System	Error
The server failed to start. Either all three chdev\r\nparameters must be zero or all three must be nonzero.\r\n	System	3124	System	Error
A remote API request was halted due to the following\r\ninvalid description string: %1.\r\n	System	3125	System	Error
The network %1 ran out of network control blocks (NCBs).  You may need to increase NCBs\r\nfor this network.  The following information includes the\r\nnumber of NCBs submitted by the server when this error occurred:\r\n	System	3126	System	Error
The server cannot create the %1 mailslot needed to send\r\nthe ReleaseMemory alert message.  The error received is:\r\n	System	3127	System	Information
The server failed to register for the ReleaseMemory alert,\r\nwith recipient %1. The error code from\r\nNetAlertStart is the data.\r\n	System	3128	System	Information
The server cannot update the AT schedule file. The file\r\nis corrupted.\r\n	System	3129	System	Error
The server encountered an error when calling\r\nNetIMakeLMFileName. The error code is the data.\r\n	System	3130	System	Error
Initialization failed because of a system execution failure on\r\npath %1. There is not enough memory to start the process.\r\nThe system error code is the data.\r\n	System	3131	System	Error
Longterm lock of the server buffers failed.\r\nCheck swap disk's free space and restart the system to start the server.\r\n	System	3132	System	Error
The service has stopped due to repeated consecutive\r\noccurrences of a network control block (NCB) error.  The last bad NCB follows\r\nin raw data.\r\n	System	3140	System	Information
The Message server has stopped due to a lock on the\r\nMessage server shared data segment.\r\n	System	3141	System	Error
A file system error occurred while opening or writing to the\r\nsystem message log file %1. Message logging has been\r\nswitched off due to the error. The error code is the data.\r\n	System	3150	System	Error
The DNS server wrote version %1 of zone %2 to file %3.\r\n	DNS Server	3150	DNS	Information
Unable to display message POPUP due to system VIO call error.\r\nThe error code is the data.\r\n	System	3151	System	Error
An illegal server message block (SMB) was received.  The SMB is the data.\r\n	System	3152	System	Error
The workstation information segment is bigger than 64K.\r\nThe size follows, in DWORD format:\r\n	System	3160	System	Error
The workstation was unable to get the name-number of the computer.\r\n	System	3161	System	Error
The workstation could not initialize the Async NetBIOS Thread.\r\nThe error code is the data.\r\n	System	3162	System	Information
The workstation could not open the initial shared segment.\r\nThe error code is the data.\r\n	System	3163	System	Error
The workstation host table is full.\r\n	System	3164	System	Error
A bad mailslot server message block (SMB) was received.  The SMB is the data.\r\n	System	3165	System	Error
The workstation encountered an error while trying to start the user accounts database.\r\nThe error code is the data.\r\n	System	3166	System	Error
The workstation encountered an error while responding to an SSI revalidation request.\r\nThe function code and the error codes are the data.\r\n	System	3167	System	Error
The Alerter service had a problem creating the list of\r\nalert recipients.  The error code is %1.\r\n	System	3170	System	Error
There was an error expanding %1 as a group name. Try\r\nsplitting the group into two or more smaller groups.\r\n	System	3171	System	Error
There was an error sending %2 the alert message -\r\n(\r\n%3 )\r\nThe error code is %1.\r\n	System	3172	System	Error
There was an error in creating or reading the alerter mailslot.\r\nThe error code is %1.\r\n	System	3173	System	Error
The server could not read the AT schedule file.\r\n	System	3174	System	Error
The server found an invalid AT schedule record.\r\n	System	3175	System	Error
The server could not find an AT schedule file so it created one.\r\n	System	3176	System	Information
The server could not access the %1 network with NetBiosOpen.\r\n	System	3177	System	Error
The AT command processor could not run %1.\r\n	System	3178	System	Error
WARNING:  Because of a lazy-write error, drive %1 now\r\ncontains some corrupted data.  The cache is stopped.\r\n	System	3180	System	Error
A defective sector on drive %1 has been replaced (hotfixed).\r\nNo data was lost.  You should run CHKDSK soon to restore full\r\nperformance and replenish the volume's spare sector pool.\r\n\r\nThe hotfix occurred while processing a remote request.\r\n	System	3181	System	Error
A disk error occurred on the HPFS volume in drive %1.\r\nThe error occurred while processing a remote request.\r\n	System	3182	System	Error
The user accounts database (NET.ACC) is corrupted.  The local security\r\nsystem is replacing the corrupted NET.ACC with the backup\r\nmade at %1.\r\nAny updates made to the database after this time are lost.\r\n\r\n	System	3183	System	Error
The user accounts database (NET.ACC) is missing.  The local\r\nsecurity system is restoring the backup database\r\nmade at %1.\r\nAny updates made to the database made after this time are lost.\r\n\r\n	System	3184	System	Error
Local security could not be started because the user accounts database\r\n(NET.ACC) was missing or corrupted, and no usable backup\r\ndatabase was present.\r\n\r\nTHE SYSTEM IS NOT SECURE.\r\n	System	3185	System	Error
Local security could not be started because an error\r\noccurred during initialization. The error code returned is %1.\r\n\r\nTHE SYSTEM IS NOT SECURE.\r\n\r\n	System	3186	System	Error
A NetWksta internal error has occurred:\r\n%1\r\n	System	3190	System	Error
The redirector is out of a resource: %1.\r\n	System	3191	System	Error
A server message block (SMB) error occurred on the connection to %1.\r\nThe SMB header is the data.\r\n	System	3192	System	Error
A virtual circuit error occurred on the session to %1.\r\nThe network control block (NCB) command and return code is the data.\r\n	System	3193	System	Error
Hanging up a stuck session to %1.\r\n	System	3194	System	Error
A network control block (NCB) error occurred (%1).\r\nThe NCB is the data.\r\n	System	3195	System	Error
A write operation to %1 failed.\r\nData may have been lost.\r\n	System	3196	System	Error
Reset of driver %1 failed to complete the network control block (NCB).\r\nThe NCB is the data.\r\n	System	3197	System	Error
The amount of resource %1 requested was more\r\nthan the maximum. The maximum amount was allocated.\r\n	System	3198	System	Error
CollectNbtPerformanceData routine completed successfully\r\n	Application	3199	Perfctrs	Information
CollectATKPerformanceData routine successfully completed.\r\n	Application	3199	Atkctrs	Information
CloseNbtPerformanceData routine entered\r\n	Application	3200	Perfctrs	Information
CloseATKPerformanceData routine entered.\r\n	Application	3200	Atkctrs	Information
The server could not create a thread.\r\nThe THREADS parameter in the CONFIG.SYS file should be increased.\r\n	System	3204	System	Error
The server could not close %1.\r\nThe file is probably corrupted.\r\n	System	3205	System	Error
The replicator cannot update directory %1. It has tree integrity\r\nand is the current directory for some process.\r\n	System	3206	System	Error
The server cannot export directory %1 to client %2.\r\nIt is exported from another server.\r\n	System	3207	System	Error
The replication server could not update directory %2 from the source\r\non %3 due to error %1.\r\n	System	3208	System	Error
Master %1 did not send an update notice for directory %2 at the expected\r\ntime.\r\n	System	3209	System	Error
Failed to authenticate with %2, a Windows NT domain controller for domain %1.\r\n	System	3210	System	Error
The replicator attempted to log on at %2 as %1 and failed.\r\n	System	3211	System	Error
Network error %1 occurred.\r\n	System	3212	System	Error
Replicator limit for files in a directory has been exceeded.\r\n	System	3213	System	Error
Replicator limit for tree depth has been exceeded.\r\n	System	3214	System	Error
Unrecognized message received in mailslot.\r\n	System	3215	System	Error
System error %1 occurred.\r\n	System	3216	System	Error
Cannot log on. User is currently logged on and argument TRYUSER\r\nis set to NO.\r\n	System	3217	System	Error
IMPORT path %1 cannot be found.\r\n	System	3218	System	Error
EXPORT path %1 cannot be found.\r\n	System	3219	System	Error
Replicator failed to update signal file in directory %2 due to\r\n%1 system error.\r\n	System	3220	System	Error
Disk Fault Tolerance Error\r\n\r\n%1\r\n	System	3221	System	Error
Replicator could not access %2\r\non %3 due to system error %1.\r\n	System	3222	System	Error
The primary domain controller for domain %1 has apparently failed.\r\n	System	3223	System	Error
Changing machine account password for account %1 failed with\r\nthe following error: %n%2\r\n	System	3224	System	Error
An error occurred while updating the logon or logoff information for %1.\r\n	System	3225	System	Information
An error occurred while synchronizing with primary domain controller %1\r\n	System	3226	System	Error
The session setup to the Windows NT or Windows 2000 Domain Controller %1 for the domain %2\r\nfailed because %1 does not support signing or sealing the Netlogon\r\nsession.\r\n\r\nEither upgrade the Domain controller or set the RequireSignOrSeal\r\nregist	System	3227	System	Information
A power failure was detected at the server.\r\n	System	3230	System	Error
The UPS service performed server shut down.\r\n	System	3231	System	Information
The UPS service did not complete execution of the\r\nuser specified shut down command file.\r\n	System	3232	System	Information
The UPS driver could not be opened.  The error code is\r\nthe data.\r\n	System	3233	System	Error
Power has been restored.\r\n	System	3234	System	Information
There is a problem with a configuration of user specified\r\nshut down command file.\r\n	System	3235	System	Information
The UPS service failed to execute a user specified shutdown\r\ncommand file %1.  The error code is the data.\r\n	System	3236	System	Information
Initialization failed because of an invalid or missing\r\nparameter in the configuration file %1.\r\n	System	3250	System	Error
Initialization failed because of an invalid line in the\r\nconfiguration file %1. The invalid line is the data.\r\n	System	3251	System	Error
Initialization failed because of an error in the configuration\r\nfile %1.\r\n	System	3252	System	Error
The file %1 has been changed after initialization.\r\nThe boot-block loading was temporarily terminated.\r\n	System	3253	System	Error
The files do not fit to the boot-block configuration\r\nfile %1. Change the BASE and ORG definitions or the order\r\nof the files.\r\n	System	3254	System	Error
Initialization failed because the dynamic-link\r\nlibrary %1 returned an incorrect version number.\r\n	System	3255	System	Error
There was an unrecoverable error in the dynamic-\r\nlink library of the service.\r\n	System	3256	System	Error
The system returned an unexpected error code.\r\nThe error code is the data.\r\n	System	3257	System	Error
The fault-tolerance error log file, LANROOT\\LOGS\\FT.LOG,\r\nis more than 64K.\r\n	System	3258	System	Error
The fault-tolerance error-log file, LANROOT\\LOGS\\FT.LOG, had the\r\nupdate in progress bit set upon opening, which means that the\r\nsystem crashed while working on the error log.\r\n	System	3259	System	Information
%1 %2 %3 %4 %5 %6 %7 %8 %9.\r\n	System	3299	System	Information
ATK counters are requesting Event Log access to close.\r\n	Application	3299	Atkctrs	Information
Remote IPC %0\r\n	System	3301	System	Information
Remote Admin %0\r\n	System	3302	System	Information
Logon server share %0\r\n	System	3303	System	Information
A network error occurred. %0\r\n	System	3304	System	Error
There is not enough memory to start the Workstation service.\r\n	System	3400	System	Error
An error occurred when reading the NETWORKS entry in the LANMAN.INI file.\r\n	System	3401	System	Error
This is an invalid argument: %1.\r\n	System	3402	System	Error
The %1 NETWORKS entry in the LANMAN.INI file has a\r\nsyntax error and will be ignored.\r\n	System	3403	System	Error
There are too many NETWORKS entries in the LANMAN.INI file.\r\n	System	3404	System	Error
An error occurred when opening network\r\ndevice driver %1 = %2.\r\n	System	3406	System	Error
Device driver %1 sent a bad BiosLinkage response.\r\n	System	3407	System	Error
The program cannot be used with this operating system.\r\n	System	3408	System	Error
The redirector is already installed.\r\n	System	3409	System	Information
Installing NETWKSTA.SYS Version %1.%2.%3  (%4)\r\n\r\n	System	3410	System	Information
There was an error installing NETWKSTA.SYS.\r\n\r\nPress ENTER to continue.\r\n	System	3411	System	Error
Resolver linkage problem.\r\n	System	3412	System	Error
Your logon time at %1 ends at %2.\r\nPlease clean up and log off.\r\n	System	3413	System	Error
You will be automatically disconnected at %1.\r\n	System	3414	System	Error
Your logon time at %1 has ended.\r\n	System	3415	System	Error
Your logon time at %1 ended at %2.\r\n	System	3416	System	Error
WARNING: You have until %1 to logoff. If you\r\nhave not logged off at this time, your session will be\r\ndisconnected, and any open files or devices you\r\nhave open may lose data.\r\n	System	3417	System	Error
WARNING: You must log off at %1 now.  You have\r\ntwo minutes to log off, or you will be disconnected.\r\n	System	3418	System	Error
You have open files or devices, and a forced\r\ndisconnection may cause you to lose data.\r\n	System	3419	System	Error
Default Share for Internal Use %0\r\n	System	3420	System	Information
Messenger Service %0\r\n	System	3421	System	Information
The command completed successfully.\r\n	System	3500	System	Information
You used an invalid option.\r\n	System	3501	System	Error
System error %1 has occurred.\r\n	System	3502	System	Error
The command contains an invalid number of arguments.\r\n	System	3503	System	Error
The command completed with one or more errors.\r\n	System	3504	System	Error
You used an option with an invalid value.\r\n	System	3505	System	Error
The option %1 is unknown.\r\n	System	3506	System	Error
Option %1 is ambiguous.\r\n	System	3507	System	Error
A command was used with conflicting switches.\r\n	System	3510	System	Error
Could not find subprogram %1.\r\n	System	3511	System	Error
The software requires a newer version of the operating\r\nsystem.\r\n	System	3512	System	Error
More data is available than can be returned by Windows 2000.\r\n	System	3513	System	Error
More help is available by typing NET HELPMSG %1.\r\n	System	3514	System	Information
This command can be used only on a Windows 2000 Domain Controller.\r\n	System	3515	System	Error
This command cannot be used on a Windows 2000 Domain Controller.\r\n	System	3516	System	Information
These Windows 2000 services are started:\r\n	System	3520	System	Information
The %1 service is not started.\r\n	System	3521	System	Error
The %1 service is starting%0\r\n	System	3522	System	Information
The %1 service could not be started.\r\n	System	3523	System	Error
The %1 service was started successfully.\r\n	System	3524	System	Information
Stopping the Workstation service also stops the Server service.\r\n	System	3525	System	Information
The workstation has open files.\r\n	System	3526	System	Error
The %1 service is stopping%0\r\n	System	3527	System	Information
The %1 service could not be stopped.\r\n	System	3528	System	Error
The %1 service was stopped successfully.\r\n	System	3529	System	Information
The following services are dependent on the %1 service.\r\nStopping the %1 service will also stop these services.\r\n	System	3530	System	Information
The service is starting or stopping.  Please try again later.\r\n	System	3533	System	Information
The service did not report an error.\r\n	System	3534	System	Information
An error occurred controlling the device.\r\n	System	3535	System	Information
The %1 service was continued successfully.\r\n	System	3536	System	Information
The %1 service was paused successfully.\r\n	System	3537	System	Information
The %1 service failed to resume.\r\n	System	3538	System	Error
The %1 service failed to pause.\r\n	System	3539	System	Error
The %1 service continue is pending%0\r\n	System	3540	System	Information
The %1 service pause is pending%0\r\n	System	3541	System	Information
%1 was continued successfully.\r\n	System	3542	System	Information
%1 was paused successfully.\r\n	System	3543	System	Information
The %1 service has been started by another process and is pending.%0\r\n	System	3544	System	Information
A service specific error occurred: %1.\r\n	System	3547	System	Error
These workstations have sessions on this server:\r\n	System	3660	System	Information
These workstations have sessions with open files on this server:\r\n	System	3661	System	Error
The message alias is forwarded.\r\n	System	3666	System	Information
You have these remote connections:\r\n	System	3670	System	Information
Continuing will cancel the connections.\r\n	System	3671	System	Information
The session from %1 has open files.\r\n	System	3675	System	Information
New connections will be remembered.\r\n	System	3676	System	Information
New connections will not be remembered.\r\n	System	3677	System	Information
An error occured while saving your profile. The state of your remembered connections has not changed.\r\n	System	3678	System	Information
An error occured while reading your profile.\r\n	System	3679	System	Information
An error occurred while restoring the connection to %1.\r\n	System	3680	System	Error
No network services are started.\r\n	System	3682	System	Information
There are no entries in the list.\r\n	System	3683	System	Information
Users have open files on %1.  Continuing the operation will force the files closed.\r\n	System	3688	System	Error
The Workstation service is already running. Windows 2000 will ignore command options for the workstation.\r\n	System	3689	System	Information
There are open files and/or incomplete directory searches pending on the connection to %1.\r\n	System	3691	System	Information
The request will be processed at a domain controller for domain %1.\r\n	System	3693	System	Information
The shared queue cannot be deleted while a print job is being spooled to the queue.\r\n	System	3694	System	Error
%1 has a remembered connection to %2.\r\n	System	3695	System	Information
An error occurred while opening the Help file.\r\n	System	3710	System	Error
The Help file is empty.\r\n	System	3711	System	Error
The Help file is corrupted.\r\n	System	3712	System	Error
Could not find a domain controller for domain %1.\r\n	System	3713	System	Error
This operation is privileged on systems with earlier\r\nversions of the software.\r\n	System	3714	System	Error
The device type is unknown.\r\n	System	3716	System	Error
The log file has been corrupted.\r\n	System	3717	System	Error
Program filenames must end with .EXE.\r\n	System	3718	System	Error
A matching share could not be found so nothing was deleted.\r\n	System	3719	System	Error
A bad value is in the units-per-week field of the user record.\r\n	System	3720	System	Error
The password is invalid for %1.\r\n	System	3721	System	Error
An error occurred while sending a message to %1.\r\n	System	3722	System	Error
The password or user name is invalid for %1.\r\n	System	3723	System	Error
An error occurred when the share was deleted.\r\n	System	3725	System	Error
The user name is invalid.\r\n	System	3726	System	Error
The password is invalid.\r\n	System	3727	System	Error
The passwords do not match.\r\n	System	3728	System	Error
Your persistent connections were not all restored.\r\n	System	3729	System	Information
This is not a valid computer name or domain name.\r\n	System	3730	System	Error
Default permissions cannot be set for that resource.\r\n	System	3732	System	Information
A valid password was not entered.\r\n	System	3734	System	Error
A valid name was not entered.\r\n	System	3735	System	Error
The resource named cannot be shared.\r\n	System	3736	System	Information
The permissions string contains invalid permissions.\r\n	System	3737	System	Error
You can only perform this operation on printers and communication devices.\r\n	System	3738	System	Information
%1 is an invalid user or group name.\r\n	System	3742	System	Error
The server is not configured for remote administration.\r\n	System	3743	System	Error
No users have sessions with this server.\r\n	System	3752	System	Information
User %1 is not a member of group %2.\r\n	System	3753	System	Error
User %1 is already a member of group %2.\r\n	System	3754	System	Information
There is no such user: %1.\r\n	System	3755	System	Error
This is an invalid response.\r\n	System	3756	System	Error
No valid response was provided.\r\n	System	3757	System	Error
The destination list provided does not match the destination list of the printer queue.\r\n	System	3758	System	Error
Your password cannot be changed until %1.\r\n	System	3759	System	Error
%1 is not a recognized day of the week.\r\n	System	3760	System	Error
The time range specified ends before it starts.\r\n	System	3761	System	Error
%1 is not a recognized hour.\r\n	System	3762	System	Error
%1 is not a valid specification for minutes.\r\n	System	3763	System	Error
Time supplied is not exactly on the hour.\r\n	System	3764	System	Error
12 and 24 hour time formats may not be mixed.\r\n	System	3765	System	Error
%1 is not a valid 12-hour suffix.\r\n	System	3766	System	Error
An illegal date format has been supplied.\r\n	System	3767	System	Error
An illegal day range has been supplied.\r\n	System	3768	System	Error
An illegal time range has been supplied.\r\n	System	3769	System	Error
Arguments to NET USER are invalid. Check the minimum password\r\nlength and/or arguments supplied.\r\n	System	3770	System	Error
The value for ENABLESCRIPT must be YES.\r\n	System	3771	System	Error
An illegal country code has been supplied.\r\n	System	3773	System	Error
The user was successfully created but could not be added\r\nto the USERS local group.\r\n	System	3774	System	Error
The user context supplied is invalid.\r\n	System	3775	System	Error
The dynamic-link library %1 could not be loaded, or an error\r\noccurred while trying to use it.\r\n	System	3776	System	Error
Sending files is no longer supported.\r\n	System	3777	System	Error
You may not specify paths for ADMIN$ and IPC$ shares.\r\n	System	3778	System	Error
User or group %1 is already a member of local group %2.\r\n	System	3779	System	Information
There is no such user or group: %1.\r\n	System	3780	System	Error
There is no such computer: %1.\r\n	System	3781	System	Error
The computer %1 already exists.\r\n	System	3782	System	Error
There is no such global user or group: %1.\r\n	System	3783	System	Error
Only disk shares can be marked as cacheable\r\n	System	3784	System	Information
The system could not find message: %1.\r\n	System	3790	System	Error
This schedule date is invalid.\r\n	System	3802	System	Error
The LANMAN root directory is unavailable.\r\n	System	3803	System	Error
The SCHED.LOG file could not be opened.\r\n	System	3804	System	Error
The Server service has not been started.\r\n	System	3805	System	Information
The AT job ID does not exist.\r\n	System	3806	System	Error
The AT schedule file is corrupted.\r\n	System	3807	System	Error
The delete failed due to a problem with the AT schedule file.\r\n	System	3808	System	Error
The command line cannot exceed 259 characters.\r\n	System	3809	System	Error
The AT schedule file could not be updated because the disk is full.\r\n	System	3810	System	Error
The AT schedule file is invalid.  Please delete the file and create a new one.\r\n	System	3812	System	Error
The AT schedule file was deleted.\r\n	System	3813	System	Information
The syntax of this command is:\r\n\r\nAT [id] [/DELETE]\r\nAT time [/EVERY:date | /NEXT:date] command\r\n\r\nThe AT command schedules a program command to run at a\r\nlater date and time on a server.  It also displays the\r\nlist of programs and commands	System	3814	System	Information
The AT command has timed-out.\r\nPlease try again later.\r\n	System	3815	System	Error
The minimum password age for user accounts cannot be greater\r\nthan the maximum password age.\r\n	System	3816	System	Error
You have specified a value that is incompatible\r\nwith servers with down-level software. Please specify a lower value.\r\n	System	3817	System	Information
%1 is not a valid computer name.\r\n	System	3870	System	Error
%1 is not a valid Windows 2000 network message number.\r\n	System	3871	System	Error
Message from %1 to %2 on %3\r\n	System	3900	System	Information
**** unexpected end of message ****\r\n	System	3902	System	Information
Press ESC to exit\r\n	System	3905	System	Information
Current time at %1 is %2\r\n	System	3910	System	Information
The current local clock is %1\r\nDo you want to set the local computer's time to match the\r\ntime at %2? %3: %0\r\n	System	3911	System	Information
Could not locate a time-server.\r\n	System	3912	System	Error
Could not find the domain controller for domain %1.\r\n	System	3913	System	Error
Local time (GMT%3) at %1 is %2\r\n	System	3914	System	Information
The user's home directory could not be determined.\r\n	System	3915	System	Error
The user's home directory has not been specified.\r\n	System	3916	System	Error
The name specified for the user's home directory (%1) is not a universal naming convention (UNC) name.\r\n	System	3917	System	Error
Drive %1 is now connected to %2. Your home directory is %3\\%4.\r\n	System	3918	System	Information
Drive %1 is now connected to %2.\r\n	System	3919	System	Information
There are no available drive letters left.\r\n	System	3920	System	Error
%1 is not a valid domain or workgroup name.\r\n	System	3932	System	Error
The current SNTP value is: %1\r\n	System	3935	System	Information
This computer is not currently configured to use a specific SNTP server.\r\n	System	3936	System	Information
This current autoconfigured SNTP value is: %1\r\n	System	3937	System	Information
You specified too many values for the %1 option.\r\n	System	3951	System	Error
You entered an invalid value for the %1 option.\r\n	System	3952	System	Error
The syntax is incorrect.\r\n	System	3953	System	Error
You specified an invalid file number.\r\n	System	3960	System	Error
You specified an invalid print job number.\r\n	System	3961	System	Error
The user or group account specified cannot be found.\r\n	System	3963	System	Error
The user was added but could not be enabled for File and Print\r\nServices for NetWare.\r\n	System	3965	System	Error
File and Print Services for NetWare is not installed.\r\n	System	3966	System	Information
Cannot set user properties for File and Print Services for NetWare.\r\n	System	3967	System	Information
Password for %1 is: %2\r\n	System	3968	System	Information
NetWare compatible logon\r\n	System	3969	System	Information
The DNS server was unable to open Active Directory.  This DNS server\r\nis configured to obtain and use information from the directory for\r\nthis zone and is unable to load the zone without it.  Check that the\r\nActive Directory is functioning properly	DNS Server	4000	DNS	Error
WINS encountered an error while processing the command.\r\n	System	4000	Wins	Error
The TrueImage Interpreter initialization failed.\r\n(Document Name: %1)\r\nProcessing continued\r\n	System	4000	MacPrint	Error
LPD service started successfully.\r\n	System	4000	LPDSVC	Information
OpenTcpIpPerformanceData routine entered\r\n	Application	4000	Perfctrs	Information
The trap size of the requested event log exceeds the maximum length of an SNMP trap.\r\n	Application	4000	EvntAgnt	Warning
Error creating event for log event notification.\r\nReturn code from CreateEvent is %1.\r\n	Application	4001	EvntAgnt	Error
The local WINS can not be deleted.\r\n	System	4001	Wins	Error
TrueImage Interpreter - internal error occurred during job processing. \r\nThe job will not print.\r\n(Document Name: %1)\r\n	System	4001	MacPrint	Error
LPD service stopped successfully.\r\n	System	4001	LPDSVC	Information
Unable to allocate a %2 byte message.\r\n	System	4001	Streams	Warning
NBT Open failed. See NBT error message.\r\n	Application	4001	Perfctrs	Error
Error requesting notification of change in log event %1.\r\nReturn code from ElfChangeNotify is %2.\r\n	Application	4002	EvntAgnt	Error
The importation from the file failed.\r\n	System	4002	Wins	Error
TrueImage Interpreter - internal error occurred during string processing. \r\nThe job will not print.\r\n(Document Name: %1)\r\n	System	4002	MacPrint	Error
%2 message allocations have failed since initialization.\r\n	System	4002	Streams	Warning
NBT Open succeeded.\r\n	Application	4002	Perfctrs	Information
Error waiting on event array in log processing event routine.\r\nReturn code from WaitForMultipleObjects is %1.\r\nExtension agent is terminating.\r\n	Application	4003	EvntAgnt	Error
The backup failed. Was a full backup done before?\r\n	System	4003	Wins	Error
A TrueImage Interpreter frame buffer memory allocation failed.\r\n(Document Name: %1)\r\n	System	4003	MacPrint	Error
Unable to allocate a %2 byte external message.\r\n	System	4003	Streams	Warning
DSIS open failed. See DSIS error message\r\n	Application	4003	Perfctrs	Error
Error closing an event log wait event handle.\r\nEvent handle is %1. Return code from CloseHandle is %2.\r\n	Application	4004	EvntAgnt	Error
The backup failed. Check the directory to which you are backing the database.\r\n	System	4004	Wins	Error
A TrueImage Interpreter error occurred for which no error string is defined.\r\n(Document Name: %1), Error Code: %2\r\n	System	4004	MacPrint	Error
%2 external message allocations have failed since initialization.\r\n	System	4004	Streams	Warning
DSIS Open succeeded.\r\n	Application	4004	Perfctrs	Information
The name does not exist in the WINS database.\r\n	System	4005	Wins	Error
Load of INETMIB1.DLL failed. Make sure the DLL file is in the PATH. WIN32 Error number is returned in the data.\r\n	Application	4005	Perfctrs	Error
The handle passed to the TrueImage Interpreter loggin routine is invalid.\r\n	System	4005	MacPrint	Error
Error allocating memory for event log buffer.\r\nTrap will not be sent.\r\n	Application	4005	EvntAgnt	Warning
Replication with a nonconfigured partner is not allowed.\r\n	System	4006	Wins	Error
Unable to look up address of SnmpMgrStrToOid routine in the MGMTAPI.DLL library. WIN32 Error number is returned in the data.\r\n	Application	4006	Perfctrs	Error
The TrueImage Interpreter was unable to create a required device context.\r\nThe error code returned from the system was %1.\r\n	System	4006	MacPrint	Error
Unable to look up address of an SNMP Extension routine in the INETMIB1.DLL library. WIN32 Error number is returned in the data.\r\n	Application	4007	Perfctrs	Error
The TrueImage Interpreter was unable to start printing the document.\r\nThe error code returned from the system was %1.\r\n	System	4007	MacPrint	Error
Unable to look up ID of this object in MIB. Check for correct MIB.BIN file.\r\n	Application	4008	Perfctrs	Error
The TrueImage Interpreter was unable to retrieve the default printer\r\ncharacteristics. The error code returned from the system was %1.\r\n	System	4008	MacPrint	Error
The TCP data Bindings array has been initialized\r\n	Application	4009	Perfctrs	Information
The TrueImage Interpreter was unable to allocate memory.\r\n	System	4009	MacPrint	Error
Unable to get the Local Computer name. GetLastError code in data.\r\n	Application	4010	Perfctrs	Error
The TrueImage Interpreter was unable to generate the Error Page. The\r\nerror code returned from the system was %1.\r\n	System	4010	MacPrint	Error
Unable to open the Snmp Mgr interface for the specified computer. GetLastError code returned in data. \r\n	Application	4011	Perfctrs	Error
The TrueImage Interpreter was unable to retrieve data from the print\r\nspooler. The error code returned from the system was %1.\r\n	System	4011	MacPrint	Error
Unable to create an event for subsequent SNMP calls. NtStatus and WIN32 Error are returned in the data.\r\n	Application	4012	Perfctrs	Error
The TrueImage Interpreter was unable to render the print job.\r\nThe error code returned from the system was %1.\r\n	System	4012	MacPrint	Error
The TrueImage Interpreter was unable to initialize the required information to begin processing the job.\r\nThe error code returned from the system was %1.\r\n	System	4013	MacPrint	Error
The TrueImage Interpreter was unable to query the font list correctly to begin processing the job.\r\n	System	4014	MacPrint	Error
The TrueImage Interpreter has reached its limit for internal fonts. No more\r\nfonts can be defined.\r\n	System	4015	MacPrint	Error
The TrueImage Interpreter failed to allocate memory required to process a job. The job will not print.\r\n	System	4016	MacPrint	Error
Not used\r\nA Macintosh workstation has submitted a print job.  The Macintosh Owner Name\r\nis  %1.\r\n	System	4017	MacPrint	Information
Not used\r\nA Macintosh workstation has submitted a print job. The Macintosh Owner\r\nName is not available.\r\n	System	4018	MacPrint	Information
The TrueImage Interpreter was unable to reset page-level information, such\r\nas paper size or number of copies. The job printing may not be correct.\r\nThe error code returned from the system was %1.\r\n	System	4019	MacPrint	Warning
The TrueImage Interpreter was unable to set its priority correctly.\r\nThe error code returned from the system was %1.\r\n	System	4020	MacPrint	Warning
The TrueImage Interpreter process was unable to start succesfully.\r\nThe error code returned from the system was %1.\r\n	System	4021	MacPrint	Error
The TrueImage Interpreter was unable to set the correct security privilege\r\nand cannot print the job. The error code returned from the system was %1.\r\n	System	4022	MacPrint	Error
status: idle\r\n	System	4023	MacPrint	Information
The printer %1 could not be registered on the AppleTalk network.\r\n	System	4024	MacPrint	Error
The printer %1 could not be registered because another printer by the same name\r\nalready exists on this AppleTalk network.\r\n	System	4025	MacPrint	Error
Not more than 127 printers can be shared out by the MacPrint service.\r\nPlease enable printer sharing on not more than 127 printers connected to the\r\nWindows 2000 server. Otherwise, printer jobs will be lost and shared printers \r\nmay not be able to b	System	4026	MacPrint	Error
WINS has initialized its log for this invocation.\r\n	System	4096	Wins	Information
The application, %1!s!, generated an application error\r\nThe error occurred on %2!s!/%3!s!/%4!s! @ %5!s!:%6!s!:%7!s!.%8!s!\r\nThe exception generated was %9!s! at address %10!s! (%11!s!)\r\n	Application	4097	DrWatson	Information
Initialization/Termination\r\n	Application	4097	Fax Service	Success
MS DTC has started.%0\r\n	Application	4097	MSDTC	Information
The CI service has successfully started.\r\n	Application	4097	Ci	Information
WINS initialized properly and is now fully operational.\r\n	System	4097	Wins	Information
Outbound\r\n	Application	4098	Fax Service	Success
The CI service has been shutdown.\r\n	Application	4098	Ci	Information
WINS was terminated by the service controller. WINS will gracefully terminate.\r\n	System	4098	Wins	Information
Inbound\r\n	Application	4099	Fax Service	Success
OpenTcpIpPerformanceData routine completed successfully.\r\n	Application	4099	Perfctrs	Information
WINS is being gracefully terminated by the administrator. The address of the administrator is %1.\r\n	System	4099	Wins	Information
The CI daemon was hung and subsequently restarted.	Application	4099	Ci	Warning
Unable to create device object %2. Initialization failed.\r\n	System	4100	Tcpip	Error
Unknown\r\n	Application	4100	Fax Service	Success
CollectTcpIpPerformanceData routine entered.\r\n	Application	4100	Perfctrs	Information
The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.\r\n	System	4100	DHCP	Error
WINS is being abruptly terminated by the administrator. The address of the administrator is %1.\r\n	System	4100	Wins	Information
Unable to allocate required resources. Initialization failed.\r\n	System	4101	Tcpip	Error
Request for data from a DSIS foreign computer received.\r\n	Application	4101	Perfctrs	Information
The content index filter for file &quot;%1&quot; generated content data more than %2\r\n times the file's size.\r\n	Application	4101	Ci	Warning
WINS received a Name Request with an invalid operation code. The request is being thrown away.\r\n	System	4101	Wins	Information
The CollectDsisPerformanceData routine returned an error.\r\n	Application	4102	Perfctrs	Error
Master merge has started on %1.\r\n	Application	4102	Ci	Information
The connection was aborted by the remote WINS. Remote WINS may not be configured to replicate with the server.\r\n	System	4102	Wins	Information
No objects were returned by the foreign computer.\r\n	Application	4103	Perfctrs	Warning
Master merge has completed on %2.\r\n	Application	4103	Ci	Information
***There are no records in the registry for the key.\r\n	System	4103	Wins	Information
Information from the foriegn computer was retrieved successfully\r\n	Application	4104	Perfctrs	Information
The Microsoft Distributed Transaction Coordinator service was successfully installed.%0\r\n	Application	4104	MSDTC	Information
Master merge has been paused on %2 due to error %3.\r\nIt will be rescheduled later.\r\n	Application	4104	Ci	Error
The CRM log file was originally created on a computer with a different name. It has been updated with the name of the current computer. If this warning appears when the computer name has been changed then no further action is required. %1%0\r\n	Application	4104	COM+	Warning
***There are no pull records.\r\n	System	4104	Wins	Error
CollectNbtPerformanceData routine returned an error.\r\n	Application	4105	Perfctrs	Error
Master merge cannot be started on %2 due to error %3.\r\n	Application	4105	Ci	Error
***There are no push records.\r\n	System	4105	Wins	Error
No SNMP Mgr Session was established in the OpenTcpIpPerformanceData routine.\r\n	Application	4106	Perfctrs	Warning
Master merge cannot be re-started on %2 due to error %3.\r\n	Application	4106	Ci	Error
The WINS database of name-to-address mappings is empty. It could mean that a\r\nprevious invocation of WINS created the database and then went down before\r\nany registration could be done.\r\n	System	4106	Wins	Error
Insufficient memory was available to allocate an SNMP request buffer.\r\n	Application	4107	Perfctrs	Error
The content index could not filter file %2.  The filter operation was retried\r\n %3 times without success.\r\n	Application	4107	Ci	Error
The WINS database of owner-to-address mappings is empty. It could mean that\r\na previous invocation of WINS created the table and then went down before\r\nits own entry could be added. The WINS server went down very fast\r\n(even before all its threads c	System	4107	Wins	Error
SnmpMgrRequest call requesting the TCP, IP, UDP and Interface Counters returned an error. ErrorStatus and ErrorIndex values are shown in Data.\r\n	Application	4108	Perfctrs	Error
Master merge was started on %2 because the size of the shadow indexes\r\n is more than %3% of the disk.\r\n	Application	4108	Ci	Information
***WINS could not read the InitTimeReplication field of the pull/push key.\r\n	System	4108	Wins	Error
SnmpMgrRequest call requesting the Net Interface Counters returned an error. ErrorStatus and ErrorIndex values are shown in Data.\r\n	Application	4109	Perfctrs	Error
Master merge was started on %2 because more than %3 documents have changed\r\nsince the last master merge.\r\n	Application	4109	Ci	Information
WINS could not read the Refresh interval from the registry\r\n	System	4109	Wins	Information
SnmpMgrRequest call requesting ICMP Counters returned an error. ErrorStatus and ErrorIndex values are shown in Data.\r\n	Application	4110	Perfctrs	Error
Master merge was started on %2 because the amount of remaining disk\r\n space was less than %3%.\r\n	Application	4110	Ci	Information
WINS could not read the Tombstone interval from the registry\r\n	System	4110	Wins	Information
Processing NetInterface entries.\r\n	Application	4111	Perfctrs	Information
The MS DTC service is stopping.%0\r\n	Application	4111	MSDTC	Information
The NTFS filter service failed with error code %1.\r\n	Application	4111	Ci	Error
WINS could not read the Verify interval from the registry\r\n	System	4111	Wins	Information
Not enough room in buffer to store Network Interface data. Available and\r\nrequired buffer size is returned in data.\r\n	Application	4112	Perfctrs	Warning
The filter service could not run since file %1 could not be found on your\r\n system.\r\n	Application	4112	Ci	Error
***WINS could not read the retry count for retrying communication with a remote WINS.\r\n	System	4112	Wins	Error
Error returned by SnmpGet (GETNEXT) request while processing Net Interface instances. ErrorStatus and ErrorIndex\r\nreturned in Data.\r\n	Application	4113	Perfctrs	Error
An error has been detected on %2 which requires a full content scan.\r\n	Application	4113	Ci	Information
WINS could not read the Tombstone Timeout from the registry.\r\n	System	4113	Wins	Information
Copying data from network requests to perfmon buffer.\r\n	Application	4114	Perfctrs	Information
An error has been detected on %2 which requires a partial content scan.\r\n	Application	4114	Ci	Information
WINS could not read the ConsistencyCheck value (type DWORD) from the\r\nParameters\\ConsistencyCheck subkey in the registry. The first consistency \r\ncheck is done at the time specified in the SpTime entry under the \r\nConsistencyCheck subkey and is lim	System	4114	Wins	Information
No Network InterfaceData found.\r\n	Application	4115	Perfctrs	Information
A full content scan has started on %2.\r\n	Application	4115	Ci	Information
WINS could not read the MaxRecsAtATime value (type DWORD) in the\r\nWins\\Parameters\\ConsistencyCheck subkey of the registry. Set this value \r\nif you do not want WINS to replicate more than a set number of records in \r\none cycle while doing periodic	System	4115	Wins	Information
Not enough room in buffer to store Network Protocol (IP, ICMP, TCP & UDP) data. Available and required buffer size is returned in data.\r\n	Application	4116	Perfctrs	Warning
A partial content scan has started on %2.\r\n	Application	4116	Ci	Information
WINS could not read the UseRplPnrs value of the Wins\\Parameters\\ConsistencyCheck \r\nkey. If this value is set to a non-zero (DWORD) value, WINS will do a \r\nconsistency check of the owners in its database by going to one or more of \r\nits replication	System	4116	Wins	Information
Data contains return value of WSAIsBlocking() call just before call to SnmpMgrRequest(ASN_RFC1157_GETREQUEST) was made.\r\n	Application	4117	Perfctrs	Information
A content scan has completed on %2.\r\n	Application	4117	Ci	Information
WINS just did a consistency check on the records owned by the WINS with the address, %1.\r\nThe number of records inserted, updated, and deleted are in the data section\r\n(second, third, fourth DWORDS).\r\n	System	4117	Wins	Information
SNMP socket is busy. Subsequent calls to SNMP services may fail.\r\n	Application	4118	Perfctrs	Warning
A content scan could not be completed on %1.\r\n	Application	4118	Ci	Information
WINS could not do a consistency check on the records. This could be because WINS\r\nwas directed to do the consistency check only with replication partners and\r\nit currently does not have any pull replication partners. To get around this\r\nproblem, you	System	4118	Wins	Information
A NULL ICMP data buffer was returned by SNMP. No ICMP data will be returned. This may be caused by a problem with the SNMP service. \r\n	Application	4119	Perfctrs	Warning
One or more embedded files in file %1 could not be filtered.\r\n	Application	4119	Ci	Warning
Invalid CiCodepage was specified.\r\n	Application	4119	Ci	Error
***WINS received a packet that has the wrong format. For example, a label may be \r\nMore than 63 octets.\r\n	System	4119	Wins	Information
A NULL TCP data buffer was returned by SNMP. No ICMP data will be returned. This may be caused by a problem with the SNMP service. \r\n	Application	4120	Perfctrs	Warning
Class for extension %1 unknown.  Sample\r\nfile: %2\r\n	Application	4120	Ci	Information
The content index is corrupt. A content scan will to be scheduled after chkdsk or autochk is run.\r\n	Application	4120	Ci	Error
***No records meeting the %1 criteria were found in the WINS database.\r\n	System	4120	Wins	Information
A NULL buffer was returned by SNMP in response to a request for Network performance information. this may indicate a problem with the SNMP service.\r\n	Application	4121	Perfctrs	Warning
Master merge has restarted on %2.\r\n	Application	4121	Ci	Information
The content index is corrupt.\r\n	Application	4121	Ci	Error
WINS could not find any records in the WINS database.\r\nThis means there are no active or tombstone records in the database.\r\nIt could be that the records being requested by a remote WINS server have\r\neither been released or do not exist.\r\n	System	4121	Wins	Information
The CI filter daemon has prematurely terminated and will be and subsequently\r\n restarted.\r\n	Application	4122	Ci	Warning
The content index meta data is corrupt.\r\n	Application	4122	Ci	Error
***The special group has reached its limit. WINS cannot add any more members.\r\n	System	4122	Wins	Error
Content index metadata on drive %2 is corrupt.  Index will be automatically\r\n restored. Running chkdsk /f is recommended.\r\n	Application	4123	Ci	Warning
The content index partition is invalid.\r\n	Application	4123	Ci	Error
***The address database already has reached the limit of owners. This is 100.\r\nThis error was noticed while attempting to add the address given in the data section.\r\n	System	4123	Wins	Error
Content index on %1 is corrupt. Please shutdown and restart\r\nthe Indexing Service (cisvc).\r\n	Application	4124	Ci	Warning
The priority is invalid.\r\n	Application	4124	Ci	Error
The WINS server received an update notification from the non-configured WINS \r\nserver at the address, %1. The WINS server rejected it. This means the remote\r\nWINS server is not in the list of Push partners (WINS servers under the Pull \r\nkey) and the	System	4124	Wins	Information
Content index corruption detected in component %1.\r\nStack trace is %2.\r\n	Application	4125	Ci	Information
There is no starting key.\r\n	Application	4125	Ci	Error
WINS received an update notification from the WINS with the address, %1. \r\nWINS accepted it.\r\n	System	4125	Wins	Error
Cleaning up corrupt content index metadata on %1. Index will\r\n be automatically restored by refiltering all documents.\r\n	Application	4126	Ci	Warning
The content index is out of index ids.\r\n	Application	4126	Ci	Error
The WINS server received a pull request from the non-configured WINS server \r\nwith the address, %1. The WINS server rejected it since the remote WINS server \r\nis not in the list of Pull partners (WINS servers under the Pull key) and the \r\nadministra	System	4126	Wins	Information
Error %1 detected in content index on %2.\r\n	Application	4127	Ci	Warning
There is no catalog.\r\n	Application	4127	Ci	Error
The datafiles key could not be opened.\r\n	System	4127	Wins	Information
Content index on %1 could not be initialized. Error %2.\r\n	Application	4128	Ci	Warning
The NetBios over TCP/IP (NetBT) key could not be opened.\r\n	System	4128	Wins	Information
Recovery is starting on PropertyStore in catalog %1.\r\n	Application	4129	Ci	Information
The NetBios over TCP/IP (NetBT) key could not be queried.\r\n	System	4129	Wins	Information
Recovery was performed successfully on PropertyStore in catalog %1.\r\n	Application	4130	Ci	Information
A worker thread was created by the administrator.\r\n	System	4130	Wins	Information
PropertyStore inconsistency detected in catalog %1.\r\n	Application	4131	Ci	Information
A worker thread was terminated by the administrator.\r\n	System	4131	Wins	Information
%1 inconsistencies were detected in PropertyStore during recovery of catalog %2.\r\n	Application	4132	Ci	Warning
The owner-address mapping table had an entry with a non-zero owner ID and \r\nan address the same as the local WINS address. The entry has been marked as \r\ndeleted in the in-memory table.\r\n	System	4132	Wins	Information
Very low disk space was detected on drive %1. Please free up at least %2MB of\r\nspace for content index to continue.\r\n	Application	4133	Ci	Warning
File change notifications are turned off for scope %1 because of error %2. This\r\nscope will be periodically scanned.\r\n	Application	4133	Ci	Error
An error occurred while trying to inform a remote WINS to update\r\nthe version number.\r\n	System	4133	Wins	Information
The local WINS is going to inform a remote WINS to update the version number of\r\na record. This is because the local WINS encountered a conflict between an \r\nactive owned name and an active replica that it pulled from a replication \r\npartner.\r\n	System	4134	Wins	Information
File change notifications for scope %1 are not enabled because of error %2. This scope will be\r\nperiodically scanned.\r\n	Application	4135	Ci	Error
The local WINS has been informed by a remote WINS with address, %1, to update\r\nthe version number of a record. This is because the remote WINS encountered a \r\nconflict between an active owned name and an active replica that it pulled from \r\na replic	System	4135	Wins	Error
%1 failed to logon %2 because of error %3.\r\n	Application	4136	Ci	Error
A remote WINS requested the update of the version stamp of a record, but the \r\nrecord could not be found. Check to see if the record was deleted or updated.\r\n	System	4136	Wins	Error
CI has started for catalog %1.\r\n	Application	4137	Ci	Information
***A name mismatch was noticed while verifying the validity of old replicas.\r\nThe local record has the name %1 while the replica pulled in from the WINS\r\nthat owns this record has the name %2.  This could mean that the remote\r\nWINS was brought down	System	4137	Wins	Error
The value of the version ID counter was changed. The new value (Low 32 bits) is given in the data section.\r\n	System	4138	Wins	Information
Content index corruption detected in component %2 in catalog %3.\r\nStack trace is %4.\r\n	Application	4138	Ci	Information
The WINS replication request is being ignored since WINS suspects that the\r\nWins\\Partners key information has changed (because it received a notification \r\nFrom the registry) which makes the current request pertaining to the partner out \r\nof date.\	System	4139	Wins	Error
The path %1 is too long for Content Index.\r\n	Application	4139	Ci	Error
WINS is deleting all records of the WINS with owner ID, %d. This owner ID\r\ncorresponds to the address, %s.\r\n	System	4140	Wins	Information
Notifications are not enabled on %1 because this is a Dfs-aware share.\r\nThis scope will be periodically scanned.\r\n	Application	4140	Ci	Information
WINS pulled records from a WINS while doing %1. The partner's address and \r\nthe owner's address whose records were pulled are given in the data section\r\n(second and third DWORD respectively). The number of records pulled is the\r\nfourth DWORD.\r\n	System	4141	Wins	Information
Please check your system time.\r\nIt might be set to an invalid value.\r\n	Application	4141	Ci	Error
WINS performed a consistency check on the records. The number of records pulled, \r\nThe address of the WINS whose records were pulled, and the address of the WINS\r\nfrom which these records were pulled are given in the second, third, and fourth \r\nDWOR	System	4142	Wins	Information
Added virtual root %1 to index. Mapped to %2.\r\n	Application	4142	Ci	Information
WINS scavenged its records in the WINS database. The number of records scavenged \r\nis given in the data section.\r\n	System	4143	Wins	Information
Removed virtual root %1 from index.\r\n	Application	4143	Ci	Information
WINS scavenged replica tombstones in the WINS database. The number of records \r\nScavenged is given in the data section.\r\n	System	4144	Wins	Information
Added scope %1 to index.\r\n	Application	4144	Ci	Information
***WINS revalidated old active replicas in the WINS database.\r\n	System	4145	Wins	Error
Removed scope %1 from index.\r\n	Application	4145	Ci	Information
WINS Performance Monitor Counters is closing the event log.\r\n	System	4146	Wins	Error
Account %1 does not have interactive logon privilege on this computer.\r\nYou can give %1 interactive logon privilege on this computer using the\r\nuser manager administrative tool.\r\n	Application	4146	Ci	Error
WINS has deleted records of a partner. The internal ID of the partner whose\r\nrecords were deleted, the minimum version number (low word, high word), and\r\nthe maximum version number (low word, high word) of the records deleted\r\nare given in the data	System	4147	Wins	Information
The IISADMIN service is not available, so virtual roots cannot be indexed.\r\n	Application	4147	Ci	Error
Delete of file &quot;%1&quot; caused a rescan because it was potentially a short filename.\r\nAvoid use of names with the character "~" in them or disable "8 DOT 3" name creation.\r\n	Application	4148	Ci	Warning
The local WINS server received a request from a remote WINS server that is not the same version. Because the WINS servers are not compatible, the connection was terminated. The version number of the remote WINS server is given in the data section.	System	4148	Wins	Warning
Read of USN log for NTFS volume %1 failed with error code %2.  Volume will remain\r\noffline until the Indexing Service (cisvc) is restarted.\r\n	Application	4149	Ci	Warning
Winsock Send could not send all the bytes. The connection could have been aborted by the remote client.	System	4149	Wins	Warning
WINS adjusted the scavenging related time interval, %1, so that it is compatible with the replication time intervals. The adjusted value for this scavenging parameter is given in the data section (second DWORD). This value was computed by WINS using an al	System	4150	Wins	Warning
The CI service attempted to startup but was suppressed because the DonotStartCiSvc registry\r\nparameter was set.\r\n	Application	4150	Ci	Information
WINS adjusted the scavenging related time interval, %1. The adjusted value for this scavenging parameter is given in the data section (second DWORD). This value was computed by WINS using an algorithm that tries to achieve a good balance between consisten	System	4151	Wins	Warning
The MaxCatalogs limit has been reached, so the catalog in %1 can't be opened.\r\n	Application	4151	Ci	Warning
The timeout period has expired on a call to another WINS server. Assuming that the network and routers are working properly, either the remote WINS server is overloaded, or its TCP listener thread has terminated.	System	4152	Wins	Warning
***The Scavenger thread found active replicas that needed to be verified with the owner WINS server since they were older than the verify time interval. The table of owner-to-address mappings indicated the WINS was not active.	System	4153	Wins	Warning
The name registration packet that was just received has too many addresses. The maximum number of addresses for a multi-homed client is 25. The number of addresses found in the packet is given in the data section.	System	4154	Wins	Warning
A replica clashed with the static record, %1, in the WINS database. The replica was rejected.	System	4155	Wins	Warning
WINS could not initialize the administrator interface because of a problem with the Remote Procedure Call (RPC) service. You may not be able to administer WINS. Make sure that the RPC service is running.	System	4156	Wins	Warning
WINS did not send a notification message to the WINS server whose address is given in the data section. There were a number of communications failures with that server in the past few minutes.	System	4157	Wins	Warning
WINS received a release for the non-owned name, %1. This name is owned by the WINS whose owner ID is given in the data section. Run winscl.exe to get the owner ID to address mapping.	System	4158	Wins	Warning
The administrator deleted a record with the name, %1.	System	4159	Wins	Warning
WINS could not start because of a database error. WINS restored the old database from the backup directory and will come up using this database.	System	4160	Wins	Warning
A non-zero replication type applies for this partner. This means only a subset of records will be replicated between the local WINS and this partner. If later you want to get records that did not replicate, you can either pull them using winscl.exe in t	System	4161	Wins	Warning
***A partner has requested only a subset of records. This means we won't replicate all the records in the range requested.  Check the partner's registry to see what replication type applies to it. The partner's address is given in the second DWORD of th	System	4162	Wins	Warning
WINS adjusted the Maximum Records at a time parameter of the ConsistencyCheck key. The value specified, %2, was changed to the minimum value, %1. These are the maximum number of records that will be replicated at any one time for a consistency check.	System	4163	Wins	Warning
WINS was forced to scavenge replica tombstones of a WINS. The person with \r\nadministrative rights on the computer forced the scavenging using winscl.exe. \r\n\r\nWINS does not scavenge replica tombstones unless they have timed out and the \r\nWINS has b	System	4164	Wins	Information
WINS has encountered an error that caused it to shut down.	System	4165	Wins	Error
The replication Pull thread is shutting down due to an error. Restart WINS.	System	4166	Wins	Error
The replication Push thread is shutting down due to an error. Restart WINS.	System	4167	Wins	Error
The Name Challenge thread is shutting down due to an error. Restart WINS.	System	4168	Wins	Error
The worker thread is shutting down due to an error. Restart WINS.	System	4169	Wins	Error
An abnormal error occurred during the WINS initialization. Check the \r\napplication and system logs for information on the cause. WINS may need \r\nto be restarted.\r\n	System	4170	Wins	Error
WINS could not properly set up the WINS database. Look at the application log \r\nfor errors from the Exchange component, ESENT.\r\n	System	4171	Wins	Error
A worker thread could not be created. The computer may be low on resources.\r\n	System	4172	Wins	Error
A thread could not be created. The computer may be low on resources.\r\n	System	4173	Wins	Error
An event could not be created.	System	4174	Wins	Error
***The Name Challenge Request thread could not be created.	System	4175	Wins	Error
A registry key could not be created or opened.	System	4176	Wins	Error
The WINS configuration key could not be created or opened. Check to see if the permissions on the key are set properly, system resources are low, or the registry is having a problem.	System	4177	Wins	Error
The WINS Pull configuration key could not be created or opened. Check to see if the permissions on the key are set properly, system resources are low, or the registry is having a problem.	System	4178	Wins	Error
The WINS Push configuration key could not be created or opened. Check to see \r\nif the permissions on the key are set properly, system resources are low, or \r\nthe registry is having a problem.	System	4179	Wins	Error
The WINS\Parameters key could not be created or opened. Check to see if the permissions on the key are set properly, system resources are low, or the registry is having a problem.	System	4180	Wins	Error
The WINS\Parameters\ConsistencyCheck subkey could not be created or opened. This key should be there if you want WINS to do consistency checks on its database periodically. NOTE: Consistency checks have the potential of consuming large amounts of netw	System	4181	Wins	Error
The registry change notification event could not be created. Check to see if system resources are low.	System	4182	Wins	Error
The correct time format is hh:mm:ss. Check the value of SpTime in the registry.	System	4183	Wins	Error
The registry notification function returned an error.	System	4184	Wins	Error
IP has been bound to more than the maximum number of supported interfaces.\r\nSome interfaces on adapter %2 will not be initialized.\r\n	System	4185	Tcpip	Error
***The Name Registration Response could not be sent due to an error. This error was encountered by a NetBT request thread.	System	4185	Wins	Error
No subnet mask was specified for interface %2. This interface and\r\nall subsequent interfaces on adapter %3 cannot be initialized.\r\n	System	4186	Tcpip	Error
***The Name Registration Response could not be sent due to an error. This\r\nerror was encountered by a RPL thread.\r\n	System	4186	Wins	Error
Invalid address %2 was specified for adapter %3. This interface\r\ncannot be initialized.\r\n	System	4187	Tcpip	Error
The Name Registration Response could not be sent due to an error. This error was encountered by the Name Challenge Thread.	System	4187	Wins	Error
Invalid subnet mask %2 was specified for address %3 on adapter %4.\r\nThis interface cannot be initialized.\r\n	System	4188	Tcpip	Error
The Name Release Response could not be sent due to an error. This error is often caused by a problem with the NetBIOS over TCP/IP (NetBT) interface.	System	4188	Wins	Error
IP could not allocate some resources required to configure adapter %2.\r\nSome interfaces on this adapter will not be initialized.\r\n	System	4189	Tcpip	Error
The Name Query Response could not be sent due to an error. This error is often caused by a problem with the NetBIOS over TCP/IP (NetBT) interface.	System	4189	Wins	Error
IP was unable to initialize adapter %2 for configuration by DHCP.\r\nIf DHCP is enabled on this adapter, the primary interface may not be\r\nconfigured properly. Interfaces on this adapter not configured by\r\nDHCP will be unaffected.\r\n	System	4190	Tcpip	Warning
A record could not be registered because it already existed. However, the same record then could not be found. The WINS database might be corrupt. Check the application log for the Exchange component, ESENT.	System	4190	Wins	Error
IP could not open the registry key for adapter %2.\r\nInterfaces on this adapter will not be initialized.\r\n	System	4191	Tcpip	Error
WINS could not create a heap because of a resource shortage. Check to see if the computer is running short of virtual memory.	System	4191	Wins	Error
Invalid default gateway address %2 was specified for adapter %3.\r\nSome remote networks may not be reachable as a result.\r\n	System	4192	Tcpip	Warning
An error occurred from which WINS will try to recover. If the recovery fails, check previous event log entries to determine what prevented a successful recovery. Take the appropriate action to solve the error that prevented recovery.	System	4192	Wins	Error
Unable to read the configured IP addresses for adapter %2.\r\nIP interfaces will not be initialized on this adapter.\r\n	System	4193	Tcpip	Error
WINS could not create the notification socket. Make sure the TCP/IP driver is installed and running properly.	System	4193	Wins	Error
Unable to read the configured subnet masks for adapter %2.\r\nIP interfaces will not be initialized on this adapter.\r\n	System	4194	Tcpip	Error
WINS could not create the User Datagram Protocol (UDP) socket to listen for Connection notification messages sent by another Pull thread in the local WINS.	System	4194	Wins	Error
IP was unable to read its bindings from the registry. No network interfaces\r\nwere configured.\r\n	System	4195	Tcpip	Error
WINS could not create the TCP socket for listening to TCP connections. Make sure the TCP/IP driver is installed and running properly.	System	4195	Wins	Error
Initialization of IP failed.\r\n	System	4196	Tcpip	Error
WINS could not create the TCP socket for making a TCP connection. Make sure the TCP/IP stack is installed and running properly.	System	4196	Wins	Error
More than the maximum number of default gateways were specified for\r\nadapter %2. Some remote networks may not be reachable as a result.\r\n	System	4197	Tcpip	Warning
An address could not bind to a socket. Make sure the TCP/IP stack is installed and running properly. This event might mean that the 'nameserver' port (specified in the services file) which is used as the default by WINS for replication and discovering	System	4197	Wins	Error
The system detected an address conflict for IP address %2 with the system\r\nhaving network hardware address %3. The local interface has been disabled.\r\n	System	4198	Tcpip	Error
WINS could not listen on the Winsock socket.	System	4198	Wins	Error
The system detected an address conflict for IP address %2 with the system\r\nhaving network hardware address %3. Network operations on this system may\r\nbe disrupted as a result.\r\n	System	4199	Tcpip	Error
CollectTcpIpPerformanceData completed successfully.\r\n	Application	4199	Perfctrs	Information
Winsock Select returned with an error.\r\n	System	4199	Wins	Error
Unable to read or write the NTE Context list for adapter %2.\r\nIP interfaces on this adapter may not be initialized completely.\r\n	System	4200	Tcpip	Error
CloseTcpIpPerformanceData routine entered.\r\n	Application	4200	Perfctrs	Information
The GUID passed was not recognized as valid by a WMI data provider.\r\n	System	4200	WMI	Error
Failed to initialize the MS DTC TIP Gateway. \r\nMS DTC is being started but the TIP feature will be disabled.%0\r\n	Application	4200	MSDTC	Warning
***%1 returned with an error code of %2.	System	4200	Wins	Error
The instance name passed was not recognized as valid by a WMI data provider.\r\n	System	4201	WMI	Error
Error returned by SNMP while trying to close session.\r\n	Application	4201	Perfctrs	Error
The system detected that network adapter %2 was connected to the network,\r\nand has initiated normal operation over the network adapter.\r\n	System	4201	Tcpip	Information
WINS created a socket and called the 'bind' WinSock API to bind a handle to it. On calling 'getsockname' to determine the address bound, WINS received an error.	System	4201	Wins	Error
The data item ID passed was not recognized as valid by a WMI data provider.\r\n	System	4202	WMI	Error
The system detected that network adapter %2 was disconnected from the network,\r\nand the adapter's network configuration has been released. If the network\r\nadapter was not disconnected, this may indicate that it has malfunctioned.\r\nPlease contact you	System	4202	Tcpip	Information
An attempt to connect to the remote WINS server with address %1 returned with\r\nan error. Check to see that the remote WINS server is running and available,\r\nand that WINS is running on that server.\r\n	System	4202	Wins	Error
The WMI request could not be completed and should be retried.\r\n	System	4203	WMI	Error
WINS could not accept on a socket.	System	4203	Wins	Error
The WMI data provider could not be located.\r\n	System	4204	WMI	Error
WINS could not read from the User Datagram Protocol (UDP) socket.	System	4204	Wins	Error
The WMI data provider references an instance set that has not been registered.\r\n	System	4205	WMI	Error
WINS could not read from NetBIOS over TCP/IP (NetBT).	System	4205	Wins	Error
The WMI data block or event notification has already been enabled.\r\n	System	4206	WMI	Error
WINS could not close a socket.	System	4206	Wins	Error
The WMI data block is no longer available.\r\n	System	4207	WMI	Error
***A Winsock Sendto message could not send all the bytes.\r\n	System	4207	Wins	Error
The WMI data service is not available.\r\n	System	4208	WMI	Error
WINS could not send a User Datagram Protocol (UDP) message to a WINS client.\r\n	System	4208	Wins	Error
The WMI data provider failed to carry out the request.\r\n	System	4209	WMI	Error
A Winsock Sendto message returned with an error.\r\n	System	4209	Wins	Error
The WMI MOF information is not valid.\r\n	System	4210	WMI	Error
***The Winsock receive function returned with an unexpected error.\r\n	System	4210	Wins	Error
The WMI registration information is not valid.\r\n	System	4211	WMI	Error
The WinSock send function returned with an unexpected error.\r\n	System	4211	Wins	Error
The WMI data block or event notification has already been disabled.\r\n	System	4212	WMI	Error
A message was received on an association. The association is in a bad state.\r\nThis indicates a bug in the WINS code. Restart WINS.\r\n	System	4212	Wins	Error
The WMI data item or data block is read only.\r\n	System	4213	WMI	Error
WINS could not allocate a responder association. Check to see if the system is low on resources.\r\n	System	4213	Wins	Error
The WMI data item or data block could not be changed.\r\n	System	4214	WMI	Error
***WINS could not allocate an initiator association. Check to see if the system is low on resources.\r\n	System	4214	Wins	Error
***WINS could not allocate an implicit dialogue. Check to see if the system is low on resources.\r\n	System	4215	Wins	Error
***WINS could not allocate an explicit dialogue. Check to see if the system is low on resources.	System	4216	Wins	Error
WINS could not look up the association block for a NetBIOS over TCP/IP (NetBT) \r\nassociation. Check to see if the message read is corrupted. WINS looks at \r\nbit 11-14 of the message to determine if the association is from another WINS or from an NetBT	System	4217	Wins	Error
WINS could not allocate a User Datagram Protocol (UDP) Buffer. Check to see if \r\nthe system is low on resources.\r\n	System	4218	Wins	Error
***WINS could not free a User Datagram Protocol (UDP) Buffer. Restart WINS.\r\n	System	4219	Wins	Error
***WINS could not create a communication subsystem thread. Check to see if the system is low on resources.\r\n	System	4220	Wins	Error
A WINS thread could not signal the main thread after closing its session.\r\nThis would be caused by the last thread in WINS closing the database.\r\n	System	4221	Wins	Error
A WINS thread could not signal a handle.\r\n	System	4222	Wins	Error
A WINS thread could not reset a handle.\r\n	System	4223	Wins	Error
WINS encountered a database error. This may or may not be a serious error.\r\nWINS will try to recover from it. You can check the database error events under\r\n'Application Log' category of the Event Viewer for the Exchange Component, \r\nESENT, source t	System	4224	Wins	Error
Initialization of TCP/UDP failed.\r\n	System	4225	Tcpip	Error
WINS could not update the record with the name, %1. Check the application log for the Exchange component, ESENT.\r\n	System	4225	Wins	Error
WINS could not update the Owner ID-to-Address mapping table in the database.\r\nThis means the in-memory table that maps to the database table has gotten \r\nout of sync with the database table.\r\n\r\nCheck the application log for the Exchange component,	System	4226	Wins	Error
The Push Thread was requested for a range of records but could not find any \r\nrecords in the range. Make sure that the replication time intervals are set \r\nproperly. If the tombstone interval and timeout intervals are not correct \r\n(that is, much le	System	4227	Wins	Error
The Timer thread could not be signaled. This indicates this computer is \r\nextremely overloaded or that the WINS application has failed. Check for low \r\nsystem resources. It may be necessary to restart WINS.\r\n	System	4228	Wins	Error
***The Timer could not signal the client thread.\r\n	System	4229	Wins	Error
***WINS could not get information about a key. Check to see if the permissions \r\non the key are set properly, system resources are low, or the registry is having a problem.\r\n	System	4230	Wins	Error
WINS could not get information about the Pull key. Check to see if the \r\npermissions on the key are set properly, system resources are low, or the \r\nregistry is having a problem.\r\n	System	4231	Wins	Error
WINS could not get information about the Push key. Check to see if the \r\npermissions on the key are set properly, system resources are low, or the \r\nregistry is having a problem.\r\n	System	4232	Wins	Error
WINS could not get information about the DATAFILES key. Check to see if the \r\npermissions on the key are set properly, system resources are low, or the \r\nregistry is having a problem.\r\n	System	4233	Wins	Error
WINS could not get information about the SPEC_GRP_MASKS key. Check to see if the \r\npermissions on the key are set properly, system resources are low, or the \r\nregistry is having a problem.\r\n	System	4234	Wins	Error
WINS could not open a Pull subkey. Check to see if the permissions on the key are set properly, system resources are low, or the registry is having a problem.\r\n	System	4235	Wins	Error
WINS could not open a Push subkey. Check to see if the permissions on the key \r\nare set properly, system resources are low, or the registry is having a problem.\r\n	System	4236	Wins	Error
WINS could not get the time interval from a Pull record.\r\n	System	4237	Wins	Error
***WINS could not get the time interval from a Push record.\r\n	System	4238	Wins	Error
WINS could not get the update count from a Push record. No default will be used. \r\n	System	4239	Wins	Error
WINS could not close an open key. Check to see if the permissions on the \r\nkey are set properly, system resources are low, or the registry is having a problem.\r\n	System	4240	Wins	Error
WINS Timer thread encountered an exception.\r\n	System	4241	Wins	Error
WINS Push thread encountered an exception. A recovery will be attempted.\r\n	System	4242	Wins	Error
WINS Pull thread encountered an error during the process of sending a push \r\nnotification to another WINS. The error code is given in the data section.\r\n	System	4243	Wins	Error
A WINS Remote Procedure Call (RPC) thread encountered an error.\r\n	System	4244	Wins	Error
The WINS TCP Listener thread encountered an error.\r\n	System	4245	Wins	Error
The WINS User Datagram Protocol (UDP) Listener thread encountered an error.\r\n	System	4246	Wins	Error
The WINS Scavenger thread encountered an error.\r\n	System	4247	Wins	Error
The WINS Challenger thread encountered an error.\r\n	System	4248	Wins	Error
A WINS worker thread encountered an error.\r\n	System	4249	Wins	Error
The WINS Scavenger thread could not scavenge a record. This record will \r\nbe ignored. The Scavenger will continue on to the next available record.\r\nCheck the application log for the Exchange component, ESENT.\r\n	System	4250	Wins	Error
The WINS Replication Pull Handler could not connect to a WINS server.\r\nAll retries failed. WINS will try again after a set number of replication \r\ntime intervals have elapsed.\r\n	System	4251	Wins	Error
WINS did not find any subkeys under the Pull key.	System	4252	Wins	Information
WINS did not find any subkeys under the Push key.	System	4253	Wins	Information
An error has prevented WINS from updating the WINS database. The database may be\r\ncorrupt.\r\n	System	4254	Wins	Error
***WINS has been asked to pull entries from itself. Check all the Pull subkeys of this WINS.\r\n	System	4255	Wins	Error
WINS was unable to propagate the push trigger.	System	4256	Wins	Error
WINS sent a name query or a name release with a certain transaction ID.\r\nIt received a response to the request that differed either in the name that it \r\ncontained or in the operation code. WINS has thrown the response away.\r\n	System	4257	Wins	Error
The WINS database is inconsistent. The number of owners found in the \r\nname-address mapping table are different from the number found in the \r\nowner-address mapping table.\r\n	System	4258	Wins	Error
The local WINS requested a remote WINS to update the version number of\r\na database record owned by the remote WINS. The remote WINS could not do the \r\nupdate and reported an error.\r\n	System	4259	Wins	Error
WINS received an error while registering replicas. It will not register any\r\nadditional replicas of this WINS at this time (the address is in the data section \r\n4th-8th byte). Check a previous log entry to determine the reason for this.\r\nIf you get	System	4260	Wins	Error
WINS received an error while trying to register a group's replica with name, %1.\r\nThe replica is owned by the WINS with the address given in the data section.\r\n	System	4261	Wins	Error
WINS received an error while trying to register the unique entry with the \r\nname, %1.\r\n	System	4262	Wins	Error
WINS received an error while trying to register the group entry with the \r\nname, %1.\r\n	System	4263	Wins	Error
WINS received an error while trying to update the version number of a record in\r\nthe WINS database.\r\n	System	4264	Wins	Error
Backlog of pending datagram sends reached. Please increase the value of Tcpip\\Parameters\\DGMaxSendFree in the registry.\r\n	System	4265	Tcpip	Warning
WINS received an error while trying to release a record in the WINS database.\r\n	System	4265	Wins	Error
The threading model of the component specified in the registry is inconsistent with the registration database. The faulty component is: %1%0\r\n	Application	4266	COM+	Error
WINS received an error while trying to query a record in the WINS database.\r\n	System	4267	Wins	Error
WINS received a replica whose state is incorrect. For example, the state may\r\nbe RELEASED or the replica might be an Internet group that does not have any\r\nmembers but the state is not TOMBSTONE.\r\n	System	4268	Wins	Error
The Scavenger thread was unable to change its priority level.\r\n	System	4269	Wins	Error
***A name release request was received for a record that didn't match the\r\nunique or group type indicated in the request. The request has been ignored.\r\n	System	4270	Wins	Error
A name release request was received for the record name, %2, that did not\r\nhave the same address as the requestor. The request has been ignored.\r\n	System	4271	Wins	Error
An error was encountered while trying send a push trigger notification to a\r\nremote WINS. The exception code is the second DWORD of the data section.\r\n	System	4272	Wins	Error
An error was encountered while trying to service a pull range request from a\r\nremote WINS. The exception code is the second DWORD of the data section.\r\n	System	4273	Wins	Error
WINS was either provided a bad command code or it became corrupt.\r\n	System	4274	Wins	Error
The static data file that is used to initialize the WINS database is too big.\r\n	System	4275	Wins	Error
An error was encountered during an operation on the static data file, %1.\r\n	System	4276	Wins	Error
The name of the file, after expansion, is bigger than WINS can handle. \r\nThe condensed string is, %1.\r\n	System	4277	Wins	Error
WINS could not do a static initialization.\r\n	System	4278	Wins	Error
An error occurred during the configuration or reconfiguration of WINS.\r\nIf this was encountered during boot time, WINS will come up with default\r\nparameters. You may want to research the cause of this initialization failure\r\nand then reboot WINS.\r\	System	4279	Wins	Error
An error occurred during the configuration or reconfiguration of WINS.\r\n	System	4280	Wins	Error
Unable to allocate required resources. Initialization failed.\r\n	System	4281	IPSEC	Error
A lock error has occurred. This could happen if the WINS is trying to send a\r\nresponse on a dialogue that is no longer ACTIVE. An implicit dialogue can\r\ncease to exist if the association it is mapped to terminates. In this case,\r\ngetting a lock erro	System	4281	Wins	Error
Unable to create device object %2. Initialization failed.\r\n	System	4282	IPSEC	Error
WINS could not import static mappings from the file, %1.\r\nVerify that the file exists and is readable.\r\n	System	4282	Wins	Error
Received %2 packet(s) with a bad Security Parameters Index from %3.\r\nThis could be a temporary glitch; if it persists please flush the Security Associations on this machine.\r\n	System	4283	IPSEC	Error
WINS encountered an error while processing a push trigger or update \r\nnotification. The error code is given in the data section. If it indicates a \r\ncommunication failure, check to see if the remote WINS that sent the trigger \r\nwent down. If the rem	System	4283	Wins	Error
Received %2 packet(s) in the clear from %3 which should have been secured.\r\nThis could be a temporary glitch; if it persists please flush the Security Associations on this machine.\r\n	System	4284	IPSEC	Error
WINS encountered an exception while processing a pull trigger.\r\n	System	4284	Wins	Error
Failed to authenticate the hash for %2 packet(s) received from %3.\r\nThis could be a temporary glitch; if it persists please flush the Security Associations on this machine.\r\n	System	4285	IPSEC	Error
WINS encountered an exception while retrieving data records.\r\n	System	4285	Wins	Error
Received %2 packet(s) from %3 with invalid packet syntax.\r\nThis could be a temporary glitch; if it persists please flush the Security Associations on this machine.\r\n	System	4286	IPSEC	Error
The WINS server cannot make or accept this connection since the connections \r\nlimit has been reached. This situation is temporary and should resolve by itself\r\nshortly.\r\n	System	4286	Wins	Error
Received %2 packet(s) from %3 with inproper protocol identifier.\r\nThis could be a temporary glitch; if it persists please flush the Security Associations on this machine.\r\n	System	4287	IPSEC	Error
The exception was encountered during the processing of a group member.\r\n	System	4287	Wins	Error
Received %2 packet(s) from %3 that failed the IPSec processing for an unknown reason.\r\nThis could be a temporary glitch; if it persists please flush the Security Associations on this machine.\r\n	System	4288	IPSEC	Error
The Scavenger thread encountered an error while cleaning up the owner-address\r\ntable. It will try again after the Verify interval has elapsed.\r\n	System	4288	Wins	Error
The IPSec driver failed the oakley negotiation with %2 since no filter\r\nexists to protect packets to that destination.\r\nPlease check the configuration on this machine to ensure at least one\r\nfilter matches the destination.\r\n	System	4289	IPSEC	Error
WINS is trying to update the version number of a database record that it\r\ndoes not own. This is a serious error if the WINS server is updating the\r\nrecord after a conflict. It is not a serious error if the WINS server is\r\nupdating the record as a re	System	4289	Wins	Error
The special group mask specified is not valid. It has either a non-hexadecimal \r\ncharacter or is less than 32 characters in length. A hexadecimal character is \r\nin the range 0-F (or 0-f).\r\n	System	4290	Wins	Error
WINS tried to get its addresses but failed. WINS will recover when the \r\nIP address comes back.\r\n	System	4291	Wins	Error
WINS did not get back any names from NetBIOS over TCP/IP (NetBT) when it did an \r\nadapter status.\r\n	System	4292	Wins	Error
WINS could not initialize properly with the security subsystem.\r\nAt initialization, WINS creates a security object and attaches an \r\nAccess Control List (ACL) to it. This security object is then used to \r\nauthenticate Remote Procedure Call (RPC) cal	System	4293	Wins	Error
The client application does not have the permissions required to execute the \r\nfunction.\r\n	System	4294	Wins	Error
When WINS replicated with its partners, one of the partners showed there was more data that actually existed. WINS adjusted its counter so that new registrations and updates are seen by its partners. This means that recovery did not work properly. You may	System	4295	Wins	Information
Too many concurrent static initializations are occurring. The number of such initializations currently active is given in the data section. This could be caused by reinitialization or imports from the WINS Manager tool. Try to initialize again.	System	4296	Wins	Error
WINS encountered a low memory condition. Check to see if the system is running \r\nout of virtual memory.\r\n	System	4297	Wins	Error
WINS found some database corruption. The record named, %1, is corrupt.\r\nIt could be that recovery from the last crash did not work properly. WINS will\r\ntry to recover. You may decide, however, to restore the WINS database from the \r\nbackup.\r\n	System	4298	Wins	Error
The following name, %1, is too long. It has been entered in the WINS database.\r\nIf you want the name to be over 15 characters, enclose it in quotes.\r\n	System	4299	Wins	Error
The driver could not be created.\r\n	System	4300	Nbt	Error
The media identifier does not represent a valid medium.\r\n	System	4300	NT Media Services (RSM)	Error
The record with the name, %1, has bad address. It has not been entered in the \r\nWINS database.\r\n	System	4300	Wins	Error
Unable to open the Registry Parameters to read configuration information.\r\n	System	4301	Nbt	Error
The library identifier does not represent a valid library.\r\n	System	4301	NT Media Services (RSM)	Error
Current Status of the Process Heap. Data is: Allocated Entries, Allocated Bytes, Free Entries, Free Bytes, Module Line Number.\r\n	Application	4301	Perfctrs	Information
The computer running the WINS server does not have a valid address.\r\nWhen WINS requested an address, it received 0.0.0.0 as the address.\r\n\r\nNOTE: WINS binds to the first adapter in a machine with more than one adapter\r\nbound to TCP/IP. Check the b	System	4301	Wins	Error
The media pool identifier does not represent a valid media pool.\r\n	System	4302	NT Media Services (RSM)	Error
Error returned by Heap Status routine. Data is returned status value.\r\n	Application	4302	Perfctrs	Error
The backup WINS server address is not configured in the registry.\r\n	System	4302	Nbt	Warning
WINS encountered an error doing a database backup to directory %1.\r\n	System	4302	Wins	Error
The drive and medium are not compatible or exist in different libraries.\r\n	System	4303	NT Media Services (RSM)	Error
The primary WINS server address is not configured in the registry.\r\n	System	4303	Nbt	Warning
WINS encountered an error while deleting the file, %1.	System	4303	Wins	Error
The medium currently exists in an offline library and must be online to perform this operation.\r\n	System	4304	NT Media Services (RSM)	Error
Always%0\r\n	System	4304	System	Information
The backup WINS server address is not formated correctly in the registry.\r\n	System	4304	Nbt	Warning
WINS encountered an error while deleting one or more records of a WINS.\r\nThe WINS address is in the second DWORD in data section. Check a previous log\r\nentry to determine what went wrong.	System	4304	Wins	Error
The operation cannot be performed on an offline library.\r\n	System	4305	NT Media Services (RSM)	Error
The primary WINS server address is not formated correctly in the registry.\r\n	System	4305	Nbt	Warning
WINS encountered an error while getting the browser names for a client.	System	4305	Wins	Error
Unable to configure the addresses of the WINS servers.\r\n	System	4306	Nbt	Error
The library, drive, or media pool is empty.\r\n	System	4306	NT Media Services (RSM)	Error
Unlimited%0\r\n	System	4306	System	Information
The length of the message sent by another WINS indicates a very big message.\r\nThere may have been corruption of the data. WINS will ignore this message,\r\nterminate the connection with the remote WINS, and continue.\r\n	System	4306	Wins	Error
Initialization failed because the transport refused to open initial Addresses.\r\n	System	4307	Nbt	Error
Sunday%0\r\n	System	4307	System	Information
The library, drive, or media pool must be empty to perform this operation.\r\n	System	4307	NT Media Services (RSM)	Error
The WINS replicator Pull thread encountered an error while processing a request.\r\nCheck other log entries to determine what went wrong.\r\n	System	4307	Wins	Error
Monday%0\r\n	System	4308	System	Information
No media is currently available in this media pool or library.\r\n	System	4308	NT Media Services (RSM)	Error
Initialization failed because the transport refused to open initial Connections.\r\n	System	4308	Nbt	Error
***WINS does not support this functionality.\r\n	System	4308	Wins	Error
Tuesday%0\r\n	System	4309	System	Information
A resource required for this operation is disabled.\r\n	System	4309	NT Media Services (RSM)	Error
Data structure initialization failed.\r\n	System	4309	Nbt	Error
This WINS computer has %1 processors. It has %2 bytes of physical memory and \r\n%3 bytes of memory available for allocation.\r\n	System	4309	Wins	Error
Wednesday%0\r\n	System	4310	System	Information
The media identifier does not represent a valid cleaner.\r\n	System	4310	NT Media Services (RSM)	Error
Initialization failed because the timers could not be started.\r\n	System	4310	Nbt	Error
The record named, %1, could not replace another record in the WINS database.\r\nThe record's version number is %2. The version number of record in the database is %3.\r\n	System	4310	Wins	Error
Thursday%0\r\n	System	4311	System	Information
The drive cannot be cleaned or does not support cleaning.\r\n	System	4311	NT Media Services (RSM)	Error
Initialization failed because the driver device could not be created.\r\n	System	4311	Nbt	Error
WINS has found some database corruption. It will try to recover.\r\nThis recovery process can take a long time. Do not kill WINS in the middle of \r\nthe recovery. If you do, you will have to restart WINS with a clean database.\r\n	System	4311	Wins	Error
Friday%0\r\n	System	4312	System	Information
The object identifier does not represent a valid object.\r\n	System	4312	NT Media Services (RSM)	Error
There are no adapters configured for this protocol stack.\r\n	System	4312	Nbt	Warning
WINS has exceeded the wait time for all threads to terminate. The number of\r\nthreads still active is given in the second DWORD of the data section.\r\nThe thread that could be stuck is the replicator thread. It could be because \r\nof the other WINS bei	System	4312	Wins	Error
Saturday%0\r\n	System	4313	System	Information
Unable to read from or write to the database.\r\n	System	4313	NT Media Services (RSM)	Error
Unable to open the Registry Linkage to read configuration information.\r\n	System	4313	Nbt	Error
The name, %1, is in the wrong format. It has not been put in the\r\nWINS database. Check to see if you have a space before the name. If you want \r\nthis space in the name, enclose the name within quotes.\r\n	System	4313	Wins	Error
The database is full.\r\n	System	4314	NT Media Services (RSM)	Error
Unable to read the driver's bindings to the transport from the registry.\r\n	System	4314	Nbt	Error
WINS Performance Monitor Counters could not get the WINS statistics.\r\n	System	4314	Wins	Error
The medium is not compatible with the device or media pool.\r\n	System	4315	NT Media Services (RSM)	Error
Unable to read the driver's exported linkage configuration information.\r\n	System	4315	Nbt	Error
WINS Performance Monitor Counters could not open the event log.\r\n	System	4315	Wins	Error
The resource required for this operation does not exist.\r\n	System	4316	NT Media Services (RSM)	Error
Unable to open the Registry to read the WINS server addresses.\r\n	System	4316	Nbt	Warning
***WINS could not open the log file. Check the log path specified in the registry\r\nunder WINS\\Parameters\\LogFilePath and restart WINS, if necessary. WINS is going \r\nto use the default log file path of %%SystemRoot%%\\system32\\WINS.\r\n	System	4316	Wins	Error
The operation identifier is not valid.\r\n	System	4317	NT Media Services (RSM)	Error
The Netbios Name Scope has a component longer than 63 characters. Each label\r\nin the Scope cannot be longer than 63 bytes.  Use the Control Panel, Network\r\napplet to change the scope.\r\n	System	4317	Nbt	Warning
WINS found a name in the WINS database with a length of more than 255 \r\ncharacters. The name was truncated to 17 characters.\r\n	System	4317	Wins	Error
The media is not mounted or ready for use.\r\n	System	4318	NT Media Services (RSM)	Error
The Netbios Name Scope is too long. The scope cannot be longer than\r\n255 bytes. Use the Control Panel, Network applet to change the scope.\r\n	System	4318	Nbt	Error
WINS could not start due to a missing or corrupt database.\r\nRestore the database using WINS Manager (or winscl.exe found in the Windows 2000 Resource Kit) and restart WINS. If WINS still does not start, begin with a fresh \r\ncopy of the database.\r\n\r	System	4318	Wins	Error
The device is not ready for use.\r\n	System	4319	NT Media Services (RSM)	Error
A duplicate name has been detected on the TCP network.  The IP address of\r\nthe machine that sent the message is in the data. Use nbtstat -n in a\r\ncommand window to see which name is in the Conflict state.\r\n	System	4319	Nbt	Error
WINS could not start because the existent database must be converted to the\r\nWindows 2000 format. If this is the first invocation of WINS after an upgrade \r\nFrom NT 3.51, you need to run the convert utility (upg351db.exe in the\r\n%%SystemRoot%%\\syst	System	4319	Wins	Error
The operator or administrator has refused the request.\r\n	System	4320	NT Media Services (RSM)	Error
Another machine has sent a name release message to this machine probably\r\nbecause a duplicate name has been detected on the TCP network.  The IP address\r\nof the node that sent the message is in the data. Use nbtstat -n in a\r\ncommand window to see wh	System	4320	Nbt	Error
WINS will not start because the existing WINS database needs to be converted \r\nto the Windows 2000 format. WINS has initiated this conversion using a \r\nprocess called JETCONV. Once the conversion is successfully completed, WINS \r\nwill be restarted.	System	4320	Wins	Error
Unknown%0\r\n	System	4321	System	Information
The drive identifier does not represent a valid drive.\r\n	System	4321	NT Media Services (RSM)	Error
The NoOfWrkThds parameter's value is too large and cannot be supported.	System	4321	Wins	Error
Library is full.  No slot is available for use.\r\n	System	4322	NT Media Services (RSM)	Error
WINS could not come up because the existing WINS database needs conversion to \r\nthe Windows 2000 format.\r\n\r\nIf this is the first invocation of WINS after an upgrade from NT3.51, first,\r\nyou need to run the convert utility (upg351db.exe in the %%Sy	System	4322	Wins	Error
The transport cannot access the medium.\r\n	System	4323	NT Media Services (RSM)	Error
WINS could not start because the existing database needs to be converted to \r\nthe Windows 2000 format.\r\n\r\nIf this is the first invocation of WINS after an upgrade from NT 4.0, you need \r\nTo run the convert utility (edbutil.exe in the %%SystemRoot%	System	4323	Wins	Error
Unable to load the medium into the drive.\r\n	System	4324	NT Media Services (RSM)	Error
WINS cannot start because the existing WINS database needs conversion to the\r\nWindows 2000 format. WINS has initiated the conversion using the JETCONV \r\nprocess. Once the conversion is complete, WINS will start automatically. Do not\r\nreboot or kill	System	4324	Wins	Error
Unable to retrieve the drive status.\r\n	System	4325	NT Media Services (RSM)	Error
***WINS could not read the Initial Challenge Retry Interval from the registry.	System	4325	Wins	Information
Unable to retrieve the slot status.\r\n	System	4326	NT Media Services (RSM)	Error
WINS could not read the Challenge Maximum Number of Retries from the registry.	System	4326	Wins	Information
Server%0\r\n	System	4326	System	Information
Unable to retrieve status about the transport.\r\n	System	4327	NT Media Services (RSM)	Error
Adminstrator '%1' initiated a backup of the WINS database.	System	4327	Wins	Information
Redirector%0\r\n	System	4327	System	Information
Cannot use the transport because it is already in use.\r\n	System	4328	NT Media Services (RSM)	Error
Adminstrator '%1' has initiated a scavenging operation.\r\n	System	4328	Wins	Information
Application%0\r\n	System	4328	System	Information
Unable to open or close the inject/eject port.\r\n	System	4329	NT Media Services (RSM)	Error
The WINS server has started a scavenging operation.	System	4329	Wins	Information
Unable to eject the medium because it is in a drive.\r\n	System	4330	NT Media Services (RSM)	Error
The WINS server has completed the scavenging operation.	System	4330	Wins	Information
A cleaner slot is already reserved.\r\n	System	4331	NT Media Services (RSM)	Error
Adminstrator '%1' has initiated a consistency check operation.\r\n	System	4331	Wins	Information
A cleaner slot is not reserved.\r\n	System	4332	NT Media Services (RSM)	Error
The WINS server has started a consistency check operation.\r\n	System	4332	Wins	Information
(none)%0\r\n	System	4332	System	Information
The cleaner cartridge has performed the maximum number of drive cleanings.\r\n	System	4333	NT Media Services (RSM)	Error
The WINS server has completed the consistency check operation.\r\n	System	4333	Wins	Information
Device%0\r\n	System	4333	System	Information
Unexpected on-medium identifier.\r\n	System	4334	NT Media Services (RSM)	Error
Adminstrator '%1' has initiated the delete owner function of the WINS \r\npartner, %2.\r\n	System	4334	Wins	Information
Remark%0\r\n	System	4334	System	Information
The last remaining item in this group or resource cannot be deleted.\r\n	System	4335	NT Media Services (RSM)	Error
The WINS server has initiated the delete owner function of the WINS partner, %2.\r\n	System	4335	Wins	Information
The message provided exceeds the maximum size allowed for this parameter.\r\n	System	4336	NT Media Services (RSM)	Error
The WINS server has completed the delete owner function of the WINS partner, %2.	System	4336	Wins	Information
Queues%0\r\n	System	4336	System	Information
The volume contains system or paging files.\r\n	System	4337	NT Media Services (RSM)	Error
The WINS Server could not initialize security to allow the read-only operations.	System	4337	Wins	Error
The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.\r\n	System	4338	NT Media Services (RSM)	Error
User name%0\r\n	System	4338	System	Information
The WINS server started the burst handling of incoming requests. WINS does this to handle a sudden increase of incoming requests. WINS will also log an event indicating when the burst handling stops. If you see this event frequently, you may want to upgra	System	4338	Wins	Information
This offline media cannot be mounted on this system since no enabled drives are present which can be used.\r\n	System	4339	NT Media Services (RSM)	Error
The WINS server completed the burst handling of incoming requests because the queue length became a quarter of what it was when burst handling began.	System	4339	Wins	Information
(Y/N) [Y]%0\r\n	System	4340	System	Information
WINS Users%0	System	4340	Wins	Information
(Y/N) [N]%0\r\n	System	4341	System	Information
Members who have view-only access to the WINS Server%0	System	4341	Wins	Information
(not found)%0\r\n	System	4349	System	Information
The remote storage service was not able to recall the file.\r\n	System	4350	NT Remote Storage	Error
(unknown)%0\r\n	System	4350	System	Information
The remote storage service is not operational at this time.\r\n	System	4351	NT Remote Storage	Error
For help on %1 type NET HELP %1\r\n	System	4351	System	Information
The remote storage service encountered a media error.\r\n	System	4352	NT Remote Storage	Error
Please type the password: %0\r\n	System	4354	System	Information
Type the password for %1: %0\r\n	System	4357	System	Information
Type a password for the user: %0\r\n	System	4358	System	Information
Type the password for the shared resource: %0\r\n	System	4359	System	Information
Type your password: %0\r\n	System	4360	System	Information
Retype the password to confirm: %0\r\n	System	4361	System	Information
Type the user's old password: %0\r\n	System	4362	System	Information
Type the user's new password: %0\r\n	System	4363	System	Information
Type your new password: %0\r\n	System	4364	System	Information
Type the Replicator service password: %0\r\n	System	4365	System	Information
Type your user name, or press ENTER if it is %1: %0\r\n	System	4366	System	Information
Type the domain or server where you want to change a password, or\r\npress ENTER if it is for domain %1: %0.\r\n	System	4367	System	Information
Type your user name: %0\r\n	System	4368	System	Information
Network statistics for \\%1\r\n	System	4369	System	Information
Printing options for %1\r\n	System	4370	System	Information
Communication-device queues accessing %1\r\n	System	4371	System	Information
Print job detail\r\n	System	4372	System	Information
Communication-device queues at \\\\%1\r\n	System	4373	System	Information
Printers at %1\r\n	System	4374	System	Information
Printers accessing %1\r\n	System	4375	System	Information
Print jobs at %1:\r\n	System	4376	System	Information
Shared resources at %1\r\n	System	4377	System	Information
The following running services can be controlled:\r\n	System	4378	System	Information
Statistics are available for the following running services:\r\n	System	4379	System	Information
User accounts for \\\\%1\r\n	System	4380	System	Information
The syntax of this command is:\r\n	System	4381	System	Information
The options of this command are:\r\n	System	4382	System	Information
Please enter the name of the Primary Domain Controller: %0\r\n	System	4383	System	Information
The string you have entered is too long. The maximum\r\nis %1, please reenter. %0\r\n	System	4384	System	Information
Sunday%0\r\n	System	4385	System	Information
Monday%0\r\n	System	4386	System	Information
Tuesday%0\r\n	System	4387	System	Information
Wednesday%0\r\n	System	4388	System	Information
Thursday%0\r\n	System	4389	System	Information
The file or directory is not a reparse point.\r\n	System	4390	NT Reparse Points	Error
Friday%0\r\n	System	4390	System	Information
The reparse point attribute cannot be set because it conflicts with an existing attribute.\r\n	System	4391	NT Reparse Points	Error
Saturday%0\r\n	System	4391	System	Information
The data present in the reparse point buffer is invalid.\r\n	System	4392	NT Reparse Points	Error
The tag present in the reparse point buffer is invalid.\r\n	System	4393	NT Reparse Points	Error
There is a mismatch between the tag specified in the request and the tag present in the reparse point.\r\n\r\n	System	4394	NT Reparse Points	Error
Group Accounts for \\\\%1\r\n	System	4400	System	Information
Group name%0\r\n	System	4401	System	Information
Comment%0\r\n	System	4402	System	Information
Aliases for \\\\%1\r\n	System	4405	System	Information
Alias name%0\r\n	System	4406	System	Information
Comment%0\r\n	System	4407	System	Information
User Accounts for \\\\%1\r\n	System	4410	System	Information
User name%0\r\n	System	4411	System	Information
Full Name%0\r\n	System	4412	System	Information
Comment%0\r\n	System	4413	System	Information
User's comment%0\r\n	System	4414	System	Information
Parameters%0\r\n	System	4415	System	Information
Country code%0\r\n	System	4416	System	Information
Privilege level%0\r\n	System	4417	System	Information
Operator privileges%0\r\n	System	4418	System	Information
Account active%0\r\n	System	4419	System	Information
Account expires%0\r\n	System	4420	System	Information
Password last set%0\r\n	System	4421	System	Information
Password expires%0\r\n	System	4422	System	Information
Password changeable%0\r\n	System	4423	System	Information
Workstations allowed%0\r\n	System	4424	System	Information
Maximum disk space%0\r\n	System	4425	System	Information
Unlimited%0\r\n	System	4426	System	Information
Local Group Memberships%0\r\n	System	4427	System	Information
Domain controller%0\r\n	System	4428	System	Information
Logon script%0\r\n	System	4429	System	Information
Last logon%0\r\n	System	4430	System	Information
Global Group memberships%0\r\n	System	4431	System	Information
Logon hours allowed%0\r\n	System	4432	System	Information
Daily %1 - %2%0\r\n	System	4435	System	Information
Home directory%0\r\n	System	4436	System	Information
Password required%0\r\n	System	4437	System	Information
User may change password%0\r\n	System	4438	System	Information
User profile%0\r\n	System	4439	System	Information
Locked%0\r\n	System	4440	System	Information
Computer name%0\r\n	System	4450	System	Information
User name%0\r\n	System	4451	System	Information
Software version%0\r\n	System	4452	System	Information
Workstation active on%0\r\n	System	4453	System	Information
Windows NT root directory%0\r\n	System	4454	System	Information
Workstation domain%0\r\n	System	4455	System	Information
Logon domain%0\r\n	System	4456	System	Information
Other domain(s)%0\r\n	System	4457	System	Information
COM Open Timeout (sec)%0\r\n	System	4458	System	Information
COM Send Count (byte)%0\r\n	System	4459	System	Information
COM Send Timeout (msec)%0\r\n	System	4460	System	Information
DOS session print time-out (sec)%0\r\n	System	4461	System	Information
Maximum error log size (K)%0\r\n	System	4462	System	Information
Maximum cache memory (K)%0\r\n	System	4463	System	Information
Number of network buffers%0\r\n	System	4464	System	Information
Number of character buffers%0\r\n	System	4465	System	Information
Size of network buffers%0\r\n	System	4466	System	Information
Size of character buffers%0\r\n	System	4467	System	Information
Full Computer name%0\r\n	System	4468	System	Information
Workstation Domain DNS Name%0\r\n	System	4469	System	Information
Windows 2000%0\r\n	System	4470	System	Information
Server Name%0\r\n	System	4481	System	Information
Server Comment%0\r\n	System	4482	System	Information
Send administrative alerts to%0\r\n	System	4483	System	Information
Software version%0\r\n	System	4484	System	Information
Peer Server%0\r\n	System	4485	System	Information
Windows NT%0\r\n	System	4486	System	Information
Server Level%0\r\n	System	4487	System	Information
Windows NT Server%0\r\n	System	4488	System	Information
Server is active on%0\r\n	System	4489	System	Information
Server hidden%0\r\n	System	4492	System	Information
Single Instance Storage is not available on this volume.\r\n	System	4500	NT Single Instance Store	Error
Maximum Logged On Users%0\r\n	System	4506	System	Information
Maximum concurrent administrators%0\r\n	System	4507	System	Information
Maximum resources shared%0\r\n	System	4508	System	Information
Maximum connections to resources%0\r\n	System	4509	System	Information
Maximum open files on server%0\r\n	System	4510	System	Information
Maximum open files per session%0\r\n	System	4511	System	Information
Maximum file locks%0\r\n	System	4512	System	Information
Idle session time (min)%0\r\n	System	4520	System	Information
Share-level%0\r\n	System	4526	System	Information
User-level%0\r\n	System	4527	System	Information
Unlimited Server%0\r\n	System	4530	System	Information
Force user logoff how long after time expires?:%0\r\n\r\n	System	4570	System	Error
Lock out account after how many bad passwords?:%0\r\n\r\n	System	4571	System	Information
Minimum password age (days):%0\r\n	System	4572	System	Information
Maximum password age (days):%0\r\n	System	4573	System	Information
Minimum password length:%0\r\n	System	4574	System	Information
Length of password history maintained:%0\r\n	System	4575	System	Information
Computer role:%0\r\n	System	4576	System	Information
Primary Domain controller for workstation domain:%0.\r\n	System	4577	System	Information
Lockout threshold:%0\r\n	System	4578	System	Information
Lockout duration (minutes):%0\r\n	System	4579	System	Information
Lockout observation window (minutes):%0\r\n	System	4580	System	Information
Statistics since%0\r\n	System	4600	System	Information
Sessions accepted%0\r\n	System	4601	System	Information
Sessions timed-out%0\r\n	System	4602	System	Information
Sessions errored-out%0\r\n	System	4603	System	Information
Kilobytes sent%0\r\n	System	4604	System	Information
Kilobytes received%0\r\n	System	4605	System	Information
Mean response time (msec)%0\r\n	System	4606	System	Information
Network errors%0\r\n	System	4607	System	Information
Files accessed%0\r\n	System	4608	System	Information
Print jobs spooled%0\r\n	System	4609	System	Information
System errors%0\r\n	System	4610	System	Information
Password violations%0\r\n	System	4611	System	Information
Permission violations%0\r\n	System	4612	System	Information
Communication devices accessed%0\r\n	System	4613	System	Information
Sessions started%0\r\n	System	4614	System	Information
Sessions reconnected%0\r\n	System	4615	System	Information
Sessions starts failed%0\r\n	System	4616	System	Information
Sessions disconnected%0\r\n	System	4617	System	Information
Network I/O's performed%0\r\n	System	4618	System	Information
Files and pipes accessed%0\r\n	System	4619	System	Information
Times buffers exhausted\r\n	System	4620	System	Information
Big buffers%0\r\n	System	4621	System	Information
Request buffers%0\r\n	System	4622	System	Information
Workstation Statistics for \\\\%1\r\n	System	4623	System	Information
Server Statistics for \\\\%1\r\n	System	4624	System	Information
Statistics since %1\r\n	System	4625	System	Information
Connections made%0\r\n	System	4626	System	Information
Connections failed%0\r\n	System	4627	System	Information
Bytes received%0\r\n	System	4630	System	Information
Server Message Blocks (SMBs) received%0\r\n	System	4631	System	Information
Bytes transmitted%0\r\n	System	4632	System	Information
Server Message Blocks (SMBs) transmitted%0\r\n	System	4633	System	Information
Read operations%0\r\n	System	4634	System	Information
Write operations%0\r\n	System	4635	System	Information
Raw reads denied%0\r\n	System	4636	System	Information
Raw writes denied%0\r\n	System	4637	System	Information
Network errors%0\r\n	System	4638	System	Information
Connections made%0\r\n	System	4639	System	Information
Reconnections made%0\r\n	System	4640	System	Information
Server disconnects%0\r\n	System	4641	System	Information
Sessions started%0\r\n	System	4642	System	Information
Hung sessions%0\r\n	System	4643	System	Information
Failed sessions%0\r\n	System	4644	System	Information
Failed operations%0\r\n	System	4645	System	Information
Use count%0\r\n	System	4646	System	Information
Failed use count%0\r\n	System	4647	System	Information
%1 was deleted successfully.\r\n	System	4650	System	Information
%1 was used successfully.\r\n	System	4651	System	Information
The message was successfully sent to %1.\r\n	System	4652	System	Information
The message name %1 was forwarded successfully.\r\n	System	4653	System	Information
The message name %1 was added successfully.\r\n	System	4654	System	Information
The message name forwarding was successfully canceled.\r\n	System	4655	System	Information
%1 was shared successfully.\r\n	System	4656	System	Information
The server %1 successfully logged you on as %2.\r\n	System	4657	System	Information
%1 was logged off successfully.\r\n	System	4658	System	Information
%1 was successfully removed from the list of shares the Server creates\r\non startup.\r\n	System	4659	System	Information
The password was changed successfully.\r\n	System	4661	System	Information
%1 file(s) copied.\r\n	System	4662	System	Information
%1 file(s) moved.\r\n	System	4663	System	Information
The message was successfully sent to all users of the network.\r\n	System	4664	System	Information
The message was successfully sent to domain %1.\r\n	System	4665	System	Information
The message was successfully sent to all users of this server.\r\n	System	4666	System	Information
The message was successfully sent to group *%1.\r\n	System	4667	System	Information
Microsoft LAN Manager Version %1\r\n	System	4695	System	Information
Windows NT Server\r\n	System	4696	System	Information
Windows NT Workstation\r\n	System	4697	System	Information
<NOBR>MS-DOS</NOBR> Enhanced Workstation\r\n	System	4698	System	Information
Created at %1\r\n	System	4699	System	Information
Server Name            Remark\r\n	System	4700	System	Information
Share name   Type         Used as  Comment\r\n	System	4701	System	Information
Resources on %1\r\n	System	4705	System	Information
Other available networks are:\r\n	System	4706	System	Information
Status       Local     Remote                    Network\r\n	System	4714	System	Information
Dormant%0\r\n	System	4716	System	Information
Paused%0\r\n	System	4717	System	Information
Disconnected%0\r\n	System	4718	System	Information
Connecting%0\r\n	System	4720	System	Information
Reconnecting%0\r\n	System	4721	System	Information
Status%0\r\n	System	4722	System	Information
Local name%0\r\n	System	4723	System	Information
Remote name%0\r\n	System	4724	System	Information
Resource type%0\r\n	System	4725	System	Information
# Opens%0\r\n	System	4726	System	Information
Unavailable%0\r\n	System	4728	System	Error
Share name   Resource                        Remark\r\n	System	4730	System	Information
Share name%0\r\n	System	4731	System	Information
Resource%0\r\n	System	4732	System	Information
Spooled%0\r\n	System	4733	System	Information
Permission%0\r\n	System	4734	System	Information
Maximum users%0\r\n	System	4735	System	Information
No limit%0\r\n	System	4736	System	Information
The share name entered may not be accessible from some <NOBR>MS-DOS</NOBR> workstations.\r\nAre you sure you want to use this share name? %1: %0\r\n	System	4738	System	Error
ID         Path                                    User name            # Locks\r\n	System	4740	System	Information
File ID%0\r\n	System	4741	System	Information
Permissions%0\r\n	System	4743	System	Information
Computer               User name            Client Type       Opens Idle time\r\n	System	4750	System	Information
Computer%0\r\n	System	4751	System	Information
Sess time%0\r\n	System	4752	System	Information
Idle time%0\r\n	System	4753	System	Information
Share name     Type     # Opens\r\n	System	4754	System	Information
Client type%0\r\n	System	4755	System	Information
Guest logon%0\r\n	System	4756	System	Information
Offline cache enabled: manual restore%0\r\n	System	4770	System	Information
Offline cache enabled: automatic restore%0\r\n	System	4771	System	Information
Offline cache enabled: no sharing among users%0\r\n	System	4772	System	Information
Offline cache disabled%0\r\n	System	4773	System	Information
Automatic%0\r\n	System	4774	System	Information
Manual%0\r\n	System	4775	System	Information
Forwarded to%0\r\n	System	4801	System	Information
Forwarded to you from%0\r\n	System	4802	System	Information
Users of this server%0\r\n	System	4803	System	Information
Net Send has been interrupted by a Ctrl+Break from the user.\r\n	System	4804	System	Information
Name                         Job #      Size            Status\r\n	System	4810	System	Information
Status%0\r\n	System	4816	System	Information
Separator file%0\r\n	System	4817	System	Information
Comment%0\r\n	System	4818	System	Information
Priority%0\r\n	System	4819	System	Information
Print after%0\r\n	System	4820	System	Information
Print until%0\r\n	System	4821	System	Information
Print processor%0\r\n	System	4822	System	Information
Additional info%0\r\n	System	4823	System	Information
Parameters%0\r\n	System	4824	System	Information
Print Devices%0\r\n	System	4825	System	Information
Printer Active%0\r\n	System	4826	System	Information
Printer held%0\r\n	System	4827	System	Information
Printer error%0\r\n	System	4828	System	Information
Printer being deleted%0\r\n	System	4829	System	Information
Printer status unknown%0\r\n	System	4830	System	Information
Held until %1%0\r\n	System	4840	System	Information
Submitting user%0\r\n	System	4842	System	Information
Notify%0\r\n	System	4843	System	Information
Job data type%0\r\n	System	4844	System	Information
Job parameters%0\r\n	System	4845	System	Information
Waiting%0\r\n	System	4846	System	Information
Held in queue%0\r\n	System	4847	System	Information
Spooling%0\r\n	System	4848	System	Information
Paused%0\r\n	System	4849	System	Information
Offline%0\r\n	System	4850	System	Information
Out of paper%0\r\n	System	4852	System	Error
Intervention required%0\r\n	System	4853	System	Error
Printing%0\r\n	System	4854	System	Information
Paused on %1%0\r\n	System	4856	System	Information
Offline on %1%0\r\n	System	4857	System	Information
Error on%1%0\r\n	System	4858	System	Information
Out of Paper on %1%0\r\n	System	4859	System	Error
Check printer on %1%0\r\n	System	4860	System	Error
Printing on %1%0\r\n	System	4861	System	Information
Driver%0\r\n	System	4862	System	Information
User name              Type                 Date%0\r\n	System	4930	System	Information
Lockout%0\r\n	System	4931	System	Information
Service%0\r\n	System	4932	System	Information
Server%0\r\n	System	4933	System	Information
Server started%0\r\n	System	4934	System	Information
Server paused%0\r\n	System	4935	System	Information
Server continued%0\r\n	System	4936	System	Information
Server stopped%0\r\n	System	4937	System	Information
Session%0\r\n	System	4938	System	Information
Logon Guest%0\r\n	System	4939	System	Information
Logon User%0\r\n	System	4940	System	Information
Logon Administrator%0\r\n	System	4941	System	Information
Logoff normal%0\r\n	System	4942	System	Information
Logoff error%0\r\n	System	4944	System	Information
Logoff auto-disconnect%0\r\n	System	4945	System	Information
Logoff administrator-disconnect%0\r\n	System	4946	System	Information
Logoff forced by logon restrictions%0\r\n	System	4947	System	Information
Service%0\r\n	System	4948	System	Information
%1 Installed%0\r\n	System	4949	System	Information
%1 Install Pending%0\r\n	System	4950	System	Information
%1 Paused%0\r\n	System	4951	System	Information
%1 Pause Pending%0\r\n	System	4952	System	Information
%1 Continued%0\r\n	System	4953	System	Information
%1 Continue Pending%0\r\n	System	4954	System	Information
%1 Stopped%0\r\n	System	4955	System	Information
%1 Stop Pending%0\r\n	System	4956	System	Information
Account%0\r\n	System	4957	System	Information
User account %1 was modified.%0\r\n	System	4958	System	Information
Group account %1 was modified.%0\r\n	System	4959	System	Information
User account %1 was deleted%0\r\n	System	4960	System	Information
Group account %1 was deleted%0\r\n	System	4961	System	Information
User account %1 was added%0\r\n	System	4962	System	Information
Group account %1 was added%0\r\n	System	4963	System	Information
Account system settings were modified%0\r\n	System	4964	System	Information
Logon restriction%0\r\n	System	4965	System	Information
Limit exceeded:  UNKNOWN%0\r\n	System	4966	System	Information
Limit exceeded:  Logon hours%0\r\n	System	4967	System	Information
Limit exceeded:  Account expired%0\r\n	System	4968	System	Information
Limit exceeded:  Workstation ID invalid%0\r\n	System	4969	System	Information
Limit exceeded:  Account disabled%0\r\n	System	4970	System	Information
Limit exceeded:  Account deleted%0\r\n	System	4971	System	Information
Use %1%0\r\n	System	4973	System	Information
Unuse %1%0\r\n	System	4974	System	Information
User's session disconnected %1%0\r\n	System	4975	System	Information
Administrator stopped sharing resource %1%0\r\n	System	4976	System	Information
User reached limit for %1%0\r\n	System	4977	System	Information
Bad password%0\r\n	System	4978	System	Information
Administrator privilege required%0\r\n	System	4979	System	Error
Access%0\r\n	System	4980	System	Information
%1 permissions added%0\r\n	System	4981	System	Information
%1 permissions modified%0\r\n	System	4982	System	Information
%1 permissions deleted%0\r\n	System	4983	System	Information
Access denied%0\r\n	System	4984	System	Error
Unknown%0\r\n	System	4985	System	Information
Duration:%0\r\n	System	4987	System	Information
Duration: Not available%0\r\n	System	4988	System	Information
Duration: Less than one second%0\r\n	System	4989	System	Information
(none)%0\r\n	System	4990	System	Information
Closed %1%0\r\n	System	4991	System	Error
Closed %1 (disconnected)%0\r\n	System	4992	System	Information
Administrator closed %1%0\r\n	System	4993	System	Information
Access ended%0\r\n	System	4994	System	Information
Log on to network%0\r\n	System	4995	System	Information
Logon denied%0\r\n	System	4996	System	Error
Program             Message             Time%0\r\n	System	4997	System	Information
Account locked due to %1 bad passwords%0\r\n	System	4998	System	Information
Account unlocked by administrator%0\r\n	System	4999	System	Information
OpenDsisPerformanceData routine entered.\r\n	Application	5000	Perfctrs	Information
%2 : Has encountered a conflict in resources and could not load.\r\n	System	5000	ndis	Error
Log off network%0\r\n	System	5000	System	Information
No memory was available to allocate the buffer for the trap to be processed.\r\nTrap will not be sent.\r\n	Application	5000	EvntAgnt	Warning
The cluster resource cannot be moved to another group because other resources are dependent on it.\r\n	Application	5001	Cluster	Error
Error converting a DSIS MIB string to it's corresponding ObjectId. This error is usually caused by the system's MIB not supporting the DSIS MIB inforamation.\r\n	Application	5001	Perfctrs	Error
%2 : Could not allocate the resources necessary for operation.\r\n	System	5001	ndis	Error
No memory was available to allocate the storage for the event type string.\r\nTrap will not be sent.\r\n	Application	5001	EvntAgnt	Warning
The cluster resource dependency cannot be found.\r\n	Application	5002	Cluster	Error
%2 : Has determined that the adapter is not functioning properly.\r\n	System	5002	ndis	Error
No memory was available to allocate the storage for the event category string.\r\nTrap will not be sent.\r\n	Application	5002	EvntAgnt	Warning
The cluster resource cannot be made dependent on the specified resource because it is already dependent.\r\n	Application	5003	Cluster	Error
%2 : Could not find an adapter.\r\n	System	5003	ndis	Error
No memory was available to allocate the storage for the computer name string.\r\nTrap will not be sent.\r\n	Application	5003	EvntAgnt	Warning
The cluster resource is not online.\r\n	Application	5004	Cluster	Error
%2 : Could not connect to the interrupt number supplied.\r\n	System	5004	ndis	Error
No memory was available to allocate the buffer for the varbind queue entry structure.\r\nTrap will not be sent.\r\n	Application	5004	EvntAgnt	Warning
A cluster node is not available for this operation.\r\n	Application	5005	Cluster	Error
%2 : Has encountered an internal error and has failed.\r\n	System	5005	ndis	Error
No memory was available to allocate the buffer for the varbind list.\r\nTrap will not be sent.\r\n	Application	5005	EvntAgnt	Warning
The cluster resource is not available.\r\n	Application	5006	Cluster	Error
%2 : The version number is incorrect for this driver.\r\n	System	5006	ndis	Error
No memory was available to allocate the buffer for the enterprise OID.\r\nTrap will not be sent.\r\n	Application	5006	EvntAgnt	Warning
The cluster resource could not be found.\r\n	Application	5007	Cluster	Error
%2 : Timed out during an operation.\r\n	System	5007	ndis	Warning
No memory was available to allocate the integer array for the enterprise OID.\r\nTrap will not be sent.\r\n	Application	5007	EvntAgnt	Warning
The cluster is being shut down.\r\n	Application	5008	Cluster	Error
%2 : Has encountered an invalid network address.\r\n	System	5008	ndis	Error
An attempt was made to convert a string to an OID, but the string contained non-numeric values.\r\nThe OID cannot be created. Trap will not be sent.\r\n	Application	5008	EvntAgnt	Warning
The event log time could not be converted from UCT to local time.\r\nGetTimeZoneInformation returned a value of %1. UCT time will be used in this trap.\r\n	Application	5009	EvntAgnt	Information
A cluster node cannot be evicted from the cluster while it is online.\r\n	Application	5009	Cluster	Error
%2 : Does not support the configuration supplied.\r\n	System	5009	ndis	Error
The object already exists.\r\n	Application	5010	Cluster	Error
%2 : The adapter has returned an invalid value to the driver.\r\n	System	5010	ndis	Error
Subj:   ** ADMINISTRATOR ALERT **\r\n	System	5010	System	Information
Unable to open the registry key for event source for %1. RegOpenKeyEx returned %2.\r\nTrap will not be sent.\r\n	Application	5010	EvntAgnt	Warning
The object is already in the list.\r\n	Application	5011	Cluster	Error
%2 : A required parameter is missing from the Registry.\r\n	System	5011	ndis	Error
Subj:   ** PRINTING NOTIFICATION **\r\n	System	5011	System	Error
Unable to open the registry key for event source for %1. RegOpenKeyEx returned %2.\r\nTrap will not be sent.\r\n	Application	5011	EvntAgnt	Warning
The cluster group is not available for any new requests.\r\n	Application	5012	Cluster	Error
%2 : The I/O base address supplied does not match the jumpers on the adapter.\r\n	System	5012	ndis	Error
Subj:   ** USER NOTIFICATION **\r\n	System	5012	System	Error
Unable to locate EventMessageFile for event source for %1. RegOpenKeyEx returned %2.\r\nTrap will not be sent.\r\n	Application	5012	EvntAgnt	Warning
Unable to locate ParameterMessageFile for event source for %1. RegOpenKeyEx returned %2.\r\n	Application	5013	EvntAgnt	Information
The cluster group could not be found.\r\n	Application	5013	Cluster	Error
%2 : The adapter is configured such that the receive space is smaller than\r\nthe maximum packet size.  Some packets may be lost.\r\n	System	5013	ndis	Information
From:   %1 at \\\\%2\r\n	System	5013	System	Information
The operation could not be completed because the cluster group is not online.\r\n	Application	5014	Cluster	Error
%2 : The adapter is disabled.  The driver cannot open the adapter.\r\n	System	5014	ndis	Warning
Print job %1 has been canceled while printing on %2.\r\n	System	5014	System	Error
Unable to expand file name in EventMessageFile for %1. Size needed is %2.\r\nTrap will not be sent.\r\n	Application	5014	EvntAgnt	Warning
The cluster node is not the owner of the resource.\r\n	Application	5015	Cluster	Error
Unable to expand file name in ParameterMessageFile for %1. Size needed is %2.\r\n	Application	5015	EvntAgnt	Information
%2 : There is an I/O port conflict.\r\n	System	5015	ndis	Warning
Print job %1 has been deleted and will not print.\r\n	System	5015	System	Error
The cluster node is not the owner of the group.\r\n	Application	5016	Cluster	Error
%2 : There is an I/O port or DMA channel conflict.\r\n	System	5016	ndis	Warning
Printing Complete\r\n\r\n%1 printed successfully on %2.\r\n	System	5016	System	Information
The cluster resource could not be created in the specified resource monitor.\r\n	Application	5017	Cluster	Error
Unable to load file name in ParameterMessageFile for %1. LoadLibraryEx returned %2.\r\n	Application	5017	EvntAgnt	Information
%2 : There is a memory conflict at address 0x%3.\r\n	System	5017	ndis	Warning
Print job %1 has not completed printing on %2.\r\n	System	5017	System	Error
The cluster resource could not be brought online by the resource monitor.\r\n	Application	5018	Cluster	Error
Unable to format message %1. FormatMessage returned %2.\r\nTrap will not be sent.\r\n	Application	5018	EvntAgnt	Warning
%2 : There is a interrupt conflict at interrupt number %3.\r\n	System	5018	ndis	Warning
Print job %1 has paused printing on %2.\r\n	System	5018	System	Error
The operation could not be completed because the cluster resource is online.\r\n	Application	5019	Cluster	Error
An error occurred freeing message DLL. FreeLibrary returned %1.\r\n	Application	5019	EvntAgnt	Information
%2 : There is a resource conflict at DMA channel %3.\r\n	System	5019	ndis	Warning
Print job %1 is now printing on %2.\r\n	System	5019	System	Information
The cluster resource could not be deleted or brought offline because it is the quorum resource.\r\n	Application	5020	Cluster	Error
Account name could not be located for this event. Unknown will be used.\r\nLookupAccountSid returned %1.\r\n	Application	5020	EvntAgnt	Information
%2 : The download file is invalid.  The driver is unable to load.\r\n	System	5020	ndis	Error
The printer is out of paper.\r\n	System	5020	System	Error
The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.\r\n	Application	5021	Cluster	Error
Local storage for buffer could not be freed. LocalFree returned %1. Potential memory leak.\r\n	Application	5021	EvntAgnt	Information
%2 : The specified Registry entry MaxReceives is out of range.  Using\r\ndefault value.\r\n	System	5021	ndis	Warning
The printer is offline.\r\n	System	5021	System	Error
The cluster software is shutting down.\r\n	Application	5022	Cluster	Error
Unable to post event completion to handle %1. SetEvent returned %2.\r\nTrap may not be sent.\r\n	Application	5022	EvntAgnt	Warning
%2 : The specified Registry entry MaxTransmits is out of range.  Using\r\ndefault value.\r\n	System	5022	ndis	Warning
Printing errors occurred.\r\n	System	5022	System	Error
The group or resource is not in the correct state to perform the requested operation.\r\n	Application	5023	Cluster	Error
ParameterMessageFile did not contain a substitution string for %1. Error code was %2.\r\n	Application	5023	EvntAgnt	Information
%2 : The specified Registry entry MaxFrameSize is out of range.  Using\r\ndefault value.\r\n	System	5023	ndis	Warning
There is a problem with the printer; please check it.\r\n	System	5023	System	Error
The properties were stored but not all changes will take effect until the next time the resource is brought online.\r\n	Application	5024	Cluster	Error
PrimaryModule did not contain a substitution string for %1. Error code was %2.\r\nThis secondary parameter will be removed.\r\n	Application	5024	EvntAgnt	Information
%2 : The specified Registry entry MaxInternalBufs is out of range.  Using\r\ndefault value.\r\n	System	5024	ndis	Warning
Print job %1 is being held from printing.\r\n	System	5024	System	Error
The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.\r\n	Application	5025	Cluster	Error
%2 : The specified Registry entry MaxMulticast is out of range.  Using\r\ndefault value.\r\n	System	5025	ndis	Warning
Print job %1 is queued for printing.\r\n	System	5025	System	Information
The cluster resource could not be deleted since it is a core resource.\r\n	Application	5026	Cluster	Error
%2 : The specified Registry entry ProductId is out of range.  Using\r\ndefault value.\r\n	System	5026	ndis	Warning
Print job %1 is being spooled.\r\n	System	5026	System	Information
The quorum resource failed to come online.\r\n	Application	5027	Cluster	Error
%2 : A Token Ring Lobe Wire Fault has occurred.  Verify cable\r\nconnections.  The adapter will continue to try to reinsert back\r\ninto the ring.\r\n	System	5027	ndis	Warning
Job was queued to %1 on %2\r\n	System	5027	System	Information
The quorum log could not be created or mounted successfully.\r\n	Application	5028	Cluster	Error
%2 : The adapter had detected a loss of signal on the ring.  The adapter\r\nwill continue to try to reinsert back into the ring.\r\n	System	5028	ndis	Warning
Size of job is %1 bytes.\r\n	System	5028	System	Information
The cluster log is corrupt.\r\n	Application	5029	Cluster	Error
%2 : The adapter has received a request to deinsert from the\r\nring.  The adapter will continue to try to reinsert back into the ring.\r\n	System	5029	ndis	Warning
The record could not be written to the cluster log since it exceeds the maximum size.\r\n	Application	5030	Cluster	Error
%2 : The adapter has successfully reinserted back into the ring.\r\n	System	5030	ndis	Information
To:     %1\r\n	System	5030	System	Information
The cluster log exceeds its maximum size.\r\n	Application	5031	Cluster	Error
%2 : The adapter has detected an Adapter Check as a result of some\r\nunrecoverable hardware or software error.  Please contact your service provider.\r\n	System	5031	ndis	Error
Date:   %1\r\n	System	5031	System	Information
No checkpoint record was found in the cluster log.\r\n	Application	5032	Cluster	Error
%2 : The adapter failed to reset within a specified time.  The adapter will\r\ncontinue to try to reset.  This could be the result of a hardware failure.\r\n	System	5032	ndis	Warning
The error code is %1.\r\nThere was an error retrieving the message. Make sure the file\r\nNET.MSG is available.\r\n	System	5032	System	Error
The minimum required disk space needed for logging is not available.\r\n	Application	5033	Cluster	Error
%2 : The adapter has detected that the Token Ring cable is disconnected from\r\nthe adapter.  Please reconnect the Token Ring cable.  The adapter will continue\r\nto try to reset until the connection is repaired.\r\n	System	5033	ndis	Warning
Printing Failed\r\n\r\n"%1" failed to print on %2 on %3.\r\n\r\nFor more help use the print troubleshooter.\r\n	System	5033	System	Error
The cluster node failed to take control of the quorum resource because the resource is owned by another active node.\r\n	Application	5034	Cluster	Error
%2 : The adapter has successfully completed a previously failed reset.\r\n	System	5034	ndis	Warning
Printing Failed\r\n\r\n"%1" failed to print on %2 on %3.  The Printer is %4.\r\n\r\nFor more help use the print troubleshooter.\r\n	System	5034	System	Error
A cluster network is not available for this operation.\r\n	Application	5035	Cluster	Error
Printing Complete\r\n\r\n"%1" printed successfully on %2 on %3.\r\n	System	5035	System	Information
A cluster node is not available for this operation.\r\n	Application	5036	Cluster	Error
All cluster nodes must be running to perform this operation.\r\n	Application	5037	Cluster	Error
A cluster resource failed.\r\n	Application	5038	Cluster	Error
The cluster node is not valid.\r\n	Application	5039	Cluster	Error
The cluster node already exists.\r\n	Application	5040	Cluster	Error
A node is in the process of joining the cluster.\r\n	Application	5041	Cluster	Error
January%0\r\n	System	5041	System	Information
The cluster node was not found.\r\n	Application	5042	Cluster	Error
February%0\r\n	System	5042	System	Information
The cluster local node information was not found.\r\n	Application	5043	Cluster	Error
The cluster network already exists.\r\n	Application	5044	Cluster	Error
The cluster network was not found.\r\n	Application	5045	Cluster	Error
The cluster network interface already exists.\r\n	Application	5046	Cluster	Error
The cluster network interface was not found.\r\n	Application	5047	Cluster	Error
The cluster request is not valid for this object.\r\n	Application	5048	Cluster	Error
August%0\r\n	System	5048	System	Information
The cluster network provider is not valid.\r\n	Application	5049	Cluster	Error
September%0\r\n	System	5049	System	Information
The cluster node is down.\r\n	Application	5050	Cluster	Error
October%0\r\n	System	5050	System	Information
The cluster node is not reachable.\r\n	Application	5051	Cluster	Error
November%0\r\n	System	5051	System	Information
The cluster node is not a member of the cluster.\r\n	Application	5052	Cluster	Error
December%0\r\n	System	5052	System	Information
A cluster join operation is not in progress.\r\n	Application	5053	Cluster	Error
The cluster network is not valid.\r\n	Application	5054	Cluster	Error
The cluster node is up.\r\n	Application	5056	Cluster	Error
The cluster IP address is already in use.\r\n	Application	5057	Cluster	Error
The cluster node is not paused.\r\n	Application	5058	Cluster	Error
No cluster security context is available.\r\n	Application	5059	Cluster	Error
The cluster network is not configured for internal cluster communication.\r\n	Application	5060	Cluster	Error
The cluster node is already up.\r\n	Application	5061	Cluster	Error
The cluster node is already down.\r\n	Application	5062	Cluster	Error
The cluster network is already online.\r\n	Application	5063	Cluster	Error
The cluster network is already offline.\r\n	Application	5064	Cluster	Error
The cluster node is already a member of the cluster.\r\n	Application	5065	Cluster	Error
The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.\r\n	Application	5066	Cluster	Error
One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.\r\n	Application	5067	Cluster	Error
This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.\r\n	Application	5068	Cluster	Error
The cluster quorum resource is not allowed to have any dependencies.\r\n	Application	5069	Cluster	Error
The cluster node is paused.\r\n	Application	5070	Cluster	Error
PRIMARY%0.\r\n	System	5070	System	Information
The cluster resource cannot be brought online. The owner node cannot run this resource.\r\n	Application	5071	Cluster	Error
BACKUP%0.\r\n	System	5071	System	Information
The cluster node is not ready to perform the requested operation.\r\n	Application	5072	Cluster	Error
WORKSTATION%0.\r\n	System	5072	System	Information
The cluster node is shutting down.\r\n	Application	5073	Cluster	Error
SERVER%0.\r\n	System	5073	System	Information
The cluster join operation was aborted.\r\n	Application	5074	Cluster	Error
The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.\r\n	Application	5075	Cluster	Error
This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.\r\n	Application	5076	Cluster	Error
The system configuration changed during the cluster join or form operation. The join or form operation was aborted.\r\n	Application	5077	Cluster	Error
The specified resource type was not found.\r\n	Application	5078	Cluster	Error
The specified node does not support a resource of this type.  This may be due to version inconsistencies or due to the absence of the resource DLL on this node.\r\n	Application	5079	Cluster	Error
The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.\r\n	Application	5080	Cluster	Error
System Default%0\r\n	System	5080	System	Information
No authentication package could be registered with the RPC server.\r\n	Application	5081	Cluster	Error
United States%0\r\n	System	5081	System	Information
You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.\r\n	Application	5082	Cluster	Error
Canada (French)%0\r\n	System	5082	System	Information
The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.\r\n	Application	5083	Cluster	Error
Latin America%0\r\n	System	5083	System	Information
The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.\r\n	Application	5084	Cluster	Error
Netherlands%0\r\n	System	5084	System	Information
A non locker code got a request to reserve the lock for making global updates.\r\n	Application	5085	Cluster	Error
Belgium%0\r\n	System	5085	System	Information
The quorum disk could not be located by the cluster service.\r\n	Application	5086	Cluster	Error
France%0\r\n	System	5086	System	Information
The backed up cluster database is possibly corrupt.\r\n	Application	5087	Cluster	Error
A DFS root already exists in this cluster node.\r\n	Application	5088	Cluster	Error
Switzerland%0\r\n	System	5088	System	Information
An attempt to modify a resource property failed because it conflicts with another existing property.\r\n	Application	5089	Cluster	Error
United Kingdom%0\r\n	System	5089	System	Information
Denmark%0\r\n	System	5091	System	Information
Sweden%0\r\n	System	5092	System	Information
Norway%0\r\n	System	5093	System	Information
Germany%0\r\n	System	5094	System	Information
Australia%0\r\n	System	5095	System	Information
China (PRC)%0\r\n	System	5098	System	Information
OpenDsisPerformanceData routine completed successfully.\r\n	Application	5099	Perfctrs	Information
Taiwan%0\r\n	System	5099	System	Information
CollectDsisPerformanceData routine entered.\r\n	Application	5100	Perfctrs	Information
Unable to convert Unicode CPU name to ASCII.\r\n	Application	5101	Perfctrs	Error
Portugal%0\r\n	System	5101	System	Information
Allocating the internal data structure for a foriegn CPU.\r\n	Application	5102	Perfctrs	Information
Finland%0\r\n	System	5102	System	Information
Unable to allocate internal storage for this foreign CPU.\r\n	Application	5103	Perfctrs	Error
Arabic%0\r\n	System	5103	System	Information
Initializing data in foreign CPU data structure.\r\n	Application	5104	Perfctrs	Information
Hebrew%0\r\n	System	5104	System	Information
Attempting to open an SNMP link to foreign computer.\r\n	Application	5105	Perfctrs	Information
Unable to establish SNMP link to foreign computer.\r\n	Application	5106	Perfctrs	Error
SNMP link to foreign computer established.\r\n	Application	5107	Perfctrs	Information
Using previously opened SNMP Link to Foreign Computer.\r\n	Application	5108	Perfctrs	Information
Unable to get data from foreign computer. SNMP Error Status and Error Index are returned in the Data.\r\n	Application	5109	Perfctrs	Error
Data successfully retrieved from foreign computer\r\n	Application	5110	Perfctrs	Information
Buffer passed to receive data from foreign computer was not large enough.\r\n	Application	5111	Perfctrs	Warning
SNMP socket is busy. Subsequent calls to SNMP services may fail.\r\n	Application	5112	Perfctrs	Warning
A power failure has occurred at %1.  Please terminate all activity with this server.\r\n	System	5150	System	Error
Power has been restored at %1.  Normal operations have resumed.\r\n	System	5151	System	Information
The UPS service is starting shut down at %1.\r\n	System	5152	System	Error
The UPS service is about to perform final shut down.\r\n	System	5153	System	Error
The Workstation must be started with the NET START command.\r\n	System	5170	System	Error
Remote IPC%0\r\n	System	5175	System	Information
Remote Admin%0\r\n	System	5176	System	Information
Default share%0\r\n	System	5177	System	Information
CollectDsisPerformanceData routine completed successfully\r\n	Application	5199	Perfctrs	Information
CloseDsisPerformanceData routine entered.\r\n	Application	5200	Perfctrs	Information
Unable to close SNMP session\r\n	Application	5201	Perfctrs	Error
The password entered is longer than 14 characters.  Computers \r\nwith Windows prior to Windows 2000 will not be able to use \r\nthis account. Do you want to continue this operation? %1: %0\r\n	System	5280	System	Information
%1 has a remembered connection to %2. Do you\r\nwant to overwrite the remembered connection? %3: %0\r\n	System	5281	System	Information
Do you want to resume loading the profile?  The command which\r\ncaused the error will be ignored. %1: %0\r\n	System	5282	System	Error
Do you want to continue this operation? %1: %0\r\n	System	5283	System	Information
Do you want to add this? %1: %0\r\n	System	5284	System	Information
Do you want to continue this operation? %1: %0\r\n	System	5285	System	Information
Is it OK to start it? %1: %0\r\n	System	5286	System	Information
Do you want to start the Workstation service? %1: %0\r\n	System	5287	System	Error
Is it OK to continue disconnecting and force them closed? %1: %0\r\n	System	5288	System	Error
The printer does not exist.  Do you want to create it? %1: %0\r\n	System	5290	System	Error
Dsis interface closed.\r\n	Application	5299	Perfctrs	Information
The network control block (NCB) request completed successfully.\r\nThe NCB is the data.\r\n	System	5300	System	Information
Illegal network control block (NCB) buffer length on SEND DATAGRAM,\r\nSEND BROADCAST, ADAPTER STATUS, or SESSION STATUS.\r\nThe NCB is the data.\r\n	System	5301	System	Error
The data descriptor array specified in the network control block (NCB) is\r\ninvalid.  The NCB is the data.\r\n	System	5302	System	Error
The command specified in the network control block (NCB) is illegal.\r\nThe NCB is the data.\r\n	System	5303	System	Error
The message correlator specified in the network control block (NCB) is\r\ninvalid.  The NCB is the data.\r\n	System	5304	System	Error
A network control block (NCB) command timed-out.  The session may have\r\nterminated abnormally.  The NCB is the data.\r\n	System	5305	System	Error
An incomplete network control block (NCB) message was received.\r\nThe NCB is the data.\r\n	System	5306	System	Error
The buffer address specified in the network control block (NCB) is illegal.\r\nThe NCB is the data.\r\n	System	5307	System	Information
The session number specified in the network control block (NCB) is not active.\r\nThe NCB is the data.\r\n	System	5308	System	Information
No resource was available in the network adapter.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5309	System	Error
The session specified in the network control block (NCB) was closed.\r\nThe NCB is the data.\r\n	System	5310	System	Error
The network control block (NCB) command was canceled.\r\nThe NCB is the data.\r\n	System	5311	System	Error
The message segment specified in the network control block (NCB) is\r\nillogical.  The NCB is the data.\r\n	System	5312	System	Error
The name already exists in the local adapter name table.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5313	System	Information
The network adapter name table is full.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5314	System	Information
The network name has active sessions and is now de-registered.\r\nThe network control block (NCB) command completed.  The NCB is the data.\r\n	System	5315	System	Information
A previously issued Receive Lookahead command is active\r\nfor this session.  The network control block (NCB) command was rejected.\r\nThe NCB is the data.\r\n	System	5316	System	Information
The local session table is full. The network control block (NCB) request was refused.\r\nThe NCB is the data.\r\n	System	5317	System	Information
A network control block (NCB) session open was rejected.  No LISTEN is outstanding\r\non the remote computer.  The NCB is the data.\r\n	System	5318	System	Information
The name number specified in the network control block (NCB) is illegal.\r\nThe NCB is the data.\r\n	System	5319	System	Information
The call name specified in the network control block (NCB) cannot be found or\r\ndid not answer.  The NCB is the data.\r\n	System	5320	System	Information
The name specified in the network control block (NCB) was not found.  Cannot put '*' or\r\n00h in the NCB name.  The NCB is the data.\r\n	System	5321	System	Information
The name specified in the network control block (NCB) is in use on a remote adapter.\r\nThe NCB is the data.\r\n	System	5322	System	Information
The name specified in the network control block (NCB) has been deleted.\r\nThe NCB is the data.\r\n	System	5323	System	Information
The session specified in the network control block (NCB) ended abnormally.\r\nThe NCB is the data.\r\n	System	5324	System	Information
The network protocol has detected two or more identical\r\nnames on the network.\tThe network control block (NCB) is the data.\r\n	System	5325	System	Information
An unexpected protocol packet was received.  There may be an\r\nincompatible remote device.  The network control block (NCB) is the data.\r\n	System	5326	System	Error
The NetBIOS interface is busy.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5333	System	Information
There are too many network control block (NCB) commands outstanding.\r\nThe NCB request was refused.  The NCB is the data.\r\n	System	5334	System	Information
The adapter number specified in the network control block (NCB) is illegal.\r\nThe NCB is the data.\r\n	System	5335	System	Information
The network control block (NCB) command completed while a cancel was occurring.\r\nThe NCB is the data.\r\n	System	5336	System	Information
The name specified in the network control block (NCB) is reserved.\r\nThe NCB is the data.\r\n	System	5337	System	Information
The network control block (NCB) command is not valid to cancel.\r\nThe NCB is the data.\r\n	System	5338	System	Information
There are multiple network control block (NCB) requests for the same session.\r\nThe NCB request was refused.  The NCB is the data.\r\n	System	5351	System	Information
There has been a network adapter error. The only NetBIOS\r\ncommand that may be issued is an NCB RESET. The network control block (NCB) is\r\nthe data.\r\n	System	5352	System	Error
The maximum number of applications was exceeded.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5354	System	Information
The requested resources are not available.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5356	System	Information
A system error has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5364	System	Error
A ROM checksum failure has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5365	System	Information
A RAM test failure has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5366	System	Information
A digital loopback failure has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5367	System	Information
An analog loopback failure has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5368	System	Information
An interface failure has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5369	System	Information
An unrecognized network control block (NCB) return code was received.\r\nThe NCB is the data.\r\n	System	5370	System	Information
A network adapter malfunction has occurred.\r\nThe network control block (NCB) request was refused.  The NCB is the data.\r\n	System	5380	System	Error
The network control block (NCB) command is still pending.\r\nThe NCB is the data.\r\n	System	5381	System	Information
The update log on %1 is over 80%% capacity. The primary\r\ndomain controller %2 is not retrieving the updates.\r\n	System	5500	System	Information
The update log on %1 is full, and no further updates\r\ncan be added until the primary domain controller %2\r\nretrieves the updates.\r\n	System	5501	System	Information
The time difference with the primary domain controller %1\r\nexceeds the maximum allowed skew of %2 seconds.\r\n	System	5502	Alerter	Error
The account of user %1 has been locked out on %2\r\ndue to %3 bad password attempts.\r\n	System	5503	Alerter	Error
The %1 log file cannot be opened.\r\n	System	5504	Alerter	Error
The %1 log file is corrupted and will be cleared.\r\n	System	5505	System	Information
The Application log file could not be opened.  %1 will be used as the\r\ndefault log file.\r\n	System	5506	System	Information
The %1 Log is full.  If this is the first time you have seen this\r\nmessage take the following steps:%n\r\nStart, Settings, Control Panel, Administrative Tools, Event Viewer%n\r\nSelect %1 Log, from the action menu choose Clear All Events, choose not\r\n	System	5507	System	Information
The security database full synchronization has been initiated by the server %1.\r\n	System	5508	System	Information
Windows 2000 could not be started as configured.\r\nA previous working configuration was used instead.\r\n	System	5509	System	Information
The exception 0x%1 occurred in the application %2 at location 0x%3.\r\n	System	5510	System	Information
The servers %1 and  %3 both claim to be an NT Domain Controller for\r\nthe %2 domain. One of the servers should be removed from the\r\ndomain because the servers have different security identifiers\r\n(SID).\r\n	System	5511	Alerter	Error
The server %1 and %2 both claim to be the primary domain\r\ncontroller for the %3 domain. One of the servers should be\r\ndemoted or removed from the domain.\r\n	System	5512	Alerter	Error
The computer %1 tried to connect to the server %2 using\r\nthe trust relationship established by the %3 domain. However, the\r\ncomputer lost the correct security identifier (SID)\r\nwhen the domain was reconfigured. Reestablish the trust\r\nrelationship.	System	5513	Alerter	Error
The computer has rebooted from a bugcheck.  The bugcheck was:\r\n%1.\r\n%2\r\nA full dump was not saved.\r\n	System	5514	System	Information
The computer has rebooted from a bugcheck.  The bugcheck was:\r\n%1.\r\n%2\r\nA dump was saved in: %3.\r\n	System	5515	System	Information
The computer or domain %1 trusts domain %2.  (This may be an indirect\r\ntrust.)  However, %1 and %2 have the same machine security identifier\r\n(SID).  NT should be re-installed on either %1 or %2.\r\n	System	5516	System	Information
The computer or domain %1 trusts domain %2.  (This may be an indirect\r\ntrust.)  However, %2 is not a valid name for a trusted domain.\r\nThe name of the trusted domain should be changed to a valid name.\r\n	System	5517	System	Information
Could not share the User or Script path.\r\n	System	5600	System	Information
The password for this computer is not found in the local security\r\ndatabase.\r\n	System	5601	System	Error
An internal error occurred while accessing the computer's\r\nlocal or network security database.\r\n	System	5602	System	Error
The Netlogon service could not initialize the replication data\r\nstructures successfully. The service was terminated.  The following\r\nerror occurred: %n%1\r\n	System	5700	NetLogon	Error
The Netlogon service failed to update the domain trust list.  The\r\nfollowing error occurred: %n%1\r\n	System	5701	NetLogon	Error
The Netlogon service could not add the RPC interface.  The\r\nservice was terminated. The following error occurred: %n%1\r\n	System	5702	NetLogon	Error
The Netlogon service could not read a mailslot message from %1 due\r\nto the following error: %n%2\r\n	System	5703	NetLogon	Error
The Netlogon service failed to register the service with the\r\nservice controller. The service was terminated. The following\r\nerror occurred: %n%1\r\n	System	5704	NetLogon	Error
The change log cache maintained by the Netlogon service for\r\ndatabase changes is corrupted. The Netlogon service is resetting\r\nthe change log.\r\n	System	5705	NetLogon	Error
The Netlogon service could not create server share %1.  The following\r\nerror occurred: %n%2\r\n	System	5706	NetLogon	Error
The down-level logon request for the user %1 from %2 failed.\r\n	System	5707	NetLogon	Error
The down-level logoff request for the user %1 from %2 failed.\r\n	System	5708	NetLogon	Error
The Windows NT or Windows 2000 %1 logon request for the user %2\\%3 from %4 (via %5)\r\nfailed.\r\n	System	5709	NetLogon	Error
The Windows NT or Windows 2000 %1 logoff request for the user %2\\%3 from %4\r\nfailed.\r\n	System	5710	NetLogon	Error
The partial synchronization request from the server %1 completed\r\nsuccessfully. %2 changes(s) has(have) been returned to the\r\ncaller.\r\n	System	5711	System	Information
The partial synchronization request from the server %1 failed with\r\nthe following error: %n%2\r\n	System	5712	NetLogon	Error
The full synchronization request from the server %1 completed\r\nsuccessfully. %2 object(s) has(have) been returned to\r\nthe caller.\r\n	System	5713	System	Information
The full synchronization request from the server %1 failed with\r\nthe following error: %n%2\r\n	System	5714	NetLogon	Error
The partial synchronization replication of the %1 database from the\r\nprimary domain controller %2 completed successfully. %3 change(s) is(are)\r\napplied to the database.\r\n	System	5715	System	Error
The partial synchronization replication of the %1 database from the\r\nprimary domain controller %2 failed with the following error: %n%3\r\n	System	5716	System	Error
The full synchronization replication of the %1 database from the\r\nprimary domain controller %2 completed successfully.\r\n	System	5717	System	Error
The full synchronization replication of the %1 database from the\r\nprimary domain controller %2 failed with the following error: %n%3\r\n	System	5718	NetLogon	Error
No Windows NT or Windows 2000 Domain Controller is available for domain %1.\r\nThe following error occurred:%n%2\r\n	System	5719	NetLogon	Error
The session setup to the Windows NT or Windows 2000 Domain Controller %1 for the domain %2\r\nfailed because the computer %3 does not have a local security database account.\r\n	System	5720	System	Error
The session setup to the Windows NT or Windows 2000 Domain Controller %1 for the domain %2\r\nfailed because the Windows NT Domain Controller does not have an account\r\nfor the computer %3.\r\n	System	5721	System	Information
The session setup from the computer %1 failed to authenticate.\r\nThe name of the account referenced in the security database is\r\n%2.  The following error occurred: %n%3\r\n	System	5722	NetLogon	Error
The session setup from the computer %1 failed because there is\r\nno trust account in the security database for this computer. The name of\r\nthe account referenced in the security database is %2.\r\n	System	5723	NetLogon	Error
Could not register control handler with service controller %1.\r\n	System	5724	NetLogon	Error
Could not set service status with service controller %1.\r\n	System	5725	NetLogon	Error
Could not find the computer name %1.\r\n	System	5726	NetLogon	Error
Could not load %1 device driver.\r\n	System	5727	NetLogon	Error
Could not load any transport.\r\n	System	5728	NetLogon	Error
Replication of the %1 Domain Object "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5729	System	Information
Replication of the %1 Global Group "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5730	System	Information
Replication of the %1 Local Group "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5731	System	Information
Replication of the %1 User "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5732	System	Information
Replication of the %1 Policy Object "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5733	System	Information
Replication of the %1 Trusted Domain Object "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5734	System	Information
Replication of the %1 Account Object "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5735	System	Information
Replication of the %1 Secret "%2" from primary domain controller\r\n%3 failed with the following error: %n%4\r\n	System	5736	System	Information
The system returned the following unexpected error code: %n%1\r\n	System	5737	System	Information
Netlogon has detected two machine accounts for server &quot;%1&quot;.\r\nThe server can be either a Windows 2000 Server that is a member of the\r\ndomain or the server can be a LAN Manager server with an account in the\r\nSERVERS global group.  It cannot	System	5738	NetLogon	Error
This domain has more global groups than can be replicated to a LanMan\r\nBDC.  Either delete some of your global groups or remove the LanMan\r\nBDCs from the domain.\r\n	System	5739	System	Information
The Browser driver returned the following error to Netlogon: %n%1\r\n	System	5740	NetLogon	Error
Netlogon could not register the %1<1B> name for the following reason: %n%2\r\n	System	5741	NetLogon	Error
Service failed to retrieve messages needed to boot remote boot clients.\r\n	System	5742	System	Information
Service experienced a severe error and can no longer provide remote boot\r\nfor 3Com 3Start remote boot clients.\r\n	System	5743	System	Information
Service experienced a severe system error and will shut itself down.\r\n	System	5744	System	Error
Client with computer name %1 failed to acknowledge receipt of the\r\nboot data.  Remote boot of this client was not completed.\r\n	System	5745	System	Information
Client with computer name %1 was not booted due to an error in opening\r\nfile %2.\r\n	System	5746	System	Information
Client with computer name %1 was not booted due to an error in reading\r\nfile %2.\r\n	System	5747	System	Information
Client with computer name %1 was not booted due to insufficent memory\r\nat the remote boot server.\r\n	System	5748	System	Error
Client with computer name %1 will be booted without using checksums\r\nbecause checksum for file %2 could not be calculated.\r\n	System	5749	System	Information
Client with computer name %1 was not booted due to too many lines in\r\nfile %2.\r\n	System	5750	System	Information
Client with computer name %1 was not booted because the boot block\r\nconfiguration file %2 for this client does not contain boot block\r\nline and/or loader line.\r\n	System	5751	System	Information
Client with computer name %1 was not booted due to a bad size of\r\nfile %2.\r\n	System	5752	System	Information
Client with computer name %1 was not booted due to remote boot\r\nservice internal error.\r\n	System	5753	System	Information
Client with computer name %1 was not booted because file %2 has an\r\ninvalid boot header.\r\n	System	5754	System	Information
Client with computer name %1 was not booted due to network error.\r\n	System	5755	System	Information
Client with adapter id %1 was not booted due to lack of resources.\r\n	System	5756	System	Information
Service experienced error copying file or directory %1.\r\n	System	5757	System	Information
Service experienced error deleting file or directory %1.\r\n	System	5758	System	Information
Service experienced error setting permissions on file or directory %1.\r\n	System	5759	System	Information
Service experienced error evaluating RPL configurations.\r\n	System	5760	System	Information
Service experienced error creating RPL profiles for all configurations.\r\n	System	5761	System	Information
Service experienced error accessing registry.\r\n	System	5762	System	Information
Service experienced error replacing possibly outdated RPLDISK.SYS.\r\n	System	5763	System	Information
Service experienced error adding security accounts or setting\r\nfile permissions.  These accounts are the RPLUSER local group\r\nand the user accounts for the individual RPL workstations.\r\n	System	5764	System	Information
Service failed to back up its database.\r\n	System	5765	System	Information
Service failed to initialize from its database.  The database may be\r\nmissing or corrupted.  Service will attempt restoring the database\r\nfrom the backup.\r\n	System	5766	System	Information
Service failed to restore its database from the backup.  Service\r\nwill not start.\r\n	System	5767	System	Information
Service sucessfully restored its database from the backup.\r\n	System	5768	System	Information
Service failed to initialize from its restored database.  Service\r\nwill not start.\r\n	System	5769	System	Information
The session setup to the Windows NT or Windows 2000  Domain Controller %1 from computer\r\n%2 using account %4 failed.  %2 is declared to be a BDC in domain %3.\r\nHowever, %2 tried to connect as either a DC in a trusted domain,\r\na member workstation in	System	5770	System	Information
The Remoteboot database was in NT 3.5 / NT 3.51 format and NT is\r\nattempting to convert it to NT 4.0 format. The JETCONV converter\r\nwill write to the Application event log when it is finished.\r\n	System	5771	System	Information
Global group SERVERS exists in domain %1 and has members.\r\nThis group defines Lan Manager BDCs in the domain.\r\nLan Manager BDCs are not permitted in NT domains.\r\n	System	5772	System	Information
The DNS server for this DC does not support dynamic DNS.\r\nAdd the DNS records from the file '%SystemRoot%\\System32\\Config\\netlogon.dns'\r\nto the DNS server serving the domain referenced in that file.\r\n	System	5773	System	Information
Registration of the DNS record '%1' failed with the following error: %n%2\r\n	System	5774	System	Information
Deregistration of the DNS record '%1' failed with the following error: %n%2\r\n	System	5775	System	Information
Failed to create/open file %1 with the following error: %n%2\r\n	System	5776	System	Information
Netlogon got the following error while trying to get the subnet to site\r\nmapping information from the DS: %n%1\r\n	System	5777	System	Information
'%1' tried to determine its site by looking up its IP address ('%2')\r\nin the Configuration\\Sites\\Subnets container in the DS.  No subnet matched\r\nthe IP address.  Consider adding a subnet object for this IP address.\r\n	System	5778	System	Information
The site name for this computer is '%1'.  That site name is not a valid\r\nsite name.  A site name must be a valid DNS label.\r\nRename the site to be a valid name.\r\n	System	5779	System	Information
The subnet object '%1' appears in the Configuration\\Sites\\Subnets\r\ncontainer in the DS.  The name is not syntactically valid.  The valid\r\nsyntax is xx.xx.xx.xx/yy where xx.xx.xx.xx is a valid IP subnet number\r\nand yy is the number of bits in the s	System	5780	System	Information
Dynamic registration or deregistration of one or more DNS records failed because no DNS servers are available.\r\n	System	5781	System	Information
Dynamic registration or deregistration of one or more DNS records failed with the following error: %n%1\r\n	System	5782	System	Information
The session setup to the Windows NT or Windows 2000 Domain Controller %1 for the domain %2\r\nis not responsive.  The current RPC call from Netlogon on \\\\%3 to %1 has been cancelled.\r\n	System	5783	System	Information
Site '%2' does not have any Domain Controllers for domain '%3'.\r\nDomain Controllers in site '%1' have been automatically\r\nselected to cover site '%2' based on configured Directory Server\r\nreplication costs.\r\n	System	5784	System	Information
This Domain Controller no longer automatically covers site '%1'.\r\n	System	5785	System	Information
Site '%2' does not have any Global Catalog servers.\r\nGlobal Catalog servers in site '%1' have been automatically\r\nselected to cover site '%2' based on configured Directory Server\r\nreplication costs.\r\n	System	5786	System	Information
This Global Catalog server no longer automatically covers site '%1'.\r\n	System	5787	System	Information
Attempt to update Service Principal Name (SPN) of the computer object \r\nin Active Directory failed.  The following error occurred: %n%1\r\n	System	5788	System	Information
Attempt to update DNS Host Name of the computer object \r\nin Active Directory failed.  The following error occurred: %n%1\r\n	System	5789	System	Information
OpenMutex failed for object %1, reason code %2.\r\nTrap will not be sent.\r\n	Application	6000	EvntAgnt	Warning
The specified file could not be encrypted.\r\n	System	6000	EFS	Error
The %1 log file is full.\r\n	System	6000	EventLog	Error
Mutex object has been abandoned.\r\nTrap will not be sent.\r\n	Application	6001	EvntAgnt	Warning
The specified file could not be decrypted.\r\n	System	6001	EFS	Error
The %1 log file cannot be opened.\r\n	System	6001	EventLog	Error
The Macintosh-Accessible volume name specified is invalid.\r\nSpecify a valid volume name without colons.\r\n	System	6001	MacFile	Error
Mutex object could not be released. Reason code is %1.\r\nTrap may not be sent.\r\n	Application	6002	EvntAgnt	Warning
The specified file is encrypted and the user does not have the ability to decrypt it.\r\n	System	6002	EFS	Error
The %1 log file is corrupted and will be cleared.\r\n	System	6002	EventLog	Error
A system resource could not be accessed for the current descriptor.\r\nTry the operation again.\r\n	System	6002	MacFile	Error
WaitForMultipleObjects returned an unknown error condition.\r\nTrap will not be sent.\r\n	Application	6003	EvntAgnt	Warning
There is no valid encryption recovery policy configured for this system.\r\n	System	6003	EFS	Error
The Application log file could not be opened.  %1 will be used as the default\r\nlog file.\r\n	System	6003	EventLog	Error
The parameter entered was invalid. \r\nMake the appropriate changes and retry the operation.\r\n	System	6003	MacFile	Error
GetExitCodeThread returned FALSE, reason code is %1.\r\n	Application	6004	EvntAgnt	Warning
The required encryption driver is not loaded for this system.\r\n	System	6004	EFS	Error
A driver packet received from the I/O subsystem was invalid.  The data is the\r\npacket.\r\n	System	6004	EventLog	Error
Error in accessing Macintosh Code Page.\r\nCheck if the Code Page file name specified in\r\nSYSTEM\\CurrentControlSet\\Control\\Nls\\CodePage\\MACCP is valid and exists.\r\nStop and restart the service if the code page information is modified.\r\n	System	6004	MacFile	Error
Error allocating storage for Count/Time table entry.\r\nTrap will not be sent.\r\n	Application	6005	EvntAgnt	Warning
The file was encrypted with a different encryption driver than is currently loaded.\r\n	System	6005	EFS	Error
The Event log service was started.\r\n	System	6005	EventLog	Information
The server name specified is invalid.\r\nSpecify a valid server name without colons.\r\n	System	6005	MacFile	Error
Error allocating storage for variable bindings.\r\nTrap will not be sent.\r\n	Application	6006	EvntAgnt	Warning
There are no EFS keys defined for the user.\r\n	System	6006	EFS	Error
The Event log service was stopped.\r\n	System	6006	EventLog	Information
A volume with this name already exists.\r\nSpecify another name for the new volume.\r\n	System	6006	MacFile	Error
Error allocating storage for message DLL insertion string array.\r\nTrap will not be sent.\r\n	Application	6007	EvntAgnt	Warning
The specified file is not encrypted.\r\n	System	6007	EFS	Error
Eventlog Service %0\r\n	System	6007	EventLog	Information
The selected Macintosh-Accessible volume is currently in use by Macintoshes.\r\nThe selected volume may be removed only when no Macintosh workstations are\r\nconnected to it.\r\n	System	6007	MacFile	Error
Error allocating storage for message DLL insertion string length array.\r\nTrap will not be sent.\r\n	Application	6008	EvntAgnt	Warning
The specified file is not in the defined EFS export format.\r\n	System	6008	EFS	Error
The previous system shutdown at %1 on %2 was unexpected.\r\n	System	6008	EventLog	Error
Not used\r\nAn internal error 6008 (VolumeReadOnly) occurred.\r\n	System	6008	MacFile	Error
Error allocating storage for message DLL insertion strings.\r\nTrap will not be sent.\r\n	Application	6009	EvntAgnt	Warning
The specified file is read only.\r\n	System	6009	EFS	Error
Microsoft (R) Windows 2000 (R) %1 %2 %3 %4.\r\n	System	6009	EventLog	Information
The selected directory does not belong to a Macintosh-Accessible volume.\r\nThe Macintosh view of directory permissions is only available for\r\ndirectories that are part of a Macintosh-Accessible volume.\r\n	System	6009	MacFile	Error
Too many insertion strings. First %1 used.\r\n	Application	6010	EvntAgnt	Information
The directory has been disabled for encryption.\r\n	System	6010	EFS	Error
The %1 service was unable to set up an event source.\r\n	System	6010	EventLog	Error
The Macintosh view of directory permissions is not available for directories\r\non CD-ROM disks.\r\n	System	6010	MacFile	Error
Cannot specify SNMP Event Log Extension Agent DLL events as trap generators.\r\nThis trap is ignored.\r\n	Application	6011	EvntAgnt	Warning
The server is not trusted for remote encryption operation.\r\n	System	6011	EFS	Error
Insufficient memory resources to complete the operation.\r\nTry the operation again.\r\n	System	6011	MacFile	Error
Unable to copy varbind entry during trap buffer trimming.\r\nTrap will not be sent.\r\n	Application	6012	EvntAgnt	Warning
This file extension is already associated with a Creator/Type item.\r\n	System	6012	MacFile	Error
Attempt to reduce trap buffer size failed.\r\nTrap will not be sent.\r\n	Application	6013	EvntAgnt	Warning
File Server for Macintosh service only supports NTFS partitions.\r\nChoose a directory on an NTFS partition.\r\n	System	6013	MacFile	Error
The amount of data required to be trimmed is larger than the entire trap.\r\nTrap will not be sent.\r\n	Application	6014	EvntAgnt	Warning
The message has been sent, but not all of the connected workstations have\r\nreceived it. Some workstations are running an unsupported version of\r\nsystem software.\r\n	System	6014	MacFile	Error
The File Server is in an invalid state for the operation being performed.\r\nCheck the status of the File Server for Macintosh service and retry the \r\noperation.\r\n	System	6015	MacFile	Error
Cannot create a Macintosh-Accessible volume within another volume.\r\nChoose a directory that is not within a volume.\r\n	System	6016	MacFile	Error
The target server is not setup to accept Remote Procedure Calls.\r\n	System	6017	MacFile	Error
The selected Creator/Type item already exists.\r\n	System	6018	MacFile	Error
The selected Creator/Type item no longer exists.\r\nThis item may have been deleted by another administrator.\r\n	System	6019	MacFile	Error
The default Creator/Type item cannot be deleted.\r\n	System	6020	MacFile	Error
The default Creator/Type item may not be edited.\r\n	System	6021	MacFile	Error
The Creator/Type item is invalid and will not be use by the File Server\r\nfor Macintosh service.\r\nThe invalid Creator/Type item is in the data.\r\n	System	6022	MacFile	Error
The file extension is invalid.\r\nThe invalid file extension is in the data.\r\n	System	6023	MacFile	Error
Too many Extension/Type Creator mappings than the system can handle.\r\nSystem limit is 2147483647 mappings.\r\n	System	6024	MacFile	Error
The password specified is invalid.\r\nSpecify a valid password less than 8 characters.\r\n	System	6025	MacFile	Error
The selected Macintosh-Accessible volume no longer exists.\r\nAnother administrator may have removed the selected volume.\r\n	System	6026	MacFile	Error
Neither the Owner nor the Primary Group account names are valid.\r\nSpecify valid account names for the Owner and Primary Group of\r\nthis directory.\r\n	System	6027	MacFile	Error
The Owner account name is invalid. \r\nSpecify a valid account name or the Owner of this directory.\r\n	System	6028	MacFile	Error
The Primary Group account name is invalid. \r\nSpecify a valid account name for the Primary Group of this directory.\r\n	System	6029	MacFile	Error
The Logon Message entered for the File Server for Macintosh was invalid. \r\nLogon Message should not be greater than 199 characters.\r\nMake the appropriate changes and retry the operation.\r\n	System	6030	MacFile	Error
The User Limit entered for the Share Volume was invalid. \r\nEnter a number between 0 and 4294967295.\r\nMake the appropriate changes and retry the operation.\r\n	System	6031	MacFile	Error
The Sessions Limit field entered for the File Server was invalid. \r\nEnter a number between 0 and 4294967295.\r\nMake the appropriate changes and retry the operation.\r\n	System	6032	MacFile	Error
The server name specified is not of valid length.\r\nSpecify a server name containing not more than 31 single-byte characters \r\nor not more than 15 double-byte characters.\r\n	System	6033	MacFile	Error
A uniprocessor-specific driver was loaded on a multiprocessor system.  The driver could not load.\r\n	System	6100	System	Error
The list of servers for this workgroup is not currently available\r\n	System	6118	EFS	Error
The Task Scheduler service must be configured to run in the System account to function properly.  Individual tasks may be configured to run in other accounts.\r\n	System	6200	Schedule	Error
The %1 service failed to start due to the following error: %n%2\r\n	System	7000	Service Control Manager	Error
The specified session name is invalid.\r\n	Application	7001	Terminal Server	Error
The %1 service depends on the %2 service which failed to start because of the following error: %n%3\r\n	System	7001	Service Control Manager	Error
The specified protocol driver is invalid.\r\n	Application	7002	Terminal Server	Error
The %1 service depends on the %2 group and no member of this group started.\r\n	System	7002	Service Control Manager	Error
The specified protocol driver was not found in the system path.\r\n	Application	7003	Terminal Server	Error
The %1 service depends on the following nonexistent service: %2\r\n	System	7003	Service Control Manager	Error
The specified terminal connection driver was not found in the system path.\r\n	Application	7004	Terminal Server	Error
A registry key for event logging could not be created for this session.\r\n	Application	7005	Terminal Server	Error
The %1 call failed with the following error: %n%2\r\n	System	7005	Service Control Manager	Error
A service with the same name already exists on the system.\r\n	Application	7006	Terminal Server	Error
The %1 call failed for %2 with the following error: %n%3\r\n	System	7006	Service Control Manager	Error
A close operation is pending on the session.\r\n	Application	7007	Terminal Server	Error
The system reverted to its last known good configuration.  The system is restarting....\r\n	System	7007	Service Control Manager	Information
There are no free output buffers available.\r\n	Application	7008	Terminal Server	Error
No backslash is in the account name.\r\n	System	7008	Service Control Manager	Error
The MODEM.INF file was not found.\r\n	Application	7009	Terminal Server	Error
Timeout (%1 milliseconds) waiting for the %2 service to connect.\r\n	System	7009	Service Control Manager	Error
The modem name was not found in MODEM.INF.\r\n	Application	7010	Terminal Server	Error
Timeout (%1 milliseconds) waiting for ReadFile.\r\n	System	7010	Service Control Manager	Error
The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.\r\n	Application	7011	Terminal Server	Error
Timeout (%1 milliseconds) waiting for a transaction response from the %2 service.\r\n	System	7011	Service Control Manager	Error
The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on.\r\n	Application	7012	Terminal Server	Error
Message returned in transaction has incorrect size.\r\n	System	7012	Service Control Manager	Error
Carrier detect has failed or carrier has been dropped due to disconnect.\r\n	Application	7013	Terminal Server	Error
Logon attempt with current password failed with the following error: %n%1\r\n	System	7013	Service Control Manager	Error
Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.\r\n	Application	7014	Terminal Server	Error
Second logon attempt with old password also failed with the following error: %n%1\r\n	System	7014	Service Control Manager	Error
Busy signal detected at remote site on callback.\r\n	Application	7015	Terminal Server	Error
Boot-start or system-start driver (%1) must not depend on a service.\r\n	System	7015	Service Control Manager	Error
Voice detected at remote site on callback.\r\n	Application	7016	Terminal Server	Error
The %1 service has reported an invalid current state %2.\r\n	System	7016	Service Control Manager	Error
Transport driver error\r\n	Application	7017	Terminal Server	Error
Detected circular dependencies demand starting %1.\r\n	System	7017	Service Control Manager	Error
Detected circular dependencies auto-starting services.\r\n	System	7018	Service Control Manager	Error
Circular dependency: The %1 service depends on a service in a group which starts later.\r\n	System	7019	Service Control Manager	Error
Circular dependency: The %1 service depends on a group which starts later.\r\n	System	7020	Service Control Manager	Error
About to revert to the last known good configuration because the %1 service failed to start.\r\n	System	7021	Service Control Manager	Error
The specified session cannot be found.\r\n	Application	7022	Terminal Server	Error
The %1 service hung on starting.\r\n	System	7022	Service Control Manager	Error
The specified session name is already in use.\r\n	Application	7023	Terminal Server	Error
The %1 service terminated with the following error: %n%2\r\n	System	7023	Service Control Manager	Error
The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.\r\n	Application	7024	Terminal Server	Error
The %1 service terminated with service-specific error %2.\r\n	System	7024	Service Control Manager	Error
An attempt has been made to connect to a session whose video mode is not supported by the current client.\r\n	Application	7025	Terminal Server	Error
At least one service or driver failed during system startup.  Use Event Viewer to examine the event log for details.\r\n	System	7025	Service Control Manager	Error
The following boot-start or system-start driver(s) failed to load: %1\r\n	System	7026	Service Control Manager	Error
Windows 2000 could not be started as configured.  A previous working configuration was used instead.\r\n	System	7027	Service Control Manager	Error
The %1 Registry key denied access to SYSTEM account programs so the Service Control Manager took ownership of the Registry key.\r\n	System	7028	Service Control Manager	Error
Service Control Manager %0\r\n	System	7029	Service Control Manager	Information
The %1 service is marked as an interactive service.  However, the system is configured to not allow interactive services.  This service may not function properly.\r\n	System	7030	Service Control Manager	Error
The %1 service terminated unexpectedly.  It has done this %2 time(s).  The following corrective action will be taken in %3 milliseconds: %5.\r\n	System	7031	Service Control Manager	Error
The Service Control Manager tried to take a corrective action (%2) after the unexpected termination of the %3 service, but this action failed with the following error: %n%4\r\n	System	7032	Service Control Manager	Error
The Service Control Manager is not initialized successfully therefore the\r\nsystem is shutting down. Security configuration server (scesrv.dll) failed\r\nto initialize with error %1\r\n	System	7033	Service Control Manager	Error
The application attempted to enable DOS graphics mode.\r\nDOS graphics mode is not supported.\r\n	Application	7035	Terminal Server	Error
Your interactive logon privilege has been disabled.\r\nPlease contact your administrator.\r\n	Application	7037	Terminal Server	Error
The requested operation can be performed only on the system console.\r\nThis is most often the result of a driver or system DLL requiring direct console access.\r\n	Application	7038	Terminal Server	Error
The client failed to respond to the server connect message.\r\n	Application	7040	Terminal Server	Error
Disconnecting the console session is not supported.\r\n	Application	7041	Terminal Server	Error
Reconnecting a disconnected session to the console is not supported.\r\n	Application	7042	Terminal Server	Error
The request to control another session remotely was denied.\r\n	Application	7043	Terminal Server	Error
The requested session access is denied.\r\n	Application	7045	Terminal Server	Error
The specified terminal connection driver is invalid.\r\n	Application	7049	Terminal Server	Error
The requested session cannot be controlled remotely.\r\nThis may be because the session is disconnected or does not currently have a user logged on. Also, you cannot control a session remotely from the system console or control the system console remotely	Application	7050	Terminal Server	Error
The requested session is not configured to allow remote control.\r\n	Application	7051	Terminal Server	Error
Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user.\r\nPlease call your system administrator to obtain a new copy of the Terminal Server client with a valid	Application	7052	Terminal Server	Error
Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client.\r\nPlease call your system administrator for help in entering a valid, unique l	Application	7053	Terminal Server	Error
The system has reached its licensed logon limit.\r\nPlease try again later.\r\n	Application	7054	Terminal Server	Error
The client you are using is not licensed to use this system.  Your logon request is denied.\r\n	Application	7055	Terminal Server	Error
The system license has expired.  Your logon request is denied.\r\n	Application	7056	Terminal Server	Error
The %1 command is marked as an interactive command.  However, the system is\r\nconfigured to not allow interactive command execution.  This command may not\r\nfunction properly.\r\n	System	7900	Schedule	Error
The %1 command failed to start due to the following error: %n%2\r\n	System	7901	Schedule	Error
The file replication service API was called incorrectly.\r\n	File Replication Service	8001	FRS	Error
The Microsoft Client Service for NetWare redirector was unable to allocate memory.\r\n	System	8001	NWRDR	Error
The file replication service cannot be started.\r\n	File Replication Service	8002	FRS	Error
The Microsoft Client Service for NetWare redirector could not create its device.  The redirector could not be started.\r\n	System	8002	NWRDR	Error
The master browser has received a server announcement from the computer %2\r\nthat believes that it is the master browser for the domain on transport %3.\r\nThe master browser is stopping or an election is being forced.\r\n	System	8003	Browser	Error
The file replication service cannot be stopped.\r\n	File Replication Service	8003	FRS	Error
The Microsoft Client Service for NetWare redirector received an incorrectly formatted response from %2.\r\n	System	8003	NWRDR	Error
The file replication service API terminated the request.\r\nThe event log may have more information.\r\n	File Replication Service	8004	FRS	Error
A request has been submitted to promote the computer to backup when it is already a\r\nmaster browser.\r\n	System	8004	Browser	Warning
Binding to SAP Socket failed.  The Sap Agent cannot continue.\r\n	System	8004	Sap Agent	Error
The Microsoft Client Service for NetWare redirector failed to unlock part of a file on server %2.\r\n	System	8004	NWRDR	Error
The file replication service terminated the request.\r\nThe event log may have more information.\r\n	File Replication Service	8005	FRS	Error
The browser has received a server announcement indicating that the computer %2\r\nis a master browser, but this computer is not a master browser.\r\n	System	8005	Browser	Warning
The Microsoft Client Service for NetWare redirector has encountered a network error.\r\n	System	8005	NWRDR	Error
The file replication service cannot be contacted.\r\nThe event log may have more information.\r\n	File Replication Service	8006	FRS	Error
The browser has received an illegal datagram from the remote computer %2 to name %3 on transport %4.  The data is the datagram.\r\n	System	8006	Browser	Warning
An unexpected network error has occurred on the connection to %2.\r\n	System	8006	NWRDR	Error
The browser was unable to update the service status bits.  The data is the error.\r\n	System	8007	Browser	Error
The file replication service cannot satisfy the request because the user has insufficient privileges.\r\nThe event log may have more information.\r\n	File Replication Service	8007	FRS	Error
The Microsoft Client Service for NetWare redirector has timed out one or more requests to %2.\r\n	System	8007	NWRDR	Error
The browser was unable to update its role.  The data is the error.\r\n	System	8008	Browser	Error
The file replication service cannot satisfy the request because authenticated RPC is not available.\r\nThe event log may have more information.\r\n	File Replication Service	8008	FRS	Error
No NetWare or compatible server exists on this network.\r\n	System	8008	NWRDR	Error
The browser was unable to promote itself to master browser.  The computer that currently\r\nbelieves it is the master browser is %1.\r\n	System	8009	Browser	Error
The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller.\r\nThe event log may have more information.\r\n	File Replication Service	8009	FRS	Error
The browser driver was unable to convert a character string to a unicode string.\r\n	System	8010	Browser	Error
The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller.\r\nThe event log may have more information.\r\n	File Replication Service	8010	FRS	Error
The browser was unable to add the configuration parameter %1.\r\n	System	8011	Browser	Error
The file replication service cannot communicate with the file replication service on the domain controller.\r\nThe event log may have more information.\r\n	File Replication Service	8011	FRS	Error
The file replication service on the domain controller cannot communicate with the file replication service on this computer.\r\nThe event log may have more information.\r\n	File Replication Service	8012	FRS	Error
The browser driver has received an election packet from computer %2 on network %3.  The data is the packet received.\r\n	System	8012	Browser	Success
The file replication service cannot populate the system volume because of an internal error.\r\nThe event log may have more information.\r\n	File Replication Service	8013	FRS	Error
The browser driver has forced an election on network %2 because it was unable to find a master browser to retrieve a backup list on that network.\r\n	System	8013	Browser	Information
The file replication service cannot populate the system volume because of an internal timeout.\r\nThe event log may have more information.\r\n	File Replication Service	8014	FRS	Error
The browser driver has forced an election on network %2 because it was unable to find a master browser for that network.\r\n	System	8014	Browser	Information
The file replication service cannot process the request. The system volume is busy with a previous request.\r\n	File Replication Service	8015	FRS	Error
The browser has forced an election on network %1 because a Windows 2000 Server (or domain master) browser is started.\r\n	System	8015	Browser	Information
The browser driver has received too many illegal datagrams from the remote computer %2 to name %3 on transport %4.  The data is the datagram.\r\nNo more events will be generated until the reset frequency has expired.\r\n	System	8016	Browser	Error
The file replication service cannot stop replicating the system volume because of an internal error.\r\nThe event log may have more information.\r\n	File Replication Service	8016	FRS	Error
The file replication service detected an invalid parameter.\r\n	File Replication Service	8017	FRS	Error
The browser has failed to start because the dependent service %1 had invalid service status %2.\r\nStatus             Meaning\r\n  1              Service Stopped%n\r\n  2              Start Pending%n\r\n  3              Stop Pending%n\r\n  4	System	8017	Browser	Error
The browser was unable to promote itself to master browser.  The browser will continue\r\nto attempt to promote itself to the master browser, but will no longer log any events in the event log in Event Viewer.\r\n	System	8019	Browser	Error
The browser was unable to promote itself to master browser.  The computer that currently\r\nbelieves it is the master browser is unknown.\r\n	System	8020	Browser	Error
The browser was unable to retrieve a list of servers from the browser master %1 on the network %2.\r\nThe data is the error code.\r\n	System	8021	Browser	Warning
The browser was unable to retrieve a list of domains from the browser master %1 on the network %2.\r\nThe data is the error code.\r\n	System	8022	Browser	Warning
The value for the parameter %1 to the browser service was illegal.\r\n	System	8023	Browser	Warning
The backup browser server %2 is out-of-date.  Consider upgrading this computer.\r\n	System	8024	Browser	Information
The browser has retrieved a list of servers from remote computer %1 on transport %2.%n\r\nThere were %3 entries read, and %4 total entries.\r\n	System	8025	Browser	Success
The browser has retrieved a list of domains from remote computer %1 on transport %2.%n\r\nThere were %3 entries read, and %4 total entries.\r\n	System	8026	Browser	Success
The browser running on the Domain Controller has lost an election.  The computer that won the election is %2, on the transport %3.%n\r\nThe data contains the election version, election criteria, and remote computer time up, and the same information for\r\	System	8027	Browser	Information
The browser running on this computer has won a browser election on network %2.\r\nThis computer is a member of a domain, so the Domain Controller should become the master\r\nbrowser.\r\n	System	8028	Browser	Information
The browser driver was unable to initialize variables from the Registry.\r\n	System	8029	Browser	Error
The browser driver has discarded too many mailslot messages.\r\n	System	8030	Browser	Error
The browser driver has discarded too many GetBrowserServerList requests.\r\n	System	8031	Browser	Error
The browser service has failed to retrieve the backup list too many times on transport %1.\r\nThe backup browser is stopping.\r\n	System	8032	Browser	Error
The browser has forced an election on network %1 because a master browser was stopped.\r\n	System	8033	Browser	Error
The browser has received a GetBrowserServerList request when it is not the master browser.\r\n	System	8034	Browser	Error
The browser has forced an election on network %1 because the Domain Controller (or Server) has changed its role\r\n	System	8035	Browser	Error
The browser has failed to start because of an error in the DirectHostBinding parameter to the browser.\r\n	System	8036	Browser	Error
Administrator\r\n	System	8192	SAM	Information
The fax service is started.\r\n	Application	8193	Fax Service	Information
Guest	System	8193	SAM	Information
Received %1 printed to %2.\r\n	Application	8194	Fax Service	Information
The following error occurred: %3.	Application	8195	Fax Service	Error
Domain Users\r\n	System	8195	SAM	Information
Received %1 saved to %2.\r\n	Application	8196	Fax Service	Information
None	System	8196	SAM	Information
The following error occurred: %3.	Application	8197	Fax Service	Error
Administrators\r\n	System	8197	SAM	Information
Received %1 routed to local inbox: %2.\r\n	Application	8198	Fax Service	Information
Server Operators\r\n	System	8198	SAM	Information
Unable to route %1 to local inbox: %2.\r\nThe following error occurred: MAPI error.\r\n	Application	8199	Fax Service	Error
Power Users\r\n	System	8199	SAM	Information
An error occurred while installing the directory service. For more information, see the event log.\r\n	System	8200	Active Directory	Error
Users	System	8200	SAM	Information
The directory service evaluated group memberships locally.\r\n	System	8201	Active Directory	Error
Guests	System	8201	SAM	Information
%1 received.\r\nFrom: %2.\r\nCallerId: %3.\r\nTo: %4.\r\nPages: %5.\r\nTransmission time: %6.\r\nDevice Name: %7.\r\n	Application	8202	Fax Service	Information
The specified directory service attribute or value does not exist.\r\n	System	8202	Active Directory	Error
The attribute syntax specified to the directory service is invalid.\r\n	System	8203	Active Directory	Error
Print Operators\r\n	System	8203	SAM	Information
Fax Sent.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nReceiver CSID: %7.\r\nPages: %8.\r\nTransmission time: %9.\r\nDevice name: %10.\r\n	Application	8204	Fax Service	Information
The attribute type specified to the directory service is not defined.\r\n	System	8204	Active Directory	Error
Backup Operators\r\n	System	8204	SAM	Information
Send Failed. The number was busy. This fax will not be sent,\r\nas the maximum number of retries has been reached.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice nam	Application	8205	Fax Service	Error
The specified directory service attribute or value already exists.\r\n	System	8205	Active Directory	Error
Replicator\r\n	System	8205	SAM	Information
Send Failed. The number was busy. Another attempt\r\nwill be made to send this fax.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice name: %7.\r\n	Application	8206	Fax Service	Warning
The directory service is busy.\r\n	System	8206	Active Directory	Error
Domain Guests\r\n	System	8206	SAM	Information
Send Failed. There was no answer. This fax will not be sent,\r\nas the maximum number of retries has been reached.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice nam	Application	8207	Fax Service	Error
The directory service is unavailable.\r\n	System	8207	Active Directory	Error
$AccountNameConflict%1\r\n	System	8207	SAM	Information
Send Failed. There was no answer. Another attempt\r\nwill be made to send this fax.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice name: %7.\r\n	Application	8208	Fax Service	Warning
The directory service was unable to allocate a relative identifier.\r\n	System	8208	Active Directory	Error
Send Failed. The call was not answered by a fax device. This fax will not be sent, as the maximum number of retries has been reached. Sender: %1. Billing code: %2. Sender company: %3. Sender dept: %4. Recipient name: %5. Recipient number: %6. Devi	Application	8209	Fax Service	Error
Send Failed. The call was not answered by a fax device.\r\nThis fax will not be sent, as the maximum number of retries has been reached.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient num	Application	8209	Fax Service	Error
The directory service has exhausted the pool of relative identifiers.\r\n	System	8209	Active Directory	Error
Domain Computers\r\n	System	8209	SAM	Information
Send Failed. The call was not answered by a fax device.\r\nAnother attempt will be made to send this fax.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice name: %7.\r\	Application	8210	Fax Service	Warning
The requested operation could not be performed because the directory service is not the master for that type of operation.\r\n	System	8210	Active Directory	Error
Domain Controllers\r\n	System	8210	SAM	Information
Send Failed. The fax transmission was interrupted.\r\nThis fax will not be sent, as the maximum number of retries has been reached.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number:	Application	8211	Fax Service	Error
The directory service was unable to initialize the subsystem that allocates relative identifiers.\r\n	System	8211	Active Directory	Error
Schema Admins\r\n	System	8211	SAM	Information
Send Failed. The fax transmission was interrupted.\r\nAnother attempt will be made to send this fax.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice name: %7.\r\n	Application	8212	Fax Service	Error
The requested operation did not satisfy one or more constraints associated with the class of the object.\r\n	System	8212	Active Directory	Error
Cert Publishers\r\n	System	8212	SAM	Information
The fax service is stopped.\r\n	Application	8213	Fax Service	Information
The directory service can perform the requested operation only on a leaf object.\r\n	System	8213	Active Directory	Error
Enterprise Admins\r\n	System	8213	SAM	Information
Sent %1 archived to %2.\r\n	Application	8214	Fax Service	Information
The directory service cannot perform the requested operation on the RDN attribute of an object.\r\n	System	8214	Active Directory	Error
RAS and IAS Servers\r\n	System	8214	SAM	Information
Unable to archive %1 to %2.\r\nThe following error occurred: %3.\r\n	Application	8215	Fax Service	Error
The directory service detected an attempt to modify the object class of an object.\r\n	System	8215	Active Directory	Error
Group Policy Creator Owners\r\n	System	8215	SAM	Information
The requested cross-domain move operation could not be performed.\r\n	System	8216	Active Directory	Error
Pre-Windows 2000 Compatible Access\r\n	System	8216	SAM	Information
Cannot print %1 to fax printer %2.  The fax service cannot print incoming faxes to fax printers.\r\n	Application	8217	Fax Service	Error
Unable to contact the global catalog server.\r\n	System	8217	Active Directory	Error
Everyone\r\n	System	8217	SAM	Information
An error was encountered while receiving a fax.  Please wait a minute and have the sender try again.  If difficulties persist, please check that the following items are working : Phone line, Sending Fax Device and Receiving Fax device.  If problems persis	Application	8218	Fax Service	Error
The policy object is shared and can only be modified at the root.\r\n	System	8218	Active Directory	Error
Unable to receive fax. Fax receive directory %1 does not exist or is not writable.\r\n	Application	8219	Fax Service	Error
The policy object does not exist.\r\n	System	8219	Active Directory	Error
Unable to receive fax. Cannot create receive fax file %1.\r\n	Application	8220	Fax Service	Error
The requested policy information is only in the directory service.\r\n	System	8220	Active Directory	Error
The spooler service cannot process requests from the fax service.\r\n	Application	8221	Fax Service	Error
A domain controller promotion is currently active.\r\n	System	8221	Active Directory	Error
No fax devices were found.\r\n	Application	8222	Fax Service	Error
A domain controller promotion is not currently active\r\n	System	8222	Active Directory	Error
An operations error occurred.\r\n	System	8224	Active Directory	Error
An error was encountered while sending a fax.  Please wait a minute and then try to send the fax again.  If difficulties persist, please check that the following items are working : Phone line, Sending Fax Device and Receiving Fax device.  If problems per	Application	8225	Fax Service	Error
A protocol error occurred.\r\n	System	8225	Active Directory	Error
An error was encountered while sending a fax.  Please wait a minute and then try to send the fax again.  If difficulties persist, please check that the following items are working : Phone line, Sending Fax Device and Receiving Fax device.  If problems per	Application	8226	Fax Service	Warning
The time limit for this request was exceeded.\r\n	System	8226	Active Directory	Error
Send Cancelled.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice name: %7.\r\n	Application	8227	Fax Service	Warning
The size limit for this request was exceeded.\r\n	System	8227	Active Directory	Error
Receive Cancelled.\r\n	Application	8228	Fax Service	Warning
The administrative limit for this request was exceeded.\r\n	System	8228	Active Directory	Error
Send Failed. There was no dial tone. This fax will not be sent,\r\nas the maximum number of retries has been reached.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice	Application	8229	Fax Service	Error
The compare response was false.\r\n	System	8229	Active Directory	Error
Send Failed. There was no dial tone. Another attempt\r\nwill be made to send this fax.\r\nSender: %1.\r\nBilling code: %2.\r\nSender company: %3.\r\nSender dept: %4.\r\nRecipient name: %5.\r\nRecipient number: %6.\r\nDevice name: %7.\r\n	Application	8230	Fax Service	Warning
The compare response was true.\r\n	System	8230	Active Directory	Error
You have violated the license agreement for the Small Business Server by installing Fax Server on a computer not running the Small Business Server\r\n	Application	8231	Fax Service	Error
The requested authentication method is not supported by the server.\r\n	System	8231	Active Directory	Error
Receive failed due to a transmission error.  \r\nThe Fax Service was able to recover a portion of the received fax.\r\nFile Name: %1.\r\nFrom: %2.\r\nCallerId: %3.\r\nTo: %4.\r\nRecovered Pages: %5.\r\nTotal Pages: %6.\r\nTransmission time: %7.\r\nDevice	Application	8232	Fax Service	Error
A more secure authentication method is required for this server.\r\n	System	8232	Active Directory	Error
The Fax Service had problems restoring the fax queue.\r\n\r\nIf you are unsure if a fax job was transmitted, you should retransmit\r\nthat job.\r\n	Application	8233	Fax Service	Error
Inappropriate authentication.\r\n	System	8233	Active Directory	Error
The Fax Service had problems initializing the routing module "%1" .\r\n\r\nLocation:%2.\r\n\r\nPlease contact your system administrator.\r\n	Application	8234	Fax Service	Error
The authentication mechanism is unknown.\r\n	System	8234	Active Directory	Error
The Fax Service had problems initializing the virtual devices for %1.\r\n\r\nPlease contact your system administrator.\r\n	Application	8235	Fax Service	Error
A referral was returned from the server.\r\n	System	8235	Active Directory	Error
The Fax Service had problems initializing the fax service provider module "%1".\r\n\r\nLocation: %2.\r\n\r\nPlease contact your system administrator.\r\n	Application	8236	Fax Service	Error
The server does not support the requested critical extension.\r\n	System	8236	Active Directory	Error
This request requires a secure connection.\r\n	System	8237	Active Directory	Error
Inappropriate matching.\r\n	System	8238	Active Directory	Error
A constraint violation occurred.\r\n	System	8239	Active Directory	Error
There is no such object on the server.\r\n	System	8240	Active Directory	Error
There is an alias problem.\r\n	System	8241	Active Directory	Error
An invalid dn syntax has been specified.\r\n	System	8242	Active Directory	Error
The object is a leaf object.\r\n	System	8243	Active Directory	Error
There is an alias dereferencing problem.\r\n	System	8244	Active Directory	Error
The server is unwilling to process the request.\r\n	System	8245	Active Directory	Error
A loop has been detected.\r\n	System	8246	Active Directory	Error
There is a naming violation.\r\n	System	8247	Active Directory	Error
The result set is too large.\r\n	System	8248	Active Directory	Error
The operation affects multiple DSAs\r\n	System	8249	Active Directory	Error
The server is not operational.\r\n	System	8250	Active Directory	Error
A local error has occurred.\r\n	System	8251	Active Directory	Error
An encoding error has occurred.\r\n	System	8252	Active Directory	Error
A decoding error has occurred.\r\n	System	8253	Active Directory	Error
The search filter cannot be recognized.\r\n	System	8254	Active Directory	Error
One or more parameters are illegal.\r\n	System	8255	Active Directory	Error
The specified method is not supported.\r\n	System	8256	Active Directory	Error
No results were returned.\r\n	System	8257	Active Directory	Error
The specified control is not supported by the server.\r\n	System	8258	Active Directory	Error
A referral loop was detected by the client.\r\n	System	8259	Active Directory	Error
The preset referral limit was exceeded.\r\n	System	8260	Active Directory	Error
The root object must be the head of a naming context. The root object cannot have an instantiated parent.\r\n	System	8301	Active Directory	Error
The add replica operation cannot be performed. The naming context must be writable in order to create the replica.\r\n	System	8302	Active Directory	Error
A reference to an attribute that is not defined in the schema occurred.\r\n	System	8303	Active Directory	Error
The maximum size of an object has been exceeded.\r\n	System	8304	Active Directory	Error
An attempt was made to add an object to the directory with a name that is already in use.\r\n	System	8305	Active Directory	Error
An attempt was made to add an object of a class that does not have an RDN defined in the schema.\r\n	System	8306	Active Directory	Error
An attempt was made to add an object using an RDN that is not the RDN defined in the schema.\r\n	System	8307	Active Directory	Error
None of the requested attributes were found on the objects.\r\n	System	8308	Active Directory	Error
The user buffer is too small.\r\n	System	8309	Active Directory	Error
The attribute specified in the operation is not present on the object.\r\n	System	8310	Active Directory	Error
Illegal modify operation. Some aspect of the modification is not permitted.\r\n	System	8311	Active Directory	Error
The specified object is too large.\r\n	System	8312	Active Directory	Error
The specified instance type is not valid.\r\n	System	8313	Active Directory	Error
The operation must be performed at a master DSA.\r\n	System	8314	Active Directory	Error
The object class attribute must be specified.\r\n	System	8315	Active Directory	Error
A required attribute is missing.\r\n	System	8316	Active Directory	Error
An attempt was made to modify an object to include an attribute that is not legal for its class.\r\n	System	8317	Active Directory	Error
The specified attribute is already present on the object.\r\n	System	8318	Active Directory	Error
The specified attribute is not present, or has no values.\r\n	System	8320	Active Directory	Error
An attribute's single value constraint has been violated.\r\n	System	8321	Active Directory	Error
An attribute's range constraint has been violated.\r\n	System	8322	Active Directory	Error
The specified value already exists.\r\n	System	8323	Active Directory	Error
The attribute cannot be removed because it is not present on the object.\r\n	System	8324	Active Directory	Error
The attribute value cannot be removed because it is not present on the object.\r\n	System	8325	Active Directory	Error
The specified root object cannot be a subref.\r\n	System	8326	Active Directory	Error
Chaining is not permitted.\r\n	System	8327	Active Directory	Error
Chained evaluation is not permitted.\r\n	System	8328	Active Directory	Error
The operation could not be performed because the object's parent is either uninstantiated or deleted.\r\n	System	8329	Active Directory	Error
Having a parent that is an alias is not permitted. Aliases are leaf objects.\r\n	System	8330	Active Directory	Error
The object and parent must be of the same type, either both masters or\r\nboth replicas.\r\n	System	8331	Active Directory	Error
The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.\r\n	System	8332	Active Directory	Error
Directory object not found.\r\n	System	8333	Active Directory	Error
The aliased object is missing.\r\n	System	8334	Active Directory	Error
The object name has bad syntax.\r\n	System	8335	Active Directory	Error
It is not permitted for an alias to refer to another alias.\r\n	System	8336	Active Directory	Error
The alias cannot be dereferenced.\r\n	System	8337	Active Directory	Error
The operation is out of scope.\r\n	System	8338	Active Directory	Error
The DSA object cannot be deleted.\r\n	System	8340	Active Directory	Error
A directory service error has occurred.\r\n	System	8341	Active Directory	Error
The operation can only be performed on an internal master DSA object.\r\n	System	8342	Active Directory	Error
The object must be of class DSA.\r\n	System	8343	Active Directory	Error
Insufficient access rights to perform the operation.\r\n	System	8344	Active Directory	Error
The object cannot be added because the parent is not on the list of possible superiors.\r\n	System	8345	Active Directory	Error
Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM).\r\n	System	8346	Active Directory	Error
The name has too many parts.\r\n	System	8347	Active Directory	Error
The name is too long.\r\n	System	8348	Active Directory	Error
The name value is too long.\r\n	System	8349	Active Directory	Error
The directory service encountered an error parsing a name.\r\n	System	8350	Active Directory	Error
The directory service cannot get the attribute type for a name.\r\n	System	8351	Active Directory	Error
The name does not identify an object; the name identifies a phantom.\r\n	System	8352	Active Directory	Error
The security descriptor is too short.\r\n	System	8353	Active Directory	Error
The security descriptor is invalid.\r\n	System	8354	Active Directory	Error
Failed to create name for deleted object.\r\n	System	8355	Active Directory	Error
The parent of a new subref must exist.\r\n	System	8356	Active Directory	Error
The object must be a naming context.\r\n	System	8357	Active Directory	Error
It is not permitted to add an attribute which is owned by the system.\r\n	System	8358	Active Directory	Error
The class of the object must be structural; you cannot instantiate an abstract class.\r\n	System	8359	Active Directory	Error
The schema object could not be found.\r\n	System	8360	Active Directory	Error
A local object with this GUID (dead or alive) already exists.\r\n	System	8361	Active Directory	Error
The operation cannot be performed on a back link.\r\n	System	8362	Active Directory	Error
The cross reference for the specified naming context could not be found.\r\n	System	8363	Active Directory	Error
The operation could not be performed because the directory service is shutting down.\r\n	System	8364	Active Directory	Error
The directory service request is invalid.\r\n	System	8365	Active Directory	Error
The role owner attribute could not be read.\r\n	System	8366	Active Directory	Error
The requested FSMO operation failed. The current FSMO holder could not be contacted.\r\n	System	8367	Active Directory	Error
Modification of a DN across a naming context is not permitted.\r\n	System	8368	Active Directory	Error
The attribute cannot be modified because it is owned by the system.\r\n	System	8369	Active Directory	Error
Only the replicator can perform this function.\r\n	System	8370	Active Directory	Error
The specified class is not defined.\r\n	System	8371	Active Directory	Error
The specified class is not a subclass.\r\n	System	8372	Active Directory	Error
The name reference is invalid.\r\n	System	8373	Active Directory	Error
A cross reference already exists.\r\n	System	8374	Active Directory	Error
It is not permitted to delete a master cross reference.\r\n	System	8375	Active Directory	Error
Subtree notifications are only supported on NC heads.\r\n	System	8376	Active Directory	Error
Notification filter is too complex.\r\n	System	8377	Active Directory	Error
Schema update failed: duplicate RDN.\r\n	System	8378	Active Directory	Error
Schema update failed: duplicate OID.\r\n	System	8379	Active Directory	Error
Schema update failed: duplicate MAPI identifier.\r\n	System	8380	Active Directory	Error
Schema update failed: duplicate schema-id GUID.\r\n	System	8381	Active Directory	Error
Schema update failed: duplicate LDAP display name.\r\n	System	8382	Active Directory	Error
Schema update failed: range-lower less than range upper.\r\n	System	8383	Active Directory	Error
Schema update failed: syntax mismatch.\r\n	System	8384	Active Directory	Error
Schema deletion failed: attribute is used in must-contain.\r\n	System	8385	Active Directory	Error
Schema deletion failed: attribute is used in may-contain.\r\n	System	8386	Active Directory	Error
Schema update failed: attribute in may-contain does not exist.\r\n	System	8387	Active Directory	Error
Schema update failed: attribute in must-contain does not exist.\r\n	System	8388	Active Directory	Error
Schema update failed: class in aux-class list does not exist or is not an auxiliary class.\r\n	System	8389	Active Directory	Error
Schema update failed: class in poss-superiors does not exist.\r\n	System	8390	Active Directory	Error
Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules.\r\n	System	8391	Active Directory	Error
Schema update failed: Rdn-Att-Id has wrong syntax.\r\n	System	8392	Active Directory	Error
Schema deletion failed: class is used as auxiliary class.\r\n	System	8393	Active Directory	Error
Schema deletion failed: class is used as sub class.\r\n	System	8394	Active Directory	Error
Schema deletion failed: class is used as poss superior.\r\n	System	8395	Active Directory	Error
Schema update failed in recalculating validation cache.\r\n	System	8396	Active Directory	Error
The tree deletion is not finished.  The request must be made again to continue deleting the tree.\r\n	System	8397	Active Directory	Error
The requested delete operation could not be performed.\r\n	System	8398	Active Directory	Error
Cannot read the governs class identifier for the schema record.\r\n	System	8399	Active Directory	Error
The attribute schema has bad syntax.\r\n	System	8400	Active Directory	Error
The attribute could not be cached.\r\n	System	8401	Active Directory	Error
The class could not be cached.\r\n	System	8402	Active Directory	Error
The attribute could not be removed from the cache.\r\n	System	8403	Active Directory	Error
The class could not be removed from the cache.\r\n	System	8404	Active Directory	Error
The distinguished name attribute could not be read.\r\n	System	8405	Active Directory	Error
A required subref is missing.\r\n	System	8406	Active Directory	Error
The instance type attribute could not be retrieved.\r\n	System	8407	Active Directory	Error
An internal error has occurred.\r\n	System	8408	Active Directory	Error
A database error has occurred.\r\n	System	8409	Active Directory	Error
The attribute GOVERNSID is missing.\r\n	System	8410	Active Directory	Error
An expected attribute is missing.\r\n	System	8411	Active Directory	Error
The specified naming context is missing a cross reference.\r\n	System	8412	Active Directory	Error
A security checking error has occurred.\r\n	System	8413	Active Directory	Error
The schema is not loaded.\r\n	System	8414	Active Directory	Error
Schema allocation failed. Please check if the machine is running low on memory.\r\n	System	8415	Active Directory	Error
Failed to obtain the required syntax for the attribute schema.\r\n	System	8416	Active Directory	Error
The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.\r\n	System	8417	Active Directory	Error
The replication operation failed because of a schema mismatch between the servers involved.\r\n	System	8418	Active Directory	Error
The DSA object could not be found.\r\n	System	8419	Active Directory	Error
The naming context could not be found.\r\n	System	8420	Active Directory	Error
The naming context could not be found in the cache.\r\n	System	8421	Active Directory	Error
The child object could not be retrieved.\r\n	System	8422	Active Directory	Error
The modification was not permitted for security reasons.\r\n	System	8423	Active Directory	Error
The operation cannot replace the hidden record.\r\n	System	8424	Active Directory	Error
The hierarchy file is invalid.\r\n	System	8425	Active Directory	Error
The attempt to build the hierarchy table failed.\r\n	System	8426	Active Directory	Error
The directory configuration parameter is missing from the registry.\r\n	System	8427	Active Directory	Error
The attempt to count the address book indices failed.\r\n	System	8428	Active Directory	Error
The allocation of the hierarchy table failed.\r\n	System	8429	Active Directory	Error
The directory service encountered an internal failure.\r\n	System	8430	Active Directory	Error
The directory service encountered an unknown failure.\r\n	System	8431	Active Directory	Error
A root object requires a class of 'top'.\r\n	System	8432	Active Directory	Error
This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.\r\n	System	8433	Active Directory	Error
The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.\r\n	System	8434	Active Directory	Error
The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.\r\n	System	8435	Active Directory	Error
The replication operation failed.\r\n	System	8436	Active Directory	Error
An invalid parameter was specified for this replication operation.\r\n	System	8437	Active Directory	Error
The directory service is too busy to complete the replication operation at this time.\r\n	System	8438	Active Directory	Error
The distinguished name specified for this replication operation is invalid.\r\n	System	8439	Active Directory	Error
The naming context specified for this replication operation is invalid.\r\n	System	8440	Active Directory	Error
The distinguished name specified for this replication operation already exists.\r\n	System	8441	Active Directory	Error
The replication system encountered an internal error.\r\n	System	8442	Active Directory	Error
The replication operation encountered a database inconsistency.\r\n	System	8443	Active Directory	Error
The server specified for this replication operation could not be contacted.\r\n	System	8444	Active Directory	Error
The replication operation encountered an object with an invalid instance type.\r\n	System	8445	Active Directory	Error
The replication operation failed to allocate memory.\r\n	System	8446	Active Directory	Error
The replication operation encountered an error with the mail system.\r\n	System	8447	Active Directory	Error
The replication reference information for the target server already exists.\r\n	System	8448	Active Directory	Error
Built-in account for administering the computer/domain\r\n	System	8448	SAM	Information
The replication reference information for the target server does not exist.\r\n	System	8449	Active Directory	Error
Built-in account for guest access to the computer/domain\r\n	System	8449	SAM	Information
The naming context cannot be removed because it is replicated to another server.\r\n	System	8450	Active Directory	Error
Designated administrators of the domain\r\n	System	8450	SAM	Information
The replication operation encountered a database error.\r\n	System	8451	Active Directory	Error
All domain users\r\n	System	8451	SAM	Information
The naming context is in the process of being removed or is not replicated from the specified server.\r\n	System	8452	Active Directory	Error
Ordinary users\r\n	System	8452	SAM	Information
Replication access was denied.\r\n	System	8453	Active Directory	Error
Administrators have complete and unrestricted access to the computer/domain\r\n	System	8453	SAM	Information
The requested operation is not supported by this version of the directory service.\r\n	System	8454	Active Directory	Error
Members can administer domain servers\r\n	System	8454	SAM	Information
The replication remote procedure call was cancelled.\r\n	System	8455	Active Directory	Error
Power Users can modify the computer and install programs, but cannot read files that belong to other users\r\n	System	8455	SAM	Information
The source server is currently rejecting replication requests.\r\n	System	8456	Active Directory	Error
Users can operate the computer and save documents, but cannot install programs or make potentially damaging changes to the system files and settings\r\n	System	8456	SAM	Information
The destination server is currently rejecting replication requests.\r\n	System	8457	Active Directory	Error
Guests can operate the computer and save documents, but cannot install programs or make potentially damaging changes to the system files and settings\r\n	System	8457	SAM	Information
The replication operation failed due to a collision of object names.\r\n	System	8458	Active Directory	Error
Members can administer domain user and group accounts\r\n	System	8458	SAM	Information
The replication source has been reinstalled.\r\n	System	8459	Active Directory	Error
Members can administer domain printers\r\n	System	8459	SAM	Information
The replication operation failed because a required parent object is missing.\r\n	System	8460	Active Directory	Error
Backup Operators can only use a backup program to backup files and folders on to the computer\r\n	System	8460	SAM	Information
The replication operation was preempted.\r\n	System	8461	Active Directory	Error
Supports file replication in a domain\r\n	System	8461	SAM	Information
The replication synchronization attempt was abandoned because of a lack of updates.\r\n	System	8462	Active Directory	Error
All domain guests\r\n	System	8462	SAM	Information
The replication operation was terminated because the system is shutting down.\r\n	System	8463	Active Directory	Error
Key Distribution Center Service Account\r\n	System	8463	SAM	Information
The replication synchronization attempt failed as the destination partial attribute set is not a subset of source partial attribute set.\r\n	System	8464	Active Directory	Error
All workstations and servers joined to the domain\r\n	System	8464	SAM	Information
The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.\r\n	System	8465	Active Directory	Error
All domain controllers in the domain\r\n	System	8465	SAM	Information
The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.\r\n	System	8466	Active Directory	Error
Designated administrators of the schema\r\n	System	8466	SAM	Information
A schema mismatch is detected between the source and the build used during a replica install. The replica cannot be installed.\r\n	System	8467	Active Directory	Error
Enterprise certification and renewal agents\r\n	System	8467	SAM	Information
Schema update failed: An attribute with the same link identifier already exists.\r\n	System	8468	Active Directory	Error
Designated administrators of the enterprise\r\n	System	8468	SAM	Information
Name translation: Generic processing error.\r\n	System	8469	Active Directory	Error
Servers in this group can access remote access properties of users\r\n	System	8469	SAM	Information
Name translation: Could not find the name or insufficient right to see name.\r\n	System	8470	Active Directory	Error
Members in this group can modify group policy for the domain\r\n	System	8470	SAM	Information
Name translation: Input name mapped to more than one output name.\r\n	System	8471	Active Directory	Error
A backward compatibility group which allows read access on all users and groups in the domain\r\n	System	8471	SAM	Information
Name translation: Input name found, but not the associated output format.\r\n	System	8472	Active Directory	Error
Name translation: Unable to resolve completely, only the domain was found.\r\n	System	8473	Active Directory	Error
Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.\r\n	System	8474	Active Directory	Error
Modification of a constructed att is not allowed.\r\n	System	8475	Active Directory	Error
The OM-Object-Class specified is incorrect for an attribute with the specified syntax.\r\n	System	8476	Active Directory	Error
The replication request has been posted; waiting for reply.\r\n	System	8477	Active Directory	Error
The requested operation requires a directory service, and none was available.\r\n	System	8478	Active Directory	Error
The LDAP display name of the class or attribute contains non-ASCII characters.\r\n	System	8479	Active Directory	Error
The requested search operation is only supported for base searches.\r\n	System	8480	Active Directory	Error
The search failed to retrieve attributes from the database.\r\n	System	8481	Active Directory	Error
The schema update operation tried to add a backward link attribute that has no corresponding forward link.\r\n	System	8482	Active Directory	Error
Source and destination of a cross-domain move do not agree on the object's epoch number.  Either source or destination does not have the latest version of the object.\r\n	System	8483	Active Directory	Error
Source and destination of a cross-domain move do not agree on the object's current name.  Either source or destination does not have the latest version of the object.\r\n	System	8484	Active Directory	Error
Source and destination for the cross-domain move operation are identical.  Caller should use local move operation instead of cross-domain move operation.\r\n	System	8485	Active Directory	Error
Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest.  Either source or destination does not have the latest version of the Partitions container.\r\n	System	8486	Active Directory	Error
Destination of a cross-domain move is not authoritative for the destination naming context.\r\n	System	8487	Active Directory	Error
Source and destination of a cross-domain move do not agree on the identity of the source object.  Either source or destination does not have the latest version of the source object.\r\n	System	8488	Active Directory	Error
Object being moved across-domains is already known to be deleted by the destination server.  The source server does not have the latest version of the source object.\r\n	System	8489	Active Directory	Error
Another operation which requires exclusive access to the PDC FSMO is already in progress.\r\n	System	8490	Active Directory	Error
A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains.  The destination object needs to be removed to restore the system to a consistent state.\r\n	System	8491	Active Directory	Error
This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, eg: trust account or restricted RID, which prevent its move.\r\n	System	8492	Active Directory	Error
Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group.  Remove the object from any account group memberships and retry.\r\n	System	8493	Active Directory	Error
A naming context head must be the immediate child of another naming context head, not of an interior node.\r\n	System	8494	Active Directory	Error
The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context.  Please ensure that the domain naming master role is held by a server that is configured as a global	System	8495	Active Directory	Error
Destination domain must be in native mode.\r\n	System	8496	Active Directory	Error
The operation can not be performed because the server does not have an infrastructure container in the domain of interest.\r\n	System	8497	Active Directory	Error
Cross-domain move of account groups is not allowed.\r\n	System	8498	Active Directory	Error
Cross-domain move of resource groups is not allowed.\r\n	System	8499	Active Directory	Error
The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.\r\n	System	8500	Active Directory	Error
The Registry Key %1 was not present.  The Sap Agent could not start.\r\n	System	8500	Sap Agent	Error
Tree deletions starting at an object which has an NC head as a descendant are not allowed.\r\n	System	8501	Active Directory	Error
Winsock startup routine failed.  The Sap Agent cannot continue.\r\n	System	8501	Sap Agent	Error
The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.\r\n	System	8502	Active Directory	Error
Socket create call failed for main socket. The Sap Agent cannot continue.\r\n	System	8502	Sap Agent	Error
The directory service failed to identify the list of objects to delete while attempting a tree deletion.\r\n	System	8503	Active Directory	Error
Setting broadcast option on socket failed.  The Sap Agent cannot continue.\r\n	System	8503	Sap Agent	Error
Security Accounts Manager initialization failed because of the following error: %1.\r\nError Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information.\r\n	System	8504	Active Directory	Error
Only an administrator can modify the membership list of an administrative group.\r\n	System	8505	Active Directory	Error
Getting bound address of socket failed.  The Sap Agent cannot continue.\r\n	System	8505	Sap Agent	Error
Cannot change the primary group ID of a domain controller account.\r\n	System	8506	Active Directory	Error
Setting option EXTENDED_ADDRESS failed.  The Sap Agent cannot continue.\r\n	System	8506	Sap Agent	Error
An attempt is made to modify the base schema.\r\n	System	8507	Active Directory	Error
Setting NWLink option BCASTINTADDR failed.  The Sap Agent cannot continue.\r\n	System	8507	Sap Agent	Error
An attempt was made to add a new Must-Contain attribute or delete an existing Must-Contain/May-Contain/Poss-Superiors attribute from an existing class (directly or through inheritance, for example, by adding or deleting an auxiliary class).\r\n	System	8508	Active Directory	Error
Error allocating memory to hold a card structure.  The Sap Agent cannot continue.\r\n	System	8508	Sap Agent	Error
Schema update is not allowed on this DC. Either the registry key is not set or the DC is not the schema FSMO Role Owner.\r\n	System	8509	Active Directory	Error
Enumeration of cards returned 0 cards.\r\n	System	8509	Sap Agent	Information
An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.\r\n	System	8510	Active Directory	Error
Error creating thread counting event.  The Sap Agent cannot continue.\r\n	System	8510	Sap Agent	Error
The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.\r\n	System	8511	Active Directory	Error
Error creating receive semaphore.  The Sap Agent cannot continue.\r\n	System	8511	Sap Agent	Error
The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.\r\n	System	8512	Active Directory	Error
Error creating send event.  The Sap Agent cannot continue.\r\n	System	8512	Sap Agent	Error
The specified group type is invalid.\r\n	System	8513	Active Directory	Error
Error starting receive thread.  The Sap Agent cannot continue.\r\n	System	8513	Sap Agent	Error
You cannot nest global groups in a mixed domain if the group is security-enabled.\r\n	System	8514	Active Directory	Error
Error starting worker thread.  The Sap Agent cannot continue.\r\n	System	8514	Sap Agent	Error
You cannot nest local groups in a mixed domain if the group is security-enabled.\r\n	System	8515	Active Directory	Error
Error allocating database array.  The Sap Agent cannot continue.\r\n	System	8515	Sap Agent	Error
A global group cannot have a local group as a member.\r\n	System	8516	Active Directory	Error
Error allocating hash table.  The Sap Agent cannot continue.\r\n	System	8516	Sap Agent	Error
A global group cannot have a universal group as a member.\r\n	System	8517	Active Directory	Error
Error starting LPC worker thread.  The Sap Agent cannot continue.\r\n	System	8517	Sap Agent	Error
A universal group cannot have a local group as a member.\r\n	System	8518	Active Directory	Error
Error creating the LPC port.  The Sap Agent cannot continue.\r\n	System	8518	Sap Agent	Error
A global group cannot have a cross-domain member.\r\n	System	8519	Active Directory	Error
Error creating the LPC thread event.  The Sap Agent cannot continue.\r\n	System	8519	Sap Agent	Error
A local group cannot have another cross domain local group as a member.\r\n	System	8520	Active Directory	Error
Error allocating memory for an LPC Client structure.  The Sap Agent cannot continue.\r\n	System	8520	Sap Agent	Error
A group with primary members cannot change to a security-disabled group.\r\n	System	8521	Active Directory	Error
Error allocating buffer to hold LPC worker thread handles.  The Sap Agent cannot continue.\r\n	System	8521	Sap Agent	Error
The schema cache load failed to convert the string default SD on a class-schema object.\r\n	System	8522	Active Directory	Error
The value for WANFilter in the registry must be 0-2.  The Sap Agent cannot continue.\r\n	System	8522	Sap Agent	Error
Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role.\r\n	System	8523	Active Directory	Error
Error creating event for card list access synchronization.  The Sap Agent cannot continue.\r\n	System	8523	Sap Agent	Error
The DSA operation is unable to proceed because of a DNS lookup failure.\r\n	System	8524	Active Directory	Error
Error creating event for database access synchronization.  The Sap Agent cannot continue.\r\n	System	8524	Sap Agent	Error
Name too long in key %1: Name = %s.  The Sap Agent cannot continue.\r\n	System	8525	Sap Agent	Warning
While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.\r\n	System	8525	Active Directory	Error
The Security Descriptor attribute could not be read.\r\n	System	8526	Active Directory	Error
Error creating WAN control semaphore.  The Sap Agent cannot continue.\r\n	System	8526	Sap Agent	Error
The object requested was not found, but an object with that key was found.\r\n	System	8527	Active Directory	Error
Socket create call failed for WAN socket.  The Sap Agent cannot continue.\r\n	System	8527	Sap Agent	Error
The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1\r\n	System	8528	Active Directory	Error
Binding to WAN socket failed.  The Sap Agent cannot continue.\r\n	System	8528	Sap Agent	Error
Security Account Manager needs to get the boot password.\r\n	System	8529	Active Directory	Error
Error starting WAN worker thread.  The Sap Agent cannot continue.\r\n	System	8529	Sap Agent	Error
Security Account Manager needs to get the boot key from floppy disk.\r\n	System	8530	Active Directory	Error
Error starting WAN check thread.  The Sap Agent cannot continue.\r\n	System	8530	Sap Agent	Error
Directory Service cannot start.\r\n	System	8531	Active Directory	Error
Error on getsockopt IPX_MAX_ADAPTER_NUM.  Data is the error code.  The Sap Agent cannot continue.\r\n	System	8531	Sap Agent	Error
Directory Services could not start.\r\n	System	8532	Active Directory	Error
Error allocating buffer to hold WAN notify thread handles.  The Sap Agent cannot continue.\r\n	System	8532	Sap Agent	Error
The connection between client and server requires packet privacy or better.\r\n	System	8533	Active Directory	Error
Error creating the WAN thread event.  The Sap Agent cannot continue.\r\n	System	8533	Sap Agent	Error
The source domain may not be in the same forest as destination.\r\n	System	8534	Active Directory	Error
The destination domain must be in the forest.\r\n	System	8535	Active Directory	Error
The operation requires that destination domain auditing be enabled.\r\n	System	8536	Active Directory	Error
The operation couldn't locate a DC for the source domain.\r\n	System	8537	Active Directory	Error
The source object must be a group or user.\r\n	System	8538	Active Directory	Error
The source object's SID already exists in destination forest.\r\n	System	8539	Active Directory	Error
The source and destination object must be of the same type.\r\n	System	8540	Active Directory	Error
Security Accounts Manager initialization failed because of the following error: %1.\r\nError Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information.\r\n	System	8541	Active Directory	Error
Schema information could not be included in the replication request.\r\n	System	8542	Active Directory	Error
The replication operation could not be completed due to a schema\r\nincompatibility.\r\n	System	8543	Active Directory	Error
The replication operation could not be completed due to a previous schema incompatibility.\r\n	System	8544	Active Directory	Error
The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.\r\n	System	8545	Active Directory	Error
The requested domain could not be deleted because there exist domain controllers that still host this domain.\r\n	System	8546	Active Directory	Error
The requested operation can be performed only on a global catalog server.\r\n	System	8547	Active Directory	Error
A local group can only be a member of other local groups in the same domain.\r\n	System	8548	Active Directory	Error
Foreign security principals cannot be members of universal groups.\r\n	System	8549	Active Directory	Error
The attribute is not allowed to be replicated to the GC because of security reasons.\r\n	System	8550	Active Directory	Error
The checkpoint with the PDC could not be taken because there too many modifications being processed currently.\r\n	System	8551	Active Directory	Error
The operation requires that source domain auditing be enabled.\r\n	System	8552	Active Directory	Error
Security principal objects can only be created inside domain naming contexts.\r\n	System	8553	Active Directory	Error
A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format.\r\n	System	8554	Active Directory	Error
A Filter was passed that uses constructed attributes.\r\n	System	8555	Active Directory	Error
The unicodePwd attribute value must be enclosed in double quotes.\r\n	System	8556	Active Directory	Error
Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.	System	8557	Active Directory	Error
For security reasons, the operation must be run on the destination DC.	System	8558	Active Directory	Error
For security reasons, the source DC	System	8559	Active Directory	Error
Critical Directory Service System objects cannot be deleted during tree delete operations.  The tree delete may have been partially performed.	System	8560	Active Directory	Error
%2 could not allocate a resource of type %3 due to system resource problems.\r\n	System	9001	Transport	Warning
DNS server unable to interpret format.\r\n	DNS Server	9001	DNS	Error
The Microsoft Client Service for NetWare could not start because it did not bind to any transports.\r\n	System	9001	NetWare Workstation	Error
%2 could not allocate a resource of type %3 due to its configured size of %4.\r\n	System	9002	Transport	Error
DNS server failure.\r\n	DNS Server	9002	DNS	Error
The Microsoft Client Service for NetWare could not bind to the transport %1.\r\n	System	9002	NetWare Workstation	Error
%2 could not allocate a resource of type %3 due to a specifically configured limit of %4.\r\n	System	9003	Transport	Error
DNS name does not exist.\r\n	DNS Server	9003	DNS	Error
The value named %1 in the Microsoft Client Service for NetWare registry key %2 was invalid.  The value was\r\nignored, and processing continued.\r\n	System	9003	NetWare Workstation	Warning
DNS request not supported by name server.\r\n	DNS Server	9004	DNS	Error
%2 failed to register itself with the NDIS wrapper.\r\n	System	9004	Transport	Error
The Microsoft Client Service for NetWare redirector (%1) could not be started.\r\n	System	9004	NetWare Workstation	Error
DNS operation refused.\r\n	DNS Server	9005	DNS	Error
%2 failed to bind to adapter %3.\r\n	System	9005	Transport	Error
The Gateway Account could not be logged on. The error %1 occurred.\r\n	System	9005	NetWare Workstation	Error
DNS name that ought not exist, does exist.\r\n	DNS Server	9006	DNS	Error
%2 could not find adapter %3.\r\n	System	9006	Transport	Error
Device %1 could not be reconnected to %2. Error %3 occurred.\r\n	System	9006	NetWare Workstation	Error
DNS RR set that ought not exist, does exist.\r\n	DNS Server	9007	DNS	Error
%2 failed while setting OID %3 on adapter %4.\r\n	System	9007	Transport	Error
The version of the NWLINK transport present does not support all the capabilities required to use the Microsoft Client Service for NetWare properly.\r\n	System	9007	NetWare Workstation	Error
DNS RR set that ought to exist, does not exist.\r\n	DNS Server	9008	DNS	Error
%2 failed while querying OID %3 on adapter %4.\r\n	System	9008	Transport	Error
DNS server not authoritative for zone.\r\n	DNS Server	9009	DNS	Error
%2 could not transfer a packet from the adapter.  The packet was dropped.\r\n	System	9009	Transport	Information
DNS name in update or prereq is not in zone.\r\n	DNS Server	9010	DNS	Error
%2 could not create a link to a remote computer.  Your computer has exceeded the number of connections it can make to that remote computer.\r\n	System	9010	Transport	Information
%2 received an unexpected %3 packet from a remote computer.\r\n	System	9011	Transport	Information
DNS signature failed to verify.\r\n	DNS Server	9016	DNS	Error
DNS bad key.\r\n	DNS Server	9017	DNS	Error
DNS signature validity expired.\r\n	DNS Server	9018	DNS	Error
No records found for given DNS query.\r\n	DNS Server	9501	DNS	Error
The default frame type for auto-detection on %2 was changed to %3.\r\nThis type is now the default if no frame type can be detected.\r\n	System	9501	IPX/SPX	Information
Bad DNS packet.\r\n	DNS Server	9502	DNS	Error
A SAP announcement was sent over %2 which is configured for multiple\r\nnetworks, but no internal network is configured. This may prevent\r\nmachines on some networks from locating the advertised service.\r\n	System	9503	IPX/SPX	Warning
No DNS packet.\r\n	DNS Server	9503	DNS	Error
The value for the %2 parameter %3 was illegal.\r\n	System	9504	IPX/SPX	Warning
DNS error, check rcode.\r\n	DNS Server	9504	DNS	Error
%2 was configured with an internal network number of %3. This network\r\nnumber conflicts with one of the attached networks. The configured\r\ninternal network number will be ignored.\r\n	System	9504	IPX/SPX	Error
Unsecured DNS packet.\r\n	DNS Server	9505	DNS	Error
%2 had no frame types configured for the binding to adapter %3.\r\n	System	9505	IPX/SPX	Error
%2 failed to initialize because the driver device could not be created.\r\n	System	9506	IPX/SPX	Error
%2 could not bind to any adapters. The transport could not start.\r\n	System	9507	IPX/SPX	Error
Invalid DNS type.\r\n	DNS Server	9551	DNS	Error
Invalid IP address.\r\n	DNS Server	9552	DNS	Error
Invalid property.\r\n	DNS Server	9553	DNS	Error
Try DNS operation again later.\r\n	DNS Server	9554	DNS	Error
Record for given name and type is not unique.\r\n	DNS Server	9555	DNS	Error
DNS name does not comply with RFC specifications.\r\n	DNS Server	9556	DNS	Error
DNS name is a fully-qualified DNS name.\r\n	DNS Server	9557	DNS	Error
DNS name is dotted (multi-label).\r\n	DNS Server	9558	DNS	Error
DNS name is a single-part name.\r\n	DNS Server	9559	DNS	Error
DNS name contains an invalid character.\r\n	DNS Server	9560	DNS	Error
DNS name is entirely numeric.\r\n	DNS Server	9561	DNS	Error
DNS zone does not exist.\r\n	DNS Server	9601	DNS	Error
DNS zone information not available.\r\n	DNS Server	9602	DNS	Error
Invalid operation for DNS zone.\r\n	DNS Server	9603	DNS	Error
Invalid DNS zone configuration.\r\n	DNS Server	9604	DNS	Error
DNS zone has no start of authority (SOA) record.\r\n	DNS Server	9605	DNS	Error
DNS zone has no Name Server (NS) record.\r\n	DNS Server	9606	DNS	Error
DNS zone is locked.\r\n	DNS Server	9607	DNS	Error
DNS zone creation failed.\r\n	DNS Server	9608	DNS	Error
DNS zone already exists.\r\n	DNS Server	9609	DNS	Error
DNS automatic zone already exists.\r\n	DNS Server	9610	DNS	Error
Invalid DNS zone type.\r\n	DNS Server	9611	DNS	Error
Secondary DNS zone requires master IP address.\r\n	DNS Server	9612	DNS	Error
DNS zone not secondary.\r\n	DNS Server	9613	DNS	Error
Need secondary IP address.\r\n	DNS Server	9614	DNS	Error
WINS initialization failed.\r\n	DNS Server	9615	DNS	Error
Need WINS servers.\r\n	DNS Server	9616	DNS	Error
NBTSTAT initialization call failed.\r\n	DNS Server	9617	DNS	Error
Invalid delete of start of authority (SOA)\r\n	DNS Server	9618	DNS	Error
Primary DNS zone requires datafile.\r\n	DNS Server	9651	DNS	Error
Invalid datafile name for DNS zone.\r\n	DNS Server	9652	DNS	Error
Failed to open datafile for DNS zone.\r\n	DNS Server	9653	DNS	Error
Failed to write datafile for DNS zone.\r\n	DNS Server	9654	DNS	Error
Failure while reading datafile for DNS zone.\r\n	DNS Server	9655	DNS	Error
DNS record does not exist.\r\n	DNS Server	9701	DNS	Error
DNS record format error.\r\n	DNS Server	9702	DNS	Error
Node creation failure in DNS.\r\n	DNS Server	9703	DNS	Error
Unknown DNS record type.\r\n	DNS Server	9704	DNS	Error
DNS record timed out.\r\n	DNS Server	9705	DNS	Error
Name not in DNS zone.\r\n	DNS Server	9706	DNS	Error
CNAME loop detected.\r\n	DNS Server	9707	DNS	Error
Node is a CNAME DNS record.\r\n	DNS Server	9708	DNS	Error
A CNAME record already exists for given name.\r\n	DNS Server	9709	DNS	Error
Record only at DNS zone root.\r\n	DNS Server	9710	DNS	Error
DNS record already exists.\r\n	DNS Server	9711	DNS	Error
Secondary DNS zone data error.\r\n	DNS Server	9712	DNS	Error
Could not create DNS cache data.\r\n	DNS Server	9713	DNS	Error
DNS name does not exist.\r\n	DNS Server	9714	DNS	Error
Could not create pointer (PTR) record.\r\n	DNS Server	9715	DNS	Error
DNS domain was undeleted.\r\n	DNS Server	9716	DNS	Error
The directory service is unavailable.\r\n	DNS Server	9717	DNS	Error
DNS zone already exists in the directory service.\r\n	DNS Server	9718	DNS	Error
DNS server not creating or reading the boot file for the directory service integrated DNS zone.\r\n	DNS Server	9719	DNS	Error
DNS AXFR (zone transfer) complete.\r\n	DNS Server	9751	DNS	Error
DNS zone transfer failed.\r\n	DNS Server	9752	DNS	Error
Added local WINS server.\r\n	DNS Server	9753	DNS	Error
Secure update call needs to continue update request.\r\n	DNS Server	9754	DNS	Error
TCP/IP network protocol not installed.\r\n	DNS Server	9851	DNS	Error
No DNS servers configured for local system.\r\n	DNS Server	9852	DNS	Error
Unable to start a DCOM Server: %3.\r\nThe error:%n&quot;%%%2&quot;%nHappened while starting this command:%n%1\r\n	System	10000	DCOM	Error
Unable to start a DCOM Server: %3 as %4/%5.\r\nThe error:%n&quot;%%%2&quot;%nHappened while starting this command:%n%1\r\n	System	10001	DCOM	Error
Client Service for NetWare%0\r\n	Application	10001	NetWare Cred Mgr	Information
Unable to start the File Server for Macintosh service.\r\nA system specific error has occured.\r\nThe error code is in the data\r\n	System	10001	MacFile	Error
QoS RSVP service started.\r\n	System	10001	RSVP	Information
Access denied attempting to launch a DCOM Server.\r\nThe server is:%n%1%nThe user is %2/%3, SID=%4.\r\n	System	10002	DCOM	Error
Message from server %1. %n\r\n	Application	10002	NetWare Cred Mgr	Information
The File Server for Macintosh service failed to start. Unable to setup\r\nthe server to accept Remote Procedure Calls.\r\n	System	10002	MacFile	Error
QoS RSVP service stopped.\r\n	System	10002	RSVP	Information
Access denied attempting to launch a DCOM Server using DefaultLaunchPermssion.\r\nThe server is:%n%1%nThe user is %2/%3, SID=%4.\r\n	System	10003	DCOM	Error
The password for %1 on %2 has expired, with %3 grace logins left.%n\r\n	Application	10003	NetWare Cred Mgr	Warning
The File Server for Macintosh service failed to start. \r\nSecurity access checking of administrators could not be setup correctly.\r\n	System	10003	MacFile	Error
QoS RSVP service failed to start with error %1.\r\n	System	10003	RSVP	Error
A blocking operation was interrupted by a call to WSACancelBlockingCall.\r\n	Application	10004	WinSock	Error
DCOM got error &quot;%%%1&quot; and was unable to logon %2\\%3\r\nin order to run the server:%n%4\r\n	System	10004	DCOM	Error
Logins to the server has been disabled.%n\r\n	Application	10004	NetWare Cred Mgr	Error
The File Server for Macintosh service failed to start. \r\nThe Registry could not be opened.\r\n	System	10004	MacFile	Error
QoS RSVP service key in registry is missing or corrupted. Need to reinstall QoS RSVP service to correct this problem.\r\n	System	10004	RSVP	Error
DCOM got error &quot;%%%1&quot; attempting to start the service %2 with arguments &quot;%3&quot;\r\nin order to run the server:%n%4\r\n	System	10005	DCOM	Error
The password for %1 on %2 has expired.%n\r\n	Application	10005	NetWare Cred Mgr	Error
The File Server for Macintosh service failed to start. \r\nUnable to open the Appletalk Filing Protocol file system driver (SfmSrv.sys).\r\n	System	10005	MacFile	Error
Error %1 while opening QoS RSVP service parameters key, using default values for all RSVP configuration parameters.\r\n	System	10005	RSVP	Error
DCOM got error &quot;%%%1&quot; from the computer %2 when attempting to\r\nactivate the server:%n%3\r\n	System	10006	DCOM	Error
Gateway Service for NetWare%0\r\n	Application	10006	NetWare Cred Mgr	Information
The Registry contains an invalid value for the server name parameter.\r\nVerify the value of this parameter through the Computer Managerment Console \r\nand in the\r\nSYSTEM\\CurrentControlSet\\Services\\MacFile\\Parameters Registry key.\r\n	System	10006	MacFile	Error
Received I_AM_DSBM from another DSBM with IP address %1 and priority %2.\r\n	System	10006	RSVP	Information
DCOM got error &quot;%%%1&quot; when attempting to\r\nactivate the server:%n%2\r\n	System	10007	DCOM	Error
The File Server for Macintosh service failed to start. \r\nThe Registry contains an invalid value for the server options parameter.\r\nVerify the value of this parameter through the Computer Managerment Console \r\nand in the\r\nSYSTEM\\CurrentControlSet\	System	10007	MacFile	Error
Received I_AM_DSBM message from another DSBM with priority %1 higher than this DSBM's, hence stopping.\r\n	System	10007	RSVP	Error
DCOM got error &quot;%%%1&quot; from the computer %2 when attempting to\r\nthe server:%n%3 with file %4.\r\n	System	10008	DCOM	Error
Unable to Load DLL IPHLPAPI.DLL, RSVP will not be able to function without this DLL.\r\n	System	10008	RSVP	Error
The File Server for Macintosh service failed to start. \r\nThe Registry contains an invalid value for the maximum sessions parameter.\r\nVerify the value of this parameter through the Computer Managerment Console \r\nand in the\r\nSYSTEM\\CurrentControlSe	System	10008	MacFile	Error
DCOM was unable to communicate with the computer %1 using any of the configured\r\nprotocols.\r\n	System	10009	DCOM	Error
The file handle supplied is not valid.\r\n	Application	10009	WinSock	Error
Error %1 while registering for changes to RSVP service key in registry. RSVP will not be able to respond to changes to registry values.\r\n	System	10009	RSVP	Error
The File Server for Macintosh service failed to start. \r\nThe Registry contains an invalid value for the logon message parameter.\r\nVerify the value of this parameter through the Computer Managerment Console \r\nand in the\r\nSYSTEM\\CurrentControlSet\\	System	10009	MacFile	Error
The server %1 did not register with DCOM within the required timeout.\r\n	System	10010	DCOM	Error
Error %1 while creating the tracefile, hence RSVP will not write RSVP message details to the trace files.\r\n	System	10010	RSVP	Error
Obsolete:\r\nThe File Server for Macintosh service failed to start. \r\nThe Registry contains an invalid value for the maximum paged memory.\r\nChange the value of this parameter in the\r\nSYSTEM\\CurrentControlSet\\Services\\MacFile\\Parameters Registry	System	10010	MacFile	Error
The server %1 could not be contacted to establish the connection to the client\r\n	System	10011	DCOM	Error
Currently allocated bandwidth %1 by QoS ACS is more than the new upper limit %2 set via QoS ACS management console on interface %3. Changes made using QoS ACS management console does not affect existing reservations.\r\n	System	10011	RSVP	Error
Obsolete:\r\nThe File Server for Macintosh service failed to start. \r\nThe Registry contains an invalid value for the maximum non-paged memory\r\nparameter.\r\nChange the value of this parameter in the\r\nSYSTEM\\CurrentControlSet\\Services\\MacFile\\Par	System	10011	MacFile	Error
There is an assertion failure in DCOM.  Context follows:\r\n%1\r\n%2\r\n%3\r\n	System	10012	DCOM	Error
There is no upper bound on the amount of bandwidth available for RSVP reservations on interface %1.\r\n	System	10012	RSVP	Warning
The File Server for Macintosh service failed to start.\r\nAn error occurred while trying to initialize the AppleTalk Filing Protocol \r\ndriver (SfmSrv.sys) with server parameters.\r\n	System	10012	MacFile	Error
An attempt was made to access a socket in a way forbidden by its access permissions.\r\n	Application	10013	WinSock	Error
DCOM server attempted to listen on an invalid endpoint.\r\nProtseq:  %1\r\nEndpoint: %2\r\nFlags:    %3\r\n	System	10013	DCOM	Error
This host became DSBM for the subnet with %1 IP address.\r\n	System	10013	RSVP	Information
The File Server for Macintosh service failed to start.\r\nAn error occurred while trying to initialize Macintosh-Accessible volumes.\r\nThe error code is in the data.\r\n	System	10013	MacFile	Error
The system detected an invalid pointer address in attempting to use a pointer argument in a call.\r\n	Application	10014	WinSock	Error
This host is no longer the DSBM on subnet with %1 IP address.\r\n	System	10014	RSVP	Information
Failed to register volume &quot;%1&quot; with the File Server for Macintosh service.\r\nThis volume may be removed from the Registry by using the Server Manager or\r\nFile Manager tools.\r\n	System	10014	MacFile	Error
Changed maximum peak data rate per flow to be same as maximum data rate per flow as the peak data rate is lower than data rate on subnet %1.\r\n	System	10015	RSVP	Information
The File Server for Macintosh service failed to start. \r\nAn error occurred while trying to initialize the AppleTalk Filing \r\nProtocol driver (SfmSrv.sys) with the extension/creator/type associations.\r\n	System	10015	MacFile	Error
Can not send a Reservation Confirm message because RSVP can not find a route to the host with %1 IP address.\r\n	System	10016	RSVP	Warning
The File Server for Macintosh service failed to start.\r\nAn error occurred while trying to initialize the AppleTalk Filing Protocol \r\ndriver (SfmSrv.sys) with the server icons.\r\n	System	10016	MacFile	Error
Unable to allocate sufficient memory to start RSVP service.\r\n	System	10017	RSVP	Error
Failed to register icon &quot;%1&quot; with the File Server for Macintosh service.\r\nThis icon can no longer be used by the service.\r\n	System	10017	MacFile	Error
Encountered %1 error while loading the LPM %2.\r\n	System	10018	RSVP	Error
A system resouce could not be allocated for the File Server for Macintosh service.\r\nUnable to create a Server Helper thread.\r\nThe error code is in the data.\r\n	System	10018	MacFile	Error
The LPM %1 is missing one of the necessary functions.\r\n	System	10019	RSVP	Warning
The File Server for Macintosh service was unable to open a handle to the \r\nAppleTalk Filing Protocol file system driver (Sfmsrv.sys).\r\n	System	10019	MacFile	Error
Initialization of LPM %1 failed with error %2, ACS will continue to function without this LPM.\r\n	System	10020	RSVP	Error
The File Server for Macintosh service was unable to open a handle to the \r\nLocal Security Authority.\r\n	System	10020	MacFile	Error
Initialization of LPM %1 returned invalid Policy Element type %2, ACS will continue to function without this LPM.\r\n	System	10021	RSVP	Error
The File Server for Macintosh service was unable to contact a \r\ndomain controller to obtain domain information.\r\n	System	10021	MacFile	Error
An invalid argument was supplied.\r\n	Application	10022	WinSock	Error
LPM %1 initialized successfully and handles policy element of type %2.\r\n	System	10022	RSVP	Information
The File Server for Macintosh service was unable to send domain information \r\nto the AppleTalk Filing Protocol file system driver.\r\n	System	10022	MacFile	Error
Policy Control Module initialized successfully and there are %1 active LPMs.\r\n	System	10023	RSVP	Information
An error occured while checking user's credentials.\r\nOperation was not completed.\r\n	System	10023	MacFile	Error
Too many open sockets.\r\n	Application	10024	WinSock	Error
Policy Control Module failed to initialize with error (%1).\r\n	System	10024	RSVP	Error
A corrupt extension &quot;%1&quot; was detected in the Registry.\r\nThis value was ignored and processing was continued.\r\nChange the value for this extension in the \r\nSYSTEM\\CurrentControlSet\\Services\\MacFile\\Parameters\\Extensions Registry key.\r	System	10024	MacFile	Error
PCM received results from an LPM with invalid handle, ignoring the results.\r\n	System	10025	RSVP	Warning
Unable to stop the File Server for Macintosh service.\r\nA system specific error has occured.\r\nThe error code is in the data.\r\n	System	10025	MacFile	Error
PCM received results from an %1 LPM with invalid request handle, ignoring the results.\r\n	System	10026	RSVP	Warning
Not used\r\nThe Registry contains an invalid value for the path to the Macintosh\r\ncode-page file.\r\n	System	10026	MacFile	Error
Dropping results for GetPolicyData request from LPM %1 for reasons other than invalid handle and multiple results.\r\n	System	10027	RSVP	Warning
An error occurred while initializing the File Server for Macintosh service.\r\nA Server Helper thread could not be initialized.\r\nThe specific error code is in the data.\r\n	System	10027	MacFile	Error
PCM received results from an %1 LPM multiple times, ignoring the results.\r\n	System	10028	RSVP	Warning
The File Server for Macintosh service failed to start.\r\nUnable to load the AppleTalk Filing Protocol file system driver.\r\nThe specific error code is in the data.\r\n	System	10028	MacFile	Error
Error %1 while loading the ADSI library required to access directory.\r\n	System	10029	RSVP	Error
The Registry contains invalid information for the volume "%1". \r\nThe value was ignored and processing was continued.\r\nChange the value for this volume in the\r\nSYSTEM\\CurrentControlSet\\Services\\MacFile\\Parameters\\Volumes Registry key.\r\nRestart	System	10029	MacFile	Error
This host can not be DSBM on %1 interface as this DSBM is supported only on NT server.\r\n	System	10030	RSVP	Warning
The File Server for Macintosh service was unable to load resource\r\nstrings.\r\n	System	10030	MacFile	Error
Using registry value of %1 from %2 registry key.\r\n	System	10031	RSVP	Information
A corrupt Creator/Type pair with creator "%2" and type "%1" was detected\r\nin the Registry. This value was ignored and processing was continued.\r\nChange the value for this Creator/Type pair in the\r\nSYSTEM\\CurrentControlSet\\Services\\MacFile\\Parame	System	10031	MacFile	Error
Using registry value of %1 from %2 registry key in %3 subnet.\r\n	System	10032	RSVP	Information
The File Server for Macintosh service was unable to contact a domain controler.\r\nThe service will continue to retry periodically until it succeeds or\r\nuntil the service is manually stopped.\r\n	System	10032	MacFile	Warning
This host %1 is not in server list of %2 subnet. Add this server to list via QoS ACS management console.\r\n	System	10033	RSVP	Information
The File Server for Macintosh service started successfully.\r\n	System	10033	MacFile	Information
This host %1 can not be ACS on any of the subnets as this host has not been added to the ACS server lists in the Directory. Add this server to the list of valid servers for ACS via QoS ACS management console.\r\n	System	10034	RSVP	Information
A non-blocking socket operation could not be completed immediately.\r\n	Application	10035	WinSock	Error
This host can not be ACS since the Active Directory has not been properly configured via the QoS ACS management console. Please configure the subnets via the QoS ACS mangement console.\r\n	System	10035	RSVP	Warning
A blocking operation is currently executing.\r\n	Application	10036	WinSock	Error
Restarting ACS as the admission control mode has changed from service specific mode to aggregate mode.\r\n	System	10036	RSVP	Information
An operation was attempted on a non-blocking socket that already had an operation in progress.\r\n	Application	10037	WinSock	Error
Restarting ACS as the admission control mode has changed from aggregate mode to service specific mode.\r\n	System	10037	RSVP	Information
An operation was attempted on something that is not a socket.\r\n	Application	10038	WinSock	Error
Unloaded all LPMs other than %1, as %1 LPM makes policy decisions using all types of policy elements.\r\n	System	10038	RSVP	Information
A required address was omitted from an operation on a socket.\r\n	Application	10039	WinSock	Error
The WSAIoctl to snoop RSVP messages failed with %1 error, hence unable to receive RSVP messages on interface %2.\r\n	System	10039	RSVP	Error
A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.\r\n	Application	10040	WinSock	Error
This ACS has been configured to manage PPP interfaces but no PPP lines are detected on this host. So the ACS service is not functioning. Enable PPP lines or configure the ACS to manage shared media.\r\n	System	10040	RSVP	Warning
A protocol was specified in the socket function call that does not support the semantics of the socket type requested.\r\n	Application	10041	WinSock	Error
QoS RSVP supports IPSEC flows.\r\n	System	10041	RSVP	Information
An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.\r\n	Application	10042	WinSock	Error
QoS RSVP fails to register for SPI event notification -> abandon ipsec support.\r\n	System	10042	RSVP	Error
The requested protocol has not been configured into the system, or no implementation for it exists.\r\n	Application	10043	WinSock	Error
Shutting QoS RSVP service due to system failure.\r\n	System	10043	RSVP	Error
The support for the specified socket type does not exist in this address family.\r\n	Application	10044	WinSock	Error
Shutting QoS RSVP service due to a system failure.\r\n	System	10044	RSVP	Error
The attempted operation is not supported for the type of object referenced.\r\n	Application	10045	WinSock	Error
QoS RSVP fails to open a signaling socket (TCP) to communicate with clients due to a system failure.\r\n	System	10045	RSVP	Error
The protocol family has not been configured into the system or no implementation for it exists.\r\n	Application	10046	WinSock	Error
QoS RSVP fails to load TRAFFIC.DLL, so traffic control is not functional on this machine. Check %systemroot%\\system32 directory for TRAFFIC.DLL.\r\n	System	10046	RSVP	Warning
An address incompatible with the requested protocol was used.\r\n	Application	10047	WinSock	Error
QoS RSVP has failed to find any interfaces with traffic control enabled. Install QoS traffic control services via network and dial-up connections.\r\n	System	10047	RSVP	Warning
QoS RSVP has failed to find any interfaces with traffic control enabled. Install QoS traffic control services via network and dial-up connections.	System	10047	RSVP	Warning
Only one usage of each socket address (protocol/network address/port)\r\nis normally permitted.\r\n	Application	10048	WinSock	Error
QoS RSVP fails to register as a traffic control client. Check for the presence of QoS packet scheduler, the classical IP over ATM provider, or another traffic control provider.\r\n	System	10048	RSVP	Warning
The requested address is not valid in its context.\r\n	Application	10049	WinSock	Error
QoS RSVP fails to install a network control flow for RSVP packets. On a congested network, RSVP message could be dropped.\r\n	System	10049	RSVP	Warning
A socket operation encountered a dead network.\r\n	Application	10050	WinSock	Error
QoS RSVP fails to uninstall a flow for RSVP packets.\r\n	System	10050	RSVP	Warning
A socket operation was attempted to an unreachable network.\r\n	Application	10051	WinSock	Error
No traffic control capability on the specific interface with %1 IP address.\r\n	System	10051	RSVP	Warning
The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.\r\n	Application	10052	WinSock	Error
Interface is not available from TC.\r\n	System	10052	RSVP	Warning
An established connection was aborted by the software in your host machine.\r\n	Application	10053	WinSock	Error
This host will not function as ACS on the subnet with %1 IP address, as ACS is not enabled on this subnet.\r\n	System	10053	RSVP	Warning
An existing connection was forcibly closed by the remote host.\r\n	Application	10054	WinSock	Error
ACS has not been configured for %1 subnet. Please add ACS configuration data using the QoS ACS management console.\r\n	System	10054	RSVP	Information
An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.\r\n	Application	10055	WinSock	Error
QoS RSVP fails to engage with the IPSEC Policy Agent\r\n	System	10055	RSVP	Warning
A connect request was made on an already connected socket.\r\n	Application	10056	WinSock	Error
Rogue server detection is disabled via registry.\r\n	System	10056	RSVP	Information
A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.\r\n	Application	10057	WinSock	Error
DSBM found per service limits in the configuration data of %1 subnet, hence operating in DiffServ mode.\r\n	System	10057	RSVP	Warning
A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.\r\n	Application	10058	WinSock	Error
QoS RSVP failure in the initialization of memory debugging functions.\r\n	System	10058	RSVP	Warning
Too many references to some kernel object.\r\n	Application	10059	WinSock	Error
Found another DSBM with IP address %1 on the %2 interface, hence this host will not attempt to be DSBM on this interface.\r\n	System	10059	RSVP	Warning
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.\r\n	Application	10060	WinSock	Error
ACS will not do policy admission control as this ACS is configured to do Resource admission control only.\r\n	System	10060	RSVP	Warning
No connection could be made because the target machine actively refused it.\r\n	Application	10061	WinSock	Error
Version number %1 returned by %2 LPM is unsupported by the Policy Control Module in ACS.\r\n	System	10061	RSVP	Warning
Cannot translate name.\r\n	Application	10062	WinSock	Error
PCM received invalid results from an %1 LPM, ignoring the results.\r\n	System	10062	RSVP	Warning
Name component or name was too long.\r\n	Application	10063	WinSock	Error
ACS on this host is managing the non-shared media interface with %1 IP address.\r\n	System	10063	RSVP	Information
A socket operation failed because the destination host was down.\r\n	Application	10064	WinSock	Error
There are no non-shared media interfaces on this host which are manageable by this ACS.\r\n	System	10064	RSVP	Warning
A socket operation was attempted to an unreachable host.\r\n	Application	10065	WinSock	Error
This host is no longer the DSBM on interface %1 as this interface disappeared.\r\n	System	10065	RSVP	Warning
Cannot remove a directory that is not empty.\r\n	Application	10066	WinSock	Error
QoS Admission Control Service started.\r\n	System	10066	RSVP	Information
A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.\r\n	Application	10067	WinSock	Error
QoS Admission Control Service stopped.\r\n	System	10067	RSVP	Information
Ran out of quota.\r\n	Application	10068	WinSock	Error
QoS Admission Control Service failed to start with error %1.\r\n	System	10068	RSVP	Error
Ran out of disk quota.\r\n	Application	10069	WinSock	Error
File handle reference is no longer available.\r\n	Application	10070	WinSock	Error
Item is not available locally.\r\n	Application	10071	WinSock	Error
WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.\r\n	Application	10091	WinSock	Error
The Windows Sockets version requested is not supported.\r\n	Application	10092	WinSock	Error
Either the application has not called WSAStartup, or WSAStartup failed.\r\n	Application	10093	WinSock	Error
Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.\r\n	Application	10101	WinSock	Error
No more results can be returned by WSALookupServiceNext.\r\n	Application	10102	WinSock	Error
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.\r\n	Application	10103	WinSock	Error
The procedure call table is invalid.\r\n	Application	10104	WinSock	Error
The requested service provider is invalid.\r\n	Application	10105	WinSock	Error
The requested service provider could not be loaded or initialized.\r\n	Application	10106	WinSock	Error
A system call that should never fail has failed.\r\n	Application	10107	WinSock	Error
No such service is known. The service cannot be found in the specified name space.\r\n	Application	10108	WinSock	Error
The specified class was not found.\r\n	Application	10109	WinSock	Error
No more results can be returned by WSALookupServiceNext.\r\n	Application	10110	WinSock	Error
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.\r\n	Application	10111	WinSock	Error
A database query failed because it was actively refused.\r\n	Application	10112	WinSock	Error
Unable to start DNS Client Service.\r\nFailed to load DLL %2, Error: %1.\r\nPlease reinstall this DLL from installation CD.\r\n	DNS Server	11000	DNS	Error
No such host is known.\r\n	Application	11001	WinSock	Error
Unable to start DNS Client service. Can not find entry %3 in DLL %2.\r\nPlease reinstall this DLL from installation CD. For specific error\r\ncode, click the Record Data tab.\r\n	DNS Server	11001	DNS	Error
Error (%1) while retrieving the AcsService account name, password and domain name. Enter this data using the QoS ACS management console.\r\n	System	11001	RSVP	Error
This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.\r\n	Application	11002	WinSock	Error
Unable to start the DNS Client service. The system could not register a\r\nservice control handler and could be out of resources. Close any\r\napplications not in use or reboot the computer. For specific error\r\ncode, click the Record Data tab.\r\n	DNS Server	11002	DNS	Error
Error (%1) while validating AcsService account user name, password. Enter the correct account user name, password using the QoS ACS management console.\r\n	System	11002	RSVP	Error
A non-recoverable error occurred during a database lookup.\r\n	Application	11003	WinSock	Error
Unable to start DNS Client service. The system could\r\nnot create a termination event for this service and\r\ncould be out of resources. Close any applications not\r\nin use or reboot the computer. For specific error code,\r\nclick the Record Data tab.\r	DNS Server	11003	DNS	Error
MSIDLPM could not logon to Kerberos KeyDistribution Center using the supplied account name, password. Hence MSIDLPM will not initialize.\r\n	System	11003	RSVP	Error
The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for.\r\n	Application	11004	WinSock	Error
Unable to start DNS Client service. Could not start the\r\nRemote Procedure Call (RPC) interface for this service.\r\nTo correct the problem, you may restart the RPC and DNS\r\nClient services. To do so, use the following commands at a command\r\nprompt:	DNS Server	11004	DNS	Error
Error (%1) while cracking the Kerberos ticket in the Identity Policy element. One of the possible reason could be that ACS is configured with a bad password. Enter the correct password using the QoS ACS management console.\r\n	System	11004	RSVP	Error
At least one reserve has arrived.\r\n	Application	11005	WinSock	Error
Unable to start DNS Client service. The system could not register\r\nshutdown notification for this service and could be out of resources.\r\nTry closing any applications not in use or reboot the computer.\r\n	DNS Server	11005	DNS	Error
Error (%1) while decrypting the policy locator in the Identity Policy element. One of the possible reason could be that ACS is configured with a bad password. Enter the correct password using the QoS ACS management console.\r\n	System	11005	RSVP	Error
At least one path has arrived.\r\n	Application	11006	WinSock	Error
Unable to start DNS Client service. Could not update status with\r\nService Control Manager. To correct the problem, you may restart\r\nthe RPC and DNS Client services. To do so, use the following commands\r\nat a command prompt: (1) type "net start rpc"	DNS Server	11006	DNS	Error
ACS was not able to get the Domain Controller name to access the Active Directory, and failed with (%1) error.\r\n	System	11006	RSVP	Error
There are no senders.\r\n	Application	11007	WinSock	Error
Unable to start DNS Client service because the system failed to allocate\r\nmemory and may be out of available memory. Try closing any applications not\r\nin use or reboot the computer. For specific error code, click the Record\r\nData tab.\r\n	DNS Server	11007	DNS	Error
Error (%1) while opening the root container in DS. ACS configuration parameters are stored under the root container.\r\n	System	11007	RSVP	Error
There are no receivers.\r\n	Application	11008	WinSock	Error
Error (%1) while opening the Enterprise policy container in DS. Enterprise level ACS configuration parameters are stored in this DS container.\r\n	System	11008	RSVP	Error
Reserve has been confirmed.\r\n	Application	11009	WinSock	Error
Error (%1) while opening the %2 subnet container in DS. Configuration data for this subnet are stored in this container. Enter this data using the QoS ACS management console.\r\n	System	11009	RSVP	Error
Error due to lack of resources.\r\n	Application	11010	WinSock	Error
Error (%1) while searching for ACS policies in the subnet container with IP address %2. Enter ACS policies using the QoS ACS management console.\r\n	System	11010	RSVP	Error
Rejected for administrative reasons - bad credentials.\r\n	Application	11011	WinSock	Error
Error (%1) while reading ACS policies in the subnet container with IP address %2. Enter ACS policies using the QoS ACS management console.\r\n	System	11011	RSVP	Error
Unknown or conflicting style.\r\n	Application	11012	WinSock	Error
Error (%1) while obtaining the credential handle for AcsService account. This handle is used to decode Kerberos tickets. Enter correct account user name, password using the QoS ACS management console.\r\n	System	11012	RSVP	Error
Problem with some part of the filterspec or providerspecific buffer in general.\r\n	Application	11013	WinSock	Error
Problem with some part of the flowspec.\r\n	Application	11014	WinSock	Error
General QOS error.\r\n	Application	11015	WinSock	Error
An invalid or unrecognized service type was found in the flowspec.\r\n	Application	11016	WinSock	Error
An invalid or inconsistent flowspec was found in the QOS structure.\r\n	Application	11017	WinSock	Error
Invalid QOS provider-specific buffer.\r\n	Application	11018	WinSock	Error
An invalid QOS filter style was used.\r\n	Application	11019	WinSock	Error
An invalid QOS filter type was used.\r\n	Application	11020	WinSock	Error
An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.\r\n	Application	11021	WinSock	Error
An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.\r\n	Application	11022	WinSock	Error
An incorrect number of flow descriptors was specified in the QOS structure.\r\n	Application	11023	WinSock	Error
An unrecognized object was found in the QOS provider-specific buffer.\r\n	Application	11024	WinSock	Error
An invalid policy object was found in the QOS provider-specific buffer.\r\n	Application	11025	WinSock	Error
An invalid QOS flow descriptor was found in the flow descriptor list.\r\n	Application	11026	WinSock	Error
An invalid or inconsistent flowspec was found in the QOS provider specific buffer.\r\n	Application	11027	WinSock	Error
An invalid FILTERSPEC was found in the QOS provider-specific buffer.\r\n	Application	11028	WinSock	Error
An invalid shape discard mode object was found in the QOS provider specific buffer.\r\n	Application	11029	WinSock	Error
An invalid shaping rate object was found in the QOS provider-specific buffer.\r\n	Application	11030	WinSock	Error
A reserved policy element was found in the QOS provider-specific buffer.\r\n	Application	11031	WinSock	Error
The DNS Client service could not contact any DNS servers for a repeated number of attempts. For the next %3 seconds the DNS Client service will not use the network to avoid further network performance problems. It will resume its normal behavior after tha	DNS Server	11050	DNS	Warning
The DNS Client service failed to reach DNS server at address %1. It will\r\nnot use this DNS server for %2 seconds.\r\n	DNS Server	11051	DNS	Warning
The system failed to register network adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS Server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n	DNS Server	11150	DNS	Warning
The system failed to register network adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n	DNS Server	11151	DNS	Warning
The system failed to register network adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n	DNS Server	11152	DNS	Warning
The system failed to register network adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n	DNS Server	11153	DNS	Warning
The system failed to register network adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n	DNS Server	11154	DNS	Warning
The system failed to register network adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n	DNS Server	11155	DNS	Warning
The system failed to register pointer (PTR) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update t	DNS Server	11156	DNS	Warning
The system failed to register pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update t	DNS Server	11157	DNS	Warning
The system failed to register pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update t	DNS Server	11158	DNS	Warning
The system failed to register pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update t	DNS Server	11158	DNS	Warning
The system failed to update and remove registration for the network\r\nadapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %	DNS Server	11159	DNS	Warning
The system failed to register pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update t	DNS Server	11160	DNS	Warning
The system failed to register pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update t	DNS Server	11161	DNS	Warning
The system failed to register host (A) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%	DNS Server	11162	DNS	Warning
The system failed to register host (A) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%	DNS Server	11163	DNS	Warning
The system failed to register host (A) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%	DNS Server	11164	DNS	Warning
The system failed to register host (A) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%	DNS Server	11165	DNS	Warning
The system failed to register host (A) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%	DNS Server	11166	DNS	Warning
The system failed to register host (A) resource records (RRs) for\r\nnetwork adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%	DNS Server	11167	DNS	Warning
The system failed to update and remove registration for the\r\nnetwork adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %	DNS Server	11180	DNS	Warning
The system failed to update and remove registration for the\r\nnetwork adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %	DNS Server	11181	DNS	Warning
The system failed to update and remove host (A) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to ser	DNS Server	11182	DNS	Warning
The system failed to update and remove registration for the network\r\nadapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %	DNS Server	11183	DNS	Warning
The system failed to update and remove host (A) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to ser	DNS Server	11183	DNS	Warning
The system failed to update and remove registration for the network\r\nadapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %	DNS Server	11184	DNS	Warning
The system failed to update and remove the DNS registration for the\r\nnetwork adapter with settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to se	DNS Server	11185	DNS	Warning
The system failed to update and remove pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent	DNS Server	11186	DNS	Warning
The system failed to update and remove pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent	DNS Server	11187	DNS	Warning
The system failed to update and remove pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent	DNS Server	11188	DNS	Warning
The system failed to update and remove pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent	DNS Server	11189	DNS	Warning
The system failed to update and remove pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent	DNS Server	11190	DNS	Warning
The system failed to update and remove pointer (PTR) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent	DNS Server	11191	DNS	Warning
The system failed to update and remove host (A) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to ser	DNS Server	11192	DNS	Warning
The system failed to update and remove host (A) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to ser	DNS Server	11193	DNS	Warning
The system failed to update and remove host (A) resource records (RRs) for network adapter%nwith settings:%n%n   Adapter Name : %1%n   Host Name : %2%n   Primary Domain Suffix : %3%n   DNS server list :%n     %4%n   Sent update to server : %5%n	DNS Server	11194	DNS	Warning
The system failed to update and remove host (A) resource records (RRs) for network adapter%nwith settings:%n%n   Adapter Name : %1%n   Host Name : %2%n   Primary Domain Suffix : %3%n   DNS server list :%n     %4%n   Sent update to server : %5%n	DNS Server	11194	DNS	Warning
The system failed to update and remove host (A) resource records (RRs) for network adapter%nwith settings:%n%n   Adapter Name : %1%n   Host Name : %2%n   Primary Domain Suffix : %3%n   DNS server list :%n     %4%n   Sent update to server : %5%n	DNS Server	11195	DNS	Warning
The system failed to update and remove host (A) resource records (RRs) for network adapter%nwith settings:%n%n   Adapter Name : %1%n   Host Name : %2%n   Primary Domain Suffix : %3%n   DNS server list :%n     %4%n   Sent update to server : %5%n	DNS Server	11195	DNS	Warning
The system failed to update and remove host (A) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to ser	DNS Server	11196	DNS	Warning
The system failed to update and remove host (A) resource records (RRs) for network adapter%nwith settings:%n%n   Adapter Name : %1%n   Host Name : %2%n   Primary Domain Suffix : %3%n   DNS server list :%n     %4%n   Sent update to server : %5%n	DNS Server	11196	DNS	Warning
The system failed to update and remove host (A) resource records (RRs)\r\nfor network adapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to ser	DNS Server	11197	DNS	Warning
The system failed to update and remove host (A) resource records (RRs) for network adapter%nwith settings:%n%n   Adapter Name : %1%n   Host Name : %2%n   Primary Domain Suffix : %3%n   DNS server list :%n     %4%n   Sent update to server : %5%n	DNS Server	11197	DNS	Warning
The system registered network adapter with settings :%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n  IP Address(es) :%n\r\n    %6\r\	DNS Server	11200	DNS	Information
The system registered pointer (PTR) resource records (RRs) for network\r\nadapter%nwith settings:%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Adapter-specific Domain Suffix : %3%n\r\n  Primary Domain Suffix : %4%n\r\n  DNS server list :%n\r\n	DNS Server	11201	DNS	Information
The system registered host (A) resource records (RRs) for network\r\nadapter%nwith settings :%n%n\r\n  Adapter Name : %1%n\r\n  Host Name : %2%n\r\n  Primary Domain Suffix : %3%n\r\n  DNS server list :%n\r\n    %4%n\r\n  Sent update to server : %5%n\r\n	DNS Server	11202	DNS	Information
The WMI service was unable to open the WMI service device. The status code is in the additional data.\r\n	System	12000	WMI	Error
Unable to delete the directory "Network Trash Folder" from volume "%1".\r\n	System	12001	MacFile	Error
Unable to create the directory &quot;Network Trash Folder&quot; on volume "%1".\r\n	System	12002	MacFile	Error
Unable to read internal server information from file &quot;%1&quot;.\r\n	System	12003	MacFile	Error
Unable to write internal server information to file &quot;%1&quot;.\r\n	System	12004	MacFile	Error
Not used.\r\nUnable to lock a range of bytes for &quot;%1&quot;.\r\n	System	12005	MacFile	Error
Unable to unlock a range of bytes for &quot;%1&quot;.\r\n	System	12006	MacFile	Error
Unable to query the file size for &quot;%1&quot;.\r\n	System	12007	MacFile	Error
Unable to set the file size for &quot;%1&quot;.\r\n	System	12008	MacFile	Error
Unable to query time/date information for &quot;%1&quot;.\r\n	System	12009	MacFile	Error
Unable to set time/date information for "&quot;%1&quot;.\r\n	System	12010	MacFile	Error
Unable to query alternate data stream names for &quot;%1&quot;.\r\n	System	12011	MacFile	Error
Unable to query the short (<NOBR>MS-DOS</NOBR> compatible) filename for &quot;%1&quot;.\r\n	System	12012	MacFile	Error
Not used.\r\nUnable to obtain security information.\r\n	System	12013	MacFile	Error
Unable to query the file system type for directory &quot;%1&quot;.\r\n	System	12014	MacFile	Error
Desktop database for volume &quot;%1&quot; could not be loaded. Reconstructing the database.\r\n	System	12015	MacFile	Error
Not used.\r\nUnable to load the MSV1_0 authentication package.\r\n	System	12016	MacFile	Error
Unable to load the Macintosh character set.\r\n	System	12017	MacFile	Error
Unable to register the server name with the network. Make sure no other server is using this name.\r\n	System	12018	MacFile	Error
Not used.\r\nAn error occurred on the network.\r\n	System	12019	MacFile	Error
Unable to process requests due to insufficient resources.\r\n	System	12020	MacFile	Error
Unable to send attention to a connected user.\r\n	System	12021	MacFile	Error
Unable to allocate a system resource (IRP).\r\nSystem may be low on memory.\r\n	System	12022	MacFile	Error
Unable to allocate a system resouces (Memory Descriptor List - MDL).\r\nSystem may be low on memory.\r\n	System	12023	MacFile	Error
An internal error occurred.\r\nError occured while waiting on single object to change state.\r\n	System	12024	MacFile	Error
Unable to create a new thread.\r\n	System	12025	MacFile	Error
Not used.\r\nUnable to create a process.\r\n	System	12026	MacFile	Error
Unable to query contents of directory &quot;%1&quot;.\r\n	System	12027	MacFile	Error
Error in creating File object for current Appletalk address.\r\n	System	12028	MacFile	Error
Not used.\r\nAn error occured on the network.\r\n	System	12029	MacFile	Error
Not used.\r\nAn error occurred on the network.\r\n	System	12030	MacFile	Error
An error occured while setting the File Server status block during initialization. The File Server was not started.\r\n	System	12031	MacFile	Error
Not used.\r\nAn error occurred on the network.\r\n	System	12032	MacFile	Error
Volume %1 is being reindexed.\r\nThe volume will be available for use after indexing is over.\r\n	System	12035	MacFile	Error
An error occured while creating the system-level process token during\r\nthe File Server driver initialization.\r\nThe File Server could not be started.\r\n	System	12036	MacFile	Error
Not used.\r\nUnable to register with the Local Security Authority.\r\n	System	12037	MacFile	Error
Not used.\r\nUnable to create a device object.\r\n	System	12038	MacFile	Error
Unable to query group membership for the user.\r\n	System	12039	MacFile	Error
Unable to translate Macintosh used ANSI characters into Unicode characters.\r\nThe specfic error is in the data.\r\n	System	12040	MacFile	Error
Unable to translate Unicode characters into Macintosh used ANSI characters.\r\nThe specfic error is in the data.\r\n	System	12041	MacFile	Error
Internal server information for file &quot;%1&quot; was corrupted. Setting default information.\r\n	System	12042	MacFile	Error
Unable to update the Desktop database for volume &quot;%1&quot;. There may not be enough disk space.\r\n	System	12043	MacFile	Error
Not used.\r\nUnable to impersonate a client.\r\n	System	12044	MacFile	Error
Not used.\r\nUnable to revert from impersonating a client.\r\n	System	12045	MacFile	Error
Unable to allocate paged memory resource.\r\n	System	12046	MacFile	Error
Unable to allocate nonpaged memory resources.\r\n	System	12047	MacFile	Error
Not used.\r\nUnable to authenticate user.\r\n	System	12048	MacFile	Error
Unable to logon user &quot;%1&quot;.\r\n	System	12049	MacFile	Error
The maximum directory ID has been reached on volume &quot;%1&quot;. No more files or directories can be created on this volume.\r\n	System	12050	MacFile	Error
Unable to update the index database for the Macintosh-Accessible volume &quot;%1&quot;. There may not be enough disk space.\r\n	System	12051	MacFile	Error
A directory change notification was missed on volume &quot;%1&quot;.\r\n	System	12052	MacFile	Error
Session from user &quot;%2&quot; was timed out and disconnected by the server.\r\nThe AppleTalk address of the Macintosh workstation is in the data.\r\n	System	12053	MacFile	Error
Guest session was timed out and disconnected by the server.\r\nThe AppleTalk address of the Macintosh workstation is in the data.\r\n	System	12054	MacFile	Error
Not used.\r\nA uniprocessor driver was loaded on a multiprocessor system. \r\nThe driver could not load.\r\n	System	12055	MacFile	Error
Updating the Desktop database version for volume "%1".\r\n	System	12056	MacFile	Error
Number of files and folders in volume "%1" is greater than 65535.\r\nOlder Macintosh clients may not function correctly in this situation due\r\nto Macintosh volume limitation.\r\n	System	12057	MacFile	Error
Unable to activate the volume "%1"\r\n	System	12058	MacFile	Error
Unable to activate volume "%1".  The available non-paged memory in the system * is not adequate to handle the large number of folders within this volume.  \r\nReducing the number of folders can help.\r\n	System	12059	MacFile	Error
Unable to allocate virtual memory.  \r\nReducing the number of folders can help.\r\n	System	12060	MacFile	Error
Session from user &quot;%2&quot; was timed out and disconnected by the server.\r\nThe IP address of the Macintosh workstation is in the data.\r\n	System	12061	MacFile	Error
Guest session was timed out and disconnected by the server.\r\nThe IP address of the Macintosh workstation is in the data.\r\n	System	12062	MacFile	Error
Index database for volume %1 is being updated because the server detected an older\r\nversion.  The volume will be visible on the network after indexing is complete.  For\r\nvery large volumes, this can take several minutes.\r\n	System	12063	MacFile	Information
The binary MOF in the resource named %1 in the image file %2 is not valid.\r\n	System	12100	WMI	Warning
The binary MOF in the resource named %1 in the image file %2 could not be loaded.\r\n	System	12101	WMI	Warning
The registration information for the image file %1 is not valid.\r\n	System	12102	WMI	Warning
The registry path (%1) passed by a kernel mode driver is invalid. The driver device object is in the additional data.\r\n	System	12103	WMI	Warning
An event was fired specifying a static instance name that could not be resolved.\r\n	System	12104	WMI	Warning
An error occured while attempting to query for the event data referenced by a fired event.\r\n	System	12105	WMI	Warning
SAM failed to write changes to the database. This is most likely due to\r\na memory or disk-space shortage. The SAM database will be restored to\r\nan earlier state. Recent changes will be lost. Check the disk-space\r\navailable and maximum pagefile size	System	12288	SAM	Warning
SAM failed to restore the database to an earlier state. SAM has shutdown.\r\nYou must reboot the machine to re-enable SAM.\r\n	System	12289	SAM	Warning
SAM failed to update the SAM database. It will try again next time you\r\nreboot the machine.\r\n	System	12290	SAM	Warning
SAM failed to start the TCP/IP or SPX/IPX listening thread\r\n	System	12291	SAM	Warning
There are two or more objects that have the same account name attribute\r\nin the SAM database. The Distinguished Name of the account is %1. Delete\r\nall duplicate accounts but ensure that the original account remains.\r\nFor computer accounts, the most	System	12292	SAM	Warning
There are two or more objects that have the same SID attribute in the SAM\r\ndatatbase. The Distinguished Name of the account is %1. All duplicate \r\naccounts have been deleted. Check the event log for additional Duplicates\r\n	System	12293	SAM	Warning
The SAM database was unable to lockout the account of %1 due to a resource\r\nerror, such as a hard disk write failure (the specific error code is in the\r\nerror data) . Accounts are locked after a certain number of bad passwords are\r\nprovided so pleas	System	12294	SAM	Warning
The SAM database attempted to delete the file %1 as it contains account \r\ninformation that is no longer used.  The error is in the record data. Please\r\nhave an admin delete this file.\r\n	System	12295	SAM	Warning
The SAM database attempted to clear the directory %1 in order to remove files\r\nthat were once used by the Directory Service. The error is in record data. \r\nPlease have an admin delete these files.\r\n	System	12296	SAM	Warning
%1 is now the primary domain controller for the domain.\r\n	System	12297	SAM	Warning
The account %1 cannot be converted to be a domain controller account as its object class attribute in the directory is not computer or is not derived from computer.If this is caused by an attempt to install a pre windows 2000 domain controller in a w	System	12298	SAM	Warning
An internal error occured in Distributed Link Tracking.  The error code was %1.\r\n	System	12500	trksvr	Error
Service started successfully\r\n	System	12501	trksvr	Information
Service failed to start.  Error = %1\r\n	System	12502	trksvr	Error
The Distributed Link Tracking log was corrupt on volume %1: and has been re-created.  This log is used to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.\r\n	System	12503	trksvr	Error
The Distributed Link Tracking volume ID quota on this machine has been exceeded.  As a result, it is not possible to create new volume IDs.  Distributed Link Tracking normally uses these volume IDs to automatically repair file links, such as Shell Shortcu	System	12504	trksvr	Warning
A new volume ID has been assigned for %1:%n%2%n%n\r\nThis ID is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.  If there previously were links to	System	12505	trksvr	Information
Ownership of the volume ID for %1: has been successfully claimed.  This volume ID is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.\r\n	System	12506	trksvr	Information
The volume ID for %1: has been reset, since it was a duplicate of that on %2:.  This volume ID is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken.\	System	12507	trksvr	Information
The move table quota for Distributed Link Tracking in this domain has been exceeded.  This table is used by Distributed Link Tracking to automatically repair file links, such as Shell Shortcuts and OLE links, when for some reason those links become broken	System	12508	trksvr	Warning
Emulated LAN (%2) - LAN Emulation Configure Request failed. The LAN Emulation Service does not support the version (1.0) supported by this LAN Emulation Client.\r\n	System	13100	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The LAN Emulation Service does not support the version (1.0) supported by this LAN Emulation Client.\r\n	System	13101	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The configuration parameters are incompatible with the desired Emulated LAN.\r\n	System	13102	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The join parameters are incompatible with the desired Emulated LAN.\r\n	System	13103	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. This LAN Emulation client attempted to register a MAC address (%3) that is already in use by another client.\r\n	System	13104	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. This LAN Emulation client attempted to register an ATM address (%3) that is already in use by another client.\r\n	System	13105	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The LAN Emulation Service does not have sufficient resources to process the request.\r\n	System	13106	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The LAN Emulation Service does not have sufficient resources to process the request.\r\n	System	13107	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The LAN Emulation Service disallowed this request for security reasons.\r\n	System	13108	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The LAN Emulation Service disallowed this request for security reasons.\r\n	System	13109	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The supplied LAN Emulation Client ID is invalid.\r\n	System	13110	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The supplied LAN Emulation Client ID is invalid.\r\n	System	13111	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The supplied MAC Address (%3) cannot be a multicast address or, on an Ethernet/802.3 Emulated LAN, a Route Descriptor.\r\n	System	13112	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The supplied MAC Address (%3) cannot be a multicast address or, on an Ethernet/802.3 Emulated LAN, a Route Descriptor.\r\n	System	13113	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The supplied ATM Address (%3) is not in a recognizable format.\r\n	System	13114	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Join Request failed. The supplied ATM Address (%3) is not in a recognizable format.\r\n	System	13115	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The LAN Emulation client is not recognized.\r\n	System	13116	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. No other information is available.\r\n	System	13117	AtmElan	Error
Emulated LAN (%2) - LAN Emulation Configure Request failed. The LAN Emulation client has not provided sufficient information to allow assignment to an Emulated LAN.\r\n	System	13118	AtmElan	Error
The Local ATM address (%2) can not be used because it is already registered by another node in the network.\r\n	System	13200	AtmElan	Error
File Replication Service\r\n	System	13500	NtFrs	Error
The File Replication Service is starting.\r\n	System	13501	NtFrs	Information
The File Replication Service is stopping.\r\n	System	13502	NtFrs	Information
The File Replication Service has stopped.\r\n	System	13503	NtFrs	Information
The File Replication Service stopped without cleaning up.\r\n	System	13504	NtFrs	Error
The File Replication Service has stopped after taking an assertion failure.\r\n	System	13505	NtFrs	Error
The File Replication Service failed a consistency check (%3) in "%1" at line %2.\r\n%n\r\n%nThe File Replication Service will restart automatically at a later time.\r\nFor more information about the automatic restart right click on\r\nMy Computer and then	System	13506	NtFrs	Error
The File Replication Service cannot start replica set %1 on computer %2\r\nfor directory %3 because the type of volume %4 is not NTFS 5.0 or later.\r\n%n\r\n%nThe volume's type can be found by typing "chkdsk %4".\r\n%n\r\n%nThe volume can be upgraded to N	System	13507	NtFrs	Error
The File Replication Service is having trouble enabling replication\r\nfrom %1 to %2 for %3; retrying.\r\n	System	13508	NtFrs	Warning
The File Replication Service has enabled replication from %1 to %2 for %3\r\nafter repeated retries.\r\n	System	13509	NtFrs	Warning
The File Replication Service on the computer %1 cannot communicate with\r\nthe File Replication Service on the computer %2.\r\n%n\r\n%nVerify that the computer %2 is up and running.\r\n%n\r\n%nVerify that the File Replication Service is running on %2 by\r	System	13510	NtFrs	Error
The File Replication Service is stopping on computer %1 because there is no free\r\nspace on the volume containing %2.\r\n%n\r\n%nThe available space on the volume can be found by typing\r\n"dir %2".\r\n%n\r\n%nOnce free space is made available on the vol	System	13511	NtFrs	Error
The File Replication Service has detected an enabled disk write cache\r\non the drive containing the directory %2 on the computer %1.\r\nThe File Replication Service might not recover when power to the\r\ndrive is interrupted and critical updates are lost	System	13512	NtFrs	Warning
The File Replication Service on computer %1 is stopping because the\r\ndatabase %2 is corrupted.\r\n%n\r\n%nThe database can be recovered by typing "esentutl /d %2 /l%3 /s%4".\r\n%n\r\n%nOnce the database has been successfully recovered the\r\nFile Replic	System	13513	NtFrs	Error
The File Replication Service may be preventing the computer %1 from becoming a\r\ndomain controller while the system volume is being initialized with data\r\nfrom another domain controller and then shared as SYSVOL.\r\n%n\r\n%nType "net share" to check fo	System	13514	NtFrs	Warning
The File Replication Service may be preventing the computer %1 from becoming a\r\ndomain controller while the system volume is being initialized and then\r\nshared as SYSVOL.\r\n%n\r\n%nType "net share" to check for the SYSVOL share. The File Replication\	System	13515	NtFrs	Warning
The File Replication Service is no longer preventing the computer %1 from\r\nbecoming a domain controller. The system volume has been successfully\r\ninitialized and the Netlogon service has been notified that the system\r\nvolume is now ready to be share	System	13516	NtFrs	Information
The File Replication Service will not check access to the API "%1".\r\n%n\r\n%nAccess checks can be enabled for "%1" by running regedt32.\r\n%n\r\n%nClick on Start, Run, and type regedt32.\r\n%n\r\n%nClick on the window entitled HKEY_LOCAL_MACHINE. Double	System	13517	NtFrs	Warning
The File Replication Service did not grant the user "%3" access to the\r\nAPI "%1".\r\n%n\r\n%nPermissions for "%1" can be changed by running regedt32.\r\n%n\r\n%nClick on Start, Run, and type regedt32.\r\n%n\r\n%nClick on the window entitled HKEY_LOCAL_M	System	13518	NtFrs	Warning
The File Replication Service could not grant an unknown user access to the\r\nAPI "%1".\r\n%n\r\n%nAccess checks can be disabled for "%1" by running regedt32.\r\n%n\r\n%nClick on Start, Run, and type regedt32.\r\n%n\r\n%nClick on the window entitled HKEY_	System	13519	NtFrs	Error
The File Replication Service moved the preexisting files in %1 to %2.\r\n%n\r\n%nThe File Replication Service may delete the files in %2 at any time.\r\nFiles can be saved from deletion by copying them out of %2. Copying\r\nthe files into %1 may lead to n	System	13520	NtFrs	Warning
The File Replication Service cannot enable replication on the comptuer %1\r\nuntil a backup/restore application completes.\r\n%n\r\n%nA backup/restore application has set a registry key that\r\nprevents the File Replication Service from starting until the	System	13521	NtFrs	Error
The File Replication Service paused because the staging area is full.\r\nReplication will resume if staging space becomes available or if the\r\nstaging space limit is increased.\r\n%n\r\n%nThe current value of the staging space limit is %1 KB.\r\n%n\r\n%	System	13522	NtFrs	Warning
The File Replication Service paused because the size of a file exceeds the\r\nstaging space limit. Replication will resume only if the staging space limit\r\nis increased.\r\n%n\r\n%nThe staging space limit is %1 KB and the file size is %2 KB.\r\n%n\r\n%n	System	13523	ntfs	Warning
The File Replication Service is stopping on the computer %1 because\r\na universally unique ID (UUID) cannot be created.\r\n%n\r\n%nThe SDK function UuidCreate() returned the error "%2".\r\n%n\r\n%nThe problem may be the lack of an Ethernet address,\r\nto	System	13524	NtFrs	Error
The File Replication Service cannot find the DNS name for the computer %1\r\nbecause the "%2" attribute could not be read from the distinguished\r\nname "%3".\r\n%n\r\n%nThe File Replication Service will try using the name "%1" until the\r\ncomputer's DNS	System	13525	NtFrs	Warning
The File Replication Service cannot replicate %1 with the computer\r\n%2 because the computer's SID cannot be determined from the distinguished\r\nname "%3".\r\n%n\r\n%nThe File Replication Service will retry later.\r\n	System	13526	NtFrs	Error
The RPC binding failed in the Open function of the FileReplicaSet Object. The\r\ncounter data for this object will not be available. The FileReplicaSet object\r\ncontains the performance counters of the Replica sets whose files are being\r\nreplicated by	Application	13527	NTFRSPerf	Error
The RPC binding failed in the Open function of the FileReplicaConn Object. The\r\ncounter data for this object will not be available. The FileReplicaConn object\r\ncontains the performance counters of the connections over which files are being\r\nreplicat	System	13528	NtFrs	Error
The RPC call failed in the Open function of the FileReplicaSet Object. The\r\ncounter data for this object will not be available. The FileReplicaSet object\r\ncontains the performance counters of the Replica sets whose files are being\r\nreplicated by the	System	13529	NtFrs	Error
The RPC call failed in the Open function of the FileReplicaConn Object. The\r\ncounter data for this object will not be available. The FileReplicaConn object\r\ncontains the performance counters of the connections over which files are being\r\nreplicated	System	13530	NtFrs	Error
The RPC binding failed in the Collect function of the FileReplicaSet Object. The\r\ncounter data for this object will not be available till the binding succeeds.\r\nThe FileReplicaSet object contains the performance counters of the Replica sets\r\nwhose f	System	13531	NtFrs	Error
The RPC binding failed in the Collect function of the FileReplicaConn Object.\r\nThe counter data for this object will not be available till the binding\r\nsucceeds. The FileReplicaConn object contains the performance counters of the\r\nconnections over w	System	13532	NtFrs	Error
The RPC call failed in the Collect function of the FileReplicaSet Object. The\r\ncounter data for this object will not be available till the call succeeds. The\r\nFileReplicaSet object contains the performance counters of the Replica sets\r\nwhose files a	System	13533	NtFrs	Error
The RPC call failed in the Collect function of the FileReplicaConn Object. The\r\ncounter data for this object will not be available till the call succeeds. The\r\nFileReplicaConn object contains the performance counters of the connections over\r\nwhich f	System	13534	NtFrs	Error
The call to VirtualAlloc failed in the Open function of the FileReplicaSet\r\nObject. The counter data for this object will not be available. The\r\nFileReplicaSet object contains the performance counters of the Replica sets\r\nwhose files are being repli	System	13535	NtFrs	Error
The call to VirtualAlloc failed in the Open function of the FileReplicaConn\r\nObject. The counter data for this object will not be available. The\r\nFileReplicaConn object contains the performance counters of the connections over\r\nwhich files are being	System	13536	NtFrs	Error
The call to the Registry failed in the Open function of the FileReplicaSet\r\nObject. The counter data for this object will not be available. The\r\nFileReplicaSet object contains the performance counters of the Replica sets\r\nwhose files are being repli	System	13537	NtFrs	Error
The call to the Registry failed in the Open function of the FileReplicaConn\r\nObject. The counter data for this object will not be available. The\r\nFileReplicaConn object contains the performance counters of the connections over\r\nwhich files are being	System	13538	NtFrs	Error
The File Replication Service cannot replicate %1 because the\r\npathname of the replicated directory is not the fully qualified\r\npathname of an existing, accessible local directory.\r\n	System	13539	NtFrs	Error
The File Replication Service cannot replicate %1 because the pathname\r\nof the customer designated staging directory:\r\n%n    %2\r\n%n is not the fully qualified pathname of an existing, accessible local directory.\r\n	System	13540	NtFrs	Error
The File Replication Service cannot replicate %1 because it overlaps\r\nthe File Replication Service's logging pathname %2.\r\n	System	13541	NtFrs	Error
The File Replication Service cannot replicate %1 because it overlaps\r\nthe File Replication Service's working directory %2.\r\n	System	13542	NtFrs	Error
The File Replication Service cannot replicate %1 because it overlaps\r\nthe staging directory %2.\r\n	System	13543	NtFrs	Error
The File Replication Service cannot replicate %1 because it overlaps\r\nthe replicating directory %2.\r\n	System	13544	NtFrs	Error
The File Replication Service cannot replicate %1 because it overlaps\r\nthe staging directory %2 of the replicating directory %3.\r\n	System	13545	NtFrs	Error
The File Replication Service could not prepare the root directory\r\n%1 for replication.  This is likely due to a problem creating the\r\nroot directory or a problem removing preexisting files in the root\r\ndirectory.\r\n%n\r\n%nCheck that the path leadi	System	13546	NtFrs	Error
The File Replication Service detected an invalid parameter value in the\r\nregistry.  %1.\r\n%n\r\n%nThe expected registry key name is "%2".\r\n%nThe expected value name is "%3".\r\n%nThe expected registry data type is %4.\r\n%nThe allowed range for this	System	13547	NtFrs	Error
The File Replication Service is unable to replicate with its partner computer\r\nbecause the difference in clock times is outside the range of plus or minus\r\n%1 minutes.\r\n%n\r\n%nThe connection to the partner computer is:\r\n%n  "%2"\r\n%nThe detected	System	13548	NtFrs	Error
The File Replication Service is unable to replicate from a partner computer\r\nbecause the event time associated with the file to be replicated is too far\r\ninto the future.  It is %1 minutes greater than the current time.  This can\r\nhappen if the syst	System	13549	NtFrs	Error
The File Replication Service is unable to open the customer designated\r\nstaging directory for replica set %1.  The path used for the staging\r\ndirectory is,\r\n%n    "%2"\r\n%nThe customer designated root path for this replica set is:\r\n%n    "%3"\r\n	System	13550	NtFrs	Error
The File Replication Service is unable to open (or create) the pre-install\r\ndirectory under the customer designated replica tree directory for\r\nreplica set %1.  The path used for the pre-install\r\ndirectory is,\r\n%n    "%2"\r\n%nThe customer designa	System	13551	NtFrs	Error
The File Replication Service is unable to add this computer to the following replica set: %n    "%1" %n %nThis could be caused by a number of problems such as: %n  --  an invalid root path, %n  --  a missing directory, %n  --  a missing disk volume	System	13552	NtFrs	Error
The File Replication Service successfully added this computer to the following replica set: %n    "%1" %n %nInformation related to this event is shown below: %nComputer DNS name is "%2" %nReplica set member name is "%3" %nReplica set root path is "	System	13553	NtFrs	Information
The File Replication Service successfully added the connections shown below to the replica set: %n    "%1" %n %n    %2 %n    %3 %n    %4 %n    %5 %n    %6 %n    %7 %n    %8 %n    %9 %n %nMore information may appear in subsequent event log mes	System	13554	NtFrs	Information
The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on his computer until the following recovery steps are performed: %n %n Recovery Steps: %n %n [1] The error state may clear itself	System	13555	NtFrs	Error
The File Replication Service has detected what appears to be an attempt to change the root path for the following replica set: %n    "%1" %n %nThis is not allowed.  To perform this operation you must remove this member from the replica set and add th	System	13556	NtFrs	Error
The File Replication Service has detected a duplicate connection object between this computer "%6" and a computer named "%1". %nThis was detected for the following replica set: %n    "%2" %n %nThis is not allowed and replication will not occur betwee	System	13557	NtFrs	Error
The File Replication Service has detected a duplicate connection object between this computer "%7" and a computer named "%1". %nThis was detected for the following replica set: %n    "%2" %n %nThis is not allowed and replication will not occur betwee	System	13558	NtFrs	Error
QoS: The Packet Scheduler failed to register with the Generic Packet Classifier (msgpc.sys).\r\n	System	14000	Psched	Error
QoS: The Packet Scheduler was unable to allocate required resources for initialization.\r\n	System	14001	Psched	Error
QoS: The Packet Scheduler failed to register as a protocol with NDIS.\r\n	System	14002	Psched	Error
QoS: The Packet Scheduler failed to register as a miniport with NDIS.\r\n	System	14003	Psched	Error
QoS [Adapter %2]:%nThe BestEffortLimit value set in the registry exceeds the LinkSpeed. Defaulting to Unlimited BestEffort.\r\n	System	14100	Psched	Error
QoS [Adapter %2]:%nThe netcard driver failed the query for OID_GEN_MAXIMUM_FRAME_SIZE.\r\n	System	14101	Psched	Error
QoS [Adapter %2]:%nThe netcard driver failed the query for OID_GEN_MAXIMUM_TOTAL_SIZE.\r\n	System	14102	Psched	Error
QoS [Adapter %2]:%nThe netcard driver failed the query for OID_GEN_LINK_SPEED.\r\n	System	14103	Psched	Error
QoS [Adapter %2]:%nThe Packet Scheduler failed to bind to the netcard's miniport driver.\r\n	System	14104	Psched	Error
QoS [Adapter %2]:%nThe UpperBindings key is missing from the registry.\r\n	System	14105	Psched	Error
QoS [Adapter %2]:%nThe Packet Scheduler was unable to register with the NDISWAN Call Manager.\r\n	System	14106	Psched	Error
QoS [Adapter %2]:%nThe Packet Scheduler could not initialize the virtual miniport with NDIS.\r\n	System	14107	Psched	Error
QoS [Adapter %2]:%nThe Packet Scheduler could not obtain the adapter's friendly name from NDIS.\r\n	System	14108	Psched	Error
Qos [Adapter %2]:%nThe registry entry for BestEffortLimit is not supported over WAN links. Defaulting to Unlimited BestEffort mode.\r\n	System	14109	Psched	Error
QoS [Adapter %2]:%nCould not initialize due to insufficient nonpaged pool memory.\r\n	System	14110	Psched	Error
QoS [Adapter %2]:%nTotal bandwidth allocated to flows exceeds the NonBestEffortLimit. This is because of a reduction in the LinkSpeed or because of a change to the NonBestEffortLimit registry key.\r\n	System	14111	Psched	Error
QoS [Adapter %2]:%nCould not allocate non paged pool memory for storing Network Addresses.\r\n	System	14112	Psched	Error
An extra ExitPoint %2 was found at server %3\r\n	System	14300	dac960nt	Error
The ExitPoint %2 was missing at server %3\r\n	System	14301	DfsServer	Error
The Volume %2 was missing at server %3\r\n	System	14302	DfsServer	Error
The extra Volume %2 was found at server %3\r\n	System	14303	DfsServer	Error
The extra ExitPoint %2 was deleted successfully from the server %3\r\n	System	14304	DfsServer	Error
Unable to delete the extra ExitPoint %2 at the server %3\r\n	System	14305	DfsServer	Error
The missing ExitPoint %2 was created at the server %3 successfully\r\n	System	14306	DfsServer	Error
Unable to create the missing Exit Point %2 at the server %3\r\n	System	14307	DfsServer	Error
Successfully created the missing volume %2 knowledge at the server %3\r\n	System	14308	DfsServer	Error
Unable to create the missing Volume %2 info at server %3\r\n	System	14309	DfsServer	Error
The extra Volume %2 info was deleted at server %3\r\n	System	14310	DfsServer	Error
The extra Volume %2 info was not deleted at server %3\r\n	System	14311	DfsServer	Error
Since the DC %2 was unavailable could not verify volumes knowledge.\r\n	System	14312	DfsServer	Error
Detected Knowledge inconsistency with the volume %2 at server %3\r\n	System	14313	DfsServer	Error
The local Prefix %2 was represented as %3 at remote server %4\r\n	System	14314	DfsServer	Error
The remote Prefix %3 was corrected to %2 at remote server %4\r\n	System	14315	DfsServer	Error
The remote Prefix %3 was NOT corrected to %2 at remote server %4\r\n	System	14316	DfsServer	Error
The machine %2 has become unlinked from the domain. Re-join the machine the machine to this domain.\r\n	System	14317	DfsServer	Error
Dfs received a referral request for "%2".  The return code is in the data.\r\n	System	14318	DfsServer	Information
The path "%2" is not a dfs path\r\n	System	14400	DfsClient	Information
Dfs was unable to open the Lan Redir\r\n	System	14401	DfsClient	Information
Dfs was unable to open a connection to server %2.  The error returned is in the record data.\r\n	System	14402	DfsClient	Information
Dfs was unable to obtain a referral for "%2" from %3.  The error returned is in the record data.\r\n	System	14403	DfsClient	Information
Dfs obtained a referral for "%2" from %3\r\n	System	14404	DfsClient	Information
Dfs reached its limit of attempts of resolution of "%2".\r\n	System	14405	DfsClient	Information
Dfs was unable to obtain the special referral table from %2.  The error returned is in the record data.\r\n	System	14406	DfsClient	Information
Dfs failed on open of %2 directed to %3.  The error returned is in the record data.\r\n	System	14407	DfsClient	Information
NetrDfsEnum received an enumeration.  The return code is in the record data.\r\n	System	14500	DfsSvc	Information
NetrDfsEnumEx received an enumeration.  The return code is in the record data.\r\n	System	14501	DfsSvc	Information
The account %1 could not be upgraded since there is an account with an\r\nequivalent name.\r\n	System	16384	SAM	Error
Not implemented\r\n	Application	16385	COM+	Error
An error occurred upgrading user %1.  This account will have to added\r\nmanually upon reboot.\r\n	System	16385	SAM	Error
No such interface supported\r\n	Application	16386	COM+	Error
An error occurred trying to read a user object from the old database.\r\n	System	16386	SAM	Error
Invalid pointer\r\n	Application	16387	COM+	Error
An error occurred upgrading alias %1. This account will have to added\r\nmanually upon reboot.\r\n	System	16387	SAM	Error
Operation aborted\r\n	Application	16388	COM+	Error
An error occurred trying to read an alias object from the old database.\r\n	System	16388	SAM	Error
Unspecified error\r\n	Application	16389	COM+	Error
An error occurred upgrading group %1. This account will have to added\r\nmanually upon reboot.\r\n	System	16389	SAM	Error
Thread local storage failure\r\n	Application	16390	COM+	Error
An error occurred trying to read a group object from the old database.\r\n	System	16390	SAM	Error
Get shared memory allocator failure\r\n	Application	16391	COM+	Error
An error occurred trying to add account %1 to alias %2.  This account will have\r\nto added manually upon reboot.\r\n	System	16391	SAM	Error
Get memory allocator failure\r\n	Application	16392	COM+	Error
The account with the sid %1 could not be added to group %2.\r\n	System	16392	SAM	Error
Unable to initialize class cache\r\n	Application	16393	COM+	Error
An error occurred trying to add account %1 to group %2.  This account will have\r\nto added manually upon reboot.\r\n	System	16393	SAM	Error
Unable to initialize RPC services\r\n	Application	16394	COM+	Error
The account with the rid %1 could not be added to group %2.\r\n	System	16394	SAM	Error
Cannot set thread local storage channel control\r\n	Application	16395	COM+	Error
A fatal error occurred trying to transfer the SAM account database into the\r\ndirectory service. A possible reason is the SAM account database is corrupt.\r\n	System	16395	SAM	Error
Could not allocate thread local storage channel control\r\n	Application	16396	COM+	Error
The account krbtgt was renamed to %1 to allow the Kerberos security package to install.\r\n	System	16396	SAM	Error
The user supplied memory allocator is unacceptable\r\n	Application	16397	COM+	Error
Setting the administrator's password to the string you specified failed.\r\nUpon reboot the password will be blank; please reset once logged on.\r\n	System	16397	SAM	Error
The OLE service mutex already exists\r\n	Application	16398	COM+	Error
An error occurred trying to upgrade a SAM user's User_Parameters \r\nattribute. The following Notification Package DLL might be the possible \r\noffender: %1. Check the record data of this event for the NT error code.\r\n	System	16398	SAM	Error
The OLE service file mapping already exists\r\n	Application	16399	COM+	Error
An error occured trying to set User Parameters attribute for this user \r\nThis operation is failed. Check the record data of this event for the NT\r\nerror code.        \r\n	System	16399	SAM	Error
Unable to map view of file for OLE service\r\n	Application	16400	COM+	Error
An error occured trying to upgrade the following SAM User Object - %1.\r\nWe will try to continue upgrading this user. But it might contain inconsistant data. \r\nCheck the record data of this event for the NT error code.\r\n	System	16400	SAM	Error
Failure attempting to launch OLE service\r\n	Application	16401	COM+	Error
An error occurred when trying to add the account %1 to the group %2.  \r\nThe problem, "%3", occurred when trying to open the group. Please add the member manually.\r\n	System	16401	SAM	Error
There was an attempt to call CoInitialize a second time while single threaded\r\n	Application	16402	COM+	Error
An error occurred when trying to add the account %1 to the group %2. \r\nThe problem, "%3", occurred when trying to add the account to the group.  Please add the member manually.\r\n	System	16402	SAM	Error
A Remote activation was necessary but was not allowed\r\n	Application	16403	COM+	Error
The error "%2" occurred when trying to create the well known account %1. Please contact PSS to\r\nrecover.\r\n	System	16403	SAM	Error
A Remote activation was necessary but the server name provided was invalid\r\n	Application	16404	COM+	Error
The Security Accounts Manager failed to add the Enterprise Admins group to the local Administrators alias.\r\nTo ensure proper functioning of the domain, please add the member manually.\r\n	System	16404	SAM	Error
The class is configured to run as a security id different from the caller\r\n	Application	16405	COM+	Error
During the installation of the Directory Service, this server's machine account was deleted hence preventing this Domain Controller from starting up.	System	16405	SAM	Error
Use of Ole1 services requiring DDE windows is disabled\r\n	Application	16406	COM+	Error
A RunAs specification must be <domain name>\\<user name> or simply <user name>\r\n	Application	16407	COM+	Error
The server process could not be started.  The pathname may be incorrect.\r\n	Application	16408	COM+	Error
The server process could not be started as the configured identity.  The pathname may be incorrect or unavailable.\r\n	Application	16409	COM+	Error
The server process could not be started because the configured identity is incorrect.  Check the username and password.\r\n	Application	16410	COM+	Error
The client is not allowed to launch this server.\r\n	Application	16411	COM+	Error
The service providing this server could not be started.\r\n	Application	16412	COM+	Error
This computer was unable to communicate with the computer providing the server.\r\n	Application	16413	COM+	Error
The server did not respond after being launched.\r\n	Application	16414	COM+	Error
The registration information for this server is inconsistent or incomplete.\r\n	Application	16415	COM+	Error
The registration information for this interface is inconsistent or incomplete.\r\n	Application	16416	COM+	Error
The operation attempted is not supported.\r\n	Application	16417	COM+	Error
A dll must be loaded.\r\n	Application	16418	COM+	Error
A Microsoft Software Installer error was encountered.\r\n	Application	16419	COM+	Error
The specified activation could not occur in the client context as specified.\r\n	Application	16420	COM+	Error
The account-identifier allocator finished initializing. The allocator was\r\ninitialized with the following identifier values: %1 %2 %3 %4 %5 %6 %7 %8.\r\nCheck the record data of this event for the initialization status. Zero\r\nindicates successful init	System	16640	SAM	Error
The account-identifier pool for this domain controller could not be updated.\r\nA possible reason for this is that the domain controller may be too busy with\r\nother update operations. Subsequent account creations will attempt to update\r\nthe ID pool un	System	16641	SAM	Error
The account-identifier allocator was unable to assign a new identifier. The\r\nidentifier pool for this domain controller may have been depleted. If this\r\nproblem persists, restart the domain controller and view the initialization\r\nstatus of the alloc	System	16642	SAM	Error
An initial account-identifier pool has not yet been allocated to this domain\r\ncontroller. A possible reason for this is that the domain controller has been\r\nunable to contact the master domain controller, possibly due to connectivity\r\nor network pro	System	16643	SAM	Error
The maximum domain account identifier value has been reached. No further\r\naccount-identifier pools can be allocated to domain controllers in this\r\ndomain.\r\n	System	16644	SAM	Error
The maximum account identifier allocated to this domain controller has been\r\nassigned. The domain controller has failed to obtain a new identifier pool.\r\nA possible reason for this is that the domain controller has been unable to\r\ncontact the master	System	16645	SAM	Error
The computed account identifier is invalid because it is out of the range of\r\nthe current account-identifier pool belonging to this domain controller. %1.\r\nTry invalidating the account identifier pool owned by this domain controller.\r\nThis will make	System	16646	SAM	Error
The domain controller is starting a request for a new account-identifier pool.\r\n	System	16647	SAM	Error
The request for a new account-identifier pool has completed successfully.\r\n	System	16648	SAM	Error
The account-identifier-manager object creation completed. If the record data\r\nfor this event has the value zero, the manager object was created. Otherwise,\r\nthe record data will contain the NT error code indicating the failure. The\r\nfailure to creat	System	16649	SAM	Error
The account-identifier allocator failed to initialize properly.  The record data\r\ncontains the NT error code that caused the failure.  Windows 2000 will retry the\r\ninitialization until it succeeds; until that time, account creation will be\r\ndenied o	System	16650	SAM	Error
The request for a new account-identifier pool failed because %1. Windows 2000 \r\nwill retry the request until it succeeds. \r\n	System	16651	SAM	Error
Security Enabled Local Group Changed to Security Enabled Universal Group.\r\n	System	16896	SAM	Error
Security Enabled Local Group Changed to Security Disabled Local Group.\r\n	System	16897	SAM	Error
Security Enabled Local Group Changed to Security Disabled Universal Group.\r\n	System	16898	SAM	Error
Security Enabled Global Group Changed to Security Enabled Universal Group.\r\n	System	16899	SAM	Error
Security Enabled Global Group Changed to Security Disabled Global Group.\r\n	System	16900	SAM	Error
Security Enabled Global Group Changed to Security Disabled Universal Group.\r\n	System	16901	SAM	Error
Security Enabled Universal Group Changed to Security Enabled Local Group.\r\n	System	16902	SAM	Error
Security Enabled Universal Group Changed to Security Enabled Global Group.\r\n	System	16903	SAM	Error
Security Enabled Universal Group Changed to Security Disabled Local Group.\r\n	System	16904	SAM	Error
Security Enabled Universal Group Changed to Security Disbled Global Group.\r\n	System	16905	SAM	Error
Security Enabled Universal Group Changed to Security Disabled Universal Group.\r\n	System	16906	SAM	Error
Security Disabled Local Group Changed to Security Enabled Local Group.\r\n	System	16907	SAM	Error
Security Disabled Local Group Changed to Security Enabled Universal Group.\r\n	System	16908	SAM	Error
Security Disabled Local Group Changed to Security Disabled Universal Group.\r\n	System	16909	SAM	Error
Security Disabled Global Group Changed to Security Enabled Global Group.\r\n	System	16910	SAM	Error
Security Disabled Global Group Changed to Security Enabled Universal Group.\r\n	System	16911	SAM	Error
Security Disabled Global Group Changed to Security Disabled Universal Group.\r\n	System	16912	SAM	Error
Security Disabled Universal Group Changed to Security Enabled Universal Group.\r\n	System	16913	SAM	Error
Security Disabled Universal Group Changed to Security Enabled Global Group.\r\n	System	16914	SAM	Error
Security Disabled Universal Group Changed to Security Enabled Universal Group.\r\n	System	16915	SAM	Error
Security Disabled Universal Group Changed to Security Disabled Local Group.\r\n	System	16916	SAM	Error
Security Disabled Universal Group Changed to Security Disabled Global Group.\r\n	System	16917	SAM	Error
Member Account Name Is Not Available.\r\n	System	16918	SAM	Error
Account Enabled.  \r\n	System	16919	SAM	Error
Account Disabled.  \r\n	System	16920	SAM	Error
Account Locked.  \r\n	System	16921	SAM	Error
Account Unlocked.  \r\n	System	16922	SAM	Error
Account Name Changed.  \r\n	System	16923	SAM	Error
Password Policy	System	16924	SAM	Error
Logoff Policy	System	16925	SAM	Error
Oem Information	System	16926	SAM	Error
Replication Information	System	16927	SAM	Error
Domain Server Role	System	16928	SAM	Error
Domain Server State	System	16929	SAM	Error
Lockout Policy	System	16930	SAM	Error
Modified Count	System	16931	SAM	Error
The DHCP server initialization parameters are incorrect.\r\n	System	20000	DHCP	Error
The DHCP server was unable to open the DHCP client database.\r\n	System	20001	DHCP	Error
The primary host information for the specified subnet was not found.\r\n	System	20007	DHCP	Error
The specified option already exists.\r\n	System	20009	DHCP	Error
The specified option does not exist.\r\n	System	20010	DHCP	Error
The specified address is not available.\r\n	System	20011	DHCP	Error
The specified IP address range is full.\r\n	System	20012	DHCP	Error
An error occurred while accessing the DHCP database. Look at the\r\nDHCP server event log for more information on this error.\r\n	System	20013	DHCP	Error
The specified client already exists in the database.\r\n	System	20014	DHCP	Error
The DHCP server received a message that is not valid.\r\n	System	20015	DHCP	Error
The DHCP server received a message from a client that is not valid.\r\n	System	20016	DHCP	Error
The DHCP server service is paused.\r\n	System	20017	DHCP	Information
The specified DHCP client is not a reserved client.\r\n	System	20018	DHCP	Error
The specified DHCP client is a reserved client.\r\n	System	20019	DHCP	Error
The specified IP address range is too small.\r\n	System	20020	DHCP	Error
The specified IP address range already exists.\r\n	System	20021	DHCP	Error
The specified IP address is being used by another client.\r\n	System	20022	DHCP	Error
The specified range either overlaps an existing range or is\r\nnot valid.\r\n	System	20023	DHCP	Error
The specified range is an extension of an existing range.\r\n	System	20024	DHCP	Error
The range extension specified is too small.  The range must be\r\nextended by multiples of 32 addresses.\r\n	System	20025	DHCP	Error
The range was extended less than the specified backward extension.\r\nExtend the range by multiples of 32 addresses.\r\n	System	20026	DHCP	Error
DHCP database needs to be upgraded to a newer format.  Look at the\r\nDHCP server event log for more information.\r\n	System	20027	DHCP	Warning
The format of the bootstrap protocol file table is incorrect.  \r\nThe correct format is:\r\n<requested boot file name1>,<boot file server name1>,<boot file name1>\r\n<requested boot file name2>,<boot file server name2>,<boot file name2>\r\netc...\r\n	System	20028	DHCP	Error
ERROR_SERVER_UNKNOWN_BOOT_FILE_NAME\r\n	System	20029	DHCP	Error
The specified superscope name is too long.\r\n	System	20030	DHCP	Error
This IP address is already in use.\r\n	System	20032	DHCP	Error
The DHCP audit-log file path is too long.\r\n	System	20033	DHCP	Error
The DHCP service received a request for a valid IP address \r\nthat is not administered by this server.\r\n	System	20034	DHCP	Error
The DHCP Server failed to receive a notification of interface \r\nlist changes.  Some of the interfaces will not be enabled in\r\nthe DHCP service.\r\n	System	20035	DHCP	Error
The DHCP database needs to be upgraded to the current Jet format.  \r\nLook at the DHCP service event log for more information.\r\n	System	20036	DHCP	Warning
The DHCP Server is not servicing any clients on the network \r\nbecause it could not determine if it is authorized to run.  \r\nThis might be due to network problems or insufficient resources.\r\n	System	20037	DHCP	Error
The DHCP service is shutting down because another DHCP server \r\nwith the IP address %1 is active on the network.\r\n	System	20038	DHCP	Error
The DHCP service is not servicing any clients on the network \r\nbecause it has determined that it is not authorized to run.\r\n	System	20039	DHCP	Error
The DHCP service is unable to contact the directory service \r\nfor domain %1.  The DHCP service will continue to attempt \r\nto contact the directory service.  During this time, no clients \r\non the network will be serviced.\r\n	System	20040	DHCP	Error
The DHCP service is not servicing any clients on the network \r\nbecause its authorization information conflicts with another \r\nDHCP server whose IP address is %1 and is active on domain %2.\r\n	System	20041	DHCP	Error
The DHCP service is ignoring a request from another DHCP \r\nservice because it is on a different directory service \r\nenterprise (Directory Service Enterprise root = %1)\r\n	System	20042	DHCP	Error
The DHCP service has detected a directory service environment\r\non the network.  If there is directory service on the network, \r\nDHCP service can only run on a server which is part of the directory\r\nservice.  Since this server belongs to a workgroup,	System	20043	DHCP	Error
The class name being used is unknown or inconrrect.\r\n	System	20044	DHCP	Error
The class name is already in use or the class information \r\nis already in use.\r\n	System	20045	DHCP	Error
The specified scope name is too long.  The name is limited to\r\na maximum of 256 characters.\r\n	System	20046	DHCP	Error
There is already a default scope configured on the server.\r\n	System	20047	DHCP	Error
The Dynamic BOOTP attribute cannot be turned on or off.\r\n	System	20048	DHCP	Error
The Dynamic BOOTP attribute cannot be turned on or off.\r\n	System	20048	DHCP	Error
Conversion of a scope to a DHCP Only scope or to a BOOTP Only scope \r\nis not allowed when DHCP and BOOTP clients both exist in the scope.\r\nManually delete either the DHCP or the BOOTP clients from the scope,\r\nas appropriate for the type of scope bei	System	20049	DHCP	Error
Conversion of a scope to a DHCP Only scope or to a BOOTP Only scope \r\nis not allowed when DHCP and BOOTP clients both exist in the scope.\r\nManually delete either the DHCP or the BOOTP clients from the scope,\r\nas appropriate for the type of scope bei	System	20049	DHCP	Error
The DHCP service could not contact Active Directory.\r\n	System	20070	DHCP	Error
The DHCP service root could not be found in the Active Directory.\r\n	System	20071	DHCP	Error
An unexpected error occurred while accessing the Active Directory.\r\n\r\n	System	20072	DHCP	Error
There were too many errors to proceed.\r\n	System	20073	DHCP	Error
A DHCP service could not be found.\r\n	System	20074	DHCP	Error
The specified options are already present in the directory service.\r\n	System	20075	DHCP	Error
The specified options are not present in the directory service.\r\n	System	20076	DHCP	Error
The specified classes already exist in the directory service.\r\n	System	20077	DHCP	Error
The specified classes do not exist in the directory service.\r\n	System	20078	DHCP	Error
The specified servers are already present in the directory service.\r\n	System	20079	DHCP	Error
The specified servers are not present in the directory service.\r\n	System	20080	DHCP	Error
The specified server address does not belong to the identified \r\nserver name.\r\n	System	20081	DHCP	Error
The specified subnets already exist in the directory service.\r\n	System	20082	DHCP	Error
The specified subnet belongs to a different superscope.\r\n	System	20083	DHCP	Error
The specified subnet is not present in the directory service.\r\n	System	20084	DHCP	Error
The specified subnet is not present in the directory service.\r\n	System	20084	DHCP	Error
The specified reservation is not present in the directory service.\r\n	System	20085	DHCP	Error
The specified reservation is not present in the directory service.\r\n	System	20085	DHCP	Error
The reservation specified conflicts with an existing reservation\r\nin the directory service.\r\n	System	20086	DHCP	Error
The reservation specified conflicts with an existing reservation\r\nin the directory service.\r\n	System	20086	DHCP	Error
The specified IP range conflicts with some existing IP range in the\r\ndirectory service.\r\n	System	20087	DHCP	Error
The specified IP range conflicts with some existing IP range in the\r\ndirectory service.\r\n	System	20087	DHCP	Error
The specified IP range is not present in the directory service.\r\n	System	20088	DHCP	Error
The specified IP range is not present in the directory service.\r\n	System	20088	DHCP	Error
Failed to apply IP Security on port %1 because of error: %2. \r\nNo calls will be accepted to this port.\r\n	System	20171	RemoteAccess	Warning
Interface %1 is unreachable because it is not currently connected to the network.\r\n	System	20184	RemoteAccess	Information
Interface %1 is now reachable.\r\n	System	20186	RemoteAccess	Information
Interface %1 is now reachable.\r\n	System	20186	RemoteAccess	Information
An invalid Active Directory pathname was passed\r\n	System	20480	Active Directory	Error
An unknown Active Directory domain object was requested\r\n	System	20481	Active Directory	Error
An unknown Active Directory user object was requested\r\n	System	20482	Active Directory	Error
An unknown Active Directory computer object was requested\r\n	System	20483	Active Directory	Error
An unknown Active Directory object was requested\r\n	System	20484	Active Directory	Error
The specified Active Directory property was not set\r\n	System	20485	Active Directory	Error
The specified Active Directory property is not supported\r\n	System	20486	Active Directory	Error
The specified Active Directory property is invalid\r\n	System	20487	Active Directory	Error
One or more input parameters are invalid\r\n	System	20488	Active Directory	Error
The specified Active Directory object is not bound to a remote resource\r\n	System	20489	Active Directory	Error
The specified Active Directory object has not been modified\r\n	System	20490	Active Directory	Error
The specified Active Directory object has not been modified\r\n	System	20491	Active Directory	Information
The Active Directory datatype cannot be converted to/from a native DS datatype\r\n	System	20492	Active Directory	Error
The Active Directory property cannot be found in the cache.\r\n	System	20493	Active Directory	Error
The Active Directory object exists.\r\n	System	20494	Active Directory	Error
The attempted action violates the DS schema rules.\r\n	System	20495	Active Directory	Error
The specified column in the Active Directory was not set.\r\n	System	20496	Active Directory	Error
One or more errors occurred\r\n	System	20497	Active Directory	Error
No more rows to be obatained by the search result.\r\n	System	20498	Active Directory	Information
No more columns to be obatained for the current row.\r\n	System	20499	Active Directory	Error
The search filter specified is invalid\r\n	System	20500	Active Directory	Error
IPRIP was unable to create an event for synchronization.\r\nPlease try freeing some system resources.\r\n	System	29006	IPRip	Error
IPRIP was unable to add a route to the system route table.\r\nThe data is the error code.\r\n	System	29031	IPRip	Error
MetaData has not been initialized.\r\n	System	51200	COMPLUS	Error
The specified metadata was not found.\r\n	System	51201	COMPLUS	Error
The version specified in metadata storage was not recognized.\r\n	System	51202	COMPLUS	Error
A specified metaobject path was not found. The metaobject and associated metadata was ignored.\r\n	System	51203	COMPLUS	Success
A metaobject or metadata was specified more than once. The duplicate ignored.\r\n	System	51204	COMPLUS	Success
Invalid metadata was specified. The invalid metadata was ignored.\r\n	System	51205	COMPLUS	Success
A secure communications channel could not be established with the target server.\r\n	System	51206	COMPLUS	Error
The path was not inserted into the string as requested. The probable cause is that the data is at an object at a higher level than the handle.\r\n	System	51207	COMPLUS	Success
The METADATA_SECURE attribute cannot be removed from a data item via the GetData method. Use the DeleteData method to remove the secure data.\r\n	System	51208	COMPLUS	Error
The metadata save prior to backup failed. The previous version of the data was backed up.\r\n	System	51209	COMPLUS	Success
The schema information could not be loaded. A required key or property is missing from the metabase.\r\n	System	51216	COMPLUS	Error
Catastrophic failure\r\n	Application	65535	COM+	Error
Call was rejected by callee.\r\n	System	65537	RPC	Error
Call was canceled by the message filter.\r\n	System	65538	RPC	Error
The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage.\r\n	System	65539	RPC	Error
The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call.\r\n	System	65540	RPC	Error
It is illegal to call out while inside message filter.\r\n	System	65541	RPC	Error
The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid.\r\n	System	65542	RPC	Error
The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.\r\n	System	65543	RPC	Error
The caller (client) disappeared while the callee (server) was processing a call.\r\n	System	65544	RPC	Error
The data packet with the marshalled parameter data is incorrect.\r\n	System	65545	RPC	Error
The call was not transmitted properly; the message queue was full and was not emptied after yielding.\r\n	System	65546	RPC	Error
The client (caller) cannot marshall the parameter data - low memory, etc.\r\n	System	65547	RPC	Error
The client (caller) cannot unmarshall the return data - low memory, etc.\r\n	System	65548	RPC	Error
The server (callee) cannot marshall the return data - low memory, etc.\r\n	System	65549	RPC	Error
The server (callee) cannot unmarshall the parameter data - low memory, etc.\r\n	System	65550	RPC	Error
Received data is invalid; could be server or client data.\r\n	System	65551	RPC	Error
A particular parameter is invalid and cannot be (un)marshalled.\r\n	System	65552	RPC	Error
There is no second outgoing call on same channel in DDE conversation.\r\n	System	65553	RPC	Error
The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute.\r\n	System	65554	RPC	Error
System call failed.\r\n	System	65792	RPC	Error
Could not allocate some required resource (memory, events, ...)\r\n	System	65793	RPC	Error
Attempted to make calls on more than one thread in single threaded mode.\r\n	System	65794	RPC	Error
The requested interface is not registered on the server object.\r\n	System	65795	RPC	Error
RPC could not call the server or could not return the results of calling the server.\r\n	System	65796	RPC	Error
The server threw an exception.\r\n	System	65797	RPC	Error
Cannot change thread mode after it is set.\r\n	System	65798	RPC	Error
The method called does not exist on the server.\r\n	System	65799	RPC	Error
The object invoked has disconnected from its clients.\r\n	System	65800	RPC	Error
The object invoked chose not to process the call now.  Try again later.\r\n	System	65801	RPC	Error
The message filter indicated that the application is busy.\r\n	System	65802	RPC	Error
The message filter rejected the call.\r\n	System	65803	RPC	Error
A call control interfaces was called with invalid data.\r\n	System	65804	RPC	Error
An outgoing call cannot be made since the application is dispatching an input-synchronous call.\r\n	System	65805	RPC	Error
The application called an interface that was marshalled for a different thread.\r\n	System	65806	RPC	Error
CoInitialize has not been called on the current thread.\r\n	System	65807	RPC	Error
The version of OLE on the client and server machines does not match.\r\n	System	65808	RPC	Error
OLE received a packet with an invalid header.\r\n	System	65809	RPC	Error
OLE received a packet with an invalid extension.\r\n	System	65810	RPC	Error
The requested object or interface does not exist.\r\n	System	65811	RPC	Error
The requested object does not exist.\r\n	System	65812	RPC	Error
OLE has sent a request and is waiting for a reply.\r\n	System	65813	RPC	Error
OLE is waiting before retrying a request.\r\n	System	65814	RPC	Error
Call context cannot be accessed after call completed.\r\n	System	65815	RPC	Error
Impersonate on unsecure calls is not supported.\r\n	System	65816	RPC	Error
Security must be initialized before any interfaces are marshalled or unmarshalled. It cannot be changed once initialized.\r\n	System	65817	RPC	Error
No security packages are installed on this machine or the user is not logged on or there are no compatible security packages between the client and server.\r\n	System	65818	RPC	Error
Access is denied.\r\n	System	65819	RPC	Error
Remote calls are not allowed for this process.\r\n	System	65820	RPC	Error
The marshaled interface data packet (OBJREF) has an invalid or unknown format.\r\n	System	65821	RPC	Error
No context is associated with this call. This happens for some custom marshalled calls and on the client side of the call.\r\n	System	65822	RPC	Error
This operation returned because the timeout period expired.\r\n	System	65823	RPC	Error
There are no synchronize objects to wait on.\r\n	System	65824	RPC	Error
Full subject issuer chain SSL principal name expected from the server.\r\n	System	65825	RPC	Error
Principal name is not a valid MSSTD name.\r\n	System	65826	RPC	Error
Unable to impersonate DCOM client\r\n	System	65827	Kernel	Error
Unable to obtain server's security context\r\n	System	65828	Kernel	Error
Unable to open the access token of the current thread\r\n	System	65829	Kernel	Error
Unable to obtain user info from an access token\r\n	System	65830	Kernel	Error
The client who called IAccessControl::IsAccessPermitted was not the trustee provided to the method\r\n	System	65831	Kernel	Error
Unable to obtain the client's security blanket\r\n	System	65832	Kernel	Error
Unable to set a discretionary ACL into a security descriptor\r\n	System	65833	Kernel	Error
The system function, AccessCheck, returned false\r\n	System	65834	Kernel	Error
Either NetAccessDel or NetAccessAdd returned an error code.\r\n	System	65835	Kernel	Error
One of the trustee strings provided by the user did not conform to the <Domain>\\<Name> syntax and it was not the "*" string\r\n	System	65836	Kernel	Error
One of the security identifiers provided by the user was invalid\r\n	System	65837	Kernel	Error
Unable to convert a wide character trustee string to a multibyte trustee string\r\n	System	65838	Kernel	Error
Unable to find a security identifier that corresponds to a trustee string provided by the user\r\n	System	65839	Kernel	Error
The system function, LookupAccountSID, failed\r\n	System	65840	Kernel	Error
Unable to find a trustee name that corresponds to a security identifier provided by the user\r\n	System	65841	Kernel	Error
The system function, LookupAccountName, failed\r\n	System	65842	Kernel	Error
Unable to set or reset a serialization handle\r\n	System	65843	Kernel	Error
Unable to obtain the Windows directory\r\n	System	65844	Kernel	Error
Path too long\r\n	System	65845	Kernel	Error
Unable to generate a uuid.\r\n	System	65846	Kernel	Error
Unable to create file\r\n	System	65847	Kernel	Error
Unable to close a serialization handle or a file handle.\r\n	System	65848	Kernel	Error
The number of ACEs in an ACL exceeds the system limit.\r\n	System	65849	Kernel	Error
Not all the DENY_ACCESS ACEs are arranged in front of the GRANT_ACCESS ACEs in the stream.\r\n	System	65850	Kernel	Error
The version of ACL format in the stream is not supported by this implementation of IAccessControl\r\n	System	65851	Kernel	Error
Unable to open the access token of the server process\r\n	System	65852	Kernel	Error
Unable to decode the ACL in the stream provided by the user\r\n	System	65853	Kernel	Error
The COM IAccessControl object is not initialized\r\n	System	65855	Kernel	Error
Call Cancellation is disabled\r\n	System	65856	Kernel	Error
An internal error occurred.\r\n	System	131071	RPC	Error
Unknown interface.\r\n	System	131073	Kernel	Error
Member not found.\r\n	System	131075	Kernel	Error
Parameter not found.\r\n	System	131076	Kernel	Error
Type mismatch.\r\n	System	131077	Kernel	Error
Unknown name.\r\n	System	131078	Kernel	Error
No named arguments.\r\n	System	131079	Kernel	Error
Bad variable type.\r\n	System	131080	Kernel	Error
Exception occurred.\r\n	System	131081	Kernel	Error
Out of present range.\r\n	System	131082	Kernel	Error
Invalid index.\r\n	System	131083	Kernel	Error
Unknown language.\r\n	System	131084	Kernel	Error
Memory is locked.\r\n	System	131085	Kernel	Error
Invalid number of parameters.\r\n	System	131086	Kernel	Error
Parameter not optional.\r\n	System	131087	Kernel	Error
Invalid callee.\r\n	System	131088	Kernel	Error
Does not support a collection.\r\n	System	131089	Kernel	Error
Division by zero.\r\n	System	131090	Kernel	Error
Buffer too small\r\n	System	131091	Kernel	Error
Buffer too small.\r\n	System	163862	Kernel	Error
Field name not defined in the record.\r\n	System	163863	Kernel	Error
Old format or invalid type library.\r\n	System	163864	Kernel	Error
Old format or invalid type library.\r\n	System	163865	Kernel	Error
Error accessing the OLE registry.\r\n	System	163866	Kernel	Error
Library not registered.\r\n	System	163867	Kernel	Error
Bound to unknown type.\r\n	System	163868	Kernel	Error
Qualified name disallowed.\r\n	System	163869	Kernel	Error
Invalid forward reference, or reference to uncompiled type.\r\n	System	163881	Kernel	Error
Type mismatch.\r\n	System	163882	Kernel	Error
Element not found.\r\n	System	163883	Kernel	Error
Ambiguous name.\r\n	System	163884	Kernel	Error
Name already exists in the library.\r\n	System	163885	Kernel	Error
Unknown LCID.\r\n	System	163886	Kernel	Error
Function not defined in specified DLL.\r\n	System	163887	Kernel	Error
Wrong module kind for the operation.\r\n	System	166077	Kernel	Error
Size may not exceed 64K.\r\n	System	166085	Kernel	Error
Duplicate ID in inheritance hierarchy.\r\n	System	166086	Kernel	Error
Incorrect inheritance depth in standard OLE hmember.\r\n	System	166095	Kernel	Error
Type mismatch.\r\n	System	167072	Kernel	Error
Invalid number of arguments.\r\n	System	167073	Kernel	Error
I/O Error.\r\n	System	167074	Kernel	Error
Error creating unique tmp file.\r\n	System	167075	Kernel	Error
Error loading type library/DLL.\r\n	System	171082	Kernel	Error
Inconsistent property functions.\r\n	System	171139	Kernel	Error
Circular dependency between types/modules.\r\n	System	171140	Kernel	Error
Unable to perform requested operation.\r\n	System	196609	STG	Error
%1 could not be found.\r\n	System	196610	STG	Error
The path %1 could not be found.\r\n	System	196611	STG	Error
There are insufficient resources to open another file.\r\n	System	196612	STG	Error
Access Denied.\r\n	System	196613	STG	Error
Attempted an operation on an invalid object.\r\n	System	196614	STG	Error
There is insufficient memory available to complete operation.\r\n	System	196616	STG	Error
Invalid pointer error.\r\n	System	196617	STG	Error
There are no more entries to return.\r\n	System	196626	STG	Error
Disk is write-protected.\r\n	System	196627	STG	Error
An error occurred during a seek operation.\r\n	System	196633	STG	Error
A disk error occurred during a write operation.\r\n	System	196637	STG	Error
A disk error occurred during a read operation.\r\n	System	196638	STG	Error
A share violation has occurred.\r\n	System	196640	STG	Error
A lock violation has occurred.\r\n	System	196641	STG	Error
%1 already exists.\r\n	System	196688	STG	Error
Invalid parameter error.\r\n	System	196695	STG	Error
There is insufficient disk space to complete operation.\r\n	System	196720	STG	Error
Illegal write of non-simple property to simple property set.\r\n	System	196848	STG	Error
An API call exited abnormally.\r\n	System	196858	STG	Error
The file %1 is not a valid compound file.\r\n	System	196859	STG	Error
The name %1 is not valid.\r\n	System	196860	STG	Error
An unexpected error occurred.\r\n	System	196861	STG	Error
That function is not implemented.\r\n	System	196862	STG	Error
That function is not implemented.	System	196862	STG	Error
Invalid flag error.\r\n	System	196863	STG	Error
Attempted to use an object that is busy.\r\n	System	196864	STG	Error
The storage has been changed since the last commit.\r\n	System	196865	STG	Error
Attempted to use an object that has ceased to exist.\r\n	System	196866	STG	Error
Can't save.\r\n	System	196867	STG	Error
The compound file %1 was produced with an incompatible version of storage.\r\n	System	196868	STG	Error
The compound file %1 was produced with a newer version of storage.\r\n	System	196869	STG	Error
Share.exe or equivalent is required for operation.\r\n	System	196870	STG	Error
Illegal operation called on non-file based storage.\r\n	System	196871	STG	Error
Illegal operation called on object with extant marshallings.\r\n	System	196872	STG	Error
The docfile has been corrupted.\r\n	System	196873	STG	Error
OLE32.DLL has been loaded at the wrong address.\r\n	System	196880	STG	Error
The compound file is too large for the current implementation\r\n	System	196881	STG	Error
The compound file was not created with the STGM_SIMPLE flag\r\n	System	196882	STG	Error
The underlying file was converted to compound file format.\r\n	System	197120	STG	Error
The storage operation should block until more data is available.\r\n	System	197121	STG	Error
The file download was aborted abnormally.  The file is incomplete.\r\n	System	197121	STG	Error
The storage operation should retry immediately.\r\n	System	197122	STG	Error
The file download has been terminated.\r\n	System	197122	STG	Error
The notified event sink will not influence the storage operation.\r\n	System	197123	STG	Error
Multiple opens prevent consolidated. (commit succeeded).\r\n	System	197124	STG	Error
Consolidation of the storage file failed. (commit succeeded).\r\n	System	197125	STG	Error
Consolidation of the storage file is inappropriate. (commit succeeded).\r\n	System	197126	STG	Error
Software Management does not support this version of the PDF.	System	259153	OLE DB	Error
An internal error has occurred in Software Management.	System	259154	OLE DB	Error
Use the registry database to provide the requested information\r\n	System	262144	OLE	Error
Invalid OLEVERB structure\r\n	System	262144	OLE	Error
Success, but static\r\n	System	262145	OLE	Error
Invalid advise flags\r\n	System	262145	OLE	Error
Macintosh clipboard format\r\n	System	262146	OLE	Error
Can't enumerate any more, because the associated data is missing\r\n	System	262146	OLE	Error
This implementation doesn't take advises\r\n	System	262147	OLE	Error
There is no connection for this connection ID\r\n	System	262148	OLE	Error
Need to run the object to perform this operation\r\n	System	262149	OLE	Error
There is no cache to operate on\r\n	System	262150	OLE	Error
Uninitialized object\r\n	System	262151	OLE	Error
Linked object's source class has changed\r\n	System	262152	OLE	Error
Not able to get the moniker of the object\r\n	System	262153	OLE	Error
Not able to bind to the source\r\n	System	262154	OLE	Error
Object is static; operation not allowed\r\n	System	262155	OLE	Error
User canceled out of save dialog\r\n	System	262156	OLE	Error
Invalid rectangle\r\n	System	262157	OLE	Error
compobj.dll is too old for the ole2.dll initialized\r\n	System	262158	OLE	Error
Invalid window handle\r\n	System	262159	OLE	Error
Object is not in any of the inplace active states\r\n	System	262160	OLE	Error
Not able to convert object\r\n	System	262161	OLE	Error
Not able to perform the operation because object is not given storage yet\r\n	System	262162	OLE	Error
Invalid FORMATETC structure\r\n	System	262244	Kernel	Error
Invalid DVTARGETDEVICE structure\r\n	System	262245	Kernel	Error
Invalid STDGMEDIUM structure\r\n	System	262246	Kernel	Error
Invalid STATDATA structure\r\n	System	262247	Kernel	Error
Invalid lindex\r\n	System	262248	Kernel	Error
Invalid tymed\r\n	System	262249	Kernel	Error
Invalid clipboard format\r\n	System	262250	Kernel	Error
Invalid aspect(s)\r\n	System	262251	Kernel	Error
tdSize parameter of the DVTARGETDEVICE structure is invalid\r\n	System	262252	Kernel	Error
Object doesn't support IViewObject interface\r\n	System	262253	Kernel	Error
Successful drop took place\r\n	System	262400	Kernel	Error
Trying to revoke a drop target that has not been registered\r\n	System	262400	Kernel	Error
Drag-drop operation canceled\r\n	System	262401	Kernel	Error
This window has already been registered as a drop target\r\n	System	262401	Kernel	Error
Use the default cursor\r\n	System	262402	Kernel	Error
Invalid window handle\r\n	System	262402	Kernel	Error
Class does not support aggregation (or class object is remote)\r\n	System	262416	Kernel	Error
ClassFactory cannot supply requested class\r\n	System	262417	Kernel	Error
Class is not licensed for use\r\n	System	262418	Kernel	Error
Data has same FORMATETC\r\n	System	262448	Kernel	Error
View is already frozen\r\n	System	262464	Kernel	Error
Error drawing view\r\n	System	262464	Kernel	Error
Could not read key from registry\r\n	System	262480	Kernel	Error
Could not write key to registry\r\n	System	262481	Kernel	Error
Could not find the key in the registry\r\n	System	262482	Kernel	Error
Invalid value for registry\r\n	System	262483	Kernel	Error
Class not registered\r\n	System	262484	Kernel	Error
Interface not registered\r\n	System	262485	Kernel	Error
Threading model entry is not valid\r\n	System	262486	Kernel	Error
CATID does not exist\r\n	System	262496	Kernel	Error
Description not found\r\n	System	262497	Kernel	Error
No package in the software installation data in the Active Directory meets this criteria.\r\n	System	262500	Class Store	Error
Deleting this will break the referential integrity of the software installation data in the Active Directory.\r\n	System	262501	Class Store	Error
The CLSID was not found in the software installation data in the Active Directory.\r\n	System	262502	Class Store	Error
The software installation data in the Active Directory is corrupt.\r\n	System	262503	Class Store	Error
There is no software installation data in the Active Directory.\r\n	System	262504	Class Store	Error
There is no software installation data object in the Active Directory.\r\n	System	262505	Class Store	Error
The software installation data object in the Active Directory already exists.\r\n	System	262506	Class Store	Error
The path to the software installation data in the Active Directory is not correct.\r\n	System	262507	Class Store	Error
A network error interrupted the operation.\r\n	System	262508	Class Store	Error
The size of this object exceeds the maximum size set by the Administrator.\r\n	System	262509	Class Store	Error
The schema for the software installation data in the Active Directory does not match the required schema.\r\n	System	262510	Class Store	Error
An error occurred in the software installation data in the Active Directory.\r\n	System	262511	Class Store	Error
FORMATETC not supported\r\n	System	262512	Class Store	Error
Cache not updated\r\n	System	262512	Class Store	Error
Same cache\r\n	System	262513	Class Store	Error
Some cache(s) not updated\r\n	System	262514	Class Store	Error
Invalid verb for OLE object\r\n	System	262528	Class Store	Error
No verbs for OLE object\r\n	System	262528	Class Store	Error
Verb number is valid but verb cannot be done now\r\n	System	262529	Class Store	Error
Invalid verb for OLE object\r\n	System	262529	Class Store	Error
Invalid window handle passed\r\n	System	262530	Class Store	Error
Message is too long; some of it had to be truncated before displaying\r\n	System	262560	Class Store	Error
Undo is not available\r\n	System	262560	Class Store	Error
Space for tools is not available\r\n	System	262561	Class Store	Error
Unable to convert OLESTREAM to IStorage\r\n	System	262592	Class Store	Error
OLESTREAM Get method failed\r\n	System	262592	Class Store	Error
OLESTREAM Put method failed\r\n	System	262593	Class Store	Error
Contents of the OLESTREAM not in correct format\r\n	System	262594	Class Store	Error
There was an error in a Windows GDI call while converting the bitmap to a DIB\r\n	System	262595	Class Store	Error
Contents of the IStorage not in correct format\r\n	System	262596	Class Store	Error
Contents of IStorage is missing one of the standard streams\r\n	System	262597	Class Store	Error
There was an error in a Windows GDI call while converting the DIB to a bitmap.\r\n\r\n	System	262598	Class Store	Error
OpenClipboard Failed\r\n	System	262608	Class Store	Error
EmptyClipboard Failed\r\n	System	262609	Class Store	Error
SetClipboard Failed\r\n	System	262610	Class Store	Error
Data on clipboard is invalid\r\n	System	262611	Class Store	Error
CloseClipboard Failed\r\n	System	262612	Class Store	Error
Moniker needs to be connected manually\r\n	System	262624	Class Store	Error
Operation exceeded deadline\r\n	System	262625	Class Store	Error
Moniker reduced to itself\r\n	System	262626	Class Store	Error
Moniker needs to be generic\r\n	System	262626	Class Store	Error
Operation unavailable\r\n	System	262627	Class Store	Error
Common prefix is this moniker\r\n	System	262628	Class Store	Error
Invalid syntax\r\n	System	262628	Class Store	Error
Common prefix is input moniker\r\n	System	262629	Class Store	Error
No object for moniker\r\n	System	262629	Class Store	Error
Common prefix is both monikers\r\n	System	262630	Class Store	Error
Bad extension for file\r\n	System	262630	Class Store	Error
Moniker is already registered in running object table\r\n	System	262631	Class Store	Error
Intermediate operation failed\r\n	System	262631	Class Store	Error
Moniker is not bindable\r\n	System	262632	Class Store	Error
Moniker is not bound\r\n	System	262633	Class Store	Error
Moniker cannot open file\r\n	System	262634	Class Store	Error
User input required for operation to succeed\r\n	System	262635	Class Store	Error
Moniker class has no inverse\r\n	System	262636	Class Store	Error
Moniker does not refer to storage\r\n	System	262637	Class Store	Error
No common prefix\r\n	System	262638	Class Store	Error
Moniker could not be enumerated\r\n	System	262639	Class Store	Error
CoInitialize has not been called.\r\n	System	262640	Class Store	Error
CoInitialize has already been called.\r\n	System	262641	Class Store	Error
Class of object cannot be determined\r\n	System	262642	Class Store	Error
Invalid class string\r\n	System	262643	Class Store	Error
Invalid interface string\r\n	System	262644	Class Store	Error
Application not found\r\n	System	262645	Class Store	Error
Application cannot be run more than once\r\n	System	262646	Class Store	Error
Some error in application program\r\n	System	262647	Class Store	Error
DLL for class not found\r\n	System	262648	Class Store	Error
Error in the DLL\r\n	System	262649	Class Store	Error
Wrong OS or OS version for application\r\n	System	262650	Class Store	Error
Object is not registered\r\n	System	262651	Class Store	Error
Object is already registered\r\n	System	262652	Class Store	Error
Object is not connected to server\r\n	System	262653	Class Store	Error
Application was launched but it didn't register a class factory\r\n	System	262654	Class Store	Error
Object has been released\r\n	System	262655	Class Store	Error
An event was able to invoke some but not all of the subscribers\r\n	System	262656	Class Store	Error
An event was unable to invoke any of the subscribers\r\n	System	262657	Class Store	Error
An event was unable to invoke any of the subscribers	System	262657	Class Store	Error
An event was delivered but there were no subscribers\r\n	System	262658	Class Store	Error
A syntax error occurred trying to evaluate a query string\r\n	System	262659	Class Store	Error
An invalid field name was used in a query string\r\n	System	262660	Class Store	Error
An unexpected exception was raised\r\n	System	262661	Class Store	Error
An unexpected internal error was detected\r\n	System	262662	Class Store	Error
The owner SID on a per-user subscription doesn't exist\r\n	System	262663	Class Store	Error
A user-supplied component or subscriber raised an exception\r\n	System	262664	Class Store	Error
An interface has too many methods to fire events from\r\n	System	262665	Class Store	Error
A subscription cannot be stored unless its event class already exists\r\n	System	262666	Class Store	Error
Not all the objects requested could be removed\r\n	System	262667	Class Store	Error
COM+ is required for this operation, but is not installed\r\n	System	262668	Class Store	Error
Invalid accessor\r\n	System	265728	OLE DB	Error
Creating another row would have exceeded the total number of active\r\nrows supported by the rowset\r\n	System	265729	OLE DB	Error
Unable to write with a read-only accessor\r\n	System	265730	OLE DB	Error
Given values violate the database schema\r\n	System	265731	OLE DB	Error
Invalid row handle\r\n	System	265732	OLE DB	Error
An object was open\r\n	System	265733	OLE DB	Error
Invalid chapter\r\n	System	265734	OLE DB	Error
A literal value in the command could not be converted to the\r\ncorrect type due to a reason other than data overflow\r\n	System	265735	OLE DB	Error
Invalid binding info\r\n	System	265736	OLE DB	Error
Permission denied\r\n	System	265737	OLE DB	Error
Specified column does not contain bookmarks or chapters\r\n	System	265738	OLE DB	Error
Some cost limits were rejected\r\n	System	265739	OLE DB	Error
No command has been set for the command object\r\n	System	265740	OLE DB	Error
Unable to find a query plan within the given cost limit\r\n	System	265741	OLE DB	Error
Invalid bookmark\r\n	System	265742	OLE DB	Error
Invalid lock mode\r\n	System	265743	OLE DB	Error
No value given for one or more required parameters\r\n	System	265744	OLE DB	Error
Invalid column ID\r\n	System	265745	OLE DB	Error
Invalid ratio\r\n	System	265746	OLE DB	Error
Invalid value\r\n	System	265747	OLE DB	Error
The command contained one or more errors\r\n	System	265748	OLE DB	Error
The executing command cannot be canceled\r\n	System	265749	OLE DB	Error
The provider does not support the specified dialect\r\n	System	265750	OLE DB	Error
A data source with the specified name already exists\r\n	System	265751	OLE DB	Error
The rowset was built over a live data feed and cannot be restarted\r\n	System	265752	OLE DB	Error
No key matching the described characteristics could be found within\r\nthe current range\r\n	System	265753	OLE DB	Error
Ownership of this tree has been given to the provider\r\n	System	265754	OLE DB	Error
The provider is unable to determine identity for newly inserted\r\nrows\r\n	System	265755	OLE DB	Error
No nonzero weights specified for any goals supported, so goal was\r\nrejected; current goal was not changed\r\n	System	265756	OLE DB	Error
Requested conversion is not supported\r\n	System	265757	OLE DB	Error
lRowsOffset would position you past either end of the rowset,\r\nregardless of the cRows value specified; cRowsObtained is 0\r\n	System	265758	OLE DB	Error
Information was requested for a query, and the query was not set\r\n	System	265759	OLE DB	Error
Provider called a method from IRowsetNotify in the consumer and\tthe\r\nmethod has not yet returned\r\n	System	265760	OLE DB	Error
Errors occurred\r\n	System	265761	OLE DB	Error
A non-NULL controlling IUnknown was specified and the object being\r\ncreated does not support aggregation\r\n	System	265762	OLE DB	Error
A given HROW referred to a hard- or soft-deleted row\r\n	System	265763	OLE DB	Error
The rowset does not support fetching backwards\r\n	System	265764	OLE DB	Error
All HROWs must be released before new ones can be obtained\r\n	System	265765	OLE DB	Error
One of the specified storage flags was not supported\r\n	System	265766	OLE DB	Error
The comparison operator was invalid\r\n	System	265767	OLE DB	Error
The specified status flag was neither DBCOLUMNSTATUS_OK nor\r\nDBCOLUMNSTATUS_ISNULL\r\n	System	265768	OLE DB	Error
The rowset cannot scroll backwards\r\n	System	265769	OLE DB	Error
Invalid region handle\r\n	System	265770	OLE DB	Error
The specified set of rows was not contiguous to or overlapping the\r\nrows in the specified watch region\r\n	System	265771	OLE DB	Error
A transition from ALL* to MOVE* or EXTEND* was specified\r\n	System	265772	OLE DB	Error
The specified region is not a proper subregion of the region\r\nidentified by the given watch region handle\r\n	System	265773	OLE DB	Error
The provider does not support multi-statement commands\r\n	System	265774	OLE DB	Error
A specified value violated the integrity constraints for a column or\r\ntable\r\n	System	265775	OLE DB	Error
The given type name was unrecognized\r\n	System	265776	OLE DB	Error
Execution aborted because a resource limit has been reached; no\r\nresults have been returned\r\n	System	265777	OLE DB	Error
Cannot clone a command object whose command tree contains a rowset\r\nor rowsets\r\n	System	265778	OLE DB	Error
Cannot represent the current tree as text\r\n	System	265779	OLE DB	Error
The specified index already exists\r\n	System	265780	OLE DB	Error
The specified index does not exist\r\n	System	265781	OLE DB	Error
The specified index was in use\r\n	System	265782	OLE DB	Error
The specified table does not exist\r\n	System	265783	OLE DB	Error
The rowset was using optimistic concurrency and the value of a\r\ncolumn has been changed since it was last read\r\n	System	265784	OLE DB	Error
Errors were detected during the copy\r\n	System	265785	OLE DB	Error
A specified precision was invalid\r\n	System	265786	OLE DB	Error
A specified scale was invalid\r\n	System	265787	OLE DB	Error
Invalid table ID\r\n	System	265788	OLE DB	Error
A specified type was invalid\r\n	System	265789	OLE DB	Error
A column ID was occurred more than once in the specification\r\n	System	265790	OLE DB	Error
The specified table already exists\r\n	System	265791	OLE DB	Error
The specified table was in use\r\n	System	265792	OLE DB	Error
The specified locale ID was not supported\r\n	System	265793	OLE DB	Error
The specified record number is invalid\r\n	System	265794	OLE DB	Error
Although the bookmark was validly formed, no row could be found to\r\nmatch it\r\n	System	265795	OLE DB	Error
The value of a property was invalid\r\n	System	265796	OLE DB	Error
The rowset was not chaptered\r\n	System	265797	OLE DB	Error
Invalid accessor\r\n	System	265798	OLE DB	Error
Invalid storage flags\r\n	System	265799	OLE DB	Error
By-ref accessors are not supported by this provider\r\n	System	265800	OLE DB	Error
Null accessors are not supported by this provider\r\n	System	265801	OLE DB	Error
The command was not prepared\r\n	System	265802	OLE DB	Error
The specified accessor was not a parameter accessor\r\n	System	265803	OLE DB	Error
The given accessor was write-only\r\n	System	265804	OLE DB	Error
Authentication failed\r\n	System	265805	OLE DB	Error
The change was canceled during notification; no columns are changed\r\n	System	265806	OLE DB	Error
The rowset was single-chaptered and the chapter was not released\r\n	System	265807	OLE DB	Error
Invalid source handle\r\n	System	265808	OLE DB	Error
The provider cannot derive parameter info and SetParameterInfo has\r\nnot been called\r\n	System	265809	OLE DB	Error
The data source object is already initialized\r\n	System	265810	OLE DB	Error
The provider does not support this method\r\n	System	265811	OLE DB	Error
The number of rows with pending changes has exceeded the set limit\r\n	System	265812	OLE DB	Error
The specified column did not exist\r\n	System	265813	OLE DB	Error
There are pending changes on a row with a reference count of zero\r\n	System	265814	OLE DB	Error
A literal value in the command overflowed the range of the type of\r\nthe associated column\r\n	System	265815	OLE DB	Error
The supplied HRESULT was invalid\r\n	System	265816	OLE DB	Error
The supplied LookupID was invalid\r\n	System	265817	OLE DB	Error
The supplied DynamicErrorID was invalid\r\n	System	265818	OLE DB	Error
Unable to get visible data for a newly-inserted row that has not\r\nyet been updated\r\n	System	265819	OLE DB	Error
Invalid conversion flag\r\n	System	265820	OLE DB	Error
The given parameter name was unrecognized\r\n	System	265821	OLE DB	Error
Multiple storage objects can not be open simultaneously\r\n	System	265822	OLE DB	Error
The requested filter could not be opened\r\n	System	265823	OLE DB	Error
The requested order could not be opened\r\n	System	265824	OLE DB	Error
Bad tuple	System	265825	OLE DB	Error
Bad coordinate	System	265826	OLE DB	Error
The given aixs was not valid for this Dataset	System	265827	OLE DB	Error
One or more of the given cell ordinals was invalid	System	265828	OLE DB	Error
The supplied columnID was invalid	System	265829	OLE DB	Error
The supplied command does not have a DBID	System	265830	OLE DB	Error
The supplied DBID already exists	System	265831	OLE DB	Error
The maximum number of Sessions supported by the provider has already been created. The consumer must release one or more currently held Sessions before obtaining a new Session Object	System	265832	OLE DB	Error
Invalid trustee value	System	265834	OLE DB	Error
The trustee is not for the current data source	System	265835	OLE DB	Error
The trustee does not support memberships/collections	System	265836	OLE DB	Error
The object is invalid or unknown to the provider	System	265837	OLE DB	Error
No owner exists for the object	System	265838	OLE DB	Error
The access entry list supplied is invalid	System	265839	OLE DB	Error
The trustee supplied as owner is invalid or unknown to the provider	System	265840	OLE DB	Error
The permission supplied in the access entry list is invalid	System	265841	OLE DB	Error
The index ID is invalid	System	265842	OLE DB	Error
The initialization string specified does not conform to specificiation	System	265843	OLE DB	Error
The OLE DB root enumerator did not return any providers that matched any of the SOURCES_TYPEs requested	System	265844	OLE DB	Error
The initialization string specifies a provider which does not match the currently active provider	System	265845	OLE DB	Error
Fetching requested number of rows would have exceeded total number\r\nof active rows supported by the rowset\r\n	System	265920	OLE DB	Error
One or more column types are incompatible; conversion errors will\r\noccur during copying\r\n	System	265921	OLE DB	Error
Parameter type information has been overridden by caller\r\n	System	265922	OLE DB	Error
Skipped bookmark for deleted or non-member row\r\n	System	265923	OLE DB	Error
There are no more rowsets\r\n	System	265925	OLE DB	Error
Reached start or end of rowset or chapter\r\n	System	265926	OLE DB	Error
The provider re-executed the command\r\n	System	265927	OLE DB	Error
Variable data buffer full\r\n	System	265928	OLE DB	Error
There are no more results\r\n	System	265929	OLE DB	Error
Server cannot release or downgrade a lock until the end of the\r\ntransaction\r\n	System	265930	OLE DB	Error
Specified weight was not supported or exceeded the supported limit\r\nand was set to 0 or the supported limit\r\n	System	265931	OLE DB	Error
Consumer is uninterested in receiving further notification calls for\r\nthis reason\r\n	System	265932	OLE DB	Error
Input dialect was ignored and text was returned in different\r\ndialect\r\n	System	265933	OLE DB	Error
Consumer is uninterested in receiving further notification calls for\r\nthis phase\r\n	System	265934	OLE DB	Error
Consumer is uninterested in receiving further notification calls for\r\nthis reason\r\n	System	265935	OLE DB	Error
The operation is being processed asynchronously\r\n	System	265936	OLE DB	Error
In order to reposition to the start of the rowset, the provider had\r\nto reexecute the query; either the order of the columns changed or\r\ncolumns were added to or removed from the rowset\r\n	System	265937	OLE DB	Error
The method had some errors; errors have been returned in the error\r\narray\r\n	System	265938	OLE DB	Error
Invalid row handle\r\n	System	265939	OLE DB	Error
A given HROW referred to a hard-deleted row\r\n	System	265940	OLE DB	Error
The provider was unable to keep track of all the changes; the client\r\nmust refetch the data associated with the watch region using another\r\nmethod\r\n	System	265941	OLE DB	Error
Execution stopped because a resource limit has been reached; results\r\nobtained so far have been returned but execution cannot be resumed\r\n	System	265942	OLE DB	Error
A lock was upgraded from the value specified\r\n	System	265944	OLE DB	Error
One or more properties were changed as allowed by provider\r\n	System	265945	OLE DB	Error
Errors occurred\r\n	System	265946	OLE DB	Error
A specified parameter was invalid\r\n	System	265947	OLE DB	Error
Updating this row caused more than one row to be updated in the\r\ndata source\r\n	System	265948	OLE DB	Error
The requested version is unavailable	System	266240	OLE DB	Error
The reconciliation is only partially complete.	System	266241	OLE DB	Error
Reconciliation aborted via abort callback.	System	266242	OLE DB	Error
No callback from the recocniler.	System	266243	OLE DB	Error
The implementation does not support generation of residues.	System	266244	OLE DB	Error
Callee is not the same version as that which created the difference.	System	266245	OLE DB	Error
The document versions are too dissimilar to reconcile.	System	266246	OLE DB	Error
The objects are identical - i.e. further reconciliation would not result in any changes to either object.	System	266247	OLE DB	Error
The destination needs to be changed	System	266248	OLE DB	Error
The destination needs to be changed	System	266249	OLE DB	Error
The destination needs to be changed	System	266250	OLE DB	Error
The task is ready to run at its next scheduled time.\r\n	System	267008	Schedule	Error
The task is currently running.\r\n	System	267009	Schedule	Error
The task will not run at the scheduled times because it has been disabled.\r\n	System	267010	Schedule	Error
The task has not yet run.\r\n	System	267011	Schedule	Error
There are no more runs scheduled for this task.\r\n	System	267012	Schedule	Error
One or more of the properties that are needed to run this task on a schedule have not been set.\r\n	System	267013	Schedule	Error
The last run of the task was terminated by the user.\r\n	System	267014	Schedule	Error
Either the task has no triggers or the existing triggers are disabled or not set.\r\n	System	267015	Schedule	Error
Event triggers don't have set run times.\r\n	System	267016	Schedule	Error
Trigger not found.\r\n	System	267017	Schedule	Error
One or more of the properties that are needed to run this task have not been set.\r\n	System	267018	Schedule	Error
There is no running instance of the task to terminate.\r\n	System	267019	Schedule	Error
The Task Scheduler Service is not installed on this computer.\r\n	System	267020	Schedule	Error
The task object could not be opened.\r\n	System	267021	Schedule	Error
The object is either an invalid task object or is not a task object.\r\n	System	267022	Schedule	Error
No account information could be found in the Task Scheduler security database for the task indicated.\r\n	System	267023	Schedule	Error
Unable to establish existence of the account specified.\r\n	System	267024	Schedule	Error
Corruption was detected in the Task Scheduler security database; the database has been reset.\r\n	System	267025	Schedule	Error
Task Scheduler security services are available only on Windows NT.\r\n	System	267026	Schedule	Error
The task object version is either unsupported or invalid.\r\n	System	267027	Schedule	Error
The task has been configured with an unsupported combination of account settings and run time options.\r\n	System	267028	Schedule	Error
The Task Scheduler Service is not running.\r\n	System	267029	Schedule	Error
The root transaction wanted to commit, but transaction aborted\r\n	System	319490	Class Store	Error
You made a method call on a COM+ component that has a transaction that has already aborted or in the process of aborting.\r\n	System	319491	Class Store	Error
There is no MTS object context\r\n	System	319492	Class Store	Error
The component is configured to use synchronization and a thread has timed out waiting to enter the context.\r\n	System	319494	Class Store	Error
You made a method call on a COM+ component that has a transaction that has already committed or aborted.\r\n	System	319495	Class Store	Error
The specified role was not configured for the application\r\n	System	319500	Class Store	Error
COM+ was unable to talk to the Microsoft Distributed Transaction Coordinator\r\n	System	319503	Class Store	Error
An unexpected error occurred during COM+ Activation.\r\n	System	319521	Class Store	Error
COM+ Activation failed. Check the event log for more information\r\n	System	319522	Class Store	Error
COM+ Activation failed due to a catalog or configuration error.\r\n	System	319523	Class Store	Error
COM+ activation failed because the activation could not be completed in the specified amount of time.\r\n	System	319524	Class Store	Error
COM+ Activation failed because an initialization function failed.  Check the event log for more information.\r\n	System	319525	Class Store	Error
The requested operation requires that JIT be in the current context and it is not\r\n	System	319526	Class Store	Error
The requested operation requires that the current context have a Transaction, and it does not\r\n	System	319527	Class Store	Error
The components threading model has changed after install into a COM+ Application.  Please re-install component.\r\n	System	319528	Class Store	Error
General access denied error\r\n	Application	458757	COM+	Error
Invalid handle\r\n	Application	458758	COM+	Error
Ran out of memory\r\n	Application	458766	COM+	Error
One or more arguments are invalid\r\n	Application	458839	COM+	Error
Attempt to create a class object failed\r\n	System	524289	Class Store	Error
OLE service could not bind object\r\n	System	524290	Class Store	Error
RPC communication failed with OLE service\r\n	System	524291	Class Store	Error
Bad path to object\r\n	System	524292	Class Store	Error
Server execution failed\r\n	System	524293	Class Store	Error
OLE service could not communicate with the object server\r\n	System	524294	Class Store	Error
Moniker path could not be normalized\r\n	System	524295	Class Store	Error
Object server is stopping when OLE service contacts it\r\n	System	524296	Class Store	Error
An invalid root block pointer was specified\r\n	System	524297	Class Store	Error
An allocation chain contained an invalid link pointer\r\n	System	524298	Class Store	Error
The requested allocation size was too large\r\n	System	524299	Class Store	Error
Not all the requested interfaces were available\r\n	System	524306	Class Store	Error
This control panel does not target the required type of profile.	System	527872	OLE DB	Error
The profile data dropped on a control panel cannot be read.  The data is either corrupt or was not read back properly by a controller that wrote part of the data.	System	527873	OLE DB	Error
A controller that can only operate on the local machine was asked to operate on a remote machine.	System	527874	OLE DB	Error
A control failure has occured because a system resource could not be obtained	System	528384	OLE DB	Error
The file is not a valid PDF	System	529152	OLE DB	Error
Bad UID.\r\n	System	589825	SSPI	Error
Bad Hash.\r\n	System	589826	SSPI	Error
Bad Key.\r\n	System	589827	SSPI	Error
Bad Length.\r\n	System	589828	SSPI	Error
Bad Data.\r\n	System	589829	SSPI	Error
Invalid Signature.\r\n	System	589830	SSPI	Error
Bad Version of provider.\r\n	System	589831	SSPI	Error
Invalid algorithm specified.\r\n	System	589832	SSPI	Error
Invalid flags specified.\r\n	System	589833	SSPI	Error
Invalid type specified.\r\n	System	589834	SSPI	Error
Key not valid for use in specified state.\r\n	System	589835	SSPI	Error
Hash not valid for use in specified state.\r\n	System	589836	SSPI	Error
Key does not exist.\r\n	System	589837	SSPI	Error
Insufficient memory available for the operation.\r\n	System	589838	SSPI	Error
Object already exists.\r\n	System	589839	SSPI	Error
Access denied.\r\n	System	589840	SSPI	Error
Object was not found.\r\n	System	589841	SSPI	Error
Data already encrypted.\r\n	System	589842	SSPI	Error
Invalid provider specified.\r\n	System	589843	SSPI	Error
Invalid provider type specified.\r\n	System	589844	SSPI	Error
Provider's public key is invalid.\r\n	System	589845	SSPI	Error
Keyset does not exist\r\n	System	589846	SSPI	Error
Provider type not defined.\r\n	System	589847	SSPI	Error
Provider type as registered is invalid.\r\n	System	589848	SSPI	Error
The keyset is not defined.\r\n	System	589849	SSPI	Error
Keyset as registered is invalid.\r\n	System	589850	SSPI	Error
Provider type does not match registered value.\r\n	System	589851	SSPI	Error
The digital signature file is corrupt.\r\n	System	589852	SSPI	Error
Provider DLL failed to initialize correctly.\r\n	System	589853	SSPI	Error
Provider DLL could not be found.\r\n	System	589854	SSPI	Error
The Keyset parameter is invalid.\r\n	System	589855	SSPI	Error
An internal error occurred.\r\n	System	589856	SSPI	Error
A base error occurred.\r\n	System	589857	SSPI	Error
Provider could not perform the action since the context was acquired as silent.\r\n	System	589858	SSPI	Error
The security token does not have storage space available for an additional container.\r\n	System	589859	SSPI	Error
The profile for the user is a temporary profile.\r\n	System	589860	SSPI	Error
The key parameters could not be set because the CSP uses fixed parameters.\r\n	System	589861	SSPI	Error
Not enough memory is available to complete this request\r\n	Security	590592	Security	Error
The handle specified is invalid\r\n	Security	590593	Security	Error
The function requested is not supported\r\n	Security	590594	Security	Error
The specified target is unknown or unreachable\r\n	Security	590595	Security	Error
The Local Security Authority cannot be contacted\r\n	Security	590596	Security	Error
The requested security package does not exist\r\n	Security	590597	Security	Error
The caller is not the owner of the desired credentials\r\n	Security	590598	Security	Error
The security package failed to initialize, and cannot be installed\r\n	Security	590599	Security	Error
The token supplied to the function is invalid\r\n	Security	590600	Security	Error
The security package is not able to marshall the logon buffer, so the logon attempt has failed\r\n	Security	590601	Security	Error
The per-message Quality of Protection is not supported by the security package\r\n	Security	590602	Security	Error
The security context does not allow impersonation of the client\r\n	Security	590603	Security	Error
The logon attempt failed\r\n	Security	590604	Security	Error
The credentials supplied to the package were not recognized\r\n	Security	590605	Security	Error
No credentials are available in the security package\r\n	Security	590606	Security	Error
The message or signature supplied for verification has been altered\r\n	Security	590607	Security	Error
The message supplied for verification is out of sequence\r\n	Security	590608	Security	Error
No authority could be contacted for authentication.\r\n	Security	590609	Security	Error
The function completed successfully, but must be called again to complete the context\r\n	Security	590610	Security	Error
The function completed successfully, but CompleteToken must be called\r\n	Security	590611	Security	Error
The function completed successfully, but both CompleteToken and this function must be called to complete the context\r\n	Security	590612	Security	Error
The logon was completed, but no network authority was available. The logon was made using locally known information\r\n	Security	590613	Security	Error
The requested security package does not exist\r\n	Security	590614	Security	Error
The context has expired and can no longer be used.\r\n	Security	590615	Security	Error
The supplied message is incomplete.  The signature was not verified.\r\n	Security	590616	Security	Error
The credentials supplied were not complete, and could not be verified. Additional information can be returned from the context.\r\n	Security	590624	Security	Error
The credentials supplied were not complete, and could not be verified. The context could not be initialized.\r\n	Security	590624	Security	Error
The context data must be renegotiated with the peer.\r\n	Security	590625	Security	Error
The buffers supplied to a function was too small.\r\n	Security	590625	Security	Error
The target principal name is incorrect.\r\n	Security	590626	Security	Error
There is no LSA mode context associated with this context.\r\n	Security	590627	Security	Error
The clocks on the client and server machines are skewed.\r\n	Security	590628	Security	Error
The certificate chain was issued by an untrusted authority.\r\n	Security	590629	Security	Error
The message received was unexpected or badly formatted.\r\n	Security	590630	Security	Error
An unknown error occurred while processing the certificate.\r\n	Security	590631	Security	Error
The received certificate has expired.\r\n	Security	590632	Security	Error
The specified data could not be encrypted.\r\n	Security	590633	Security	Error
The specified data could not be decrypted.\r\n\r\n	Security	590640	Security	Error
The client and server cannot communicate, because they do not possess a common algorithm.\r\n	Security	590641	Security	Error
The security context could not be established due to a failure in the requested quality of service (e.g. mutual authentication or delegation).\r\n	Security	590642	Security	Error
An error occurred while performing an operation on a cryptographic message.\r\n	System	593921	SSPI	Error
Unknown cryptographic algorithm.\r\n	System	593922	SSPI	Error
The object identifier is poorly formatted.\r\n	System	593923	SSPI	Error
Invalid cryptographic message type.\r\n	System	593924	SSPI	Error
Unexpected cryptographic message encoding.\r\n	System	593925	SSPI	Error
The cryptographic message does not contain an expected authenticated attribute.\r\n	System	593926	SSPI	Error
The hash value is not correct.\r\n	System	593927	SSPI	Error
The index value is not valid.\r\n	System	593928	SSPI	Error
The content of the cryptographic message has already been decrypted.\r\n	System	593929	SSPI	Error
The content of the cryptographic message has not been decrypted yet.\r\n	System	593930	SSPI	Error
The enveloped-data message does not contain the specified recipient.\r\n	System	593931	SSPI	Error
Invalid control type.\r\n	System	593932	SSPI	Error
Invalid issuer and/or serial number.\r\n	System	593933	SSPI	Error
Cannot find the original signer.\r\n	System	593934	SSPI	Error
The cryptographic message does not contain all of the requested attributes.\r\n	System	593935	SSPI	Error
The streamed cryptographic message is not ready to return data.\r\n	System	593936	SSPI	Error
The streamed cryptographic message requires more data to complete the decode operation.\r\n	System	593937	SSPI	Error
The length specified for the output data was insufficient.\r\n	System	598017	SSPI	Error
An error occurred during encode or decode operation.\r\n	System	598018	SSPI	Error
An error occurred while reading or writing to a file.\r\n	System	598019	SSPI	Error
Cannot find object or property.\r\n	System	598020	SSPI	Error
The object or property already exists.\r\n	System	598021	SSPI	Error
No provider was specified for the store or object.\r\n	System	598022	SSPI	Error
The specified certificate is self signed.\r\n	System	598023	SSPI	Error
The previous certificate or CRL context was deleted.\r\n	System	598024	SSPI	Error
Cannot find the requested object.\r\n	System	598025	SSPI	Error
The certificate does not have a property that references a private key.\r\n	System	598026	SSPI	Error
Cannot find the certificate and private key for decryption.\r\n	System	598027	SSPI	Error
Cannot find the certificate and private key to use for decryption.\r\n	System	598028	SSPI	Error
Not a cryptographic message or the cryptographic message is not formatted correctly.\r\n	System	598029	SSPI	Error
The signed cryptographic message does not have a signer for the specified signer index.\r\n	System	598030	SSPI	Error
Final closure is pending until additional frees or closes.\r\n	System	598031	SSPI	Error
The certificate is revoked.\r\n	System	598032	SSPI	Error
No Dll or exported function was found to verify revocation.\r\n	System	598033	SSPI	Error
The revocation function was unable to check revocation for the certificate.\r\n	System	598034	SSPI	Error
The revocation function was unable to check revocation because the revocation server was offline.\r\n	System	598035	SSPI	Error
The certificate is not in the revocation server's database.\r\n	System	598036	SSPI	Error
The string contains a non-numeric character.\r\n	System	598048	SSPI	Error
The string contains a non-printable character.\r\n	System	598049	SSPI	Error
The string contains a character not in the 7 bit ASCII character set.\r\n	System	598050	SSPI	Error
The string contains an invalid X500 name attribute key, oid, value or delimiter.\r\n	System	598051	SSPI	Error
The dwValueType for the CERT_NAME_VALUE is not one of the character strings.  Most likely it is either a CERT_RDN_ENCODED_BLOB or CERT_TDN_OCTED_STRING.\r\n	System	598052	SSPI	Error
The Put operation can not continue.  The file needs to be resized.  However, there is already a signature present.  A complete signing operation must be done.\r\n	System	598053	SSPI	Error
The cryptographic operation failed due to a local security option setting.\r\n	System	598054	SSPI	Error
No DLL or exported function was found to verify subject usage.\r\n	System	598055	SSPI	Error
The called function was unable to do a usage check on the subject.\r\n	System	598056	SSPI	Error
Since the server was offline, the called function was unable to complete the usage check.\r\n	System	598057	SSPI	Error
The subject was not found in a Certificate Trust List (CTL).\r\n	System	598058	SSPI	Error
None of the signers of the cryptographic message or certificate trust list is trusted.\r\n	System	598059	SSPI	Error
The public key's algorithm parameters are missing.\r\n	System	598060	SSPI	Error
OSS Certificate encode/decode error code base\r\n\r\nSee asn1code.h for a definition of the OSS runtime errors. The OSS\r\nerror values are offset by CRYPT_E_OSS_ERROR.\r\n	System	602112	SSPI	Error
OSS ASN.1 Error: Output Buffer is too small.\r\n	System	602113	SSPI	Error
OSS ASN.1 Error: Signed integer is encoded as a unsigned integer.\r\n	System	602114	SSPI	Error
OSS ASN.1 Error: Unknown ASN.1 data type.\r\n	System	602115	SSPI	Error
OSS ASN.1 Error: Output buffer is too small, the decoded data has been truncated.\r\n	System	602116	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602117	SSPI	Error
OSS ASN.1 Error: Invalid argument.\r\n	System	602118	SSPI	Error
OSS ASN.1 Error: Encode/Decode version mismatch.\r\n	System	602119	SSPI	Error
OSS ASN.1 Error: Out of memory.\r\n	System	602120	SSPI	Error
OSS ASN.1 Error: Encode/Decode Error.\r\n	System	602121	SSPI	Error
OSS ASN.1 Error: Internal Error.\r\n	System	602122	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602123	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602124	SSPI	Error
OSS ASN.1 Error: Unsupported BER indefinite-length encoding.\r\n	System	602125	SSPI	Error
OSS ASN.1 Error: Access violation.\r\n	System	602126	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602127	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602128	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602129	SSPI	Error
OSS ASN.1 Error: Internal Error.\r\n	System	602130	SSPI	Error
OSS ASN.1 Error: Multi-threading conflict.\r\n	System	602131	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602132	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602133	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602134	SSPI	Error
OSS ASN.1 Error: Encode/Decode function not implemented.\r\n	System	602135	SSPI	Error
OSS ASN.1 Error: Trace file error.\r\n	System	602136	SSPI	Error
OSS ASN.1 Error: Function not implemented.\r\n	System	602137	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602138	SSPI	Error
OSS ASN.1 Error: Trace file error.\r\n	System	602139	SSPI	Error
OSS ASN.1 Error: Trace file error.\r\n	System	602140	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602141	SSPI	Error
OSS ASN.1 Error: Invalid data.\r\n	System	602142	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602143	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602144	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602145	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602146	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602147	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602148	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602149	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602150	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602151	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602152	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602153	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602154	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602155	SSPI	Error
OSS ASN.1 Error: Program link error.\r\n	System	602156	SSPI	Error
OSS ASN.1 Error: System resource error.\r\n	System	602157	SSPI	Error
OSS ASN.1 Error: Trace file error.\r\n	System	602158	SSPI	Error
ASN1 Certificate encode/decode error code base.\r\n\r\nThe ASN1 error values are offset by CRYPT_E_ASN1_ERROR.\r\n	System	602368	SSPI	Error
ASN1 internal encode or decode error.\r\n	System	602369	SSPI	Error
ASN1 unexpected end of data.\r\n	System	602370	SSPI	Error
ASN1 corrupted data.\r\n	System	602371	SSPI	Error
ASN1 value too large.\r\n	System	602372	SSPI	Error
ASN1 constraint violated.\r\n	System	602373	SSPI	Error
ASN1 out of memory.\r\n	System	602374	SSPI	Error
ASN1 buffer overflow.\r\n	System	602375	SSPI	Error
ASN1 function not supported for this PDU.\r\n	System	602376	SSPI	Error
ASN1 bad arguments to function call.\r\n	System	602377	SSPI	Error
ASN1 bad real value.\r\n	System	602378	SSPI	Error
ASN1 bad tag value met.\r\n	System	602379	SSPI	Error
ASN1 bad choice value.\r\n	System	602380	SSPI	Error
ASN1 bad encoding rule.\r\n	System	602381	SSPI	Error
ASN1 bad unicode (UTF8).\r\n	System	602382	SSPI	Error
ASN1 bad PDU type.\r\n	System	602419	SSPI	Error
ASN1 not yet implemented.\r\n	System	602420	SSPI	Error
ASN1 skipped unknown extension(s).\r\n	System	602625	SSPI	Error
ASN1 end of data expected\r\n	System	602626	SSPI	Error
The request subject name is invalid or too long.\r\n	Application	606209	Certificate Server	Error
The request does not exist.\r\n	Application	606210	Certificate Server	Error
The request's current status does not allow this operation.\r\n	Application	606211	Certificate Server	Error
The requested property value is empty.\r\n	Application	606212	Certificate Server	Error
The certification authority's certificate contains invalid data.\r\n	Application	606213	Certificate Server	Error
Certificate service has been suspended for a database restore operation.\r\n	Application	606214	Certificate Server	Error
The certificate contains an encoded length that is potentially incompatible with older enrollment software.\r\n	Application	606215	Certificate Server	Error
The requested certificate template is not supported by this CA.\r\n	Application	608256	Certificate Server	Error
The request contains no certificate template information.\r\n	Application	608257	Certificate Server	Error
A system-level error occurred while verifying trust.\r\n	System	614401	SSPI	Error
The certificate for the signer of the message is invalid or not found.\r\n	System	614402	SSPI	Error
One of the counter signatures was invalid.\r\n	System	614403	SSPI	Error
The signature of the certificate can not be verified.\r\n	System	614404	SSPI	Error
The timestamp signature and/or certificate could not be verified or is malformed.\r\n	System	614405	SSPI	Error
The digital signature of the object did not verify.\r\n	System	614416	SSPI	Error
A certificate's basic constraint extension has not been observed.\r\n	System	614425	SSPI	Error
The certificate does not meet or contain the Authenticode financial extensions.\r\n	System	614430	SSPI	Error
Tried to reference a part of the file outside the proper range.\r\n	System	618497	SSPI	Error
Could not retrieve an object from the file.\r\n	System	618498	SSPI	Error
Could not find the head table in the file.\r\n	System	618499	SSPI	Error
The magic number in the head table is incorrect.\r\n	System	618500	SSPI	Error
The offset table has incorrect values.\r\n	System	618501	SSPI	Error
Duplicate table tags or tags out of alphabetical order.\r\n	System	618502	SSPI	Error
A table does not start on a long word boundary.\r\n	System	618503	SSPI	Error
First table does not appear after header information.\r\n	System	618504	SSPI	Error
Two or more tables overlap.\r\n	System	618505	SSPI	Error
Too many pad bytes between tables or pad bytes are not 0.\r\n	System	618506	SSPI	Error
File is too small to contain the last table.\r\n	System	618507	SSPI	Error
A table checksum is incorrect.\r\n	System	618508	SSPI	Error
The file checksum is incorrect.\r\n	System	618509	SSPI	Error
The signature does not have the correct attributes for the policy.\r\n	System	618512	SSPI	Error
The file did not pass the hints check.\r\n	System	618513	SSPI	Error
The file is not an OpenType file.\r\n	System	618514	SSPI	Error
Failed on a file operation (open, map, read, write).\r\n	System	618515	SSPI	Error
A call to a CryptoAPI function failed.\r\n	System	618516	SSPI	Error
There is a bad version number in the file.\r\n	System	618517	SSPI	Error
The structure of the DSIG table is incorrect.\r\n	System	618518	SSPI	Error
A check failed in a partially constant table.\r\n	System	618519	SSPI	Error
Some kind of structural error.\r\n	System	618520	SSPI	Error
Unknown trust provider.\r\n	Application	720897	Certificate Server	Error
The trust verification action specified is not supported by the specified trust provider.\r\n	Application	720898	Certificate Server	Error
The form specified for the subject is not one supported or known by the specified trust provider.\r\n	Application	720899	Certificate Server	Error
The subject is not trusted for the specified action.\r\n	Application	720900	Certificate Server	Error
Error due to problem in ASN.1 encoding process.\r\n	Application	720901	Certificate Server	Error
Error due to problem in ASN.1 decoding process.\r\n	Application	720902	Certificate Server	Error
Reading / writing Extensions where Attributes are appropriate, and visa versa.\r\n	Application	720903	Certificate Server	Error
Unspecified cryptographic failure.\r\n	Application	720904	Certificate Server	Error
The size of the data could not be determined.\r\n	Application	720905	Certificate Server	Error
The size of the indefinite-sized data could not be determined.\r\n	Application	720906	Certificate Server	Error
This object does not read and write self-sizing data.\r\n	Application	720907	Certificate Server	Error
No signature was present in the subject.\r\n	Application	721152	Certificate Server	Error
A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.\r\n	Application	721153	Certificate Server	Error
The validity periods of the certification chain do not nest correctly.\r\n	Application	721154	Certificate Server	Error
A certificate that can only be used as an end-entity is being used as a CA or visa versa.\r\n	Application	721155	Certificate Server	Error
A path length constraint in the certification chain has been violated.\r\n	Application	721156	Certificate Server	Error
A certificate contains an unknown extension that is marked 'critical'.\r\n	Application	721157	Certificate Server	Error
A certificate being used for a purpose other than the ones specified by its CA.\r\n	Application	721158	Certificate Server	Error
A parent of a given certificate in fact did not issue that child certificate.\r\n	Application	721159	Certificate Server	Error
A certificate is missing or has an empty value for an important field, such as a subject or issuer name.\r\n	Application	721160	Certificate Server	Error
A certificate chain processed correctly, but terminated in a root certificate which is not trusted by the trust provider.\r\n	Application	721161	Certificate Server	Error
An internal certificate chaining error has occurred.\r\n	Application	721162	Certificate Server	Error
Generic trust failure.\r\n	Application	721163	Certificate Server	Error
A certificate was explicitly revoked by its issuer.\r\n	Application	721164	Certificate Server	Error
The certification path terminates with the test root which is not trusted with the current policy settings.\r\n	Application	721165	Certificate Server	Error
The revocation process could not continue - the certificate(s) could not be checked.\r\n	Application	721166	Certificate Server	Error
The certificate's CN name does not match the passed value.\r\n	Application	721167	Certificate Server	Error
The certificate is not valid for the requested usage.\r\n	Application	721168	Certificate Server	Error
The certificate was explicitly marked as untrusted by the user.\r\n	Application	721169	Certificate Server	Error
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.\r\n	Application	721170	Certificate Server	Error
A non-empty line was encountered in the INF before the start of a section.\r\n	System	983040	Kernel	Error
A section name marker in the INF is not complete, or does not exist on a line by itself.\r\n	System	983041	Kernel	Error
An INF section was encountered whose name exceeds the maximum section name length.\r\n	System	983042	Kernel	Error
The syntax of the INF is invalid.\r\n	System	983043	Kernel	Error
The style of the INF is different than what was requested.\r\n	System	983296	Kernel	Error
The required section was not found in the INF.\r\n	System	983297	Kernel	Error
The required line was not found in the INF.\r\n	System	983298	Kernel	Error
The files affected by the installation of this file queue have not been backed up for uninstall.\r\n	System	983299	Kernel	Error
The INF or the device information set or element does not have an associated install class.\r\n	System	983552	Kernel	Error
The INF or the device information set or element does not match the specified install class.\r\n	System	983553	Kernel	Error
An existing device was found that is a duplicate of the device being manually installed.\r\n	System	983554	Kernel	Error
There is no driver selected for the device information set or element.\r\n	System	983555	Kernel	Error
The requested device registry key does not exist.\r\n	System	983556	Kernel	Error
The device instance name is invalid.\r\n	System	983557	Kernel	Error
The install class is not present or is invalid.\r\n	System	983558	Kernel	Error
The device instance cannot be created because it already exists.\r\n	System	983559	Kernel	Error
The operation cannot be performed on a device information element that has not been registered.\r\n	System	983560	Kernel	Error
The device property code is invalid.\r\n	System	983561	Kernel	Error
The INF from which a driver list is to be built does not exist.\r\n	System	983562	Kernel	Error
The device instance does not exist in the hardware tree.\r\n	System	983563	Kernel	Error
The icon representing this install class cannot be loaded.\r\n	System	983564	Kernel	Error
The class installer registry entry is invalid.\r\n	System	983565	Kernel	Error
The class installer has indicated that the default action should be performed for this installation request.\r\n	System	983566	Kernel	Error
The operation does not require any files to be copied.\r\n	System	983567	Kernel	Error
The specified hardware profile does not exist.\r\n	System	983568	Kernel	Error
There is no device information element currently selected for this device information set.\r\n	System	983569	Kernel	Error
The operation cannot be performed because the device information set is locked.\r\n	System	983570	Kernel	Error
The operation cannot be performed because the device information element is locked.\r\n	System	983571	Kernel	Error
The specified path does not contain any applicable device INFs.\r\n	System	983572	Kernel	Error
No class installer parameters have been set for the device information set or element.\r\n	System	983573	Kernel	Error
The operation cannot be performed because the file queue is locked.\r\n	System	983574	Kernel	Error
A service installation section in this INF is invalid.\r\n	System	983575	Kernel	Error
There is no class driver list for the device information element.\r\n	System	983576	Kernel	Error
The installation failed because a function driver was not specified for this device instance.\r\n	System	983577	Kernel	Error
There is presently no default device interface designated for this interface class.\r\n	System	983578	Kernel	Error
The operation cannot be performed because the device interface is currently active.\r\n	System	983579	Kernel	Error
The operation cannot be performed because the device interface has been removed from the system.\r\n	System	983580	Kernel	Error
An interface installation section in this INF is invalid.\r\n	System	983581	Kernel	Error
This interface class does not exist in the system.\r\n	System	983582	Kernel	Error
The reference string supplied for this interface device is invalid.\r\n	System	983583	Kernel	Error
The specified machine name does not conform to UNC naming conventions.\r\n	System	983584	Kernel	Error
A general remote communication error occurred.\r\n	System	983585	Kernel	Error
The machine selected for remote communication is not available at this time.\r\n	System	983586	Kernel	Error
The Plug and Play service is not available on the remote machine.\r\n	System	983587	Kernel	Error
The property page provider registry entry is invalid.\r\n	System	983588	Kernel	Error
The requested device interface is not present in the system.\r\n	System	983589	Kernel	Error
The device's co-installer has additional work to perform after installation is complete.\r\n	System	983590	Kernel	Error
The device's co-installer is invalid.\r\n	System	983591	Kernel	Error
There are no compatible drivers for this device.\r\n	System	983592	Kernel	Error
There is no icon that represents this device or device type.\r\n	System	983593	Kernel	Error
A logical configuration specified in this INF is invalid.\r\n	System	983594	Kernel	Error
The class installer has denied the request to install or upgrade this device.\r\n	System	983595	Kernel	Error
One of the filter drivers installed for this device is invalid.\r\n	System	983596	Kernel	Error
The driver selected for this device does not support Windows 2000.\r\n	System	983597	Kernel	Error
The driver selected for this device does not support Windows.\r\n	System	983598	Kernel	Error
The third-party INF does not contain digital signature information.\r\n	System	983599	Kernel	Error
An invalid attempt was made to use a device installation file queue for verification of digital signatures relative to other platforms.\r\n	System	983600	Kernel	Error
The device cannot be disabled.\r\n	System	983601	Kernel	Error
The device could not be dynamically removed.\r\n	System	983602	Kernel	Error
No installed components were detected.\r\n	System	987136	Kernel	Error
An internal consistency check failed.\r\n	System	1048577	SmartCard	Error
The action was cancelled by an SCardCancel request.\r\n	System	1048578	SmartCard	Error
The supplied handle was invalid.\r\n	System	1048579	SmartCard	Error
One or more of the supplied parameters could not be properly interpreted.\r\n	System	1048580	SmartCard	Error
Registry startup information is missing or invalid.\r\n	System	1048581	SmartCard	Error
Not enough memory available to complete this command.\r\n	System	1048582	SmartCard	Error
An internal consistency timer has expired.\r\n	System	1048583	SmartCard	Error
The data buffer to receive returned data is too small for the returned data.\r\n	System	1048584	SmartCard	Error
The specified reader name is not recognized.\r\n	System	1048585	SmartCard	Error
The user-specified timeout value has expired.\r\n	System	1048586	SmartCard	Error
The smart card cannot be accessed because of other connections outstanding.\r\n	System	1048587	SmartCard	Error
The operation requires a Smart Card, but no Smart Card is currently in the device.\r\n	System	1048588	SmartCard	Error
The specified smart card name is not recognized.\r\n	System	1048589	SmartCard	Error
The system could not dispose of the media in the requested manner.\r\n	System	1048590	SmartCard	Error
The requested protocols are incompatible with the protocol currently in use with the smart card.\r\n	System	1048591	SmartCard	Error
The reader or smart card is not ready to accept commands.\r\n	System	1048592	SmartCard	Error
One or more of the supplied parameters values could not be properly interpreted.\r\n	System	1048593	SmartCard	Error
The action was cancelled by the system, presumably to log off or shut down.\r\n	System	1048594	SmartCard	Error
An internal communications error has been detected.\r\n	System	1048595	SmartCard	Error
An internal error has been detected, but the source is unknown.\r\n	System	1048596	SmartCard	Error
An ATR obtained from the registry is not a valid ATR string.\r\n	System	1048597	SmartCard	Error
An attempt was made to end a non-existent transaction.\r\n	System	1048598	SmartCard	Error
The specified reader is not currently available for use.\r\n	System	1048599	SmartCard	Error
The operation has been aborted to allow the server application to exit.\r\n	System	1048600	SmartCard	Error
The PCI Receive buffer was too small.\r\n	System	1048601	SmartCard	Error
The reader driver does not meet minimal requirements for support.\r\n	System	1048602	SmartCard	Error
The reader driver did not produce a unique reader name.\r\n	System	1048603	SmartCard	Error
The smart card does not meet minimal requirements for support.\r\n	System	1048604	SmartCard	Error
The Smart card resource manager is not running.\r\n	System	1048605	SmartCard	Error
The Smart card resource manager has shut down.\r\n	System	1048606	SmartCard	Error
An unexpected card error has occurred.\r\n	System	1048607	SmartCard	Error
No Primary Provider can be found for the smart card.\r\n	System	1048608	SmartCard	Error
The requested order of object creation is not supported.\r\n	System	1048609	SmartCard	Error
This smart card does not support the requested feature.\r\n	System	1048610	SmartCard	Error
The identified directory does not exist in the smart card.\r\n	System	1048611	SmartCard	Error
The identified file does not exist in the smart card.\r\n	System	1048612	SmartCard	Error
The supplied path does not represent a smart card directory.\r\n	System	1048613	SmartCard	Error
The supplied path does not represent a smart card file.\r\n	System	1048614	SmartCard	Error
Access is denied to this file.\r\n	System	1048615	SmartCard	Error
An attempt was made to write more data than would fit in the target object.\r\n	System	1048616	SmartCard	Error
There was an error trying to set the smart card file object pointer.\r\n	System	1048617	SmartCard	Error
The supplied PIN is incorrect.\r\n	System	1048618	SmartCard	Error
An unrecognized error code was returned from a layered component.\r\n	System	1048619	SmartCard	Error
The requested certificate does not exist.\r\n	System	1048620	SmartCard	Error
The requested certificate could not be obtained.\r\n	System	1048621	SmartCard	Error
Cannot find a smart card reader.\r\n	System	1048622	SmartCard	Error
A communications error with the smart card has been detected.  Retry the operation.\r\n	System	1048623	SmartCard	Error
The reader cannot communicate with the smart card, due to ATR configuration conflicts.\r\n	System	1048677	SmartCard	Error
The smart card is not responding to a reset.\r\n	System	1048678	SmartCard	Error
Power has been removed from the smart card, so that further communication is not possible.\r\n	System	1048679	SmartCard	Error
The smart card has been reset, so any shared state information is invalid.\r\n	System	1048680	SmartCard	Error
The smart card has been removed, so that further communication is not possible.\r\n	System	1048681	SmartCard	Error
Access was denied because of a security violation.\r\n	System	1048682	SmartCard	Error
The card cannot be accessed because the wrong PIN was presented.\r\n	System	1048683	SmartCard	Error
The card cannot be accessed because the maximum number of PIN entry attempts has been reached.\r\n	System	1048684	SmartCard	Error
The end of the smart card file has been reached.\r\n	System	1048685	SmartCard	Error
The action was cancelled by the user.\r\n	System	1048686	SmartCard	Error
Errors occurred accessing one or more objects - the ErrorInfo collection may have more detail\r\n	System	1115137	COMPLUS	Error
One or more of the object's properties are missing or invalid\r\n	System	1115138	COMPLUS	Error
The object was not found in the catalog\r\n	System	1115139	COMPLUS	Error
The object is already registered\r\n	System	1115140	COMPLUS	Error
Error occurred writing to the application file\r\n	System	1115143	COMPLUS	Error
Error occurred reading the application file\r\n	System	1115144	COMPLUS	Error
Invalid version number in application file\r\n	System	1115145	COMPLUS	Error
The file path is invalid\r\n	System	1115146	COMPLUS	Error
The application is already installed\r\n	System	1115147	COMPLUS	Error
The role already exists\r\n	System	1115148	COMPLUS	Error
An error occurred copying the file\r\n	System	1115149	COMPLUS	Error
One or more users are not valid\r\n	System	1115151	COMPLUS	Error
One or more users in the application file are not valid\r\n	System	1115152	COMPLUS	Error
The component's CLSID is missing or corrupt\r\n	System	1115153	COMPLUS	Error
The component's progID is missing or corrupt\r\n	System	1115154	COMPLUS	Error
Unable to set required authentication level for update request\r\n	System	1115155	COMPLUS	Error
The identity or password set on the application is not valid\r\n	System	1115156	COMPLUS	Error
Application file CLSIDs or IIDs do not match corresponding DLLs\r\n	System	1115160	COMPLUS	Error
Interface information is either missing or changed\r\n	System	1115161	COMPLUS	Error
DllRegisterServer failed on component install\r\n	System	1115162	COMPLUS	Error
No server file share available\r\n	System	1115163	COMPLUS	Error
DLL could not be loaded\r\n	System	1115165	COMPLUS	Error
The registered TypeLib ID is not valid\r\n	System	1115166	COMPLUS	Error
Application install directory not found\r\n	System	1115167	COMPLUS	Error
Errors occurred while in the component registrar\r\n	System	1115171	COMPLUS	Error
The file does not exist\r\n	System	1115172	COMPLUS	Error
The DLL could not be loaded\r\n	System	1115173	COMPLUS	Error
GetClassObject failed in the DLL\r\n	System	1115174	COMPLUS	Error
The DLL does not support the components listed in the TypeLib\r\n	System	1115175	COMPLUS	Error
The TypeLib could not be loaded\r\n	System	1115176	COMPLUS	Error
The file does not contain components or component information\r\n	System	1115177	COMPLUS	Error
Changes to this object and its sub-objects have been disabled\r\n	System	1115178	COMPLUS	Error
The delete function has been disabled for this object\r\n	System	1115179	COMPLUS	Error
The server catalog version is not supported\r\n	System	1115180	COMPLUS	Error
The component move was disallowed, because the source or destination application is either a system application or currently locked against changes\r\n	System	1115181	COMPLUS	Error
The component move failed because the destination application no longer exists\r\n	System	1115182	COMPLUS	Error
The system was unable to register the TypeLib\r\n	System	1115184	COMPLUS	Error
This operation can not be performed on the system application\r\n	System	1115187	COMPLUS	Error
The component registrar referenced in this file is not available\r\n	System	1115188	COMPLUS	Error
A component in the same DLL is already installed\r\n	System	1115189	COMPLUS	Error
The service is not installed\r\n	System	1115190	COMPLUS	Error
One or more property settings are either invalid or in conflict with each other\r\n	System	1115191	COMPLUS	Error
The object you are attempting to add or rename already exists\r\n	System	1115192	COMPLUS	Error
The registration file is corrupt\r\n	System	1115195	COMPLUS	Error
The property value is too large\r\n	System	1115196	COMPLUS	Error
Object was not found in registry\r\n	System	1115198	COMPLUS	Error
This object is not poolable\r\n	System	1115199	COMPLUS	Error
A CLSID with the same GUID as the new application ID is already installed on this machine\r\n	System	1115206	COMPLUS	Error
A role assigned to a component, interface, or method did not exist in the application\r\n	System	1115207	COMPLUS	Error
You must have components in an application in order to start the application\r\n	System	1115208	COMPLUS	Error
This operation is not enabled on this platform\r\n	System	1115209	COMPLUS	Error
Application Proxy is not exportable\r\n	System	1115210	COMPLUS	Error
Failed to start application because it is either a library application or an application proxy\r\n	System	1115211	COMPLUS	Error
System application is not exportable\r\n	System	1115212	COMPLUS	Error
Can not subscribe to this component (the component may have been imported)\r\n	System	1115213	COMPLUS	Error
Only COM+ applications marked "queued" can be created using the "queue" moniker.\r\n	System	1115648	COMPLUS	Error
At least one interface must be marked 'queued" in order to create a queued component instance with the "queue" moniker.\r\n	System	1115649	COMPLUS	Error
MSMQ, which is required for the requested operation, is not installed.\r\n	System	1115650	COMPLUS	Error
One of the objects being inserted or updated does not belong to a valid parent collection\r\n	System	1116168	COMPLUS	Error
One of the specified objects cannot be found\r\n	System	1116169	COMPLUS	Error